Search

This study investigates the feasibility of using biodegradable secondary alcohol ethoxylate (SAE) non-ionic surfactant as a building block for the formation of reverse micelles, functioning as reactive dye carriers for the dyeing of cotton fabric in non-aqueous octane medium. Ten dyeing parameters were optimised, by a one-factor-at-a-time approach, namely: (i) effect of colour fixation agent; (ii) surfactant-to-water mole ratio; (iii) surfactant-to-co-surfactant mole ratio; (iv) volume of soda ash; (v) volume of dye; (vi) solvent-to-cotton ratio; (vii) dyeing temperature; (viii) dyeing time; (ix) fixation time; (x) soda-ash-to-cotton ratio. The colour properties, fastness properties and physical properties of SAE-dyed samples were experimentally compared with the conventional water-dyed samples. The optimised condition was found when SAE samples were dyed as follows: (a) 1:20 surfactant-to-water ratio; (b) 1:8 surfactant-to-co-surfactant ratio; (c) 10:1 solvent ratio; (d) 40 min dyeing time; (e) 60 min fixation time; and (f) 70 °C dyeing and fixation temperature. The results showed that SAE-dyed samples have better colour strength, lower reflectance percentage and comparable levelness, fastness and physical properties than that of water-dyed samples. SEM images revealed that the dyed cotton fibres had no severe surface damage caused by an SAE-based reverse micellar dyeing system. The TEM image depicts that the reverse micelle was of nanoscale, spherical-shaped and had a core–shell structure, validating the presence of reverse micelle as a reactive dye carrier and the potential of an SAE-based reverse micellar system for dyeing of cotton fabrics.

Polybutene-1 with form I crystals exhibits excellent creep resistance and environmental stress crack resistance. The filaments of polybutene-1 and its random copolymer with 4 mol% ethylene co-units were produced via extrusion melt spinning, which are expected to be in form I states and show outstanding mechanical properties. The variances in microstructure, crystallization–melting behavior, and mechanical properties between homopolymer and copolymer filaments were analyzed using SEM, SAXS/WAXD, DSC, and tensile tests. The crystallization of form II and subsequent phase transition into form I finished after the melt-spinning process in the copolymer sample while small amounts of form II crystals remained in homopolymer filaments. Surprisingly, copolymer filaments exhibited higher tensile strength and Young’s modulus than homopolymer filaments, while the homopolymer films showed better mechanical properties than copolymer films. The high degree of orientation and long fibrous crystals play a critical role in the superior properties of copolymer filaments. The results indicate that the existence of ethylene increases the chain flexibility and benefits the formation of intercrystalline links during spinning, which contributes to an enhancement of mechanical properties. The structure–property correlation of melt-spun PB-1 filaments provides a reference for the development of polymer fibers with excellent creep resistance.

With the rapid development of high-frequency communication and large-scale integrated circuits, insulating dielectric materials require a low dielectric constant and dielectric loss. Poly (aryl ether ketone) resins (PAEK) have garnered considerable attention as an intriguing class of engineering thermoplastics possessing excellent chemical and thermal properties. However, the high permittivity of PAEK becomes an obstacle to its application in the field of high-frequency communication and large-scale integrated circuits. Therefore, reducing the dielectric constant and dielectric loss of PAEK while maintaining its excellent performance is critical to expanding the PAEK applications mentioned above. This study synthesized a series of poly (aryl ether ketone) resins that are low dielectric, highly thermally resistant, and soluble, containing cyclohexyl and diphenyl fluorene. The effects of cyclohexyl contents on the properties of a PAEK resin were studied systematically. The results showed that weakly-polarized cyclohexyl could reduce the molecular polarization of PAEK, resulting in low permittivity and high transmittance. The permittivity of PAEK is 2.95–3.26@10GHz, and the transmittance is 65–85%. In addition, the resin has excellent solubility and can be dissolved in NMP, DMF, DMAc, and other solvents at room temperature. Furthermore, cyclohexyl provided PAEK with excellent thermal properties, including a glass transition temperature of 239–245 °C and a 5% thermogravimetric temperature, under a nitrogen atmosphere of 469–534 °C. This makes it a promising candidate for use in high-frequency communications and large-scale integrated circuits.

The quality of polyacrylonitrile (PAN) precursor has a great influence on the properties of the resultant carbon fibers. In this paper, a novel comonomer containing the sulfonic group, 2-acrtlamido-2-methylpropane acid (AMPS), was introduced to prepare P(AN-co-AMPS) copolymers using itaconic acid (IA) as the control. The nanofibers of PAN, P(AN-co-IA), and P(AN-co-AMPS) were prepared using the electrospinning method. The effect of AMPS comonomer on the carbon nanofibers was studied using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Raman spectrum. The structural evolutions of PAN-based nanofibers were quantitatively tracked by FTIR and XRD during the thermal oxidative stabilization (TOS) process. The results suggested that P(AN-co-AMPS) nanofibers had the lower heat release rate (ΔH/ΔT = 26.9 J g−1 °C−1), the less activation energy of cyclization (Ea1 = 26.6 kcal/mol and Ea2 = 27.5 kcal/mol), and the higher extent of stabilization (Es and SI) during TOS process, which demonstrated that the AMPS comonomer improved the efficiency of the TOS process. The P(AN-co-AMPS) nanofibers had the better thermal stable structures. Moreover, the carbon nanofibers derived from P(AN-co-AMPS) precursor nanofibers had the better graphite-like structures (XG = 46.889). Therefore, the AMPS is a promising candidate comonomer to produce high performance carbon fibers.