Search

Conventional power systems are almost at the verge of their existence and are quickly being replaced by modern, especially smarter alternatives. Rapid and wide deployment of Load side management, which is a smarter and modern way to ensure efficient and economical use of power, is a classic example. However, there are several challenges which need to be addressed before it can be realized as a commercially viable solution. Suitable communication method, called "Home Area Networks", is a mandatory requirement which should be cost effective, robust and with ability to simultaneously handle large number of devices. Due to various inherent issues, communication protocols commonly used now-a-days, are not fully capable to address the requirements of HANs. Power Line Carrier Communications (PLCC) can be a suitable and efficient alternative of quick realization of HANs. In this paper, various aspects of PLCC have been analyzed for use in HANs. Modulation methods, materials, physical parameters and effect of noise have been analyzed. The paper evaluates performance and effectiveness of FSK modulation with aluminum transmission medium for PLC within a residential environment, focusing on the tradeoffs between distance, transmission medium diameter, and type of transmission medium, and cable gauge, which can degrade the performance of PLCC. A novel simulation model has been presented incorporating RLCG (Resistance, Inductance, Capacitance, and Conductance) tools and additive white Gaussian noise (AWGN). Performance parameter have been comprehensively analyzed of implementation using aluminum as a communication medium. This paper discusses cost effectiveness of PLCC by replacing copper by aluminum as the transmission medium. The study reveals that aluminum cables must be twice the size of copper cable in order to achieve same communication distances. Higher carrier frequencies in FSK modulation increase noise susceptibility, consequently reducing achievable communication distances. Cables with smaller diameters results in lower transmission ranges. These results highlight the trade-offs involved in implementing FSK for in-home PLCC (iPLCC). The study highlights how crucial it is to take these trade-offs into account while developing and refining FSK-based iPLCC systems for use in smart homes., Competing Interests: he authors have declared that no competing interests exist., (Copyright: © 2024 Ashraf et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Solar photovoltaic (PV) cell modeling is crucial to understanding and optimizing solar energy systems. While the single-diode model (PVSDM) is commonly used, the double-diode model (PVDDM) offers improved accuracy at a reasonable level of complexity. However, finding analytical closed-form solutions for the current-voltage (I-U) dependency in PVDDM circuits has remained a challenge. This work proposes two novel configurations of PVDDM equivalent circuits and derives their analytical closed-form solutions. The solutions are expressed in terms of the Lambert W function and solved using a special transcendental function approach called Special Trans Function Theory (STFT). The accuracy of the proposed equivalent circuits is demonstrated on two solar cells/modules, RTC-F and MSX-60, showing equal or better performance than the standard PVDDM equivalent circuit. Further testing on a commercial solar panel under different irradiance and temperature conditions confirms the applicability of the proposed models. To address the parameter estimation problem, a novel metaheuristic algorithm, the chaotic honey-badger algorithm, is developed and evaluated. The results obtained validate the accuracy and practicality of the proposed PVDDM equivalent circuit configurations., Competing Interests: NO authors have competing interests., (Copyright: © 2024 Ali et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Demand response-based load scheduling in smart power grids is currently one of the most important topics in energy optimization. There are several benefits to utility companies and their customers from this strategy. The main goal of this work is to employ a load scheduling controller (LSC) to model and solve the scheduling issue for household appliances. The LSC offers a solution to the primary problems faced during implementing demand response. The goal is to minimize peak-to-average demand ratios (PADR) and electricity bills while preserving customer satisfaction. Time-varying pricing, intermittent renewable energy, domestic appliance energy demand, storage battery, and grid constraints are all incorporated into the model. The optimal adaptive wind-driven optimization (OAWDO) method is a stochastic optimization technique designed to manage supply, demand, and power price uncertainties. LSC creates the ideal schedule for home appliance running periods using the OAWDO algorithm. This guarantees that every appliance runs as economically as possible on its own. Most appliances run the risk of functioning during low-price hours if just the real time-varying price system is used, which could result in rebound peaks. We combine an inclined block tariff with a real-time-varying price to alleviate this problem. MATLAB is used to do a load scheduling simulation for home appliances based on the OAWDO algorithm. By contrasting it with other algorithms, including the genetic algorithm (GA), the whale optimization algorithm (WOA), the fire-fly optimization algorithm (FFOA), and the wind-driven optimization (WDO) algorithms, the effectiveness of the OAWDO technique is supported. Results indicate that OAWDO works better than current algorithms in terms of reducing power costs, PADR, and rebound peak formation without sacrificing user comfort., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Alghamdi et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

With the rapid development of distributed generation (DG) within the framework of modern power systems, accurately assessing the maximum DG hosting capacity in distribution networks is crucial for ensuring the safe and stable operation of the power grid. This paper first introduces an assessment model of maximum DG hosting capacity in distribution network based on optimal power flow (OPF). Then, a two-step method that combines the linearization method and the recursive method is proposed, which consists of two parts: firstly, using linearization method to quickly calculate the preliminary assessment value of maximum DG hosting capacity, and then using a recursive method to accurately correct the preliminary assessment value. Additionally, the proposed improved comprehensive sensitivity index and safety constraint verification method can enhance the computational efficiency and accuracy of the recursive algorithm. Finally, the proposed methods were simulated and validated on the IEEE 33-bus system., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Wan et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Solar panel installation is generally exposed to dust. Therefore, soiling on the surface of the solar panels significantly reduces the effectiveness of solar panels. Accumulation of dust also shortens their lifespan and reduces efficiency by about 15% to 20%. A significant reduction in the efficiency of solar photovoltaic panels has been observed due to inadequate insulation and dust deposition or shading. To harness maximum solar energy from solar panels up to their rated capacity, they need to be cleaned periodically. Therefore, the current study focuses on the comparative performance analysis of two distinct types of self-cleaning mechanisms, namely self-cleaning wiper (SCW) and nano-coating method. These methods are economical and sustainable for the standard atmospheric conditions of Pakistan. Solar panels (reference, nano-coated, and self-cleaning wiper mechanism) were placed on the roof of the Mechanical Engineering Department MUST Mirpur AJK for five weeks. Solar irradiance, dust density & performance parameters of these three panels were recorded on weekly basis. It was observed that an increase in the rate of dust deposition negatively affects the conversion efficiency of solar panels. When dust density was increased from 7.5 to 18.15 (g/m2), the percentile drops in rated power (50W) for reference, nano-coated, and self-cleaning wiper mechanisms are 37%, 33% and 23%, respectively. Moreover, the payback period of nano-coated and SCW is 1.07 years and 2.79 years, respectively., Competing Interests: NO authors have competing interests, (Copyright: © 2024 Hameed et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The future trend in global automobile development is electrification, and the current collector is an essential component of the battery in new energy vehicles. Aiming at the misjudgment and omission caused by the confusing distribution, a wide range of sizes and types, and ambiguity of target defects in current collectors, an improved target detection model DCS-YOLO (DC-SoftCBAM YOLO) based on YOLOv5 is