Search

In order to solve the problem of low transverse tensile strength of triaxial geogrid, a kind of performance-optimized multi-axial geogrid (POMG) that can bear larger transverse loads was designed. Firstly, the forming equipment and process of POMG are designed. Secondly, through the test of formability and mechanical properties, the POMG with good formability and mechanical properties is obtained, and the average tensile strength of POMG with circular and semicircular holes is the highest, reaching more than 16 KN/m. Finally, the feasibility of the process is further verified by numerical simulation, and the shape distribution and stress-strain law of POMG during the forming process are obtained, which provides further guidance for the actual production. [ABSTRACT FROM AUTHOR]

In this paper, the tensile behavior of industrial polypropylene triaxial geogrid with different pre-punched hole diameters was studied by experiment and numerical analysis. The industrial polypropylene sheets with different diameters of circular holes were stretched at elevated temperature and then the tensile properties of triaxial geogrids at room temperature were evaluated. It was found that the pre-punched hole diameter of triaxial geogrid had a very close relationship with the mechanical properties. With the increase of the pre-punched hole diameter, the tensile strength of triaxial geogrid shows a trend of first increasing and then decreasing. Combined with numerical simulation, the optimal pre-punched hole diameter can be accurately obtained, and the distribution law of the width, thickness, stress, and strain of triaxial geogrid can be obtained. Under the condition of a stretching ratio of 3 and node spacing of 3 mm, it was found that the mechanical properties of industrial polypropylene triaxial geogrid was the best when the pre-punched hole diameter was 2.6 mm. [ABSTRACT FROM AUTHOR]