Search

In society, there is widespread and growing acceptance of the value of cooperation between industry and universities being collaborative Research and Development (R&D) domain and industrial policy the fuel of knowledge-based economies. In this paper, different domains of cooperation between the University and Industry as well as their generated benefits for each partner are identified. These benefits have been assigned to each domain of cooperation, showing a large number of benefits associated to collaborative R&D. Leading us to make a statement - collaborative R&D is the key cooperation domain for sustainable long-term university-industry partnerships. Suggestions are given about how to continue this research study.

Abstract writing is a very important since it is the piece of formal writing which should attract the attention of the reader and make him/her read the rest of the paper. Thus, it must be clear, concise, coherent, and powerful enough to attract the reader and provide him/her with the key information about the content of a research paper. All university students have to write an abstract in English in their qualification papers. However, non-native students of English usually have difficulties in writing an abstract in English. For example, the Czech students lack formal writing skills in English since the skill of formal writing is not developed enough in their native language, i.e. Czech. Therefore, the aim of this article is to discuss the use of an off-line scaffolding tool, which can help students develop an abstract in English, as well as to demonstrate how this tool can be incorporated in the whole Course of Practical English taught at the Faculty of Informatics and Management of the University of Hradec Kralove in the Czech Republic. The application was developed for students as support to a face-to-face class instruction, which proved to be insufficient in teaching students how to write an abstract in English. The application reflects the structure and sentence functions of the abstract and provides students with a model abstract, as well as with additional formulations. Overall, the application was designed with the purpose to enhance student’s skill of writing an abstract in English, as well as to lead students to successfully complete the task by making the application user-friendly - easy-to-use, accessible and transferrable as far as the knowledge is concerned. The application aims to enhance students’ autonomous learning by tailoring the content to their specific needs and making it accessible anytime and from anywhere.

Success management can bring valuable contributions to improve project results and stakeholders’ relationships. However, the success management process must be explicitly integrated into project management approaches, guides and methodologies (such as PMBOK, PRINCE2 or PM2), which is not currently happening. The purpose of this position paper is to discuss the need and importance for this integration and to present a first proposal on how this can be operationalized. To support the position, the methodology of the European Union PM2 was used. The result of the integration demonstrates that it is possible to advance management and raise the level of project success.

The oil impregnated paper capacitance graded transformer bushings serves as the external connection device of the transformer to support and connect the insulation, and its insulation state is related to the safe and stable operation of substation equipment.In this paper, a simulation model of 110kV oil impregnated paper capacitance graded transformer bushings is constructed on the commercial finite element software platform based on the actual size of the bushing and the principle of equal capacitance and steps. The paper calculate the potential and radial electric field distribution of the bushing under the normal working voltage, and analyze the influence of the aluminum plate on the radial electric field distribution of the bushing, verifying the rationality of the design principle based on equal capacitance and steps.

The remarkable increase in the number of authors and publications is observed in almost all fields in last decade. Inherently publication engages process of peer review and is a vital segment in research and development progression. The Reviewer Assignment Problem (RAP) is one of the most important and apparent process that involves the process of assigning a reviewer to paper. RAP has motivated many researchers in the recent decade as the conference organizers and journal editors are demanding for automatic assignment with fair and accurate reviews. Fair and accurate reviews mostly depend on accurate expert assignment to the paper. RAP entails two core phases: matching submitted manuscript and experts, and expert assignment to paper for review. Matching manuscript and expert involves building both paper and expert profiles correctly and then matching them accurately. Similarly assigning an expert to paper accurately involves solving assignment problem by satisfying constraints like a conflict of interest, fulfilling coverage requirements and balancing the load of the expert reviewer. Many researchers have contributed to the topic by proposing solutions for RAP. Each proposed methodology necessitates using an appropriate performance metric for proving its effectiveness. In the case of RAP, we can measure the performance of the whole process; one can measure the performance of the core phases separately as both phases engross different processes and different metric. Testing performance and reducing errors in phases will lead to overall improved results. Both subjective (also known as qualitative) and objective (also known as quantitative) measures have been practiced by the researchers. In this paper, we present trends in using performance measures, their applicability and suitability for RAP. It is observed that ‘Unanimity’ is the most appropriate measure for the overall review process. Use of performance measures- matching score, authority, coverage, and diversity are the most suitable for measuring the performance of phase one- matching paper and reviewer. It is noticed that load balance, fairness and accuracy are suitable for measuring the performance of phase two that assigns a reviewer to paper by satisfying constraints. The study derives the conclusion that hybrid approach with the proper combination of these measures is the best for measuring the performance of process of assigning reviewer to the paper.