proposed. Firstly, the detection rate of defects with different scales is improved by adding detection layers; Secondly, we use the designed DC module as the backbone network to help the model capture the global information and semantic dependencies of the target, and effectively improve the generalization ability and detection performance of the model. Finally, in the neck part, we integrate our designed Convolutional Block Attention Module (SoftPool Convolutional Block Attention Module, SoftCBAM), which can adaptively learn the importance of channels, enhance feature representation, and enable the model to better deal with target details. Experimental results show that the mAP50 of the proposed DCS-YOLO model is 92.2%, which is 5.1% higher than the baseline model. The FPS reaches 147.1, and the detection accuracy of various defect categories is improved, especially Severely bad and No cover, and the detection recall rate reaches 100%. This method has high target detection model efficiency and meets the requirements of real-time detection of battery collector defects., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Tang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Wind power forecasting has complex nonlinear features and behavioral patterns across time scales, which is a severe test for traditional forecasting techniques. To address the multi-scale problem in wind power forecasting, this paper innovatively proposes an ultra-short-term forecasting model LFformer based on Legendre-Fourier, which firstly focuses on the important information in the input sequences by using the encoder-decoder architecture, and then scales the range of the original data with the Devlin normalization method, and then utilizes the Legendre polynomials to The data sequence is projected into a bounded dimensional space, the historical data is compressed using feature representation, then feature selection is performed using the low-rank approximation method of Fourier Transform, the prediction is inputted into the multilayer perceptron through the multi-scale mixing mechanism, and finally the results are outputted after back-normalization. The experimental results show that compared with the existing prediction methods, the model realizes the improvement of prediction accuracy and stability, especially in the ultra-short-term prediction scenario, with obvious advantages. The research results are not only valuable for improving the overall operational efficiency of the wind power system, but also help to enhance the stable operation of the power grid, which provides strong technical support and guarantee for wind power enterprises to improve the competitiveness of bidding for Internet access in the power market competition., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Ma et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Egypt faces extreme traffic congestion in its cities, which results in long travel times, large lines of parked cars, and increased safety hazards. Our study suggests a multi-modal approach that combines critical infrastructure improvements with cutting-edge technologies to address the ubiquitous problem of traffic congestion. Assuring vehicles owners of their timely arrival, cutting down on fuel usage, and improving communication using deep learning approach and optimization algorithm within the potential of IoT enabled 5G framework are the main goals. The traffic management system incorporates detection cameras, Raspberry Pi 3 microcontroller, an Android application, cloud connectivity, and traditional traffic lights that are powered using PV modules and batteries to secure the traffic controllers operation in case of grid outage and assure service continuity. The model examines the difficulties associated with Internet of Things (IoT) communication, highlighting possible interference from device-to-device (D2D) devices and cellular user equipment. This all-encompassing strategy aims to reduce fuel consumption, increase road safety and improve traffic efficiency. The model predicts a significant increase in Egypt's urban mobility by utilizing the possibilities of IoT and 5G technologies, which would improve Egypt's towns' livability and efficiency. The goal of this paper is to modernize Egypt's traffic management system and bring it into compliance with global guidelines for intelligent transportation networks., Competing Interests: There is no conflict of interest., (Copyright: © 2024 Ahmed et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

With the increasing demand for electricity load in China, orderly power utilization are important measures to alleviate electricity shortages during peak periods. This article establishes a multi-objective optimization model for orderly power utilization in active distribution networks is established, with the optimization objectives of minimizing the total operation cost, minimizing the cost for users, and minimizing the load fluctuation of the system. This model contains a large number of integer variables and nonlinear constraints, which is difficult to solve. To reduce computation time, convex relaxation techniques are adopted to transform the original model into a mixed-integer second-order cone programming (MISOCP) model, which has lower computational complexity. Furthermore, The improved ε-constraint method is proposed to solve the model, which can directly and quickly find the compromise optimal solution of the multi-objective problem. By using simplex search algorithm, the proposed method dose not need to traverse all grid points, which can significantly reduce computation time. Finally, case study on the the IEEE-33 bus distribution network demonstrate the effectiveness of the proposed method., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Wen et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The protection system is crucial for grid stability and safeguarding essential components, including generators, transformers, transmission systems, and power connections. The smart grid system increases the flexibility and complexity of the power system, making fault detection and isolation the primary challenges for the protection system. This paper presents an optimal protection solution using an adaptive electronic relay to enhance reliability and enable self-healing. The proposed protection algorithm quickly detects faults and automatically isolates them from the rest of the healthy system in 25ms. The relay operation algorithm has been validated using MATLAB SIMULINK software. The results confirm the effectiveness of the proposed smart electronic relay in various sections of the smart grid system, including transformers, transmission and distribution., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Nasrallah et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Power transformers are essential elements in power systems and thus their protection schemes have critical importance. In this paper, a scheme is proposed for accurate discrimination and location of internal faults in power transformers using conventional measuring devices attached to the transformer. Different types of internal winding faults are intensely considered: partial discharge, inter-disk faults, series and shunt short circuit faults and axial displacement. Depending on the transformer measured output voltage, input voltage and the input current, the construction of a locus diagram (ΔV-Iin) serves as an indicator for any physical modification to the winding. Using five suggested features extracted from the developed locus, an artificial neural network (ANN) technique is applied to accurately distinguish any deviation from the transformer healthy condition. The exact location of each fault inside the windings of power transformer is then determined. The obtained results validate the usefulness of the proposed scheme for different internal faults. The superiority of the proposed scheme is extensively examined by comparing its results with some published schemes., Competing Interests: NO authors have competing interests., (Copyright: © 2024 Youssef et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Diesel engines (DEs) commonly power pumps used in agricultural and grassland irrigation. However, relying on unpredictable and costly fuel sources for DEs pose's challenges related to availability, reliability, maintenance, and lifespan. Addressing these environmental concerns, this study introduces an emulation approach for photovoltaic (PV) water pumping (WP) systems. Emulation offers a promising alternative due to financial constraints, spatial limitations, and climate dependency in full-scale systems. The proposed setup includes three key elements: a PV system emulator employing back converter control to replicate PV panel characteristics, a boost converter with an MPPT algorithm for efficient power tracking across diverse conditions, and a motor pump (MP) emulator integrating an induction motor connected to a DC generator to simulate water pump