Search

To explore the applicability of the carbon isotope composition (δ13C) of fossil charcoal for the quantitative reconstruction of paleoclimates, we selected five points in Shaanxi province, from north to south, to collect modern Pinus species and Quercus species to sample covering areas with obvious climatic differences. In order to reveal the relationships between δ13C of charcoal and climate variables on the basis of carbonization experiments, we evaluated the fractionation mechanism of δ13C of charcoal, and compared the differences between δ13C of charcoal in wildfire experiments and indoor experiments regarding genera and species. The results showed significant differences in δ13C between genera but no significant differences among species. Additionally, the δ13C of charcoal was significantly negatively correlated with precipitation and positively correlated with evaporation, which could be determined from δ13C values in the study area to reconstruct ancient precipitation and evaporation in the future. [ABSTRACT FROM AUTHOR]

High effective low-cost substance derived from agriculture-based waste towards a circular economy concept showed a significant green approach for pharmaceuticals uptake in aqueous solution. Beachwood sawdust was used as the source of cellulose based adsorbents. Cellulose is isolated from the waste and in parallel magnetite nanoparticles are prepared by the simple co-precipitation technique and the two substances are mixed in various proportions to be acetaminophen adsorbent. Characteristics of the prepared magnetite (M)/sawdust (SD) composite in various proportions (M:SD (1:1), M:SD (1:2), M:SD (1:3), M:SD (1:5) and M:SD (2:1) were assessed using scanning electron microscope (SEM) transmission electron microscope (TEM) and X-ray diffractometer (XRD) which revealed the presence magnetite and cellulose. Also, for the object of recoverable adsorbent, vibrating sample magnetometer (VSM) of the adsorbent is investigated to evaluate its sustainability. The highest removal rate was associated with M:SD (1:2) compared to the other composites and the pristine magnetite or sawdust materials within 2 hours of isotherm time. The adsorption parameters are optimized and the maximal yield is attained at pH (7.0), adsorbent dose of 2.0 g/L at room temperature. The adsorption matrix is following Langmuir model and fitted to the second-order kinetic model. The process is exothermic in nature and highlighted physisorption tendency. The highest monolayer adsorption uptake was investigated at 7.0 mg/g which corresponds to the M:SD (1:2) adsorbent., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Hassan et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

With the increasing demand for building acoustic performance, accurately evaluating the acoustic performance of building walls has become an important research topic. However, existing research has mostly focused on general building materials such as concrete, iron and steel, and glass. For wooden structure wall, due to the sound absorption performance of the materials themselves and the complexity of structural design, the analysis of their acoustic performance is still relatively weak. Moreover, there is a lack of quantitative description of their spectral characteristics and acoustic impedance. To analyze the acoustic performance of wooden structure building walls, Building Information Model (BIM) and impedance tube method were integrated to construct a building wall performance testing system with BIM technology. The impedance tube method was applied and testing functions for sound absorption and insulation performance were designed. The outcomes indicated that in the error test, the error range between the experimental group and the control group was [0.01, 0.18], indicating a high reliability of the experimental results. In the calculation of sound insulation of different specimens at different sound frequencies, when the frequency was 1600Hz, the sound insulation of the control group and experimental group was 65.30dB and 70.14dB, proving the effectiveness of the design method. The above results demonstrate the practicality of integrating BIM technology and impedance tube method in the acoustic performance analysis of wooden structure building walls. This study provides strong technical support for reducing the indoor environment of wooden buildings and improving the comfort of people's living environment., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Yin, Ai. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Energy application potential from the abundant biomass residues is inadequately exploited. Over-dependence on forest trees, its negative environmental impacts, and ever-rising energy costs require alternative production technologies including briquetting. The physico-mechanical and combustion properties of binderless and bindered Alstonia boonei sawdust and Theobroma cacao (cocoa) pod briquettes, carbonized in a steel kiln (at 410±5°C, and a heating rate of 4°C/min from the ambient temperature of 25°C), piston-pressed at 9.0 MPa, were studied. The binders were starch, wax, and clay. Starch-bindered T. cacao pod briquettes recorded the maximum bulk density (640 kg/cm3), while basic density was greatest for sawdust/clay briquette (433 kg/cm3). Sawdust/wax briquette produced much Water Resistance Capacity (76.76%) with safer carbon monoxide (CO) emissions (0.67 ppm). A. boonei sawdust/starch briquettes recorded the greatest calorific value (24.023 MJ/kg), least specific fuel consumption (0.0483 kg/l), and slowest burning rate (0.0005 kg/min). All but T. cacao pod/starch and Sawdust/starch emitted CO below the safe air quality Standard of ≤ 6ppm (24h mean). Binderless sawdust, sawdust/starch and T. cacao pod/starch briquettes recorded 47.86, 20.95 and 11.40 μg/m3 particulate matter (PM2.5) respectively, which are below WHO Air Quality Standard safe for domestic uses. Binderless T. cacao pod produced more harmful CO and PM2.5 than its non-bindered A. boonei sawdust counterpart. Clay-bindered briquettes were the most durable. Briquetting, 'a waste-to-energy technology', enhances bio-residue management for domestic and industrial spaces in the global energy mix., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Glalah et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Agarwood is a resinous heartwood of Aquilaria sinensis that is formed in response to mechanical wounding. In the present study pre-treatment of Aquilaria sinensis was carried out, and then the dominant fungi were isolated and purified from the surface and electroshock holes of trees. The isolated Trichoderma sp. and Neurospora sp. were then screened for resistance against benzyl acetone and then inoculated into healthy Aquilaria sinensis trees. After six months, the agarwood was collected for analysis. The chemical composition of incense was analyzed using gas chromatography-mass spectroscopy, and 82 chemical constituents were identified. Agarwood products formed by using Trichoderma sp. and Neurospora sp. consisted of 50.22% and 48.71% ether extracts, respectively, which surpassed the 10% threshold specified by the Chinese Pharmacopoeia. Similarly, relative aromatic contents in the two agarwood products were 30.1% and 32.86%, while proportions of sesquiterpene constituents were 10.21% and 11.19%, respectively. These two agarwood-specific chemical constituents accounted for a large proportion of the total chemical composition, which showed that the generated agarwood was of good quality. The results of the study revealed that both Trichoderma sp. and Neurospora sp. were able to effectively induce agarwood production in Aquilaria sinensis trees in 6 months. This study expands the library of fungi that promote the production of agarwood from Aquilaria sinensis trees., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Liu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The analysis of critical states during fracture of wood materials is crucial for wood building safety monitoring, wood processing, etc. In this paper, beech and camphor pine are selected as the research objects, and the acoustic emission signals during the fracture process of the specimens are analyzed by three-point bending load experiments. On the one hand, the critical state interval of a complex acoustic emission signal system is determined by selecting characteristic parameters in the natural time domain. On the other hand, an improved method of b_value analysis in the natural time domain is proposed based on the characteristics of the acoustic emission signal. The K-value, which represents the beginning of the critical state of a complex acoustic emission signal system, is further defined by the improved method of b_value in the natural time domain. For beech, the analysis of critical state time based on characteristic parameters can predict the "collapse" time 8.01 s in advance, while for camphor pines, 3.74 s in advance. K-value can be analyzed at least 3 s in advance of the system "crash" time for beech and 4 s in advance of the system "crash" time for camphor pine. The results show that compared with traditional time-domain acoustic emission signal analysis, natural time-domain acoustic emission signal analysis can discover more available feature information to characterize the state of the signal. Both the characteristic parameters and Natural_Time_b_value analysis in the natural time domain can effectively characterize the time when the complex acoustic emission signal system enters the critical state. Critical state analysis can provide new ideas for wood health monitoring and complex signal processing, etc., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Jia et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

To investigate the effects of urea-formaldehyde (UF) resin impregnation combined heat treatment (IMPG-HT) on the pyrolysis behavior of poplar wood, the chemical composition, pyrolysis characteristics, pyrolysis kinetics, and gaseous products released during pyrolysis of untreated (control), IMPG-HT, IMPG and HT woods were analyzed. The results demonstrate that IMPG-HT changes pyrolysis behavior of poplar wood significantly. Unlike the control and HT samples, the thermogravimetric / derivative thermogravimetric (TG/DTG) curves of IMPG wood shift toward lower temperature, and the shoulder on DTG curves weaken or even disappear. The maximum mass loss rate of IMPG-HT samples decreases, and carbon residual yield increases to 23% or more and activation energy (E) increases sharply after conversion rate (α) reaching 0.80. HT improves the thermal stability of IMPG wood, which is represented by the increase of decomposition temperature (Td) and DTG peak temperature (Tpeak) and the higher E value of IMPG-HT wood. For the pyrolysis gaseous products, IMPG-HT wood produces nitrogen-containing gases (HNCO and NH3) due to the presence of UF resin, but the amounts of these gases are less than that produced by IMPG wood because the heat treatment had removed part of N elements. [ABSTRACT FROM AUTHOR]