Insert here your abstract text.

Dyslexia is a type of Specific Learning Disability (SLD) that affects the educational development of a student, as it is the reason of difficulties not only in writing or reading but also in other disciplines like Mathematics. Research has proven that Information and Communication Technologies (ICT) can have a positive effect to the educational development of a dyslexic student. In this paper, twenty 6th-grade primary-school students were observed while using computers during exams - ten with Dyslexia and ten with no SLDs. All students were called to solve a digital test and a paper test that were including some basic mathematic operations. The researcher recorded and examined the differences between the results from the two tests. Descriptive and deductive statistical analysis showed that students had better results when examined via a computer compared to a traditional written examination.

The subsector of pulp and paper presented in 2013 an electric power consumption of 9.3% of electricity consumption in the industrial sector in Brazil. It experienced a significant growth of production in the last 20 years, exceeding 160%, and their consumption of electricity increased by 130%, reaching the level of 19,594GWh. Due to its characteristics, with a known structure and production processes, and its importance in the country's industrial sector, this subsector was selected for study in this paper, to evaluate the behavior of its long-term annual electricity demand, at the horizon of 20 years ahead, in energy efficiency scenarios through bottom-up approach. This approach is data intensive and requires data with good quality; it consists of a hierarchical structure that enables to check how specific actions can affect the results at each level and its effect on higher levels.

In a paper introduction presentation of scientific papers, the presenter needs to understand the contents of a paper, summarizes them by slides and explains them to the audiences, such as participants the paper introduction activity, and discuss the contents with participants. However, if the presenter does not have enough skills for reading the contents deeply or for creating understandable slides, participants are not able to get the importance of the paper precisely and do not have fruitful discussion. For such situation, participants give questions to understand the paper. Therefore, questions regarding to the contents from other participants implicitly suggest problems with the presenter’s understanding of the paper and creating the slides. Therefore, it is valuable for the presenter to reflect on their skills that are used to prepare the paper introduction presentation based on the questions asked by other participants. This research proposes a reflection support environment for promoting the active and sufficient reflection using the questions asked by other participants. Our environment prepares an interface that records the activities involved in preparing the presentation, such as understanding papers and creating slides. Our environment also provides an interface with which the presenter can compare the recorded activities and the participants’ questions. By comparing the questions with their understanding of papers and created slides, the presenter is encouraged to recognize the insufficient points of their reading and presentation methods.

Paper currency recognition (PCR) is an important area of pattern recognition. A system for the recognition of paper currency is one kind of intelligent system which is a very important need of the current automation systems in the modern world of today. It has various potential applications including electronic banking, currency monitoring systems, money exchange machines, etc. This paper proposes an automatic paper currency recognition system for paper currency. A method of recognizing paper currencies has been introduced. This is based on interesting features and correlation between images. It uses Radial Basis Function Network for classification. The method uses the case of Saudi Arabian paper currency as a model. The method is quite reasonable in terms of accuracy. The system deals with 110 images, 10 of which are tilted with an angle less than 15o. The rest of the currency images consist of mixed including noisy and normal images 50 each. It uses fourth series (1984–2007) of currency issued by Saudi Arabian Monetary Agency (SAMA) as a model currency under consideration. The system produces accuracy of recognition as 95.37%, 91.65%, and 87.5%, for the Normal Non-Tilted Images, Noisy Non-Tilted Images, and Tilted Images respectively. The overall Average Recognition Rate for the data of 110 images is computed as 91.51%. The proposed algorithm is fully automatic and requires no human intervention. The proposed technique produces quite satisfactory results in terms of recognition and efficiency.