behaviors. Precise induction motor control is achieved through a controlled inverter. This work innovatively combines PV and WP emulation while optimizing system dynamics, aiming to develop a comprehensive emulator and evaluate an enhanced control algorithm. An optimized scalar control strategy regulates the water MP, demonstrated through MATLAB/Simulink simulations that highlight superior performance and responsiveness to solar irradiation variations compared to conventional MPPT techniques. Experimental validation using the dSPACE control desk DS1104 confirms the emulator's ability to faithfully reproduce genuine solar panel characteristics., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Fatah et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This study aims to improve the helicopter electric power inspection process by using the feature embedding convolution (FEC) model to solve the problems of small scope and poor real-time inspection. First, simulation experiments and model analysis determine the keyframe and flight trajectory. Second, an improved FEC model is proposed, extracting features from aerial images in large ranges in real time and accurately identifying and classifying electric power inspection targets. In the simulation experiment, the accuracy of the model in electric power circuit and equipment detection is improved by 30% compared with the traditional algorithm, and the inspection range is expanded by 26%. In addition, this study further optimizes the model with reinforcement learning technology, conducts a comparative analysis of different flight environments and facilities, and reveals the diversity and complexity of inspection objectives. The performance of the optimized model in fault detection is increased by more than 36%. In conclusion, the proposed model improves the accuracy and scope of inspection, provides a more scientific strategy for electric power inspection, and ensures inspection efficiency., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Liu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

At present, renewable energy sources (RESs) and electric vehicles (EVs) are presented as viable solutions to reduce operation costs and lessen the negative environmental effects of microgrids (μGs). Thus, the rising demand for EV charging and storage systems coupled with the growing penetration of various RESs has generated new obstacles to the efficient operation and administration of these μGs. In this regard, this paper introduces a multi-objective optimization model for minimizing the total operation cost of the μG and its emissions, considering the effect of battery storage system (BSS) and EV charging station load. A day-ahead scheduling model is proposed for optimal energy management (EM) of the μG investigated, which comprises photovoltaics (PVs), fuel cells (FCs), wind turbines (WTs), BSSs, and EV charging stations, with shed light on the viability and benefits of connecting BSS with EV charging stations in the μG. Analyzing three case studies depending on the objective function-Case 1: execute EM to minimize total operation cost and maximize the profits of BSS, Case 2: execute EM to minimize total emission from the μG, and Case 3: execute EM to minimize total operation cost, maximize the profits of BSS, and minimize total emissions from the μG. The main aim of the presented optimization strategy is to achieve the best possible balance between reducing expenses and lessening the environmental impact of greenhouse gas emissions. The krill herd algorithm (KHA) is used to find the optimal solutions while considering various nonlinear constraints. To demonstrate the validity and effectiveness of the proposed solution, the study utilizes the KHA and compares the obtained results with those achieved by other optimization methods. It was demonstrated that such integration significantly enhances the μG's operational efficiency, reduces operating costs, and minimizes environmental impact. The findings underscore the viability of combining EV charging infrastructure with renewable energy to meet the increasing energy demand sustainably. The novelty of this work lies in its multi-objective optimization approach, the integration of EV charging and BSS in μGs, the comparison with other optimization methods, and the emphasis on sustainability and addressing energy demand through the utilization of renewable energy and EVs., Competing Interests: The authors have no relevant financial or non-financial interests to disclose. The authors have no competing interests to declare that are relevant to the content of this article., (Copyright: © 2024 Aldosari et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The new energy system constructed by energy storage and photovoltaic power generation system can effectively solve the problem of transformer overload operation in some enterprises. It can not only reduce the cost of electricity, but also realize low-carbon emission reduction. However, due to its low return on investment, the willingness of enterprises to install new energy is not high. In this paper, we first establish a load forecasting model to users whose transformers are overloaded or about to be overloaded, which are potential customers with new energy installation needs. Then, Optimal configuration models of PV and energy storage systems based on nonlinear programming are developed for these potential customers. The optimal installed capacity of the PV energy storage and the optimal charging and discharging strategy for the energy storage system can be obtained. This optimization strategy ensures that the electricity consumption of the enterprise does not exceed the rated capacity, and effectively reduces the enterprise's basic tariff and electricity price to achieve cost reduction and efficiency. Finally, taking a building materials production factory as an example, we obtain the optimal plan for the new energy capacity, as well as the economic benefits of the plan and the specific strategy of energy storage charging and discharging for this factory., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Lv, Han. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The article presents an innovative approach for detecting defects in insulators used in high-voltage power transmission lines, employing an enhanced Detection Transformer (DETR) model, termed IF-DETR. The study addresses the significant challenges in traditional insulator defect detection methods, such as the loss of small defect features and confusion with background features. Firstly, we propose a multi-scale backbone network to better extract features of small objects. Secondly, as the contextual information surrounding objects plays a critical role in detecting small objects, we introduce a fusion module composed of ECA-Net and SAU to replace the original attention module for improved contextual information extraction. Lastly, we introduce the insulator defect (IDIoU) loss to optimize the instability in the matching process caused by small defects. Extensive experiments demonstrate the model's effectiveness, particularly in detecting small defects, marking a notable advancement in insulator defect detection technology. The IF-DETR achieved a 2.3% increase in AP compared to existing advanced methods. This method not only enhances the accuracy of defect detection, crucial for maintaining the reliability and safety of power transmission systems but also has broader implications for the maintenance and inspection of high-voltage power infrastructure., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Wang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

On the basis of predecessors' coordination optimization of active and reactive power in distribution network, For the necessity of the optimal operation in the distribution network, part of power generated from photovoltaic (PV) cannot be sold to users, and cannot enjoy subsidies. Similarly, the network loss in the power transmission will also bring a certain economic loss. This paper comprehensively considers the economic loss caused by the network loss and PV abandon of the distribution system, and establishes a model to minimize the economic loss. To solve this problem efficiently, the method of DistFlow equation and mixed integer second order cone programming (MISOCP) is used to solve the problem, in this method, the original mixed integer nonlinear programming non-convex problem is transformed into a convex problem, which makes the optimization problem easy to solve. The modified IEEE 33 and IEEE 69 distribution networks are tested by the above method. The optimized results are able to meet the target and have very small relaxation gaps, and the voltage level is also optimized. This coordinated optimization approach helps to optimize the economic operation for active distribution networks with PVs., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Peng, Wang. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This study investigates the impact of cooling methods on the electrical efficiency of photovoltaic panels (PVs). The efficiency of four cooling techniques is experimentally analyzed. The most effective approach is identified as water-spray cooling on the front surface of PVs, which increases efficiency by 3.9% compared to the case without cooling. The results show that water-spray cooling raises the PV's temperature to 41°C, while improving its average daytime efficiency to 22%. Air-cooling, water-cooling in the tubes behind the PV, and aluminum oxide-water nanofluid cooling in the tubes behind the PV improve efficiency by 1.1%, 1.9%, and 2.7%, respectively. The findings highlight the potential of water-spray cooling as a cost-effective and efficient method to enhance PV efficiency and contribute to the global effort towards renewable energy., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Basem et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