The anatomical structure of wood is complex and contains considerable information about its specific species, physical properties, growth environment, and other factors. While conventional wood anatomy has been established by systematizing the xylem anatomical features, which enables wood identification generally up to genus level, it is difficult to describe all the information comprehensively. This study apply two computer vision approaches to optical micrographs: the scale-invariant feature transform algorithm and connected-component labelling. They extract the shape and pore size information, respectively, statistically from the whole micrographs. Both approaches enable the efficient detection of specific features of 18 species from the family Fagaceae. Although the methods ignore the positional information, which is important for the conventional wood anatomy, the simple information on the shape or size of the elements is enough to describe the species-specificity of wood. In addition, according to the dendrograms calculated from the numerical distances of the features, the closeness of some taxonomic groups is inconsistent with the types of porosity, which is one of the typical classification systems for wood anatomy, but consistent with the evolution based on molecular phylogeny; for example, ring-porous group Cerris and radial-porous group Ilex are nested in the same cluster. We analyse which part of the wood structure gave the taxon-specific information, indicating that the latewood zone of group Cerris is similar to the whole zone of group Ilex. Computer vision approaches provide statistical information that uncovers new aspects of wood anatomy that have been overlooked by conventional visual inspection. [ABSTRACT FROM AUTHOR]

A thorough understanding of the heritability, genetic correlations and additive and non-additive variance components of tree growth and wood properties is a requisite for effective tree breeding. This knowledge is essential to maximize genetic gain, that is, the amount of increase in trait performance achieved annually through directional selection. Understanding the genetic attributes of traits targeted by breeding is also important to sustain decade-long genetic progress, that is, the progress made by increasing the average genetic value of the offspring as compared to that of the parental generation. In this study, we report quantitative genetic parameters for fifteen growth, wood chemical and physical traits for the world-famous Eucalyptus urograndis hybrid (E. grandis × E. urophylla). These traits directly impact the optimal use of wood for cellulose pulp, paper, and energy production. A population of 1,000 trees sampled in a progeny trial was phenotyped directly or following the development and use of near-infrared spectroscopy calibration models. Trees were genotyped with 33,398 SNPs and 24,001 DArT-seq genome-wide markers and genomic realized relationship matrices (GRM) were used for parameter estimation with an individual-tree additive-dominant mixed model. Wood chemical properties and wood density showed stronger genetic control than growth, cellulose and fiber traits. Additive effects are the main drivers of genetic variation for all traits, but dominance plays an equally or more important role for growth, singularly in this hybrid. GRM´s with >10,000 markers provided stable relationships estimates and more accurate parameters than pedigrees by capturing the full genetic relationships among individuals and disentangling the non-additive from the additive genetic component. Low correlations between growth and wood properties indicate that simultaneous selection for wood traits can be applied with minor effects on genetic gain for growth. Conversely, moderate to strong correlations between wood density and chemical traits exist, likely due to their interdependency on cell wall structure such that responses to selection will be connected for these traits. Our results illustrate the advantage of using genome-wide marker data to inform tree breeding in general and have important consequences for operational breeding of eucalypt urograndis hybrids. [ABSTRACT FROM AUTHOR]

Biochar production and use are part of the modern agenda to recycle wastes, and to retain nutrients, pollutants, and heavy metals in the soil and to offset some greenhouse gas emissions. Biochars from wood (eucalyptus sawdust, pine bark), sugarcane bagasse, and substances rich in nutrients (coffee husk, chicken manure) produced at 350, 450 and 750°C were characterized to identify agronomic and environmental benefits, which may enhance soil quality. Biochars derived from wood and sugarcane have greater potential for improving C storage in tropical soils due to a higher aromatic character, high C concentration, low H/C ratio, and FTIR spectra features as compared to nutrient-rich biochars. The high ash content associated with alkaline chemical species such as KHCO3 and CaCO3, verified by XRD analysis, made chicken manure and coffee husk biochars potential liming agents for remediating acidic soils. High Ca and K contents in chicken manure and coffee husk biomass can significantly replace conventional sources of K (mostly imported in Brazil) and Ca, suggesting a high agronomic value for these biochars. High-ash biochars, such as chicken manure and coffee husk, produced at low-temperatures (350 and 450°C) exhibited high CEC values, which can be considered as a potential applicable material to increase nutrient retention in soil. Therefore, the agronomic value of the biochars in this study is predominantly regulated by the nutrient richness of the biomass, but an increase in pyrolysis temperature to 750°C can strongly decrease the adsorptive capacities of chicken manure and coffee husk biochars. A diagram of the agronomic potential and environmental benefits is presented, along with some guidelines to relate biochar properties with potential agronomic and environmental uses. Based on biochar properties, research needs are identified and directions for future trials are delineated. [ABSTRACT FROM AUTHOR]

Anthracological analyses of charcoal samples retrieved from Pit 16 of Perdigões (Reguengos de Monsaraz, Portugal), a secondary deposition of cremated human remains dated back to the middle of the 3rd millennium BC, enabled the identification of 7 different taxa: Olea europaea, Quercus spp. (evergreen), Pinus pinaster, Fraxinus cf. angustifolia, Arbutus unedo, Cistus sp. and Fabaceae. All taxa are characteristic of both deciduous and evergreen Mediterranean vegetation, and this data might indicate that the gathering of woods employed for the human cremation/s occurred either on site, or in its vicinity. However, considering both the large distribution of the identified taxa and data about human mobility, it is not possible to conclusively determine the origin of the wood used in the cremation(s). Chemometric analysis were carried out to estimate the absolute burning temperature of woods employed for the human cremation/s. An in-lab charcoal reference collection was created by burning sound wood samples of the three main taxa identified from Pit 16, Olea europaea var. sylvestris, Quercus suber (evergreen type) and Pinus pinaster, at temperatures between 350 and 600 °C. The archaeological charcoal samples and the charcoal reference collection were chemically characterized by using mid-infrared (MIR) spectroscopy in the 1800-400 cm-1 range, and Partial Least Squares (PLS) regression method was used to build calibration models to predict the absolute combustion temperature of the archaeological woods. Results showed successful PLS forecasting of burn temperature for each taxon (significant (P <0.05) cross validation coefficients). The anthracological and chemometric analysis evidenced differences between the taxa coming from the two stratigraphic units within the Pit, SUs 72 and 74, suggesting that they may come from two different pyres or two different depositional moments., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Coradeschi et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The proportion of bark in tree trunks is in the range of ~ 10-20%. This large amount of material is currently mainly considered as a by- or even waste-product by the timber processing industry. Recently, efforts towards the use of bark have been made, e.g. as a raw material to harvest different chemical compounds or as an additive for wood particle boards. Our motivation for this work was to keep the bark in an almost natural state and explore alternative processes and applications for use. The traditional method of de-barking tree trunks by peeling was used to harvest large bark pieces. Two pieces of peeled bark were placed crosswise, with the rhytidom side (outer bark) facing each other. After different conditioning steps, bark pieces were hot pressed to panels without adding adhesives. These experiments on bark samples of different Central European tree species suggest that production of panels with species dependent properties is possible and feasible. This is a step towards producing sustainable panels by using a natural waste material, while retaining its beneficial structure and its natural chemical composition., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Wenig et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In the search for alternatives to wood fuel, to meet the bio-energy requirement of an ever-increasing global population, the International Network for Bamboo and Rattan has supported farmers in many tropical countries to establish plantations of Beema bamboo (a tissue-cultured clone from Bambusa vulgaris) and Oxytenanthera abyssinica for bio-energy production. The quality of these species as solid biofuels is unknown due to the absence of data on their physico-thermal and emission characteristics. Using the American Standard for Testing and Materials and other internationally accepted standards, their ultimate and proximate analysis, and physico-thermal and emission properties were evaluated. Beema bamboo and O. abyssinica have high Hydrogen, organic and fixed Carbon contents and low quantities of ash, moisture content, volatile matter, Oxygen, Nitrogen and Sulphur. This will contribute to their heating values and low oxide emissions. Based on their High Heating Values (Beema bamboo = 23.22 MJ/kg; O. abyssinica = 23.26 MJ/kg), the species will be suitable for high energy-using applications. The Particulate Matter and Carbon Monoxide concentrations (Beema bamboo: 90 ug/m3 and 2.83 ppm respectively; O. abyssinica: 77.33 ug/m3 and 3.20 ppm respectively) are lower than the threshold (35000 ug/m3 and 9 ppm respectively) approved by the United States Environmental Protection Agency. These properties make the species good raw materials for solid biofuel which is safe for indoor use. Their use will contribute to reducing pressure on tropical forests for wood fuel and the health hazards associated with fossil fuel use., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2022 Boadu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Saproxylic arthropods are thought to play an important role in wood decomposition but very few efforts have been made to quantify their contributions to the process and the factors controlling their activities are not well understood. In the current study, mesh exclusion bags were used to quantify how arthropods affect loblolly pine (Pinus taeda L.) decomposition rates in both seasonally flooded and unflooded forests over a 31-month period in the southeastern United States. Wood specific gravity (based on initial wood volume) was significantly lower in bolts placed in unflooded forests and for those unprotected from insects. Approximately 20.5% and 13.7% of specific gravity loss after 31 months was attributable to insect activity in flooded and unflooded forests, respectively. Importantly, minimal between-treatment differences in water content and the results from a novel test carried out separately suggest the mesh bags had no significant impact on wood mass loss beyond the exclusion of insects. Subterranean termites (Isoptera: Rhinotermitidae: Reticulitermes spp.) were 5–6 times more active below-ground in unflooded forests compared to flooded forests based on wooden monitoring stakes. They were also slightly more active above-ground in unflooded forests but these differences were not statistically significant. Similarly, seasonal flooding had no detectable effect on above-ground beetle (Coleoptera) richness or abundance. Although seasonal flooding strongly reduced Reticulitermes activity below-ground, it can be concluded from an insignificant interaction between forest type and exclusion treatment that reduced above-ground decomposition rates in seasonally flooded forests were due largely to suppressed microbial activity at those locations. The findings from this study indicate that southeastern U.S. arthropod communities accelerate above-ground wood decomposition significantly and to a similar extent in both flooded and unflooded forests. Seasonal flooding has the potential to substantially reduce the contributions of these organisms to wood decomposition below-ground, however. [ABSTRACT FROM AUTHOR]

