Search

In this study, composites of poly (hydroxybutyrate-co-valerate) (PHBV) with untreated luffa fibers (ULF) and NaOH-H2O2 treated luffa fibers (TLF) were prepared by hot press forming. The properties of luffa fibers (LFs) and composites were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and other analysis methods. Results showed that pre-treatment effectively removed pectin, hemicellulose, and lignin, thus reducing the moisture absorptivity of LFs. The flexural strength of TLF/PHBV was higher than that of ULF/PHBV. With 60% LF content, the flexural strengths of ULF/PHBV and TLF/PHBV reached 75.23 MPa and 90.73 MPa, respectively, 219.7% and 285.6% more than that of pure PHBV. Water absorptivities of composites increased with increase in LF content. Water absorptivity of TLF/PHBV was lower than that of ULF/PHBV. The flexural strengths of composites decreased after immersion in water at room temperature. Meanwhile, flexural strength of TLF/PHBV was lower than that of ULF/PHBV. Pretreatment of LFs effectively improved the bonding between fibers and PHBV, resulting in enhanced and thus improved the moisture resistance of composites. [ABSTRACT FROM AUTHOR]

The crack initiation point can be regarded as a sign of composite failure and plays a vital role in the evaluation of fracture toughness. Wood-plastic composites (WPCs) are viscoelastic materials and the evaluation of fracture mechanism and toughness has a great significance in their applications. Therefore, we used the acoustic emission (AE) technique to measure the crack initiation point of the WPCs and evaluate their fracture toughness. The results show that the novel AE-based methods were more effective than the conventional standard methods for characterization of the crack initiation point. Using the relationship of cumulative AE events with time and load, the critical failure load was quickly determined, and then the critical stress intensity factor and fracture toughness were calculated. The fracture toughness of the WPCs increased with an increase in the wood fiber content. [ABSTRACT FROM AUTHOR]

The damage and fracture of fiber reinforced polymer composites are vital constraints in their applications. To understand the mechanism of damage of wood fiber (WF) reinforced high density polyethylene (HDPE) composites, we used waste WF and recycled HDPE (Re-HDPE) as the raw materials and prepared high-filled WF/Re-HDPE composites via extrusion. The damage and fracture mode and failure mechanism of the composites with different WF contents (50%, 60%, and 70%) was studied under a three-point bending test by combining the acoustic emission (AE) technique and scanning electron microscope (SEM) analysis. The results show that AE technology can better assist in understanding the progress of damage and fracture process of WF/Re-HDPE composites, and determine the damage degree, damage accumulation, and damage mode. The damage and fracture process of the composites presents three main stages: the appearance of initial damage, damage accumulation, and destructive damage to fracture. The matrix deformation, fiber breakage, interface delamination, fiber-matrix debonding, fiber pull-out, and matrix cracking were the dominant modes for the damage of high-filled WF/Re-HDPE composites under bending load, and the AE signal changed in different damage stages and damage modes. In addition, the WF content and repeated loading had a significant influence on the composite's damage and fracture. The 50% and 60% WF/Re-HDPE composites produced irreversible damage when repeated load exceeded 75% of the maximum load, while 25% of the maximum load could cause irreversible damage for 70% WF/Re-HDPE composites. The damage was accumulated owing to repeated loading and the mechanical properties of the composites were seriously affected. [ABSTRACT FROM AUTHOR]

Poly(3-hydroxybutyrate–co–3-hydroxyvalerate) (PHBV) is a biodegradable polymer and has several potential applications. Herein, we have used a rich biomass resource, rice husk, to obtain rice husk nano-SiO2 (RHNS) and prepared RHNS/PHBV composites by using hot-press molding. The results showed that the amorphous nature of spherical nano-SiO2 particles with an average diameter of 40–80 nm was obtained. The tensile strength and flexural strength of the RHNS/PHBV-3 composite reached up to 23.515 and 75.669 MPa, respectively, corresponding to an increase of 33.65% and 15.54% as compared to pure PHBV. The enhanced mechanical properties of the RHNS/PHBV composite can be attributed to the uniform dispersion and strong interfacial bonding of RHNS with the PHBV matrix. In addition, the water absorption rate of the RHNS/PHBV composite increased from 0.26% to 0.35% and the water swelling ratio followed the given order in different directions: thickness > width > length. Furthermore, the initial degradation temperature and residual rate of combustion at 700 °C of the composites increased with higher content of RHNS, which represents the enhanced thermal stability of RHNS/PHBV composites. In summary, RHNS served as an excellent reinforcement and RHNS/PHBV composites have shown promising properties for various potential applications. [ABSTRACT FROM AUTHOR]