Considering the total number of citations as the sole indicator of a research paper’s success is not always correct. Furthermore, considering the total number of reads (downloads, views, and usage) is not always correct either. Therefore, this paper proposes a new measure called paper impact effectiveness (PIE) that combines both indicators to evaluate the impact of research papers in order to provide a more realistic and fair indicator. Therefore, the total number of downloads for the most popular papers, selected from a single journal, in addition to total citations from Google Scholar were obtained to prove this paper’s argument. Universities, research ranking agencies, and researchers can use the PIE value to assess the impact (i.e., value) of research papers.

The omnipresent pervasiveness of personal devices will expand the applicability of the Dynamic Data Driven Application Systems (DDDAS) paradigm in innumerable ways. While every single smartphone or wearable device is potentially a sensor with powerful computing and data capabilities, privacy and security in the context of human participants must be addressed to leverage the infinite possibilities of dynamic data driven application systems. We propose a security and privacy preserving framework for next generation systems that harness the full power of the DDDAS paradigm while (1) ensuring provable privacy guarantees for sensitive data; (2) enabling field-level, intermediate, and central hierarchical feedback-driven analysis for both data volume mitigation and security; and (3) intrinsically addressing uncertainty caused either by measurement error or security-driven data perturbation. These thrusts will form the foundation for secure and private deployments of large scale hybrid participant-sensor DDDAS systems of the future.

In this expository work, we sketch some applications of annotated logics. Such logics were discovered in the late 1980s and nowadays have become one of the most fertile logics for applications. They constitute a two-sorted logic, and they are paraconsistent and in general paracomplete and non-alethic logics.

There are a number of issues which are involved with organizing a conference. Among these issues, assigning conference-papers to reviewers is one of the most difficult tasks. Assigning conference-papers to reviewers is automatically the most crucial part. In this paper, we address this issue of paper-to-reviewer assignment, and we propose a method to model the reviewers, based on the matching degree between the reviewers and the papers by combining a preference-based approach and a topic-based approach. We explain the assignment algorithm and show the evaluation results in comparison with the Hungarian algorithm.

Lepton is an automaton for literate executable papers. It enables researchers to publish their work in the form of a script or program that can generate the research paper along with the corresponding source code, input data and output results. Lepton files do not contain pre-computed results, but the full set of instructions for reproducing the results presented in the manuscript. Taking inspiration from literate programming for code review and code re-use, we have written Lepton to facilitate the review and re-use of computational methods. Lepton is designed to provide strong guarantees for the reproducibil-ity of the results, many features for easily applying the methods to new data while remaining unobtrusive and easy to deploy in any environment. Lepton is designed for writing reproducible technical reports during method development, and journal manuscripts when the research is polished. Developped independently from the Elsevier Executable Paper Grand Challenge, it addresses similar issues and objectives. This manuscript was written with Lepton.

For centuries, the research paper have been the main vehicle for scientific progress. From the paper, readers in the scientific community are expected to extract all the relevant information necessary to reproduce and validate the results presented by the paper's authors. However, the increased use of computer software in science makes reproducing scientific results increasingly difficult. The research paper in its current state is no longer sufficient to fully reproduce, validate, or review a paper's experimental results and conclusions. This impedes scientific progress. To remedy these concerns, we introduce PaperMâche, a new system for creating dynamic, executable research papers. The key novelty of PaperMâche is its use of virtual machines, which lets readers and reviewers easily view and interact with a paper, and reproduce key experimental results. For authors, the Paper Mâche workbench provides an easy-touse interface to build an executable paper. By transforming the static research paper into a dynamic and interactive entity, Paper Mâche brings the presentation of scientific results into the 21st century. We believe that Paper Mâche will become indispensable to the scientific process, and increase the visibility of key findings among members and non-members of the scientific community.

Standard computing will be characterized as a functional extension of syntax. Using BICA claim of continuity between human-animal-robot cognitive architectures, we will define strong semantics as the ability of a cognitive architectures to consult cognitive maps, in particular phenomenal content maps (Damasio, 2010). This follows the work on semantic maps, yet the maps we postulate are based on phenomenal markers not syntax and predicative logic. We define extra strong semantic maps (and extra strong computing in general) as those that go beyond human capabilities. The goal of strong semantic computing in autonomous robotics should be to ‘know what is going on’ (Sanz, 2012) before engaging in detailed logical analysis. Such sort of Gestalt computing is needed in advanced autonomous robotics, especially robots functioning in human environments.

