Search

Introduction: One major challenge in PET radiomics is its sensitivity to noise. Low signal-to-noise ratio (SNR) affects not only the precision but also the accuracy of quantitative metrics extracted from the images resulting in noise-induced bias. This phantom study aims to identify the radiomic features that are robust to noise in terms of precision and accuracy and to explore some methods that might help to correct noise-induced bias., Methods: A phantom containing three 18F-FDG filled 3D printed inserts, reflecting heterogeneous tracer uptake and realistic tumor shapes, was used in the study. The three different phantom inserts were filled and scanned with three different tumor-to-background ratios, simulating a total of nine different tumors. From the 40-minute list-mode data, ten frames each for 5 s, 10 s, 30 s, and 120 s frame duration were reconstructed to generate images with different noise levels. Under these noise conditions, the precision and accuracy of the radiomic features were analyzed using intraclass correlation coefficient (ICC) and similarity distance metric (SDM) respectively. Based on the ICC and SDM values, the radiomic features were categorized into four groups: poor, moderate, good, and excellent precision and accuracy. A "difference image" created by subtracting two statistically equivalent replicate images was used to develop a model to correct the noise-induced bias. Several regression methods (e.g., linear, exponential, sigmoid, and power-law) were tested. The best fitting model was chosen based on Akaike information criteria., Results: Several radiomic features derived from low SNR images have high repeatability, with 68% of radiomic features having ICC ≥ 0.9 for images with a frame duration of 5 s. However, most features show a systematic bias that correlates with the increase in noise level. Out of 143 features with noise-induced bias, the SDM values were improved based on a regression model (53 features to excellent and 67 to good) indicating that the noise-induced bias of these features can be, at least partially, corrected., Conclusion: To have a predictive value, radiomic features should reflect tumor characteristics and be minimally affected by noise. The present study has shown that it is possible to correct for noise-induced bias, at least in a subset of the features, using a regression model based on the local image noise estimates., Competing Interests: The authors have declared that no competing interests exist.

Background: PET-based tumor delineation is an error prone and labor intensive part of image analysis. Especially for patients with advanced disease showing bulky tumor FDG load, segmentations are challenging. Reducing the amount of user-interaction in the segmentation might help to facilitate segmentation tasks especially when labeling bulky and complex tumors. Therefore, this study reports on segmentation workflows/strategies that may reduce the inter-observer variability for large tumors with complex shapes with different levels of user-interaction., Methods: Twenty PET images of bulky tumors were delineated independently by six observers using four strategies: (I) manual, (II) interactive threshold-based, (III) interactive threshold-based segmentation with the additional presentation of the PET-gradient image and (IV) the selection of the most reasonable result out of four established semi-automatic segmentation algorithms (Select-the-best approach). The segmentations were compared using Jaccard coefficients (JC) and percentage volume differences. To obtain a reference standard, a majority vote (MV) segmentation was calculated including all segmentations of experienced observers. Performed and MV segmentations were compared regarding positive predictive value (PPV), sensitivity (SE), and percentage volume differences., Results: The results show that with decreasing user-interaction the inter-observer variability decreases. JC values and percentage volume differences of Select-the-best and a workflow including gradient information were significantly better than the measurements of the other segmentation strategies (p-value<0.01). Interactive threshold-based and manual segmentations also result in significant lower and more variable PPV/SE values when compared with the MV segmentation., Conclusions: FDG PET segmentations of bulky tumors using strategies with lower user-interaction showed less inter-observer variability. None of the methods led to good results in all cases, but use of either the gradient or the Select-the-best workflow did outperform the other strategies tested and may be a good candidate for fast and reliable labeling of bulky and heterogeneous tumors., Competing Interests: The authors declared that no competing interests exist.

Purpose: The widely known field 'Radiomics' aims to provide an extensive image based phenotyping of e.g. tumors using a wide variety of feature values extracted from medical images. Therefore, it is of utmost importance that feature values calculated by different institutes follow the same feature definitions. For this purpose, the imaging biomarker standardization initiative (IBSI) provides detailed mathematical feature descriptions, as well as (mathematical) test phantoms and corresponding reference feature values. We present here an easy to use radiomic feature calculator, RaCaT, which provides the calculation of a large number of radiomic features for all kind of medical images which are in compliance with the standard., Methods: The calculator is implemented in C++ and comes as a standalone executable. Therefore, it can be easily integrated in any programming language, but can also be called from the command line. No programming skills are required to use the calculator. The software architecture is highly modularized so that it is easily extendible. The user can also download the source code, adapt it if needed and build the calculator from source. The calculated feature values are compliant with the ones provided by the IBSI standard. Source code, example files for the software configuration, and documentation can be found online on GitHub (https://github.com/ellipfaehlerUMCG/RaCat)., Results: The comparison with the standard values shows that all calculated features as well as image preprocessing steps, comply with the IBSI standard. The performance is also demonstrated on clinical examples., Conclusions: The authors successfully implemented an easy to use Radiomics calculator that can be called from any programming language or from the command line. Image preprocessing and feature settings and calculations can be adjusted by the user., Competing Interests: The authors have declared that no competing interests exist.