Search

The dielectric spectra and conductivity properties of neat poly(epichlorohydrin-co-ethylene oxide)(PECH-co-EO) copolymer and two modified copolymers with a 20% or 40% of dendron 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy] benzoate units were analysed. A process of thermal orientation was applied to the copolymers to fine-tune the molecular motion of the side chains and determine their validity for cation transport materials. The study was conducted using Dielectric Thermal Analysis (DETA). The spectra of the modified unoriented and oriented copolymers consisted of five dielectric relaxations (δ, γ, β, αTg, and αmelting). The analysis of the relaxations processes shows that as the grafting with the dendron units increases, both the lateral and main chains have a greater difficulty moving. The thermal orientation induces in the main chain partial crystallization, including the polyether segments, and modifies the cooperative motion of the main chain associated with the glass transition (αTg). A deep analysis of the electrical loss modulus revealed that the degree of modification only modifies the temperature peak of each relaxation, and this effect is more perceived if the dendron unit content is higher (40%). The thermal orientation process seems equal to the spectra of CP20-O and CP40-O to the point that the degree of modification does not matter. Nevertheless, the fragility index denotes the differences in the molecular motion between both copolymers (40% and 20%) due to the thermal orientation. The study of the electric conductivity showed that the ideal long-range pathways were being altered by neither the thermal orientation process nor the addition of dendrimers. The analysis of the through-plane proton conductivity confirmed that the oriented copolymer with the highest concentration of dendrimers was the best performer and the most suitable copolymer for proton transport materials. [ABSTRACT FROM AUTHOR]

In this paper, we report on the preparation and characterization of membranes out of two side-chain liquid crystalline copolymers, dendronized at two different extents (20 and 40%, CP20 and CP40, respectively). The membranes were characterized by atomic force microscopy (AFM), field-emission scanning electron microscopy (FESEM), contact angle (CA) analysis, and water uptake. Moreover, transport properties were studied by methanol and proton conductivity experiment and by linear sweep voltammetry (LSV). For the sake of comparison, the behavior of the grafted copolymers was compared with the unmodified copolyether CP0 and with Nafion 117. Results demonstrated that in CP20 and CP40, cation transport depends on the presence of defined cationic channels, not affected by water presence; the comparison between LSV experiments performed with different alkaline cations suggests that CP40 possesses channels with larger diameters and better-defined inner structures. [ABSTRACT FROM AUTHOR]

Dendronized polyethers give rise to columnar LC structures which can successfully act as cation transport materials. Therefore, we prepared two different materials, based on Poly(epichlorohydrin-co-ethylene oxide) (PECH-co-EO) grafted with methyl 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy] benzoate, containing 20% or 40% modified units, respectively. The obtained polymers were characterized by differential scanning calorimetry (DSC), X-ray diffraction and optical microscopy between crossed polars (POM) and compared to the unmodified PECH-co-EO. In order to reach efficient transport properties, homeotropically oriented membranes were prepared by a fine-tuned thermal annealing treatment and were subsequently investigated by dynamic mechanical thermal analysis (DMTA) and dielectric thermal analysis (DETA). We found that the presence of the dendrons induces a main chain partial crystallization of the polyether chain and coherently increases the polymer Tg. This effect is more evident in the oriented membranes. As for copolymer orientation upon annealing, the cooling rate and the annealing temperature were the most crucial factors. DMTA and DETA confirmed that grafting with the dendron strongly hinders copolymer motions, but did not show great differences between unoriented and oriented membranes, regardless of the amount of dendrons. [ABSTRACT FROM AUTHOR]

We investigated the possibility of improving the performance of polysulfone (PSf) membranes to be used in carbon dioxide capture devices by blending PSf with a commercial polyethylene imine, Lupasol G20, previously modified with benzoyl chloride (mG20). Additive amount ranged between 2 and 20 wt %. Membranes based on these blends were prepared by phase inversion precipitation and exhibited different morphologies with respect to neat PSf. Surface roughness, water contact angles, and water uptake increased with mG20 content. Mass transfer coefficient was also increased for both N2 and CO2; however, this effect was more evident for carbon dioxide. Carbon dioxide absorption performance of composite membranes was evaluated for potassium hydroxide solution in a flat sheet membrane contactor (FSMC) in cross flow module at different liquid flow rates. We found that, at the lowest flow rate, membranes exhibit a very similar behaviour to neat PSf; nevertheless, significant differences can be found at higher flow rates. In particular, the membranes with 2 and 5 wt % additive behave more efficiently than neat PSf. In contrast, 10 and 20 wt % additive content has an adverse effect on CO2 capture when compared with neat PSf. In the former case, a combination of additive chemical affinity to CO2 and membrane porosity can be claimed; in the latter case, the remarkably higher wettability and water uptake could determine membrane clogging and consequent loss of efficiency in the capture device. [ABSTRACT FROM AUTHOR]