This paper presents results of topic modeling and network models of topics using the ICCS corpus, which contains domain-specific (computational science) papers over sixteen years (a total of 5695 papers). We discuss topical structures of ICCS, how these topics evolve over time in response to the topicality of various problems, technologies and methods, and how all these topics relate to one another. This analysis illustrates multidisciplinary research and collaborations among scientific communities, by constructing static and dynamic networks from the topic modeling results and the authors’ keywords. The results of this study give insights about the past and future trends of core discussion topics in computational science. We used the Non-negative Matrix Factorization(NMF) topic modeling algorithm to discover topics and labeled and grouped results hierarchically. We used Gephi to study static networks of topics, and an R library called DyA to analyze the dynamic networks of topics.

The paper introduces a new taxonomy of ill-posed parametric inverse problems, formulated as global optimization ones. It systematizes irremediable problems, which appear quite often in the real life but cannot be solved using the regularization method. The paper also shows a new way of solving irremediable inverse problems by a complex memetic approach including: genetic computation with adaptive accuracy, random sample clustering and a sophisticated local approximation of misfit plateau regions. Finally, we use a benchmark function featuring cross-shaped plateau to discuss some factors that influence the quality of plateau shape approximation.

In advanced missions, handling thin and soft membranes is difficult for robots. This task is composed of several sub-tasks, including turning and removing a sheet from a pile of papers on a table, folding paper, and sticking two pieces of paper together. In this study, a hand robot turns and removes a sheet from a pile of papers, and ensures that only one sheet is grasped. To perform this task, two robotic fingers compress the piled papers in the normal direction of the table with a specific force as they close. We therefore incorporated position-based force control into our system; for the force controller, we adopted stiffness control that calculates position modification proportionally to the difference between the target force and an external force measured by the tactile sensor. With this controller, the robot was able to remove a sheet from a pile of papers and ensure that only one sheet was removed. Using this discrimination, the maximum-minimum shearing forces are better classified than with normal force distribution deviation.

Research collaboration is very important in the modern scientific world, because it provides a wide range of opportunities, from the knowledge transfer between departments, institutions or even countries, to experimental research, where scientists also share materials and equipment. Because of that the field of building and analyzing collaboration networks grows in popularity. In this work we propose the methodology of building a hybrid Scientific similarity network based on the features obtained from two leading Scientific platforms – ResearchGate and Scopus. Experimental evaluation demonstrates good quality of the proposed approach and ability of the hybrid network to generate interconnections not distinguishable when using a single network.

Small area femtocell increases the energy efficiency of the cellular network as the distance between base station and user is very less. Mobile femtocell causes the spectrum reuse to be used at very large extent making spectral efficiency suffer. This paper discusses recently researched techniques that have been used to increase the spectral efficiency in mobile femtocell network. But these techniques also come with their own limitations. Considering this, data aggregation and compression technique can be consider as one of the best contender to increase the spectral efficiency in cellular network which is also been explained in this paper.

Open source software (OSS) is a software product with the source code made public so that anyone can read, analyze, and change or improve the code. The use of this software is under a license, like Apache, GNU, MIT, Mozilla Public, and Eclipse Public License. Open source software development (OSSD) provides high quality assurance through user testing and peer reviews. The quality of these products depends on the size of the product community. This paper discusses the stakeholders of the OSS community, the quality assurance frameworks and models proposed in some studies, some statistics about OSS, the problems that affect the quality of OSSD, and the advantages and disadvantages of OSS compared to closed source software. This allows us to understand how we can achieve and improve the quality assurance and quality control of OSSD.

