Search

A very important issue that needs to be solved as simply and correctly as possible is how to establish the thermal performance of phase-changing materials (PCM). The undertaken researches have analyzed the values of the thermal performances of the PCM taking into account the method of finite elements and the experimental research, respectively, based on a modern measurement system that was designed and implemented. Butyl stearate which has been encapsulated through complex coacervation in polymethyl methacrylate has been used as a PCM. Samples were made containing 10%, 20%, 30% and 40% PCM, respectively, within their structure. The research has established that at both the hot plate and the cold plate interface, the evolution of the temperature over time, established by both the finite element method (FEM) and experimental research, are quite close, and the best results have been obtained for the P30 sample. A very important thing observed during the finite element method (FEM) is that the simulated thermal flow variation extends between 2700-3110W/m2 being small enough not to influence the temperature measurement at the interface of hot or cold plates. Thus, the use of the FEM or the experimental research method can be applied with good results, provided that the correct initial conditions are used in the finite element method and that the experimental research is performed using the best possible apparatus.

Tactile properties are one of the most important attributes of porous polymeric materials such as textiles, comprising a subjective evaluation index for textile materials and functional clothing, primarily affecting the sensation of comfort during the wearing of a garment. A new test method was proposed, and a mechanical measurement system was developed to objectively characterize the tactile properties of porous polymeric materials by simulating the dynamic contact processes during human skin contact with the materials and in consideration of different aspects of tactile sensations. The measurement system can measure the bending, compression, friction, and thermal transfer properties in one apparatus, and is capable of associating the objective measurements with the subjective tactile sensations. The test and evaluation method, the components of the mechanical measurement system, the definition and grading method of the evaluation indices, and the neural network prediction model from objective test results to subjective sensations of tactile properties were presented. The experiments were conducted for the objective tests and correlation tests. Seven types of porous polymeric sheet materials from seven categories for the tactile properties were cut to a size of 200 mm × 200 mm and tested. Each index of tactile properties was significantly different (P < 0.05) between different sheet materials. The correlations of bending, compression, friction, and thermal transfer properties with Kawabata KES test methods were analyzed. An intra-laboratory test was conducted and an analysis of the variance was performed to determine the critical differences of within laboratory precisions of the measurement system. This mechanical measurement system provides a method and system for objective measurement and evaluation of tactile properties of porous polymeric sheet materials in industrial application.

This study aims to enhance the low-frequency induction heating (LFIH) effect in a thermoplastic polymer doped with iron oxide magnetic particles, which are promising candidates for several medical applications thanks to their confirmed biocompatibility. Two main approaches were proposed to successfully boost the heating ability; i.e., improving the magnetic concentration of the composite with higher filler content of 30 wt %, and doubling the frequency excitation after optimization of the inductor design. To test the magnetic properties of the ferromagnetic composite, a measurement of permeability as a function of temperature, frequency, and particle content was carried out. Thermal transfer based COMSOL simulations together with experimental tests have been performed, demonstrating feasibility of the proposed approach to significantly enhance the target temperature in a magnetic composite. These results are encouraging and confirmed that IH can be exploited in medical applications, especially for the treatment of varicose veins where local heating remains a true challenge.