Search

The in-plane seismic behavior of unreinforced masonry (URM) structures is closely related to the aspect ratio of the wall and vertical load. The purpose of this study was to investigate the difference between the failure mode of the model and the horizontal load using the finite element model (FEM) under the action of aspect ratio (0.50 to 2.00) and vertical load (0.2 MPa to 0.70 MPa). The overall macro model was established using the Abaqus software, and the corresponding simulation was performed. The simulation results indicate that: i) the shear failure and flexural failure were the main failure modes of masonry walls; ii) shear failure could be viewed as the main failure mode of the model when the aspect ratio was less than 1.00; however, the flexural failure was considered to be the main failure mode of the model once the aspect ratio was greater than 1.00; iii) when a vertical load of 0.20 MPa was applied to the model, only flexural failure was observed, regardless of whether the aspect ratio of the model increased or decreased; the flexural shear mixed failure was captured within the range of 0.30 MPa– 0.50 MPa; the shear failure was the main failure mode within the range of 0.60 MPa– 0.70 MPa; and iv) the wall with an aspect ratio less than 1.00 could bear a higher horizontal load, and the increase in vertical load can significantly improve the horizontal load of the wall. In contrast, once the aspect ratio of the wall reaches or exceeds 1.00, the increase in the vertical load has little effect on the increase in the horizontal load of the wall.

Plant clonality, the ability of a plant species to reproduce itself vegetatively through ramets (shoot-root units), occurs in many plant species and is considered to be more frequent in cold or wet environments. However, a deeper understanding on the clonality-climate relationships along large geographic gradients is still scarce. In this study we revealed the clonality-climate relationships along latitudinal gradient of entire China spanning from tropics to temperate zones using clonality data for 4015 vascular plant species in 545 terrestrial communities. Structural equation modeling (SEM) showed that, in general, the preponderance of clonality increased along the latitudinal gradient towards cold, dry or very wet environments. However, the distribution of clonality in China was significantly but only weakly correlated with latitude and four climatic factors (mean annual temperature, temperature seasonality, mean annual precipitation, precipitation seasonality). Clonality of woody and herbaceous species had opposite responses to climatic variables. More precisely, woody clonality showed higher frequency in wet or climatically stable environments, while herbaceous clonality preferred cold, dry or climatically instable environments. Unexplained variation in clonality may be owed to the influences of other environmental conditions and to different clonal strategies and underlying traits adopted by different growth forms and phylogenetic lineages. Therefore, in-depth research in terms of more detailed clonal growth form, phylogeny and additional environmental variables are encouraged to further understand plant clonality response to climatic and/or edaphic conditions.

Plant interactions greatly affect plant community structure. Dryland ecosystems are characterized by low amounts of unpredictable precipitation as well as by often having biological soil crusts (BSCs) on the soil surface. In dryland plant communities, plants interact mostly as they compete for water resources, and the direction and intensity of plant interaction varies as a function of the temporal fluctuation in water availability. Since BSCs influence water redistribution to some extent, a greenhouse experiment was conducted to test the hypothesis that the intensity and direction of plant interactions in a dryland plant community can be modified by BSCs. In the experiment, 14 combinations of four plant species (Artemisia ordosica, Artemisia sphaerocephala, Chloris virgata and Setaria viridis) were subjected to three levels of coverage of BSCs and three levels of water supply. The results show that: 1) BSCs affected plant interaction intensity for the four plant species: a 100% coverage of BSCs significantly reduced the intensity of competition between neighboring plants, while it was highest with a 50% coverage of BSCs in combination with the target species of A. sphaerocephala and C. virgata; 2) effects of the coverage of BSCs on plant interactions were modified by water regime when the target species were C. virgata and S. viridis; 3) plant interactions were species-specific. In conclusion, the percent coverage of BSCs affected plant interactions, and the effects were species-specific and could be modified by water regimes. Further studies should focus on effects of the coverage of BSCs on plant-soil hydrological processes.