We are investigating the use of natural user interfaces (NUI) applied to information and communication technologies (ICT) supporting workplace dynamics in partnership with mental health providers at a hospital in Brazil. We are using a participatory design (PD) process to uncover their paper-based workflow, defined here as paper user interface workflow (PUI) and their appropriation of mobile technologies supporting patients’ socialization process. We chose this group as they have no experience with graphical user interface (GUI) based interaction, are highly nomadic, have a refined workflow, have a high level of interdependence and are appropriating mobile technologies and social media into their workplace; thus, we believe their perspective within a PD setting provide unique insights into NUI design to provide high fidelity data and real time communication, enhancing data accessibility and fidelity on communication among the professionals. Our PD process has produced workflow representations and we are presenting two scenarios; from them we are proceeding to low- fidelity prototyping.

Reviewing the computational part of scientific papers puts a lot of effort on referees: even if authors provide their data and code the referee often needs to install additional software on his machine and figure out which parts of the code belong to which part of the manuscript. As a result, computational results or often not reviewed at all. We propose a new web service which outsources validation of computational results in executable papers to an independent third party. Our system adapts the well-tested toolbox currently checking R extension packages in software repositories like CRAN to check manuscripts in paper repositories. In addition, paper packages can easily be downloaded from the server and installed to replicate results locally by anyone wishing to do so.

The paper describes a system for executable papers for publishers enabling them to reuse content and to generate further advances of science and engineering. The executable algorithmic descriptions within a paper are presented in natural language sentences and basic code, thereby making long term compatibility absolute. Authors are required to use publicly numerical libraries on the Internet or references to publications with executable papers. As used by authors the system automatically creates a web of algorithmic knowledge on the Internet. Novelty of new algorithms in publications can be evaluated by automated tools available to authors, reviewers and readers of scientific papers published.

We present the Lab Wiki, an executable paper platform primarily designed but not limited to networking experiment-based research. The LabWiki leverages the current state of the art tools for the orchestration of experiments in the networking community and propose a new approach to execute and reproduce experiments. We demonstrate the usability of the LabWiki through an example at the boundary between network and high performance computing researches.

Linked Open Science is an approach to solve challenges of an executable paper. It is a combination of four “silver bullets”: 1) publication of scientific data, metadata, results, and provenance information using Linked Data principles, 2) open source and web-based environments for executing, validating and exploring research, 3) Cloud Computing for effcient and distributed computing, and 4) Creative Commons for the legal infrastructure. We will use a realistic scientific research setting related to research on deforestation of the Brazilian Amazon rainforest to provide scenarios to illustrate the application of Linked Open Science.

International audience; This proposal describes how data, program code, and presentation can be stored together in a single file suitable for electronic publication and permitting the reproduction of computational results.. Universality, effciency, platformindependence, automated verifiability, and provenance tracking are the major design criteria. Existing and well-tested technology is used as much as possible, the two major building blocks being the Hierarchical Data Format for storage and the Java Virtual Machine for platform-independent code representation and secure execution.

In this work we describe the design of our simulation tool for solid state lasers. The software is based on modules to simplify several complex processes. Primarily, the adaptation of laser physics (e.g. thermal lensing, optical wave) with the appropriate simulation technique. Another aspect is to provide the possibility of exchanging the applied calculation methods or even to change the representation of the computational domain on demand.

Image acquisition has great influence on the performance of any computer vision application. Different methods can be utilized to acquire the digital image of a paper, whilst scanning scheme is among the most attractive methods. This attractiveness is because of the fewer types of potential deformations and the low cost of the scanning devices, e.g. flatbed scanners. However, paper is commonly placed imperfectly on the scanner. This slight rotation is not usually based on a pivot around the paper's geometrical center (the well known regular rotation) but instead it is based on a pivot placed at the corner of the paper. Thus, the result is a digital image that is deformed with an “irregular rotation”. The characteristic of this deformation phenomenon is currently unknown to computer vision scientists. In this paper we provide an extensive investigation of this deformation. In addition, a new set of equations that sway and measure the transformation is proposed. Our investigation leads to the conclusion that the “irregular rotation” phenomenon produces a shear transformation. Furthermore, the experimental results confirm the theoretical findings.

Adessowiki is a collaborative platform for scientific programming and document writing. It is a wiki environment that carries simultaneously documentation, programming code and results of its execution without any software con- figuration such as compilers, libraries and special tools at the client side. This combination of a collaborative wiki environment, central server and execution of code at rendering time enables the use of Adessowiki as an executable paper platform, since it fulfills the need to disseminate, validate, and archive research data.

