Search

Totally chlorine free (TCF) and elemental chlorine free (ECF) single and multistage sequences were used to bleach whole stem kenaf pulp. The results indicated that in contrast to unbleached kraft wood pulps, kraft kenaf pulps can be easily bleached to a brightness of 91.4% using a four-stage TCF [Q1(PO)Q2P] bleaching sequence. The ECF bleaching pulps had slightly higher selectivity and yield than those of the TCF bleached pulps. The strength properties of the TCF [Q1(PO)Q2P] and ECF (D1ED2EP) bleached pulps were comparable, with the exception of tear index and tensile index, which were slightly higher and lower for TCF pulps, respectively.

The present study was focused on the effect of chitosan, a linear amino-polysaccharide, on the properties of handsheets made from bleached kenaf kraft pulp. Chitosan was incorporated into the sheets by three distinct techniques, equilibrium adsorption (pH 5), precipitation (pH 10), and spray application. The chitosan dosages tested were 0.5%, 1%, 1.5%, and 2% based on oven dry pulp. Chitosan was found to increase the dry-strength properties of paper such as tear, burst, and tensile index, but its effectiveness was strongly dependent on the method of addition. Spray application gives superior strength properties, followed by equilibrium adsorption. Chitosan is less effective under alkaline conditions. The results showed that chitosan addition improved the mechanical properties of sheets, but the rate of increase in strength properties was higher from 0% to 0.5% compared to 1% to 1.5% regardless of the treatment techniques.

In this study, an attempt is made to understand the chemical and morphological characteristics of Malaysian cultivated kenaf fractions (bast, core, and whole stem). Results based on morphologyand chemical analysis indicate that bast and core fiber fractions in the kenaf are significantly different, although the chemical composition of kenaf is quite similar to the woody mass. In the case of whole stem fibers, it is concluded that the effective length of fibers from the whole stem is reasonably good for the purpose of making printing papers.