The impulse-cyclone drying and the silane coupling agent (A187) modification are applied to treat wood fibers under the following conditions: 180°C, 180°C+A187, 200°C+A187, 220°C+A187 and 240°C+ A187. Then, HDPE/wood fiber composites are fabricated with a two-stage plastic extruder, and the effects of impulse-cyclone drying technique on the UV-accelerated aging properties of composites are investigated. Fourier-transform infrared spectroscopy (FTIR) reveals that the silane coupling agent chemically reacts with the hydroxyl groups on the wood fiber surfaces, the anti-UV aging properties of composites is enhanced. Mechanical test shows that during the 0-3000 h of UV aging process, the mechanical properties of samples tend to increase initially and then decrease within a period of time. After 3000 h of UV aging, the specimen 4 exhibits the least loss of mechanical properties, with flexural modulus, flexural modulus and impact strength of 65.40 Mpa, 2082.08 Mpa and 12.85 Mpa, respectively. The effects of impulse-cyclone drying technique on the UV-accelerated aging properties of composites are investigated through Spectrophotometry and Surface microstructure observation. indicates that the ΔL* and ΔE* values increase greatly at the stage of 0-1000 h aging, which though tend to stabilize after 1000 h. The degree of discoloration changes little for specimen 4,and the number of surface cracks is relatively small, which exhibits the optimal aging resistance. In conclusion, the addition of wood fibers treated by impulse-cyclone drying (220°C) and A187 modification is effective in enhancing the anti-UV aging properties of HDPE/wood fiber composites. Nevertheless, such enhancing effect turns to decline when the temperature of impulse-cyclone drying treatment is excessively high., Competing Interests: The author(s) declared no potential conflflicts of interest with respect to the research, authorship, and/or publication of this article.

Inspired by theories of higher local order autocorrelation (HLAC), this paper presents a simple, novel, yet very powerful approach for wood recognition. The method is suitable for wood database applications, which are of great importance in wood related industries and administrations. At the feature extraction stage, a set of features is extracted from Mask Matching Image (MMI). The MMI features preserve the mask matching information gathered from the HLAC methods. The texture information in the image can then be accurately extracted from the statistical and geometrical features. In particular, richer information and enhanced discriminative power is achieved through the length histogram, a new histogram that embodies the width and height histograms. The performance of the proposed approach is compared to the state-of-the-art HLAC approaches using the wood stereogram dataset ZAFU WS 24. By conducting extensive experiments on ZAFU WS 24, we show that our approach significantly improves the classification accuracy. [ABSTRACT FROM AUTHOR]

Background: Chitinases are prevalent in life and are found in species including archaea, bacteria, fungi, plants, and animals. They break down chitin, which is the second most abundant carbohydrate in nature after cellulose. Hence, they are important for maintaining a balance between carbon and nitrogen trapped as insoluble chitin in biomass. Chitinases are classified into two families, 18 and 19 glycoside hydrolases. In addition to a catalytic domain, which is a triosephosphate isomerase barrel, many family 18 chitinases contain another module, i.e., chitinase insertion domain. While numerous studies focus on the biological role of the catalytic domain in chitinase activity, the function of the chitinase insertion domain is not completely understood. Bioinformatics offers an important avenue in which to facilitate understanding the role of residues within the chitinase insertion domain in chitinase function. Results: Twenty-seven chitinase insertion domain sequences, which include four experimentally determined structures and span five kingdoms, were aligned and analyzed using a modified sequence entropy parameter. Thirty-two positions with conserved residues were identified. The role of these conserved residues was explored by conducting a structural analysis of a number of holo-enzymes. Hydrogen bonding and van der Waals calculations revealed a distinct subset of four conserved residues constituting two sequence motifs that interact with oligosaccharides. The other conserved residues may be key to the structure, folding, and stability of this domain. Conclusions: Sequence and structural studies of the chitinase insertion domains conducted within the framework of evolution identified four conserved residues which clearly interact with the substrates. Furthermore, evolutionary studies propose a link between the appearance of the chitinase insertion domain and the function of family 18 chitinases in the subfamily A. [ABSTRACT FROM AUTHOR]

Copper is a common component in wood preservatives and is used to protect the wood against fungal degradation. Previous research has shown that the Cu++ oxidation state provides the best wood protection, and Cu++ is widely believed to be the oxidation state of most copper within treated wood. A recent study using X-ray absorption near edge spectroscopy (XANES) reported high amounts of Cu+ in wood that had been in contact with corroded fasteners. This study uses XANES to examine the copper oxidation states in wood treated with several different wood preservatives as a function of time after treatment. In contrast with previous literature which focused on the fixation reaction in the first few hours after treatment, this paper examines the oxidation state of Cu in treated wood at longer times (up to 1-year) after treatment. The results showed in nearly all cases, Cu was in the Cu++ oxidation state to within the measurement uncertainty. Cu XANES patterns taken approximately 1-year after treatment showed no discernable differences between preservative systems, indicating that regardless of the starting treatment the final Cu speciation is the same within one year. The results confirm previously held beliefs about the Cu oxidation states in wood and give further insights into the corrosion mechanism of metals embedded in treated wood., Competing Interests: The authors have declared that no competing interests exist.

Capirona (Calycophyllum spruceanum (Benth.) K. Schum.) and Bolaina (Guazuma crinita Lam.) are fast-growing Amazonian trees with increasing demand in timber industry. Therefore, it is necessary to determine the content of cellulose, hemicellulose, holocellulose and lignin in juvenile trees to accelerate forest breeding programs. The aim of this study was to identify chemical differences between apical and basal stem of Capirona and Bolaina to develop models for estimating the chemical composition using Fourier transform infrared (FTIR) spectra. FTIR-ATR spectra were obtained from 150 samples for each species that were 1.8 year-old. The results showed significant differences between the apical and basal stem for each species in terms of cellulose, hemicellulose, holocellulose and lignin content. This variability was useful to build partial least squares (PLS) models from the FTIR spectra and they were evaluated by root mean squared error of predictions (RMSEP) and ratio of performance to deviation (RPD). Lignin content was efficiently predicted in Capirona (RMSEP = 0.48, RPD > 2) and Bolaina (RMSEP = 0.81, RPD > 2). In Capirona, the predictive power of cellulose, hemicellulose and holocellulose models (0.68 < RMSEP < 2.06, 1.60 < RPD < 1.96) were high enough to predict wood chemical composition. In Bolaina, model for cellulose attained an excellent predictive power (RMSEP = 1.82, RPD = 6.14) while models for hemicellulose and holocellulose attained a good predictive power (RPD > 2.0). This study showed that FTIR-ATR together with PLS is a reliable method to determine the wood chemical composition in juvenile trees of Capirona and Bolaina., Competing Interests: The authors have declared that no competing interests exist.

The timeframe of Indigenous settlements in Northeast North America in the 15th-17th centuries CE has until very recently been largely described in terms of European material culture and history. An independent chronology was usually absent. Radiocarbon dating has recently begun to change this conventional model radically. The challenge, if an alternative, independent timeframe and history is to be created, is to articulate a high-resolution chronology appropriate and comparable with the lived histories of the Indigenous village settlements of the period. Improving substantially on previous initial work, we report here high-resolution defined chronologies for the three most extensively excavated and iconic ancestral Kanien'kehá꞉ka (Mohawk) village sites in New York (Smith-Pagerie, Klock and Garoga), and a fourth early historic Indigenous site, Brigg's Run, and re-assess the wider chronology of the Mohawk River Valley in the mid-15th to earlier 17th centuries. This new chronology confirms initial suggestions from radiocarbon that a wholesale reappraisal of past assumptions is necessary, since our dates conflict completely with past dates and the previously presumed temporal order of these three iconic sites. In turn, a wider reassessment of northeastern North American early history and re-interpretation of Atlantic connectivities in the later 15th through early 17th centuries is required. Our new closely defined date ranges are achieved employing detailed archival analysis of excavation records to establish the contextual history for radiocarbon-dated samples from each site, tree-ring defined short time series from wood charcoal samples fitted against the radiocarbon calibration curve ('wiggle-matching'), and Bayesian chronological modelling for each of the individual sites integrating all available prior knowledge and radiocarbon dating probabilities. We define (our preferred model) most likely (68.3% highest posterior density) village occupation ranges for Smith-Pagerie of ~1478-1498, Klock of ~1499-1521, Garoga of ~1550-1582, and Brigg's Run of ~1619-1632., Competing Interests: The authors have declared that no competing interests exist.