The requirements of public administration institutions are increasing and projects becoming progressively challenging. Managing a project is a complex activity, in particular when it involves many people working over long periods of time and many different stakeholders. This increasing complexity requires management practices and tools that assure an efficient use of resources. In this context, a Project Management Office (PMO) can be of great value. In this position paper we discuss several scenarios for PMO implementation in the public administration sector, as a promoter of project success and a key ingredient for a better resources usage., info:eu-repo/semantics/publishedVersion

This paper will provide an insight into the design and software engineering aspects of a simulation software for time-harmonic electro-magnetic waves with application to the simulation of optical waves in lithography and thin-film solar cells. This design is oriented towards applicability to large systems, as it is driven by the computationally challenging need to simulate large structures in order to tackle real-world problems. We will present an overview of the organizational aspects and the interaction of the components involved.

We present Open Review, a web-based platform aimed at stimulating executable papers by means of post-publication peer-review. Its goal is to bring computer science researchers to collaboratively build their work upon previous research results, in such a way that transparency, reproducibility and sustainability of research results are greatly improved. The main design goals of the platform are clarity, conciseness, and reproducibility. Its main features are to: (i) provide incentives for making research communities to participate, (ii) make papers executable by means of boards’ annotations, without necessarily involving the authors of an article, and (iii) give snapshots of the current research state on any given article.

What is the nature of knowledge representation needed for human-level artificial intelligence? This position paper contends that to achieve human-level AI, a system architecture for human-level knowledge representation would benefit from a neuro-symbolic approach combining deep neural networks with a ‘natural language of thought’ and would be greatly handicapped if relying only on formal logic systems.

We conduct a comparative life cycle assessment of two business card options: a smartphone software and the common paper- based alternative. Life cycle impacts of production, distribution and use of business cards were compared and contrasted for both systems. Given the prevalence and multifunctionality of digital devices and services, we analyze the environmental impacts of the two systems and evaluate their total energy consumption, Greenhouse Gas (GHG) emissions and toxic releases by conducting a two-stage life cycle assessment with alternating functional units. The results indicate that, for a small-scale functional unit, the paper-based business card system causes slightly less environmental impact and has lower energy demand than the software-based (digital) business card system. Whereas when considering the more likely, large scale (real world scenario) functional unit, the digital business card system is more environmentally friendly and economical in terms of energy consumption. By comparing these two systems, this paper serves businesses and consumers when considering environmental consequences and energy depletion of their business networking options.

Patients with advanced-stage cancer often have a high symptom burden and reduced functional status, implying that the patients themselves should be involved in development and testing of interactive assessment tools. This paper reports on an assessment of use of a pain tool, which led to changes in both medium and program in order to adapt to the patients’ needs and abilities. Our study shows how a change in medium for pain assessment from paper via laptop to iPad affects the interaction with the tool on important aspects of use. We also show how changes of medium affect the readability of the output for health care workers. We achieved better results with an iPad-based pain assessment tool developed through user-centered design compared to both a paper-based and conventional laptop-based tool.

Wireless Sensor Networks (WSNs) have been mainly utilized in military applications due to its certainty and efficiency. Nowadays, it is considered to be the first-hand in many civilian applications such as leakage detection. Various technical issues, like power consumption, radio propagation models and sensors need to be considered for different types of applications. WSN has emerged lately as an effective solution for fluid leakage. This paper will discuss four different solutions for leaks in pipelines using wireless sensor networks (WSNs). The WSN-based solutions are magnetic induction based, continuous pressure monitoring, underground to above ground radio propagation and wireless signal networks (WSiN).

Unimodal biometric systems are susceptible to a variety of problems such as noisy data, intra-class variations, limited degrees of freedom, non-universality, spoof attacks and unacceptable error rates. Some of these limitations can be addressed by deploy multimodal biometric systems that integrates the evidence presented by multiple sources of information The proposed system provides effective fusion scheme that combines information presented by the multiple domain experts based on the Rank level fusion integration method, thereby increasing the efficiency of the system which is not possible by the unimodal biometric system. The proposed multimodal biometric system has a number of unique qualities, including principal component analysis and fisher's linear discriminate methods for individual matchers authentication. The novel rank level fusion method is used in order to consolidate the results obtained from different biometric matchers.

