Search

Bark extracts are sustainable sources of biopolymers and have great potential to replace fossil-based polymers in wood coating applications. The present study investigated the applicability of suberin fatty acids hydrolysate (SFA) extracted from the outer bark of silver birch (Betula pendula Roth.) for coating of aspen wood (Populus tremula L.). The SFA combined with maleic anhydride (MA) and octadecyltrichlorosilane (OTS) as a curing agent was prepared in ethanol and used in surface coating. The water contact angle, surface reflectance spectra, FTIR, and SEM-EDS were used to characterize the physical and chemical properties of the coated wood samples. Further, the long-term stability of the SFA coating was analyzed via artificial aging. The wood surface became hydrophobic, as the contact angle for the water droplet (WCA) was over ~120°, and was stable for all of the prepared combinations of SFA, MA, and OTS. [ABSTRACT FROM AUTHOR]

The potential of using ground birch (Betula verrucosa Ehrh.) bark as an eco-friendly additive in urea-formaldehyde (UF) adhesives for plywood manufacturing was investigated in this work. Five-ply plywood panels were fabricated in the laboratory from beech (Fagus sylvatica L.) veneers bonded with UF adhesive formulations comprising three addition levels of birch bark (BB) as a filler (10%, 15%, and 20%). Two UF resin formulations filled with 10% and 20% wheat flour (WF) were used as reference samples. The mechanical properties (bending strength, modulus of elasticity and shear strength) of the laboratory-fabricated plywood panels, bonded with the addition of BB in the adhesive mixture, were evaluated and compared with the European standard requirements (EN 310 and EN 314-2). The mechanical strength of the plywood with the addition of BB in the adhesive mixture is acceptable and met the European standard requirements. Markedly, the positive effect of BB in the UF adhesive mixture on the reduction of formaldehyde emission from plywood panels was also confirmed. Initially, the most significant decrease in formaldehyde release (up to 14%) was measured for the plywood sample, produced with 15% BB. After four weeks, the decrease in formaldehyde was estimated up to 51% for the sample manufactured with 20% BB. The performed differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), and derivative thermogravimetry (DTG), also confirmed the findings of the study. As this research demonstrated, BB as a waste or by-product of wood processing industry, can be efficiently utilized as an environmentally friendly, inexpensive alternative to WF as a filler in UF adhesive formulations for plywood manufacturing. [ABSTRACT FROM AUTHOR]