Wood-inhabiting fungi are crucial to wood decay and decomposition in S. psammophila sand barriers, which in turn consumingly influence nutrient dynamics in desert soils. In the case of an extremely arid desert, as opposed to forests, little of known about the fungal community composition of decaying wood and the effects of decomposing wood on soil physical and chemical properties. Combined with high-throughput gene sequencing technology, we investigated the relationships between microenvironment factors with fungal community composition and diversity during the decomposition of Salix psammophila sand barriers. The results showed that the destruction of lignocellulose components during the decay process of S. psammophila sand barrier alters the physical and chemical properties of the surrounding soil. Compared with one-year sand barrier, lignin and cellulose of seven-year S. psammophila sand barrier decreased by 40.48% and 38.33%, respectively. Soil available potassium and available nitrogen increased by 39.80% and 99.46%, respectively. We confirmed that soil available nitrogen, soil pH and soil moisture content significantly affected the fungal community distribution of S. psammophila sand barriers. Sordariomycetes are mainly affected by the positive correlation of soil pH, while Eurotiomycetes are most affected by the positive correlation of soil moisture content and soil porosity. Although our results highlighted the importance of bidirectional interactions between fungi in decayed sand barriers and soil properties, their contribution to the desert ecosystem still needs further confirmation from future studies. However, overall our findings improved the current understanding of the sand barrier-soil interactions on the process of ecological restoration., Competing Interests: The authors have declared that no competing interests exist.

In this study, a series of small-scale experiments were conducted to investigate the backdraft phenomenon in a compartment (1.1 × 0.4 × 0.75 m) with woodblocks as fuel. This research focused on the effects of compartment window woodblock areas on backdraft time, with a video recording of the experimental phenomena. Thermocouples and a gas analyzer were used to measure the temperature and the concentration of gas components in the compartment, respectively. There was no additional heat source or ignition source pre-set in the compartment at the beginning of the experiments; the experimental processes only depended on the heat released from the burning or smoldering of woodblocks. When compartment ventilation improved, smoldering of woodblocks became intense, and backdraft occurred. The results show that backdraft time is shorten with increases of compartment window and woodblock areas, and opening the upper window of a compartment could avoid the backdraft phenomenon. The results help to understand the backdraft phenomenon of solid fuel and, more importantly, could help firefighters adopt reasonable fire-fighting strategies for restraining backdraft occurrence., Competing Interests: The authors have declared that no competing interests exist.

Coarse woody debris (CWD) is a significant component of the forest biomass pool; hence a model is warranted to predict CWD decomposition and its role in forest carbon (C) and nutrient cycling under varying management and climatic conditions. A process-based model, CWDDAT (Coarse Woody Debris Decomposition Assessment Tool) was calibrated and validated using data from the FACE (Free Air Carbon Dioxide Enrichment) Wood Decomposition Experiment utilizing pine (Pinus taeda), aspen (Populous tremuloides) and birch (Betula papyrifera) on nine Experimental Forests (EF) covering a range of climate, hydrology, and soil conditions across the continental USA. The model predictions were evaluated against measured FACE log mass loss over 6 years. Four widely applied metrics of model performance demonstrated that the CWDDAT model can accurately predict CWD decomposition. The R2 (squared Pearson's correlation coefficient) between the simulation and measurement was 0.80 for the model calibration and 0.82 for the model validation (P<0.01). The predicted mean mass loss from all logs was 5.4% lower than the measured mass loss and 1.4% lower than the calculated loss. The model was also used to assess the decomposition of mixed pine-hardwood CWD produced by Hurricane Hugo in 1989 on the Santee Experimental Forest in South Carolina, USA. The simulation reflected rapid CWD decomposition of the forest in this subtropical setting. The predicted dissolved organic carbon (DOC) derived from the CWD decomposition and incorporated into the mineral soil averaged 1.01 g C m-2 y-1 over the 30 years. The main agents for CWD mass loss were fungi (72.0%) and termites (24.5%), the remainder was attributed to a mix of other wood decomposers. These findings demonstrate the applicability of CWDDAT for large-scale assessments of CWD dynamics, and fine-scale considerations regarding the fate of CWD carbon., Competing Interests: The authors have declared that no competing interests exist.

Coarse woody debris (CWD) is an important component in forests, hosting a variety of organisms that have critical roles in nutrient cycling and carbon (C) storage. We developed a process-based model using literature, field observations, and expert knowledge to assess woody debris decomposition in forests and the movement of wood C into the soil and atmosphere. The sensitivity analysis was conducted against the primary ecological drivers (wood properties and ambient conditions) used as model inputs. The analysis used eighty-nine climate datasets from North America, from tropical (14.2° N) to boreal (65.0° N) zones, with large ranges in annual mean temperature (26.5°C in tropical to -11.8°C in boreal), annual precipitation (6,143 to 181 mm), annual snowfall (0 to 612 kg m-2), and altitude (3 to 2,824 m above mean see level). The sensitivity analysis showed that CWD decomposition was strongly affected by climate, geographical location and altitude, which together regulate the activity of both microbial and invertebrate wood-decomposers. CWD decomposition rate increased with increments in temperature and precipitation, but decreased with increases in latitude and altitude. CWD decomposition was also sensitive to wood size, density, position (standing vs downed), and tree species. The sensitivity analysis showed that fungi are the most important decomposers of woody debris, accounting for over 50% mass loss in nearly all climatic zones in North America. The model includes invertebrate decomposers, focusing mostly on termites, which can have an important role in CWD decomposition in tropical and some subtropical regions. The role of termites in woody debris decomposition varied widely, between 0 and 40%, from temperate areas to tropical regions. Woody debris decomposition rates simulated for eighty-nine locations in North America were within the published range of woody debris decomposition rates for regions in northern hemisphere from 1.6° N to 68.3° N and in Australia., Competing Interests: The authors have declared that no competing interests exist.

The Museo Nazionale della Scienza e della Tecnologia "Leonardo da Vinci" in Milan is exposing two pairs of canal lock gates, used to control the water flow in Milan canal system, whose design appears in the Leonardo's Codex Atlanticus. The wood present in the gates has been deeply characterised by mean of a multidisciplinary investigation involving i) DNA barcoding of wood fragments; ii) microbial community characterisation, and iii) chemical analyses. DNA barcoding revealed that two fragments of the gates belonged to wood species widely used in the middle age: Fagus sylvatica and Picea abies. The chemical characterisations were based on the use of ionic liquid as dissolving medium in order to analyse the entire cell wall material by means of Gel Permeation Chromatography (GPC) and 2D-NMR-HSQC techniques. This multidisciplinary analytical approach was able to highlight the complex nature of the degradation occurred during the gate operation (XVI-XVIII centuries): an intricate interplay between microbial populations (i.e. Shewanella), inorganic factors (i.e. iron from nails), physical factors and the lignocellulosic material., Competing Interests: The authors have declared that no competing interests exist.

Brown rot fungi have great potential in biorefinery wood conversion systems because they are the primary wood decomposers in coniferous forests and have an efficient lignocellulose degrading system. Their initial wood degradation mechanism is thought to consist of an oxidative radical-based system that acts sequentially with an enzymatic saccharification system, but the complete molecular mechanism of this system has not yet been elucidated. Some studies have shown that wood degradation mechanisms of brown rot fungi have diversity in their substrate selectivity. Gloeophyllum trabeum, one of the most studied brown rot species, has broad substrate selectivity and even can degrade some grasses. However, the basis for this broad substrate specificity is poorly understood. In this study, we performed RNA-seq analyses on G. trabeum grown on media containing glucose, cellulose, or Japanese cedar (Cryptomeria japonica) as the sole carbon source. Comparison to the gene expression on glucose, 1,129 genes were upregulated on cellulose and 1,516 genes were upregulated on cedar. Carbohydrate Active enZyme (CAZyme) genes upregulated on cellulose and cedar media by G. trabeum included glycoside hyrolase family 12 (GH12), GH131, carbohydrate esterase family 1 (CE1), auxiliary activities family 3 subfamily 1 (AA3&#95;1), AA3&#95;2, AA3&#95;4 and AA9, which is a newly reported expression pattern for brown rot fungi. The upregulation of both terpene synthase and cytochrome P450 genes on cedar media suggests the potential importance of these gene products in the production of secondary metabolites associated with the chelator-mediated Fenton reaction. These results provide new insights into the inherent wood degradation mechanism of G. trabeum and the diversity of brown rot mechanisms., Competing Interests: The authors have declared that no competing interests exist.

