Search

The action of protons and electrons on the properties of glass strands under vacuum conditions has been experimentally investigated. The experimental procedure is described. The effects of irradiation, strain rate, and reduced temperature and pressure on the properties of glass reinforcement and glass-reinforced plastics are estimated.

The stability of cylindrical shells in axial compression has been experimentally investigated. The glass-reinforced plastic shells were fabricated in various ways: by winding glass strand, from glass cloth, and by a combination of the first two methods. The buckling mode and critical load were determined as functions of the ratio of shell radius to shell thickness. A statistical analysis of the test data leads to a formula with an empirical coefficient for use in practical stability calculations.

The design and fabrication of lens-shaped tanks are described. The results of an investigation of the deformation and strength of the tanks are presented together with the data of cyclic tests.

The collapse and recovery loads have been experimentally determined for glass-reinforced-plastic shells compressed along the axis. Compressive force-displacement diagrams have been recorded, and it is shown that the experimental and theoretical diagrams qualitatively coincide. The collapse and recovery times have been ascertained. It is shown that glass-reinforced plastics can be used as an elastic material for investigating shell stability at large deformations.

It is shown that removing paraffin size from the glass strands by means of ultrasound has little effect on their strength, improves the structure of the material, and raises the mechanical strength of the GRP by 11–12%. An ultrasonic strand cleaner employing focusing piezoelectric ceramic transducers is described.

The effect of certain aggressive media on the wear of glass-reinforced plastics has been investigated. It is shown that as the angle of inclination of the glass reinforcing fibers relative to the friction surface increases, the wear of the material is sharply reduced.

Experimental data are used as the basis for a discussion of some of the technical factors affecting the strength of filament-wound glass-reinforced plastics (GRP): winding speed, tension on the glass, life of resin. A relationship between the strength of GRP and these factors is demonstrated. The effect of the thickness and diameter of the test piece on the tensile strength of GRP material is examined.

The authors investigate the influence of certain aggressive media (toxic chemicals) on the wear resistance of filled epoxypolyamide composites. The presence of toxic chemicals in the zone of friction causes a sharp fall in the wear of the polymers. The maximum wear resistance is displayed by epoxypolyamide composites filled with iron powder, cement, or graphite.