An EPS system is used to improve the stability and safety of the car when steering while also simplifying the steering process. This article introduces a novel control solution for the EPS system called BSSMCPID. This algorithm combines two nonlinear techniques, BS and SMC, with the input signal corrected by a PID technique. This algorithm provides three new contributions compared to existing algorithms: reducing system errors and eliminating phase differences, ensuring stability even when exposed to external disturbances, and reducing power consumption. The system's stability is evaluated according to the Lyapunov criterion, while the algorithm's performance is evaluated based on numerical simulation results. According to the article findings, the RMS error of the steering column angle and steering motor angle values (controlled objects) is approximately zero, and the RMS error of the steering column speed and steering motor speed is about 0.01 rad/s, which is much lower than the results obtained with traditional BS and PID controllers. When the EPS system is controlled by the integrated nonlinear method proposed in this work, the output values always closely follow the reference values with negligible errors under all investigated conditions. Additionally, power steering performance increases as speed decreases or driver torque increases, which follows the ideal assisted power steering curve. In general, the responsiveness and stability of the system are always ensured when applying this algorithm., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Tuan Anh Nguyen. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This study investigates the performance of dynamic capacitance regulation technology in electric vehicle piezoelectric shock absorbers for energy recovery under varying road conditions. By simulating a quarter-vehicle suspension system, this paper comprehensively analyzes the energy recovery efficiency of piezoelectric shock absorbers on gravel, speed bumps, and bumpy road conditions, comparing the performance differences between traditional fixed capacitance and dynamic capacitance. The results demonstrate that dynamic capacitance regulation technology can automatically adjust the capacitance value in response to instantaneous voltage changes, thereby enhancing energy recovery efficiency under various road conditions. This technology not only improves the energy conversion efficiency of piezoelectric shock absorbers but also strengthens the system's adaptability to different vibration frequencies and amplitudes. Further simulation evidence confirms that piezoelectric shock absorbers, under dynamic capacitance regulation, achieve better energy recovery performance across diverse road conditions, offering new insights into improving the energy efficiency and sustainability of electric vehicles. The novelty of this research lies in the first application of dynamic capacitance regulation technology to the energy recovery system of electric vehicle piezoelectric shock absorbers, providing a new theoretical foundation and technical reference for optimizing electric vehicle energy recovery systems., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Shih-Lin Lin. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This article presents the contribution of multicellular converters in improving of the quality of power produced in photovoltaic chain, with the aim of exploiting the maximum power produced by the photovoltaic generator with low oscillations around of the maximum power point (MPP) at steady state and to reduce switching losses. After modeling the multicellular parallel boost converter, fractional short circuit current (FSCC) MPPT was modified to get an estimated photocurrent as a reference to control the inductance current for good functioning of the converter in pursuit of the maximum power point. To verify the performance of the proposed solution, the system was submitted to irradiance and temperature variations. The simulations carried out in the Matlab/Simulink environment presented satisfactory results of the proposed solution, in comparison with the high-gain quadratic boost converter we have a response time of 0.04 s, power oscillations at maximum point around 0.05 W and efficiency of 99.08%; in comparison with the interleaved high-gain boost converter the results show a response time of 0.1 s for the transferred power, a very low output voltage ripples of 0.001% and 98.37% as efficiency of the chain. The proposed solution can be connected to a grid with a reduction of level of the inverter and active filter., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Byanpambé et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Purpose: Button battery nasal impactions pose serious risks due to complications and the need for prompt removal, yet research on interventions remains limited due to its rare occurrence. To delineate the clinical manifestations of nasal foreign bodies associated with button batteries and to explore treatment approaches focused on minimizing the reliance on general anesthesia and surgical interventions., Methods: This study focuses on 176 cases of children who received treatment for nasal cavity button battery impactions. It encompasses various factors including age, gender, battery location, impaction duration, methods of extraction, and associated complications., Results: The incidence of nasal button battery cases among nasal foreign body instances was 1.16%, with a majority being males (60.23%) aged 1-5 years (98.29%). Utilizing a specially designed nasal foreign body hook and following established treatment protocols enabled the successful outpatient management of the majority of cases. Only 12 cases (6.82%) necessitated removal under general anesthesia due to management challenges in an outpatient setting. Furthermore, our findings indicated no linear correlation between the duration of battery retention and the risk of nasal septal perforation, which was observed in 31 cases (17.61%)., Conclusion: Nasal foreign bodies caused by button batteries in children demand urgent attention due to their potentially grave outcomes. Our research is directed towards enhancing diagnostic and therapeutic strategies to bolster the success rates of outpatient removal, curtail the duration of foreign body retention, and diminish the reliance on general anesthesia., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Yan et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The reliable operation of electrical power transmission systems is crucial for ensuring consumer's stable and uninterrupted electricity supply. Faults in electrical power transmission systems can lead to significant disruptions, economic losses, and potential safety hazards. A protective approach is essential for transmission lines to guard against faults caused by natural disturbances, short circuits, and open circuit issues. This study employs an advanced artificial neural network methodology for fault detection and classification, specifically distinguishing between single-phase fault and fault between all three phases and three-phase symmetrical fault. For fault data creation and analysis, we utilized a collection of line currents and voltages for different fault conditions, modelled in the MATLAB environment. Different fault scenarios with varied parameters are simulated to assess the applied method's detection ability. We analyzed the signal data time series analysis based on phase line current and phase line voltage. We employed SMOTE-based data oversampling to balance the dataset. Subsequently, we developed four advanced machine-learning models and one deep-learning model using signal data from line currents and voltage faults. We have proposed an optimized novel glassbox Explainable Boosting (EB) approach for fault detection. The proposed EB method incorporates the strengths of boosting and interpretable tree models. Simulation results affirm the high-efficiency scores of 99% in detecting and categorizing faults on transmission lines compared to traditional fault detection state-of-the-art methods. We conducted hyperparameter optimization and k-fold validations to enhance fault detection performance and validate our approach. We evaluated the computational complexity of fault detection models and augmented it with eXplainable Artificial Intelligence (XAI) analysis to illuminate the decision-making process of the proposed model for fault detection. Our proposed research presents a scalable and adaptable method for advancing smart grid technology, paving the way for more secure and efficient electrical power transmission systems., Competing Interests: The authors declare that there is no conflict of interests., (Copyright: © 2024 Akhtar et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