To address concerns over plastics in the global environment, this project produced three wood plastics composites (WPCs) which could divert plastics from the waste stream into new materials. The three materials made had a ratio of 85%:15%, 90%:10%, and 95%:5% low density polyethylene (LDPE) to wood powder and were produced using the dissolution method. Physical and mechanical properties of each WPC were evaluated according to Japanese Industrial Standard (JIS) A 5908:2003. Their degradation in nature was evaluated through a graveyard test and assay test conducted in Coptotermes curvignathus termites. Results showed that density, moisture content, thickness swelling and water absorption of the WPCs fulfilled the JIS standard. The mechanical properties of these composites also met the JIS standard, particularly their modulus of elasticity (MOE). Modulus of rupture (MOR) and internal bonding (IB) showed in lower values, depending on the proportion of wood filler they contained. Discoloration of the WPCs was observed after burial in the soil with spectra alteration of attenuated transmission reflectance (ATR) in the band of 500-1000 cm-1 which could be assigned to detach the interphase between wood and plastics. As termite bait, the WPCs decreased in weight, even though the mass loss was comparatively small. Micro Confocal Raman Imaging Spectrometer revealed that termite guts from insects feeding on WPCs contained small amounts of LDPE. This indicated termite can consume plastics in the form of WPCs. Thus WPCs made predominantly of plastics can be degraded in nature. While producing WPCs can assist in decreasing plastics litter in the environment, the eventual fate of the LDPE in termites is still unknown., Competing Interests: FKS is employed by and receives salary from PT.Horiba Indonesia. This does not alter our adherence to PLOS ONE policies on sharing data and materials.

Image Quality Assessment (IQA) is essential for the accuracy of systems for automatic recognition of tree species for wood samples. In this study, a No-Reference IQA (NR-IQA), wood NR-IQA (WNR-IQA) metric was proposed to assess the quality of wood images. Support Vector Regression (SVR) was trained using Generalized Gaussian Distribution (GGD) and Asymmetric Generalized Gaussian Distribution (AGGD) features, which were measured for wood images. Meanwhile, the Mean Opinion Score (MOS) was obtained from the subjective evaluation. This was followed by a comparison between the proposed IQA metric, WNR-IQA, and three established NR-IQA metrics, namely Blind/Referenceless Image Spatial Quality Evaluator (BRISQUE), deepIQA, Deep Bilinear Convolutional Neural Networks (DB-CNN), and five Full Reference-IQA (FR-IQA) metrics known as MSSIM, SSIM, FSIM, IWSSIM, and GMSD. The proposed WNR-IQA metric, BRISQUE, deepIQA, DB-CNN, and FR-IQAs were then compared with MOS values to evaluate the performance of the automatic IQA metrics. As a result, the WNR-IQA metric exhibited a higher performance compared to BRISQUE, deepIQA, DB-CNN, and FR-IQA metrics. Highest quality images may not be routinely available due to logistic factors, such as dust, poor illumination, and hot environment present in the timber industry. Moreover, motion blur could occur due to the relative motion between the camera and the wood slice. Therefore, the advantage of WNR-IQA could be seen from its independency from a "perfect" reference image for the image quality evaluation., Competing Interests: The authors have declared that no competing interests exist.

Simplification of stand structure of forests and woodlands through human-induced modification is a serious threat to biodiversity. Restoring lost habitat complexity and heterogeneity, such as woody debris, requires an understanding of the relationships between different elements that contribute to stand structure. In this study, we examine the structure and composition of a critically endangered box-gum grassy woodland in south-eastern Australia and relationships with woody debris loads. We found that: (1) despite modification by humans and differing susceptibility to dieback, the two dominant tree species, Blakeley's red gum, Eucalyptus blakelyi and yellow box, E. melliodora, occurred in similar proportions irrespective of vegetation density; (2) E. blakelyi had the largest number of stems and basal area, but while E. melliodora had fewer stems, it had a similar basal area to E. blakelyi. E. melliodora also showed fewer signs of dieback than E. blakelyi with between 40-50% trees in good condition compared to 2% for the latter species; (3) woody debris loads were low compared to other studies in woodland, but there were levels of heterogeneity indicating 'natural' accumulation was occurring; (4) tree basal area and woody debris loads had a 1:1 relationship across all sites and vegetation densities. Overall, our study indicated that ecosystem recovery was taking place (i.e. with many young trees), but there were fewer large trees that are known to supply most woody debris. Our findings highlight the slow accumulation of this critical resource because the volumes were lower than expected. Based on our results, we recommend: (1) aiming for approximately a 50:50 ratio of yellow box to Blakely's red gum basal area in woodland restoration projects; (2) to accelerate the recovery of woodland structure, addition of woody debris should be added at a minimum ratio of 1:1 to standing basal area (i.e. a basal area of 5.99 m2 requires a minimum volume of 3.11 m3) (3) managing for both volume and heterogeneity of woody debris loads; (4) preserving large diameter trees to harness proportionally higher woody debris and litter inputs., Competing Interests: The authors have declared that no competing interests exist.

Herein, the concentrations of food toxicants, polycyclic aromatic hydrocarbons (PAHs) and heterocyclic aromatic amines (HAAs), in salmon fillets smoke flavored with different smoking wood chips (oak, apple, bourbon soaked oak, cherry and hickory) and barbecuing were determined. Benzo[a]anthracene (up to 0.24 ng/g) and chrysene (0.22 ng/g) were determined in the raw salmon fillets. While ∑PAH8 (benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i]perylene, indeno[1,2,3-cd]pyrene) in the raw samples ranged between 0.44 and 0.46 ng/g, smoke flavoring increased the amount of ∑PAH8 and the amount varied between 0.47 and 0.73 ng/g. Salmon smoked flavored with bourbon soaked oak, cherry and hickory wood chips and barbecued showed significantly (P <0.05) lower contents of ∑PAH4 (benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[a]pyrene) and ∑PAH8 compared to non-smoke flavored barbecued samples. Additionally, smoke flavoring with apple, bourbon soaked oak, and cherry wood chips significantly (P <0.05) reduced the total HAA contents in barbecued salmon. A remarkable result was that the bourbon-soaked oak and cherry wood chips had inhibitory effects on both PAH and HAA contents. In sum, barbecued non-smoke flavored and smoke flavored salmon with different wood chips could be considered safe from the perspective of the detected amounts of PAHs and HAAs in salmon fillets., Competing Interests: The authors have declared that no competing interests exist.

Moisture influences most physical wood properties and plays an important role in degradation processes. Like most other porous materials, wood exhibits sorption hysteresis. That is, the moisture content is higher if equilibrium is reached by desorption than if it is reached by absorption under the same ambient climate conditions. The mechanism of moisture uptake by wood are different in the hygroscopic and over-hygroscopic moisture ranges and due to methodical issues, most studies of sorption hysteresis have been performed in the hygroscopic range. In the present study, total sorption hysteresis was separated into hysteresis in cell wall water and capillary water respectively in the whole moisture range by a novel combination of experimental techniques. Wood specimens were conditioned to several high moisture contents using a new system based on the pressure plate technique, and the distinction between cell wall water and capillary water was done with differential scanning calorimetry. The results showed that sorption hysteresis in wood cell walls exists in the whole moisture range. The cell walls were not saturated with water until the whole wood specimen was saturated which contradicts the long-held dogma that cell walls are saturated before significant amounts of capillary water are present in wood., Competing Interests: The authors have declared that no competing interests exist.

The occurrence of old-growth forests is quite limited in Mediterranean islands, which have been subject to particularly pronounced human impacts. Little is known about the carbon stocks of such peculiar ecosystems compared with different stages of secondary succession. We investigated the carbon variation in aboveground woody biomass, in litter and soil, and the nitrogen variation in litter and soil, in a 100 years long secondary succession in Mediterranean ecosystems. A vineyard, three stages of plant succession (high maquis, maquis-forest, and forest-maquis), and an old growth forest were compared. Soil samples at two soil depths (0-15 and 15-30 cm), and two litter types, relatively undecomposed and partly decomposed, were collected. Carbon stock in aboveground woody biomass increased from 6 Mg ha-1 in the vineyard to 105 Mg ha-1 in old growth forest. Along the secondary succession, soil carbon considerably increased from about 33 Mg ha-1 in the vineyard to about 69 Mg ha-1 in old growth forest. Soil nitrogen has more than doubled, ranging from 4.1 Mg ha-1 in the vineyard to 8.8 Mg ha-1 in old growth forest. Both soil parameters were found to be affected by successional stage and soil depth but not by their interaction. While the C/N ratio in the soil remained relatively constant during the succession, the C/N ratio of the litter strongly decreased, probably following the progressive increase in the holm oak contribution. While carbon content in litter decreased along the succession, nitrogen content slightly increased. Overall, carbon stock in aboveground woody biomass, litter and soil increased from about 48 Mg ha-1 in the vineyard to about 198 Mg ha-1 in old growth forest. The results of this study indicate that, even in Mediterranean environments, considerable amounts of carbon may be stored through secondary succession processes up to old growth forest., Competing Interests: The authors have declared that no competing interests exist.

