Search

Increasing agricultural efficiency in a sustainable manner will contribute to feed a growing population under limited land, nutrient and water resources. Water scarcity and the increasing social concern for this resource are already requiring more sophisticated irrigation and decision-support systems. To address the heterogeneity in crop water status in a commercial field, precision irrigation requires accurate information about crops (e.g., crop water status), soil (e.g., moisture content) and weather (e.g., wind speed and vapor pressure deficit). Numerous studies have shown that plant canopy temperature can be used to derive reliable plant water stress indicators, thus making it a promising tool for irrigation water management. However, efficient and cost-effective measurement techniques are still lacking. This paper assesses the potential of infrared thermometry and thermal imaging for monitoring plant water stress in a commercial sugar beet field by comparing canopy temperature data acquired from a conventional thermal camera with an inexpensive infrared sensor, both mounted on a rotary-wing unmanned aerial vehicle (UAV). Measurements were taken at various phenological stages of the sugar beet growing season. Laboratory tests were performed to determine the key features for accurate temperature measurements and flight altitude. Experiments were conducted in 2014 and 2015 in experimental and commercial sugar beet fields in Southwestern Spain to (i) develop an affordable infrared temperature system suitable for mounting on a UAV to obtain thermal information, (ii) compare sugar beet canopy temperature measurements collected with the low-cost platform with those obtained from a conventional thermal camera, both mounted on a rotary-wing UAV, (iii) identify the factors that will limit the use of the low-cost system to derive temperature-based water stress indices. To accomplish these objectives, well-watered and deficit irrigated plots were established. Results indicated that the lightweight canopy temperature system was robust and reliable, although there were some constraints related to weather conditions and delimitation of the area covered by the infrared sensor. [ABSTRACT FROM AUTHOR] more...

Accuracy levels achieved with differential global positioning system (DGPS) receivers in agricultural operations depend upon the quality of the correction signal. This study has assessed differential signal error from a Dedicated Base Station, OmniSTAR VBS, European Geostationary Navigation Overlay System, European reference frame-IP for internet protocol (EUREF-IP) and radio navigation satellite aided technique (RASANT). These signals were utilized in guidance assisting systems for agricultural applications, such as tillage, harvesting, planting and spraying, in which GPS receivers were used under dynamic conditions. Simulations of agricultural operations on different days and at different time slots and simultaneously recording the tractor′s geo-position from a DGPS receiver and the tractor′s geo-position from a real-time kinematic (RTK) GPS allowed the comparison of the GPS correction signals. The hardware used for tractor guidance was a lightbar (Trimble model EZ-Guide Plus) system. ANOVA statistics showed a significant difference between the accuracy of the correction signals from different sources. GPS correction signal recommendations to farmers depend upon the accuracy required for the specific operation: (a) Yield monitoring and soil sampling (<1 m) are possible with all the GPS correction signals accessed in any time slot. (b) Broadcast seeding, fertilizer and herbicide application (<0.5 m) are possible for 80% of time with OmniSTAR VBS, 40% of time with RASANT and EUREF-IP and 100% of time with a dedicated base station. (c) Transplanting and drill seeding (<0.04 m) are not possible with the accuracy correction provided by any one of the systems used in this study. [ABSTRACT FROM AUTHOR] more...

Typically, agrochemicals are applied to olive trees uniformly within a whole orchard without regard to the spatial variability of the target tree profile. The treatment efficiency can be improved by reducing the spray losses associated with deposition on the ground and off-target drift. The goals of this study were to develop a technique to evaluate the chemical losses resulting from a spray treatment applied to Spanish olive trees and to design an automated control system to adjust the application volume based on tree structure information incorporated in a prescription map and GPS technology. The automatic control system selectively actuated individual sections of the spray boom in real-time based upon the prescribed demand in the GPS map and the current geo-position information provided by the tractor's RTK GPS system. Test results indicated that the control system, mounted on a conventional sprayer, was able to reduce the volume of spray application on the six tree rows tested by 19% when compared to conventional spray application techniques. Results also indicated that the average application loss to the soil, for all the trees, was reduced 15.25% compared to treatment with conventional equipment. Two spray collection masts of 9.5 m height were designed and built to measure the drift produced during spray application and therefore to provide data for analysis of spray distribution at various application heights within the tree. Results show that the new control system was able to achieve the same spray distribution on the tree as the conventional sprayer while reducing the volume of chemical applied. [ABSTRACT FROM AUTHOR] more...