High conversion ratio dc-dc converters have received significant attention in renewable energy systems, primarily due to their necessary high-gain characteristics. This research proposes a high step-up ratio full-bridge resonant cascaded (FBRC) dc-dc converter designed for use in photovoltaics (PV), fuel cells (FC), electric vehicles (EV), and other low-voltage output energy sectors to achieve high voltage gain. This converter contains a full-bridge cell with a boost input inductor, a diode-capacitor cascaded stage that replaces the transformer as a voltage multiplier and an inductor-capacitor (LC) parallel-series resonant network across the FB terminal. One of the strategic features of the converter is its high voltage step-up characteristic combined with lower duty cycle operation that limits the maximum current through the active devices, making it particularly suitable for systems that generate low output voltage. In addition, zero-voltage switching (ZVS) is achieved during the turn-off and turn-on operation of the FB switches from 25% to full load, thereby lessening the switching losses. Moreover, the diminished necessity for passive components and the decreased voltage stress on both active and passive devices lead to the use of smaller and more cost-effective components. The theoretical analysis of the proposed converter is validated using a 500 W laboratory-scale prototype wherein high-performance SiC-based MOSFETs have been utilized as switching devices. It offers reduced ripples, with input current ripple at 5% and output voltage ripple at 0.76%. When the load is 400 W and 60 V as the input voltage, the maximum efficiency is found 95.8% at 400 V output voltage. The proposed dc-dc converter, with its high voltage gain and reduced component stress, shows significant promise for application in renewable energy systems., Competing Interests: No competing interests., (Copyright: © 2024 Hossain et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

As the share of air conditioning electricity consumption within total grid electricity consumption grows, the decomposition of such consumption becomes increasingly crucial for assessing electricity usage patterns, devising consumption scheduling strategies, and maintaining the stability of the power grid. Although there is a strong correlation between apparent temperature and air conditioning electricity consumption, the literature currently available seldom explores the impact of apparent temperature on this consumption. Moreover, there is a scarcity of effective assessment indices to evaluate the efficacy of air conditioning electricity consumption breakdown. This study introduces a method for decomposing electricity consumption from air conditioning units, utilizing effective duration as a basis to tackle these issues. By employing an apparent temperature model as a constraint, this approach identifies the effective operating time of air conditioning and constructs a constrained convex optimization problem to estimate air conditioning power usage. Additionally, a novel evaluation index for the effectiveness of air conditioning electricity consumption decomposition is proposed, which includes penalties for negative decomposed consumption, alongside the traditional consistency index. Comparative experiments are conducted using real electricity consumption data from Fujian Province. Empirical results indicate that the methodology for air conditioning electricity consumption decomposition presented in this paper aligns more closely with actual conditions. Furthermore, the evaluation metrics introduced for the decomposition of air conditioning electricity consumption are adept at precisely gauging the quality of the air conditioning electricity consumption data., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Xun et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Both filter inductors, electrolytic capacitors, and radiators play a significant role in the inverter of a PV (Photovoltaic) power generation system. These three parts are the largest in an inverter, which affects the performance of the inverter. Aimed to improve the power density of a single-phase PV grid-connected inverter with a decoupling function. This paper derived the control principle that can reduce the volume of the inductor, decoupling capacitor, and the loss of the switching device to begin with the mathematical function of power processing of the filter inductor. And then, the authors deduced a boost-type power decoupled single-phase inverter topology. Based on a novel three-port three-switches flyback series circuit, this paper proposed an efficient power decoupling topology circuit for extracting the maximum power density of a single-phase grid-connected PV inverter. Finally, this article operated the simulation and experiment. Both the simulated and experimental results verified that the proposed method works well., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Jinpeng et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This paper presents the topology and machine learning-based intelligent control of high-power PV inverter for maximum power extraction and optimal energy utilization. Modular converters with reduced components economic and reliable for high power applications. The proposed integrated intelligent machine learning based control delivers power conversion control with maximum power extraction and supervisory control for optimal load demand control. The topology of the inverter, operating modes, power control and supervisory control aspects are presented. Simulation is carried out in MATLAB/SIMULINK to verify the feasibility of the proposed inverter and control algorithm. The experimental study is presented to validate the simulation results. The operational performance of the proposed topology is evaluated in terms of operational parameters such as regulation of output power, and load relay control and is compared to existing topologies. The economic performance is also evaluated in terms of power switch sizing and reliability in power delivery concerning switch or power sources failure., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Srungaram, Yadlapati. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Power transformers are the most important component in power system. Exposing these transformers to the harmonic distortions causes additional heat losses, insulation stress, decrease in lifetime of insulation, and reduced power factor with decrease in efficiency of the system. The lifespan of distribution transformers is influenced by the fragility of power quality in power networks. Harmonic mitigation filters with robust control technique are required to reduce the harmonic effects on power transformer. Traditionally, synchronous reference frame (DQ) is employed to control the shunt active power filter (APF) for mitigation of harmonics in power transformers. DQ control of Shunt APF lacks merits of fast response, delayed operation due to phased lock loop under abnormal grid conditions leading to insufficient harmonic elimination. A developed DQ method based on detecting the positive and negative sequence components is proposed to precisely control the shunt APF for reliable operation of power transformer. This detection technique improves the response time, mitigate the harmonics effecting the operation of transformer and overall power factor. The proposed control system is evaluated under different abnormal operating scenarios and compared with traditional DQ method. The results and analysis confirm the efficacy of the developed DQ method in improving the power transformer performance., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Al-Gahtani et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