Rubber surfacing is often used in playgrounds due to its potential injury prevention benefits and as a way to recycle waste tires. Available research on chemicals in recycled rubber has focused on synthetic turf applications, but is limited for playground rubber surfacing. Potential lead contamination from vulcanizing agents used in rubber surfacing are a possible concern; however this has not been researched. We examined levels of lead in poured-in-place rubber and compared them to levels in soil, sand, and wood mulch materials from 28 randomly selected playgrounds in Boston, MA, USA using X-ray fluorescence. To evaluate the association between material type and lead concentrations, we conducted a two-way ANOVA with repeated measures and built a linear regression model controlling for distance to major roadway, neighborhood-level status as an environmental justice area, peeling paint on the playground, and rubber condition. Average lead levels were 65.7 μg/g for soil, 22.0 μg/g for rubber, 8.5 μg/g for sand, and 9.0 μg/g for mulch. Our finding of lower concentrations of lead in sand and mulch compared to rubber and soil should be used to inform playground design to optimize children's health, alongside other chemical and safety considerations., Competing Interests: The authors have declared that no competing interests exist.

Abydos is a large, complex archaeological site located approximately 500 km south of Cairo in Upper Egypt. The site has served as a cemetery for thousands of years and is where most of the Early Dynastic royal tombs are located. North Abydos includes the Middle Cemetery and the North Cemetery, which are separated from each other by a wadi. The Middle Cemetery was the burial ground for important Sixth Dynasty (2407-2260 BC) officials and over time for thousands of elite and non-elite individuals as well. Excavations at the core area of the Old Kingdom mortuary landscape have revealed many culturally important wooden objects but these are often found with extensive deterioration that can compromise their preservation. The objectives of this study were to characterize the biodegradation that has taken place in excavated wooden objects, elucidate the type of wood degradation present, obtain information on soil properties at the site and identify fungi currently associated with the wood and soils. Light and scanning electron microscopy studies were used to observe the micromorphological characteristics of the wood, and culturing on different media was done to isolate fungi. Identification of the fungi was done by examining morphological characteristics and extracting rDNA from pure cultures and sequencing the ITS region. Wooden objects, made from Cedrus, Juniperus and Acacia as well as several unidentified hardwoods, were found with extensive degradation and were exceedingly fragile. Termite damage was evident and frass from the subterranean termites along with sand particles were present in most woods. Evidence of soft rot attack was found in sections of wood that remained. Fungi isolated from wood and soils were identified as species of Aspergillus, Chaetomium, Cladosporium, Fusarium, Penicillium, Stemphylium Talaromyces and Trichoderma. Results provide important information on the current condition of the wood and gives insights to the identity of the fungi in wood and soils at the site. These results provide needed information to help develop conservation plans to preserve these degraded and fragile wooden objects., Competing Interests: The authors have declared that no competing interests exist.

Objectives: There is highly suggestive evidence for an effect of air pollution exposure on dementia-related outcomes, but evidence is not yet present to clearly pinpoint which pollutants are the probable causal agents. The aims of this study was to assess the longitudinal association between exposures of fine ambient particulate matter (PM2.5) from residential wood burning, and vehicle exhaust, with dementia., Method: We used data from the Betula study, a longitudinal study of dementia in Umeå, Northern Sweden. The study size was 1 806 and the participants were followed from study entry (1993-1995) to 2010. Modelled levels of source-specific fine particulate matter at the residential address were combined with information on wood stoves or wood boilers, and with validated data on dementia diagnosis and individual-level characteristics from the Betula study. Cox proportional hazards models were used to estimate Hazard Ratios (HRs) and their 95% CIs for dementia incidence (vascular dementia and Alzheimer's disease), adjusted for individual-level characteristics., Results: The emission of PM2.5 from local residential wood burning was associated with dementia incidence with a hazard ratio of 1.55 for a 1 μg/m3 increase in PM2.5 (95% Confidence Interval (CI): 1.00-2.41, p-value 0.05). Study participants with an address in an area with the highest quartile of PM2.5 from residential wood burning and who also had a wood-burning stove were more likely to develop dementia than those in the lower three quartiles without a wood-burning stove with hazard ratios of 1.74 (CI: 1.10-2.75, p-value 0.018). Particulate matter from traffic exhaust seemed to be associated with dementia incidence with hazard ratios of 1.66, (CI: 1.16-2.39), p-value 0.006, and 1.41 (CI: 0.97-2.23), p-value 0.07, in the third and fourth quartiles, respectively., Conclusions: If the associations we observed are causal, then air pollution from residential wood burning, and air pollution from traffic, might be independent important risk factors for dementia., Competing Interests: The authors have declared that no competing interests exist.

Mercury (Hg) is deposited from the atmosphere to remote areas such as forests, but the amount of Hg in trees is not well known. To determine the importance of Hg in trees, we analyzed foliage, bark and bole wood of eight tree species at four sites in the northeastern USA (Huntington Forest, NY; Sleepers River, VT; Hubbard Brook, NH; Bear Brook, ME). Foliar concentrations of Hg averaged 16.3 ng g-1 among the hardwood species, which was significantly lower than values in conifers, which averaged 28.6 ng g-1 (p < 0.001). Similarly, bark concentrations of Hg were lower (p < 0.001) in hardwoods (7.7 ng g-1) than conifers (22.5 ng g-1). For wood, concentrations of Hg were higher in yellow birch (2.1-2.8 ng g-1) and white pine (2.3 ng g-1) than in the other species, which averaged 1.4 ng g-1 (p < 0.0001). Sites differed significantly in Hg concentrations of foliage and bark (p = 0.02), which are directly exposed to the atmosphere, but the concentration of Hg in wood depended more on species (p < 0.001) than site (p = 0.60). The Hg contents of tree tissues in hardwood stands, estimated from modeled biomass and measured concentrations at each site, were higher in bark (mean of 0.10 g ha-1) and wood (0.16 g ha-1) than in foliage (0.06 g ha-1). In conifer stands, because foliar concentrations were higher, the foliar pool tended to be more important. Quantifying Hg in tree tissues is essential to understanding the pools and fluxes of Hg in forest ecosystems.

Wood represents the most abundant biomass produced by plants and one of its major components is acetyl xylan. Acetylation in xylan can occur at O-2 or O-3 of a xylosyl residue, at both O-2 and O-3 of a xylosyl residue, and at O-3 of a xylosyl residue substituted at O-2 with glucuronic acid. Acetyltransferases responsible for the regiospecific acetylation of xylan in tree species have not yet been characterized. Here we report the biochemical characterization of twelve Populus trichocarpa DUF231-containing proteins, named PtrXOATs, for their roles in the regiospecific acetylation of xylan. The PtrXOAT genes were found to be differentially expressed in Populus organs and among them, PtrXOAT1, PtrXOAT2, PtrXOAT9 and PtrXOAT10 exhibited the highest level of expression in stems undergoing wood formation. Activity assays of recombinant proteins demonstrated that all twelve PtrXOAT proteins were able to transfer acetyl groups from acetyl CoA onto a xylohexaose acceptor with PtrXOAT1, PtrXOAT2, PtrXOAT3, PtrXOAT11 and PtrXOAT12 having the highest activity. Structural analysis of the PtrXOAT-catalyzed reaction products using 1H NMR spectroscopy revealed that PtrXOAT1, PtrXAOT2 and PtrXOAT3 mediated 2-O- and 3-O-monoacetylation and 2,3-di-O-acetylation of xylosyl residues and PtrXOAT11 and PtrXOAT12 only catalyzed 2-O- and 3-O-monoacetylation of xylosyl residues. Of the twelve PtrXOATs, only PtrXOAT9 and PtrXOAT10 were capable of transferring acetyl groups onto the O-3 position of 2-O-glucuronic acid-substituted xylosyl residues. Furthermore, when expressed in the Arabidopsis eskimo1 mutant, PtrXOAT1, PtrXAOT2 and PtrXOAT3 were able to rescue the defects in xylan acetylation. Together, these results demonstrate that the twelve PtrXOATs are acetyltransferases with different roles in xylan acetylation in P. trichocarpa.