Arid areas play a significant role in the global nitrogen cycle. Dry and wet deposition of inorganic nitrogen (N) species were monitored at one urban (SDS) and one suburban (TFS) site at Urumqi in a semi-arid region of central Asia. Atmospheric concentrations of NH3, NO2, HNO3, particulate ammonium and nitrate (pNH4 (+) and pNO3 (-)) concentrations and NH4-N and NO3-N concentrations in precipitation showed large monthly variations and averaged 7.1, 26.6, 2.4, 6.6, 2.7 µg N m(-3) and 1.3, 1.0 mg N L(-1) at both SDS and TFS. Nitrogen dry deposition fluxes were 40.7 and 36.0 kg N ha(-1) yr(-1) while wet deposition of N fluxes were 6.0 and 8.8 kg N ha(-1) yr(-1) at SDS and TFS, respectively. Total N deposition averaged 45.8 kg N ha(-1) yr(-1)at both sites. Our results indicate that N dry deposition has been a major part of total N deposition (83.8% on average) in an arid region of central Asia. Such high N deposition implies heavy environmental pollution and an important nutrient resource in arid regions.

The treatment of squamous carcinoma, especially multidrug resistance (MDR) tumors, represents one of the most formidable challenges in oncology. In this study, integrin-mediated Pluronic-based micellar system (c(RGDyK)-FP-DP) was proposed as a drug delivery system to enhance the in vivo anti-tumor efficacy in MDR human squamous carcinoma (KBv)-bearing. Following the recognition by integrin proteins express on the cell surface, cellular uptake and in vitro anti-tumor efficacy of c(RGDyK)-FP-DP were better than conventional PF-DP in KBv cells. The tumor homing specificity and further in vivo anticancer efficacy of c(RGDyK)-FP-DP were performed using subcutaneous KBv tumor-bearing mice model, respectively. Compared with PF-DP, c(RGDyK)-FP-DP demonstrated more drug accumulation in tumor and relatively less drug accumulation in heart, and an extended median survival time in the KBv tumor-bearing mice model. Furthermore, preliminary in vivo subacute toxicity evaluation was also conducted by the measurement of histopathology, blood cell counts and clinical biochemistry parameters. Results showed that no obvious toxicity was observed to the hematological system or heart after a series of intravenous administration of c(RGDyK)-FP-DP. In conclusion, our results suggested that c(RGDyK) peptide conjugated Pluronic micelles could be a promising vehicle for enhancing the treatment of MDR human squamous carcinoma.

In this study, a novel adamantanamine-paclitaxel (AD-PTX) incorporated oligochitosan- carboxymethyl-β-cyclodextrin (CSO-g-CM-β-CD) self-assembly macromolecular (CSO-g-CM-β-CD@AD-PTX) micelle was successfully prepared in water through sonication. The formed molecules were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (NMR) spectroscopy, two-dimensional NMR, elemental analysis, and liquid chromatography-mass spectrometry, while the correspondent micelles were characterized by dynamic light scattering and transmission electron microscopy. We showed that the macromolecular micelle contained a spherical core-shell structure with a diameter of 197.1 ± 3.3 nm and zeta potential of -19.1 ± 4.3 mV. The CSO-g-CM-β-CD@AD-PTX micelle exhibited a high drug-loading efficacy up to 31.3%, as well as a critical micelle concentration of 3.4 × 10-7 M, which indicated good stability. Additionally, the in vitro release profile of the CSO-g-CM-β-CD@AD-PTX micelle demonstrated a long-term release pattern, 63.1% of AD-PTX was released from the micelle during a 30-day period. Moreover, the CSO-g-CM-β-CD@AD-PTX micelle displayed cytotoxicity at a sub-μM scale similar to PTX in U87 MG cells, and CSO-g-CM-β-CD exhibited a good safety profile by not manifesting significant toxicity at concentrations up to 100 μM. These results indicated that β-CD-based inclusion complexation resulting in biodegradable self-assembled macromolecular micelles can be utilized as nanocarrier, and may provide a promising platform for drug delivery in the future medical applications.