DC circuit breakers (DCCBs) with high breaking capacity and low cost are necessary for quick fault clearance in DC networks. The assembly DC circuit breakers (ADCCBs) have a main breaking section (MBS) and a sub-breaking sections (SBS) for each line, which greatly reduce the cost. But in conventional operation, it bears high voltage for a long time when there is a main switch grounding process in any line fault action. To address this problem, a multiport assembly circuit breaker based on current injection (CI-MPACB) is proposed, which is able to generate a resonant current with increasing amplitude by controlling the duty cycle of Integrated Gate-Commutated Thyristors (IGCTs). Then the resonant current is injected into the SBS to generate current zero crossing and arc extinction. A complex frequency domain circuit analysis is performed on the MBS to describe the action logic as well as the commutation characteristics. In addition, the parameters of each component of the MBS are subject to multiple constraints and reasonable design to ensure the fault current could be cut off quickly and reliably. The cost of existing design is greatly reduced due to the design idea of resonant current injection device parameter selection. Finally, a PSCAD/EMTDC simulation confirms the opening viability of CI-MPACB and the accuracy of the parameter design. The test results show that the designed CI-MPACB can cut off DC fault lines., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Cui et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

When large-scale electric vehicles are connected to the grid for unordered charging, it will seriously affect the stability and security of the power system. To solve this problem, this paper proposes a regional power network optimization scheduling method considering vehicle network interaction. Initially, based on the user behavior characteristics and charging and discharging characteristics of electric vehicles, a charging and discharging behavior model of electric vehicles was established. Based on the Monte Carlo sampling algorithm, the scheduling upper and lower limits of each scheduling cycle of electric vehicles were described, and the scheduling potential of each scheduling cycle of electric vehicles was obtained. Then, the electricity price is then used as an incentive parameter to guide EV users to charge during periods of low electricity prices and participate in discharge during periods of peak electricity prices. Aiming at the highest economic efficiency, the best consumption effect of new energy and the smoothest demand-side power curve of regional power grid, a three-objective optimal dispatching model was established. In the later stage, uncertainty factors are taken into consideration by introducing the concept of interval numbers, and an interval multi-objective optimization dispatching model is established. The two dispatching models are solved by NSGA-II algorithm and improved NSGA-II algorithm, and the Pareto solution set is obtained. Finally, based on the analytic Hierarchy Process (AHP), the optimal scheduling scheme is determined. The Monte Carlo sampling method is used to simulate the user side charging demand, and the effectiveness of this method is verified. In addition, the results of the interval multi-objective optimization model and the deterministic multi-objective optimization model are compared, and it is proved that the solution results of the interval multi-objective model are more adaptive, practical and robust to the uncertain factors., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Hua et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In recent years, single-stage boost inverters with common ground have shaped the inverter markets due to the many benefits associated with these types of inverters, including their high efficiency, single control scheme, and integrated boost converter. A new boost-type inverter that utilizes a common ground and has fewer switches is proposed in this article. It uses two DC-link capacitors connected in parallel and discharged independently while being charged simultaneously. The voltage for the positive and negative half cycles is supplied by the capacitors located at the top and bottom of the circuit, respectively. In addition, a comparison is made between the proposed circuit and the boost inverter already in use in the literature. Using PLECS as the computing software, the efficiencies are determined depending on the various percentages of output power. To validate performance, present experimental data, and attain the best possible efficiency of 97%, a 400 W prototype model is constructed. In addition to that, the breakdown of the costs is shown., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Zuhair Muhammed Alaas. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

With the rapid proliferation of portable and wearable electronics, energy autonomy through efficient energy harvesting has become paramount. Thermoelectric generators (TEGs) stand out as promising candidates due to their silent operation, high reliability, and maintenance-free nature. This paper presents the design, fabrication, and analysis of a micro-scale TEG for powering such devices. A planar configuration was employed for its inherent miniaturization advantages. Finite element analysis using ANSYS reveals that a double-layer device under a 50 K temperature gradient generates an impressive open-circuit voltage of 1417 mV and a power output of 2.4 μW, significantly exceeding its single-layer counterpart (226 mV, 0.12 μW). Validation against the analytical model results yields errors within 2.44% and 2.03% for voltage and power, respectively. Furthermore, a single-layer prototype fabricated using paper shadow masks and sputtering deposition exhibits a voltage of 131 mV for a 50 K temperature difference, thus confirming the feasibility of the proposed design. This work establishes a foundation for developing highly efficient micro-TEGs for powering next-generation portable and wearable electronics., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Abdelkader et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The traditional method for power load forecasting is susceptible to various factors, including holidays, seasonal variations, weather conditions, and more. These factors make it challenging to ensure the accuracy of forecasting results. Additionally, there is a limitation in extracting meaningful physical signs from power data, which ultimately reduces prediction accuracy. This paper aims to address these issues by introducing a novel approach called VCAG (Variable Mode Decomposition-Convolutional Neural Network-Attention Mechanism-Gated Recurrent Unit) for combined power load forecasting. In this approach, we integrate Variable Mode Decomposition (VMD) with Convolutional Neural Network (CNN). VMD is employed to decompose power load data, extracting valuable time-frequency features from each component. These features then serve as input for the CNN. Subsequently, an attention mechanism is applied to give importance to specific features generated by the CNN, enhancing the weight of crucial information. Finally, the weighted features are fed into a Gated Recurrent Unit (GRU) network for time series modeling, ultimately yielding accurate load forecasting results.To validate the effectiveness of our proposed model, we conducted experiments using two publicly available datasets. The results of these experiments demonstrate that our VCAG method achieves high accuracy and stability in power load forecasting, effectively overcoming the limitations associated with traditional forecasting techniques. As a result, this approach holds significant promise for broad applications in the field of power load forecasting., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Sun et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Distributed power generation systems may necessitate connecting multiple independent energy sources that employ various converter topologies. A recent development in this field is the emergence of impedance source converters, offering the ability to deliver buck-boost functionality within a single stage. The split-source inverter (SSI) has been introduced as a novel choice in between this family. Many control strategies have emerged for electrical power systems control. Among the recent emerging controllers, model predictive control strategies have become an effective technique for control systems. Model predictive controllers (MPCs) offer a number of features compared to the conventional and counterpart models such as enhanced system response and improved system transients with reduced steady-state error. This research suggests a finite control-set MPC for three-phase single-stage SSI supporting a standalone load for remote area applications. Considering the proposed FCS-MPC, the output load current tracks its reference magnitude with minimized error. In addition, the proposed FCS-MPC enhances the proposed SSI system performance with a settling time of 10 μs, and approximately without overshoot in the output current. The system has been validated using Opal-RT OP-4510 and the power loss model of the inverter has been explained. In the end two comparisons have been presented to clarify the main points in the topology structure and the control technique., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Abdelaleem et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

