Search

The improper disposal of plastics is a growing concern due to increasing global environmental problems such as the rise of CO 2 emissions, diminishing petroleum sources, and pollution, which necessitates the research and development of biodegradable materials as an alternative to conventional packaging materials. The purpose of this research was to analyse the properties of biodegradable polymer blends of thermoplastic potato starch (TPS) and polylactide, (PLA) without and with the addition of citric acid (CA) as a potential compatibilizer and plasticizer. The prepared blends were subjected to a comprehensive physicochemical characterization, which included: FTIR-ATR spectroscopy, morphological analysis by scanning electron microscopy (SEM), determination of thermal and mechanical properties by differential scanning calorimetry (DSC), water vapour permeability ( WVP ), as well as biodegradation testing in soil. The obtained results indicate an improvement in adhesion between the TPS and PLA phases due to the addition of citric acid, better homogeneity of the structure, and greater compatibility of the polymer blends, leading to better thermal, mechanical and barrier properties of the studied biodegradable TPS/PLA polymer blends. After conducting the comprehensive research outlined in this paper, it has been determined that the addition of 5 wt.% of citric acid serves as an effective compatibilizer and plasticizer. This supplementation achieves an optimal equilibrium across thermal, mechanical, morphological, and barrier properties, while also promoting material sustainability through biodegradation. In conclusion, it can be stated that the use of thermoplastic starch in TPS/PLA blends accelerates the biodegradation of PLA as a slowly biodegradable polymer. While the addition of citric acid offers significant advantages for TPS/PLA blends, further research is needed to optimize the formulation and processing parameters to achieve the desired balance between mechanical strength, thermal and barrier properties and biodegradability.

Starch sweeteners are commonly used in many confectionery food products. Usually, considering the trend of producing low-energy and low-fat products, these products include fat mimetics. The aim of this study was to investigate the influence of fructose sweeteners on the development of functional properties of MCG fat mimetic, such as rheological and textural behavior. Fat mimetics made from Microcrystalline cellulose gel (MCG) consist of colloidal microcrystalline cellulose (MCC) and sodium carboxymethyl cellulose (NaCMC) and were observed in five different concentrations (1, 3, 5, 7, and 10%). The amount of starch sweetener in the mixture with the fat mimetics was 20%. The effect of pure crystalline fructose and a mixture of crystalline-fructose and high-fructose corn syrup in a ratio of 1:1 was analyzed. Rheological parameters significantly decreased with the application of starch sweeteners. By adding a mixture of starch sweeteners, this decrease was further increased by 10%. At higher gel concentrations of 5, 7, and 10%, the dominance of the elastic modulus G' was preserved. Texture parameters such as firmness, consistency, cohesiveness, and viscosity index were reduced accordingly. The presence of starch sweeteners significantly disrupted the networking of the three-dimensional structure of the MCG gel and the proper hydration process during the formation of fat mimetics.