The reasons why the range size of closely related species often varies significantly have intrigued scientists for many years. Among other hypotheses, species with high trait variation were suggested to occupy more diverse environments, have more continuity in their distributions, and consequently have larger range sizes. Here, using 34 tree species of lowlands tropical rainforest in southern Costa Rica, we explored whether inherent trait variability expressed at the local scale in functional traits is related to the species' total geographical range size. We formed 17 congeneric pairs of one narrow endemic and one widespread species, sampled 335 individuals and measured eight functional traits: leaf area, leaf thickness, leaf dry matter content, specific leaf area, leaf nitrogen content, leaf phosphorus content, leaf nitrogen to phosphorus ratio, and wood specific gravity. We tested whether there are significant differences in the locally expressed variation of individual traits or in multidimensional trait variance between the species in congeneric pairs and whether species' range size could hence be predicted from local trait variability. However, we could not find such differences between widely distributed and narrow range species. We discuss the possible reasons for these findings including the fact that higher trait variability of widespread species may result from successive local adaptations during range expansion and may hence often be an effect rather than the cause of larger ranges.

LiDAR technology has firmly contributed to strengthen the knowledge of habitat structure-wildlife relationships, though there is an evident bias towards flying vertebrates. To bridge this gap, we investigated and compared the performance of LiDAR and field data to model habitat preferences of wood mouse (Apodemus sylvaticus) in a Mediterranean high mountain pine forest (Pinus sylvestris). We recorded nine field and 13 LiDAR variables that were summarized by means of Principal Component Analyses (PCA). We then analyzed wood mouse's habitat preferences using three different models based on: (i) field PCs predictors, (ii) LiDAR PCs predictors; and (iii) both set of predictors in a combined model, including a variance partitioning analysis. Elevation was also included as a predictor in the three models. Our results indicate that LiDAR derived variables were better predictors than field-based variables. The model combining both data sets slightly improved the predictive power of the model. Field derived variables indicated that wood mouse was positively influenced by the gradient of increasing shrub cover and negatively affected by elevation. Regarding LiDAR data, two LiDAR PCs, i.e. gradients in canopy openness and complexity in forest vertical structure positively influenced wood mouse, although elevation interacted negatively with the complexity in vertical structure, indicating wood mouse's preferences for plots with lower elevations but with complex forest vertical structure. The combined model was similar to the LiDAR-based model and included the gradient of shrub cover measured in the field. Variance partitioning showed that LiDAR-based variables, together with elevation, were the most important predictors and that part of the variation explained by shrub cover was shared. LiDAR derived variables were good surrogates of environmental characteristics explaining habitat preferences by the wood mouse. Our LiDAR metrics represented structural features of the forest patch, such as the presence and cover of shrubs, as well as other characteristics likely including time since perturbation, food availability and predation risk. Our results suggest that LiDAR is a promising technology for further exploring habitat preferences by small mammal communities.

Heartwood and sapwood of Quercus faginea were evaluated in relation to summative chemical composition and non-polar and polar extracts composition, including an assessment of antioxidant properties (DPPH and FRAP). Twenty trees from two sites in Portugal were analysed. Heartwood had approximately two times more solvent extractible compounds than sapwood (on average 19.0% and 9.5%). The lipophilic extractible compounds were below 1%, and most of them were polar e.g. ethanol-soluble compounds corresponded to 65% of total extractives in heartwood and 43% in sapwood. Lignin content was similar in sapwood and heartwood (28.1% and 28.6% of extractive-free wood respectively) as well as the sugar composition. Site did not influence the chemical composition. The lipophilic extractible compounds from both sapwood and heartwood included mainly saturated fatty acids (23.0% and 36.9% respectively) and aromatic compounds were also abundant in sapwood (22.9%). The ethanol-water extractibles had a high content of phenolic substances (558.0 and 319.4 mg GAE/g extract, respectively of heartwood and sapwood). The polyphenolic composition was similar in heartwood and sapwood with higher content of ellagitannins (168.9 and 153.5 mg tannic acid/g of extract in sapwood and heartwood respectively) and very low content of condensed tannins. The antioxidant activity was very high with IC50 of 2.6 μg/ml and 3.3 μg/ml for sapwood and heartwood respectively, as compared to standard antioxidants (IC50 of 3.8 μg/ml for Trolox). The ferric reducing ability was 2.8 and 2.0 mMol Trolox equivalents/g extract of heartwood and sapwood respectively. The variability between trees was low and no differences between the two sites were found. Q. faginea showed a very good potential for cooperage and other applications for which a source of compounds with antioxidant properties is desirable.

Diameter at breast height (DBH), wood density (DEN) and predicted modulus of elasticity (PME) are considered as 'key traits' (KT) in the improvement in radiata pine breeding programmes in New Zealand. Any other traits which are also of interest to radiata pine breeders and forest growers are called 'non-key traits' (NKTs). External resin bleeding (ERB), internal checking (IC), number of heartwood rings (NHR) are three such non-key traits which affect wood quality of radiata pine timber. Economic importance of the KTs and NKTs is hard to define in radiata pine breeding programmes due to long rotation period. Desired-gain index (DGIs) and robust selection were proposed to incorporate NKTs into radiata pine breeding programme in order to deal with the uncertainty of economic importance. Four desired-gain indices A-D were proposed in this study. The desired-gain index A (DGI-A) emphasized growth and led to small decrease in ERB and small increase in IC and NHR. The expected genetic gains of all traits in the desired-gain index B (DGI-B) were in the favourable directions (positive genetic gains in the key traits and negative genetic gains in the non-key traits). The desired-gain index C (DGI-C) placed emphasis on wood density, leading to favourable genetic gain in the NKTs but reduced genetic gains for DBH and PME. The desired-gain index D (DGI-D) exerted a bit more emphasis on the non-key traits, leading large favourable reduction in the non-key traits and lower increase in the key traits compared with the other DGIs. When selecting both the key traits and the non-key traits, the average EBVs of six traits were all in the same directions as the expected genetic gains except for DBH in the DGI-D. When the key traits were measured and selected, internal checking always had a negative (favourable) genetic gain but ERB and NHR had unfavourable genetic gain in the most of time. After removing some individuals with high sensitivity to the change of economic weights, robust desired-gain selection made genetic gains of all the key and non-key traits to move a little bit toward unfavourable directions in the four indices. It is concluded that desired-gain index combined with robust selection concept is an efficient way for selecting the key and non-key traits in radiata pine breeding programmes.

Functional traits, properties of organisms correlated with ecological performance, play a central role in plant community assembly and functioning. To some extents, functional traits vary in concert, reflecting fundamental ecological strategies. While "trait syndromes" characteristic of e.g. fast-growing, early-successional vs. competitive, late-successional species are recognized in principle, less is known about the environmental and genetic factors at the source of trait variation and covariation within plant communities. We studied the three leaf traits leaf half-life (LHL), leaf mass per area (LMA) and nitrogen concentration in green leaves (Ngreen) and the wood trait wood density (WD) in 294 individuals belonging to 45 tree or shrub species in a Chinese subtropical forest from September 2006 to January 2009. Using multilevel ANOVA and decomposition of sums of products, we estimated the amount of trait variation and covariation among species (mainly genetic causes), i.e. plant functional type (deciduous vs. evergreen species), growth form (tree vs. shrub species), family/genus/species differences, and within species (mainly environmental causes), i.e. individual and season. For single traits, the variation between functional types and among species within functional types was large, but only LMA and Ngreen varied significantly among families and thus showed phylogenetic signal. Trait variation among individuals within species was small, but large temporal variation due to seasonal effects was found within individuals. We did not find any trait variation related to soil conditions underneath the measured individuals. For pairs of traits, variation between functional types and among species within functional types was large, reflecting a strong evolutionary coordination of the traits, with LMA, LHL and WD being positively correlated among each other and negatively with Ngreen. This integration of traits was consistent with a putative stem-leaf economics spectrum ranging from deciduous species with thin, high-nitrogen leaves and low-density wood to evergreen species with thick, low-nitrogen leaves and dense wood and was not influenced by phylogenetic history. Trait coordination within species was weak, allowing individual trees to deviate from the interspecific trait coordination and thus respond flexibly to environmental heterogeneity. Our findings suggest that within a single woody plant community variation and covariation in functional traits allows a large number of species to co-exist and cover a broad spectrum of multivariate niche space, which in turn may increase total resource extraction by the community and community functioning.

Residential wood combustion is the main source of elevated concentrations of fine particulate matter (PM2.5) during winter in many towns of Tasmania, Australia. A commercially available firebox catalyst in Australia has previously been shown to reduce visible smoke emissions and the manufacturer reports reductions in particle emissions generated from individual wood heaters in laboratory settings. This study aimed to evaluate the potential for community-wide distribution of the catalyst to improve the ambient winter air quality in the field. The study was set in four rural towns in northern Tasmania with similar topography, population size, and proportion of houses using wood heaters for space heating. Hourly PM2.5 concentrations and meteorological conditions were monitored in all locations by fixed stations from May-September, 2013 and 2014. In June 2014, residents of one town, Perth, were offered a free catalyst for placement in their fireboxes. A general linear model evaluated the impact of the intervention using an indicator variable adjusted for hourly conditions of weather. Almost 80% of wood heater owners in Perth accepted a catalytic device. However, no significant changes in ambient PM2.5 concentrations were associated with the catalyst trial. Future community-level research should address maintenance of the catalyst in the firebox, and the adequacy of conditions that facilitate catalysed combustion in individual heaters., Competing Interests: The authors have declared that no competing interests exist.

