Search

Disposable containers made of non-biodegradable polymers are considered as one of the most prevalent environmental pollutants. It is very important and desirable to make fully biodegradable disposable containers for food packaging that does not endanger the health of consumers. In this research, fully biodegradable polymer composites were prepared by melt mixing of polylactic acid (PLA), polybutylene succinate (PBS), and natural polymers including corn starch and wheat straw, and their physical and mechanical properties were evaluated. For this purpose, by conducting experiments according to the optimal custom mixture design of the response surface methodology, the effect of 3 independent variables including the concentration of the PLA and PBS biopolymers blend (50/50% w/w) (CBB) in the range of 30–70, the concentration of corn starch (CCS) in the range of 30–60 and the concentration of wheat straw (CWS) in the range of 0–8 wt percentage of biocomposite on the dependent variables including the elastic modulus (EM), elongation at break (EB), impact strength (IS) and equilibrium moisture content (EMC) of the biocomposite sheet were investigated. According to the results of this research, with the increase in the concentration of corn starch and wheat straw in the studied range, the EM and EMC of the biocomposite increased, while its EB and IS decreased. According to the results obtained from optimizing the effects of independent variables on the physicomechanical properties of the biocomposite sheet, the optimal values predicted by the models for CBB, CCS and CWS were 48.2 wt%, 45.4 wt%, and 6.4 wt%, respectively and predicted values for EM, EB, IS and EMC were 80.8 MPa, 11.4%, 2 kJ/m2 and 4.1%, respectively. Also, the biodegradability rate of the biocomposite with the optimal formulation was 71.1% in the fifth month of the test. • Biocomposites of biopolyester blend filled with two natural polymers were prepared. • Biocomposites contained polylactic acid, polybutylene succinate, starch, and wheat straw. • Constituents concentration had main effects on the sheet's physicomechanical properties. • Optimal sheet contains 48.2 wt% biopolyester blend and 51.8 wt% natural polymers. • The biocomposite sheet with optimal formulation had a high degree of biodegradability. [ABSTRACT FROM AUTHOR]

Commingled plant and polypropylene fibres (PP) nonwovens are attractive for automotive industry because of their interesting mechanical performances combined with good acoustical properties. This double function is achieved thanks of controlled porosity within the composite material. Indeed, from a same material, different functions (acoustic or mechanical) can be obtained by only varying the compaction rate during moulding. This study aims to highlight the necessity of a very large porosity volume fraction (60%) to reach good acoustic properties and understand the mechanical effect behind it. By combining tensile testing, acoustic absorption measurement and scanning electron imaging analysis, the microstructure, acoustic and mechanical properties have been investigated and were found to be intimately related to the material porosity content. As expected, when increasing porosity level from 5 to 60%, the material behaviour change and its tensile properties (modulus, strength and elasticity domain) drop drastically to a point where the material is no longer elastic (70% porosity) due to a modification of the material microstructure involving different failure mechanisms. [ABSTRACT FROM AUTHOR]

Abstract: An Environmental Stress Cracking test was used to investigate damage to glass fiber reinforced poly(lactic acid) based biocomposites. The study was performed in water. The main advantages were a significant decrease in experiment duration compared to natural, artificial or accelerated tests and an increase in the reliability of the results. Depending on the specific nature of the glass fiber used, significant types of failure behavior were observed. [Copyright &y& Elsevier]