This research focuses on determining the potential of biogas generation for combustion from the Zungo pig manure (manure mixture of the three sizes of the pig in a proportion of 33.33% for each size) located in the department of the Atlantic-Colombia. The properties of the biogas obtained were evaluated with a gas analyzer and a chromatograph, demonstrating that, under controlled temperature conditions, after the bio digestion of Zungo pig manure there is a methane content greater than 50%, which is acceptable demonstrating that this biogas is flammable. It was also established that there is a correlation between pH and methane content in biogas, so it is required to control it in the process. Esta investigación se enfoca en determinar el potencial de generación de biogás para combustión a partir del estiércol de cerdo Zungo (mezcla de estiércol de los tres tamaños del cerdo en una proporción de 33,33% para cada tamaño) ubicado en el departamento del Atlántico-Colombia. Las propiedades del biogás obtenido se evaluaron con un analizador de gases y un cromatógrafo, demostrando que, en condiciones de temperatura controlada, luego de la biodigestión del estiércol de cerdo Zungo existe un contenido de metano superior al 50%, lo cual es aceptable demostrando que este biogás es inflamable. También se estableció que existe una correlación entre el pH y el contenido de metano en el biogás, por lo que se requiere controlarlo en el proceso.

Shredded document recovery is an important research sub-field of information security. The paper document is broken into a large number of similar shreds by the shredder. Usually these shreds imply some important information. If they are restored, it will have an important impact on judicial investigation, military command, and archaeological research. Therefore, it has a great value in research of shredded document recovery. In consideration of large differences between languages and great demands for Chinese document recovery, our study will focus on the shredded Chinese document. In this paper, a method of shredded document recovery based on character stroke feature is proposed. We use horizontal strokes to match Chinese characters. Finally the shredded document is restored. In the test of actual sample, the method proposed in this paper has achieved good recovery result. The average accuracy is 13.96% higher than the traditional algorithm.

Aiming to co-channel interference (CCI) for LTE downlink multi-user MIMO-OFDM system, maximizing the successive signal to leakage plus noise ratio (SSLNR) interference cancellation algorithm based on Pre-processing is proposed. The algorithm utilizes SSLNR based on precoding matrix scheme to process emission signal and the known leakages is canceled by dirty paper coding (DPC) algorithm at the transmitter. At the receiver, the received signal are treated by preconditioned matrix, the interference between different users are eliminated in further, the sum-capacity is improved by pre-processing Matrix. Meanwhile, the algorithm is not limited by the number of transmit and receive antennas. The performance improvement is verified by simulation, when BER is 10-4, signal noise ratio (SNR) is improved about 4dB.

The Workshop for the Executable Paper Grand Challenge, taking place at the 2011 International Conference on Computational Science, is a platform for Grand Challenge contestants and finalists to present their concept of an Executable Paper, a method by which data intensive research is better represented in a scholarly journal article. The Executable Paper Grand Challenge is designed to enhance how scientific information is used and communicated in computer- and computational sciences.

Novel organic forms of interactive displays are developed recently from flexible materials that can bend, fold or roll between the hands of its user giving him a wholly new sense of digital interactive media. In this paper, we hold a survey for different OUIs (Organic User Interfaces) and categorize them into four main categories: flat surfaces, non-flat surfaces, digital substrates and handheld devices. Each of which has its uses that suites certain contexts and does not fit others. We discuss each category thoroughly with its possible sub-categories, examples and applications. Each category is noticed to have a physical design that has a great deal of resemblance to the physical form or design of a pharaonic monumental style or type of artifacts from the history of ancient Egypt. The paper highlights the observed resemblance between organic digital displays and ancient monumental displays with respect to the similarities and differences in the sense that they are both used as information displays for targeted users in certain contexts. This unintended physical resemblance points out to where we might inspire novel designs for digital content on interactive displays.