The North American wood decking market mostly relies on easily treatable Southern yellow pine (SYP), which is being impregnated with micronized copper (MC) wood preservatives since 2006. These formulations are composed of copper (Cu) carbonate particles (CuCO3·Cu(OH)2), with sizes ranging from 1 nm to 250 μm, according to manufacturers. MC-treated SYP wood is protected against decay by solubilized Cu2+ ions and unreacted CuCO3·Cu(OH)2 particles that successively release Cu2+ ions (reservoir effect). The wood species used for the European wood decking market differ from the North American SYP. One of the most common species is Norway spruce wood, which is poorly treatable i.e. refractory due to the anatomical properties, like pore size and structure, and chemical composition, like pit membrane components or presence of wood extractives. Therefore, MC formulations may not suitable for refractory wood species common in the European market, despite their good performance in SYP. We evaluated the penetration effectiveness of MC azole (MCA) in easily treatable Scots pine and in refractory Norway spruce wood. We assessed the effectiveness against the Cu-tolerant wood-destroying fungus Rhodonia placenta. Our findings show that MCA cannot easily penetrate refractory wood species and could not confirm the presence of a reservoir effect., Competing Interests: The authors have declared that no competing interests exist.

Stumps account for a large proportion of coarse woody debris in managed forests, but their decay dynamics are poorly understood. The loss of mass and the degree of humification of the above-ground woody debris, below-ground woody debris, bark and root system (R1, 10 mm ≥ diameter > 0 mm; R2, 25 mm ≥ diameter >10 mm; 100 mm ≥ R3 > 25 mm; R4 > 100 mm) of Masson pine (Pinus massoniana) stump systems were evaluated in southwestern China in a chronosequence of plantations cut 1-15 years prior to the study. The results indicated that above-ground woody debris decomposed more quickly than below-ground woody debris and bark, whereas the degree of humification followed the opposite trend. Compared with one-year stumps, the mass losses of 15-year stump systems were 60.4% for above-ground woody debris, 42.1% for below-ground woody debris, 47.3% for bark, 69.9% for R1, 47.3% for R2, 51.0% for R3, and 83.2% for R4. In contrast, below-ground woody debris showed a greater degree of humification compared with other components in the stump system. Among the root system, fine roots (R1, diameter ≤ 10 mm) had the largest k value (0.09), whereas the decay rate of coarser roots (R2, R3, R4; diameter > 10 mm) increased with increasing root diameter. However, coarse roots showed a larger degree of humification (0.2-0.6) than fine roots (0.3-0.4). These results suggest that below-ground woody debris and coarse roots may display a higher degree of humification, showing greater short-term contributions to overall humification when compared with the other components in the stump system.

500 years of ancient Near Eastern history from the earlier second millennium BCE, including such pivotal figures as Hammurabi of Babylon, Šamši-Adad I (who conquered Aššur) and Zimrilim of Mari, has long floated in calendar time subject to rival chronological schemes up to 150+ years apart. Texts preserved on clay tablets provide much information, including some astronomical references, but despite 100+ years of scholarly effort, chronological resolution has proved impossible. Documents linked with specific Assyrian officials and rulers have been found and associated with archaeological wood samples at Kültepe and Acemhöyük in Turkey, and offer the potential to resolve this long-running problem. Here we show that previous work using tree-ring dating to place these timbers in absolute time has fundamental problems with key dendrochronological crossdates due to small sample numbers in overlapping years and insufficient critical assessment. To address, we have integrated secure dendrochronological sequences directly with radiocarbon (14C) measurements to achieve tightly resolved absolute (calendar) chronological associations and identify the secure links of this tree-ring chronology with the archaeological-historical evidence. The revised tree-ring-sequenced 14C time-series for Kültepe and Acemhöyük is compatible only with the so-called Middle Chronology and not with the rival High, Low or New Chronologies. This finding provides a robust resolution to a century of uncertainty in Mesopotamian chronology and scholarship, and a secure basis for construction of a coherent timeframe and history across the Near East and East Mediterranean in the earlier second millennium BCE. Our re-dating also affects an unusual tree-ring growth anomaly in wood from Porsuk, Turkey, previously tentatively associated with the Minoan eruption of the Santorini volcano. This tree-ring growth anomaly is now directly dated ~1681-1673 BCE (68.2% highest posterior density range), ~20 years earlier than previous assessments, indicating that it likely has no association with the subsequent Santorini volcanic eruption.

Allometric regression models are widely used to estimate tropical forest biomass, but balancing model accuracy with efficiency of implementation remains a major challenge. In addition, while numerous models exist for aboveground mass, very few exist for roots. We developed allometric equations for aboveground biomass (AGB) and root biomass (RB) based on 300 (of 45 species) and 40 (of 25 species) sample trees respectively, in an evergreen forest in Vietnam. The biomass estimations from these local models were compared to regional and pan-tropical models. For AGB we also compared local models that distinguish functional types to an aggregated model, to assess the degree of specificity needed in local models. Besides diameter at breast height (DBH) and tree height (H), wood density (WD) was found to be an important parameter in AGB models. Existing pan-tropical models resulted in up to 27% higher estimates of AGB, and overestimated RB by nearly 150%, indicating the greater accuracy of local models at the plot level. Our functional group aggregated local model which combined data for all species, was as accurate in estimating AGB as functional type specific models, indicating that a local aggregated model is the best choice for predicting plot level AGB in tropical forests. Finally our study presents the first allometric biomass models for aboveground and root biomass in forests in Vietnam.

Flame Curtain Biochar Kilns: Pyrolysis of organic waste or woody materials yields charcoal, a stable carbonaceous product that can be used for cooking or mixed into soil, in the latter case often termed "biochar". Traditional kiln technologies for charcoal production are slow and without treatment of the pyrolysis gases, resulting in emissions of gases (mainly methane and carbon monoxide) and aerosols that are both toxic and contribute to greenhouse gas emissions. In retort kilns pyrolysis gases are led back to a combustion chamber. This can reduce emissions substantially, but is costly and consumes a considerable amount of valuable ignition material such as wood during start-up. To overcome these problems, a novel type of technology, the Kon-Tiki flame curtain pyrolysis, is proposed. This technology combines the simplicity of the traditional kiln with the combustion of pyrolysis gases in the flame curtain (similar to retort kilns), also avoiding use of external fuel for start-up., Biochar Characteristics: A field study in Nepal using various feedstocks showed char yields of 22 ± 5% on a dry weight basis and 40 ± 11% on a C basis. Biochars with high C contents (76 ± 9%; n = 57), average surface areas (11 to 215 m(2) g(-1)), low EPA16-PAHs (2.3 to 6.6 mg kg(-1)) and high CECs (43 to 217 cmolc/kg)(average for all feedstocks, mainly woody shrubs) were obtained, in compliance with the European Biochar Certificate (EBC)., Gas Emission Factors: Mean emission factors for the flame curtain kilns were (g kg(-1) biochar for all feedstocks); CO2 = 4300 ± 1700, CO = 54 ± 35, non-methane volatile organic compounds (NMVOC) = 6 ± 3, CH4 = 30 ± 60, aerosols (PM10) = 11 ± 15, total products of incomplete combustion (PIC) = 100 ± 83 and NOx = 0.4 ± 0.3. The flame curtain kilns emitted statistically significantly (p<0.05) lower amounts of CO, PIC and NOx than retort and traditional kilns, and higher amounts of CO2., Implications: With benefits such as high quality biochar, low emission, no need for start-up fuel, fast pyrolysis time and, importantly, easy and cheap construction and operation the flame curtain technology represent a promising possibility for sustainable rural biochar production.

The objective of this work was to optimize a soilless growing system for producing bare-root strawberry transplants in three organic substrates. Three trials were conducted in the Quebec City area to determine the productivity potential of a peat-sawdust mixture (PS25) and an aged bark (AB) material compared to conventional coconut fiber (CF) substrate. A first experiment was carried out to define appropriate irrigation set points for each substrate that allowed optimal plant growth and fruit yields. For all substrates, wetter conditions (irrigation started at -1.0 kPa for CF; -1.5 kPa for AB and PS25, relative to -1.5 kPa for CF; -2.5 kPa for AB and PS25) enhanced plant growth and fruit production. The second trial was carried out to test the productivity potential for commercial production of the three substrates using high-tunnels. After the addition of an initial fertilizer application to PS25, we successfully established bare-root plants that gave similar fruit yields than those in CF and AB. The productivity potential of PS25 and AB were further confirmed during a third trial under greenhouse conditions. The critical factor for plant establishment in PS25 was attributed to consistent N, P and S immobilization by microorganisms, as well as the retention of other elements (Mg2+, K+) in the growth media. Taken together, our results showed that PS25 and AB are promising alternative substrates to coconut coir dust for strawberry cultivation. This paper also provides a useful guide for strawberry cultivation in Quebec, and suggests future research that might be conducted to optimize soilless systems for cold-climate strawberry production in Northern America.