State of energy (SOE) is an important parameter to ensure the safety and reliability of lithium-ion battery (LIB) system. The safety of LIBs, the development of artificial intelligence, and the increase in computing power have provided possibilities for big data computing. This article studies SOE estimation problem of LIBs, aiming to improve the accuracy and adaptability of the estimation. Firstly, in the SOE estimation process, adaptive correction is performed by iteratively updating the observation noise equation and process noise equation of the Adaptive Cubature Kalman Filter (ACKF) to enhance the adaptive capability. Meanwhile, the adoption of high-order equivalent models further improves the accuracy and adaptive ability of SOE estimation. Secondly, Long Short-term Memory (LSTM) is introduced to optimize Ohmic internal resistance (OIR) and actual energy (AE), further improving the accuracy of SOE estimation. Once again, in the process of OIR and AE estimation, the iterative updating of the observation noise equation and process noise equation of ACKF were also adopted to perform adaptive correction and enhance the adaptive ability. Finally, this article establishes a SOE estimation method based on LSTM optimized ACKF. Validate the LSTM optimized ACKF method through simulation experiments and compare it with individual ACKF methods. The results show that the ACKF estimation method based on LSTM optimization has an SOE estimation error of less than 0.90% for LIB, regardless of the SOE at 100%, 65%, and 30%, which is more accurate than the SOE estimation error of ACKF alone. It can be seen that this study has improved the accuracy and adaptability of LIB's SOE estimation, providing more accurate data support for ensuring the safety and reliability of lithium batteries., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Hou et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Solid oxide fuel cells (SOFCs) are vital for alternative energy, powering motors effi-ciently. They offer fuel versatility and waste heat recovery, making them ideal for various applications. Optimizing interconnector structures is crucial for SOFC advancement. This paper introduces a novel 2D simulation model for interconnector SOFCs, aiming to enhance their performance. We initially construct a single half-cell model for a conventional interconnector SOFC, ensuring model accuracy. Subsequently, we propose an innovative interconnector SOFC model, which outperforms the conventional counterpart in various aspects., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Sun et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This article represents a novel study of the design and analysis of a wind turbine system that includes a line-side permanent magnet synchronous generator (PMSG) with an ultra-step-up DC-DC converter for voltage regulation. Integrating renewable energy sources such as wind power into the grid requires efficient and reliable power conversion systems to handle fluctuating power and ensure a stable power supply. The wind turbine system utilizes a PMSG, which offers several advantages over traditional induction generators, including higher efficiency, reduced maintenance, and better power quality. The line-side configuration allows for increased control and flexibility, allowing the system to respond dynamically to grid conditions. This wind turbine system involves the integration of a grid-side PMSG-fed DC-DC converter between the PMSG and the grid. The converter enables a seamless flow of electricity between the wind turbine and the grid. By actively controlling the intermediate circuit voltage, the converter efficiently regulates the output voltage of the wind turbine and thus enables constant power generation regardless of fluctuating wind speeds. The simulation outcomes illustrate the efficacy of the proposed system in achieving voltage regulation and seamless integration with the grid. Performance is evaluated under various operating conditions and compared to conventional wind turbines., Competing Interests: no competing interests exist., (Copyright: © 2024 Reddy et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The range of an electrically assisted bicycle, which is constrained by the rider's cycling ability and the battery capacity, is heavily influenced by rolling resistance. Furthermore, the magnitude of rolling resistance affects commuters' motivation to decide whether to cycle or to choose another way to commute. This paper presents a way to simulate the transient rolling resistance of bicycle tyres as a function of ambient temperature. The significance of the change in driving resistance at different ambient temperatures is demonstrated through the range simulation of an electrically assisted bicycle at varying ambient temperatures. A representative driving cycle for bicycle commuters was created, enabling comparison of dynamic behaviour in a standardised set, to evaluate the effect of ambient temperature on the battery capacity and the increase in driving resistances. To the authors' knowledge, this kind of model has not previously been created for bicycles. The model calculates tyre temperature based on the heat transfer, considering the heating-i. e., rolling resistance-and cooling effects-i. e., convective and radiative cooling. The decrease in tyre temperature results in an increase in rolling resistance and a decrease in the battery capacity, which was considered in the simulations. The results show significantly increased energy demand at a very low ambient temperature (down to -30°C) compared to + 20°C. The novelty of this article is simulating energy expenditure of bicycle dynamically as a function of ambient temperature. This model includes a temperature-dependent transient bicycle rolling resistance model as well as a battery capacity model. The findings provide researchers with a better comprehension of parameters affecting energy expenditure of bicycles at different ambient or tyre temperatures. The models can be used as a tool during the design process of bicycles to quantify the required battery capacities at different climates. In addition, traffic planners can use the model to assess the effect of changes in infrastructure on motivation to utilise bicycles., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Hyttinen et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The demand for renewable energy-based Electric Vehicle (EV) charging infrastructure is increasing in recent years. Solar PV based EV charging method is preferred as it has simple energy harvesting technique. The PV system is an uncertain power source, where the power generation is varied with respect to the availability of sunlight. So, that the charging station requires a backup power supply for the uninterrupted charging. For the integrated power sources, the charging station requires a simple and efficient conversion unit for the DC/AC/DC conversion. In this work, a modified Z-source inverter (MZSI) is developed for the multiport EV charger using PV and grid. The proposed MZSI is connected between the input and output sides to boost the voltage as per the demand at the battery side. In order to connect many battery units with the charger, the capacitors used in the MZSI are split as per the required number of charging ports. This developed converter topology operates the systems in four different modes like PV-Grid, PV-battery, grid-battery, and battery-grid. The performance of this proposed work has been validated in MATLAB/Simulink® and in the experimental setup. The experimental setup has been developed with two charging ports for obtaining 250W at each charger end which cumulatively produces 500W output across both chargers with an efficiency of 90.18%., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 G. et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In this study, a simple calcination route was adopted to prepare hausmannite Mn3O4 nanoparticles using rice powder as soft bio-template. Prepared Mn3O4 was characterized by Fourier Transform Infra-Red Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray microanalysis (EDX), Powder X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Brunauer-Emmett-Teller (BET) and Solid state UV-Vis spectroscopic techniques. Mn-O stretching in tetrahedral site was confirmed by FTIR and Raman spectra. % of Mn and O content supported Mn3O4 formation. The crystallinity and grain size was found to be 68.76% and 16.43 nm, respectively; tetragonal crystal system was also cleared by XRD. TEM clarified the planes of crystal formed which supported the XRD results and BET demonstrated mesoporous nature of prepared Mn3O4 having low pore volume. Low optical band gap of 3.24 eV of prepared Mn3O4 nanoparticles indicated semiconductor property and was used as cathode material to fabricate CR-2032 coin cell of Aqueous Rechargeable Zinc Ion Battery (ARZIB). A reversible cyclic voltammogram (CV) showed good zinc ion storage performance. Low cell resistance was confirmed by Electrochemical Impedance Spectroscopy (EIS). The coin cell delivered high specific discharge capacity of 240.75 mAhg-1 at 0.1 Ag-1 current density. The coulombic efficiency was found to be 99.98%. It also delivered excellent capacity retention 94.45% and 64.81% after 300 and 1000 charge-discharge cycles, respectively. This work offers a facile and cost effective approach for preparing cathode material of ARZIBs., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Tonu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In this paper, a Multi-Index Nonlinear Robust Adaptive Control (MINRAC) method was proposed for ultra-complex multi-input multi-output power systems with uncertain parameter factors and external disturbances. The controller designed by this method has excellent static and dynamic characteristics. Under the condition of the uncertainty of system parameters and external disturbance at the same time, the MINRAC method can ensure that the multiple indexes concerned by ultra-complex power systems can be controlled at their expected values. The simulation results showed that the control mechanism of MINRAC method was consistent in both single-machine infinite bus system and multi-machine interconnected coupling system. The output function chooses power angle, angular frequency and terminal voltage as constraints. When the system has parameter uncertainty and external interference, the uncertain parameter values are adjusted by adaptive control to force these indicators to tend to the given expected value. For three-phase short circuit, which is the most serious fault in power system, the use of multi index nonlinear robust controller can ensure that the system is stable in a wide range and has better dynamic performance., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Huang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The traction converter modulation generates switching-frequencies current harmonics. The trapped filters can eliminate these switching harmonics, reducing total inductance and filter size. Nonetheless, in comparison with the typical inductor-capacitor-inductor (LCL) filter, the trap inductor needs a larger magnetic core. Moreover, the trapped filter has not been analyzed in the traction systems. This paper proposes a magnetic integrated inductor-trap-inductor (LLCL) filter to decrease the filter's size and investigate its application in traction converters. In fact, the application range of this filter is quite broad, and it can be used in various electrical power systems, including industrial power systems, renewable energy systems, transportation systems, and building power systems. The LC-trap may be formed by connecting the equivalent trap inductor, introduced through the magnetic coupling between inverter-side and grid-side inductors, in series with the filter capacitor. Furthermore, for H-bridge unipolar pulse width modulation (PWM) traction converters, the prominent switching harmonics are concentrated at the double switching frequencies. Therefore, the stability zone is expanded by moving the resonance above the Nyquist frequency. The presented filter's features and design are thoroughly analyzed. The proposed method is finally validated by the MATLAB/Simulink simulation and hardware-in-the-loop (HIL) experimental results. Compared to the discrete windings, the integrated ones can save two magnetic cores. Furthermore, the proposed filter can meet IEEE criteria with 0.3% for all the harmonics and total harmonic distortion (THD) of 2.15% of the grid-side current., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Al-Barashi et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Maintaining stable voltage levels is essential for power systems' efficiency and reliability. Voltage fluctuations during load changes can lead to equipment damage and costly disruptions. Automatic voltage regulators (AVRs) are traditionally used to address this issue, regulating generator terminal voltage. Despite progress in control methodologies, challenges persist, including robustness and response time limitations. Therefore, this study introduces a novel approach to AVR control, aiming to enhance robustness and efficiency. A custom optimizer, the quadratic wavelet-enhanced gradient-based optimization (QWGBO) algorithm, is developed. QWGBO refines the gradient-based optimization (GBO) by introducing exploration and exploitation improvements. The algorithm integrates quadratic interpolation mutation and wavelet mutation strategy to enhance search efficiency. Extensive tests using benchmark functions demonstrate the QWGBO's effectiveness in optimization. Comparative assessments against existing optimization algorithms and recent techniques confirm QWGBO's superior performance. In AVR control, QWGBO is coupled with a cascaded real proportional-integral-derivative with second order derivative (RPIDD2) and fractional-order proportional-integral (FOPI) controller, aiming for precision, stability, and quick response. The algorithm's performance is verified through rigorous simulations, emphasizing its effectiveness in optimizing complex engineering problems. Comparative analyses highlight QWGBO's superiority over existing algorithms, positioning it as a promising solution for optimizing power system control and contributing to the advancement of robust and efficient power systems., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Ekinci et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The output signals in natural dyes-based solar cells (DSSC) can be either rising or decaying depending on the type of ions present in the system; these ions called added ions, are introduced by the additives: mordant and brighteners. The photon-dye interaction produces electrons, which eventually reach the electrode giving place to a superficially charged electrode in contact with an electrolyte where are the added ions. This combination produces, automatically, an electrical double-layer EDL structure which has important effects on the performance of the system: a) the added ions control, to a large extent, the initial shape of the output signal, giving rise to rising or decaying profiles; b) it is possible to store large amounts of energy and charge at high electric fields. This structure is found in many other systems that have a surface charged in contact with an electrolyte like piezoelectric materials in human body. This assertion was supported by determining important parameters such as the force between charged surfaces on both sides of the interface, the charge density, the energy density, and the capacitance. The Debye length has very small values then, many important quantities depend on this; it is possible to obtain large values for energy UDL ~ 3.6x105 Jm-3 and charge density ρDL ≈ 1.1x107 Cm-3 for double layer capacitors; these values are orders of magnitude larger than the corresponding values for electrostatic capacitors: Uelec ≈ 4.5x10-3 Jm-3 and ρelec ≈ 1.2 Cm-3. A non-linear model was also developed to fit unstable oscillations found in the output profiles produced by abrupt lighting., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Vargas et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The design of a power electronic interface for high voltage difference DC buses is a key aspect in DC microgrid applications. A multi-port non isolated interleaved high-voltage gain bidirectional converter, which facilitates bidirectional power transfer and islanded operation in a DC microgrid, is presented in this paper. The forward high-voltage transfer ratio is achieved using a voltage multiplier circuit, and the high-gain step-down power conversion is performed using a resonant power module. A novel power transfer selection algorithm is proposed to control power flow among the interfaces of the RES, ESS, and DC grid converters, which utilizes the net power difference as the basis for switching the converter. The proposed converter is simulated for a 24 V PV source, 12 V battery, and 400 V DC grid interface using MATLAB/SIMULINK. A 200 W hardware prototype is implemented. The simulation results for voltages, currents, and power flow among RES, ESS, and microgrid DC bus proved an excellent voltage regulation, efficient power conversion, and a feasible duty cycle range with high voltage gain. These observations are validated through equivalent experimental results. A comparison is made regarding achieved gain, component sizing, achievable power transfer modes, efficiency, and control complexity with existing converters for DC microgrid applications. The presented topology proved to be a better interface with multiple-mode support with high efficiency., Competing Interests: The authors declare no competing interests., (Copyright: © 2024 Sreelatha et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Integration of renewable energy sources (RES) to the grid in today's electrical system is being encouraged to meet the increase in demand of electrical power and also overcome the environmental related problems by reducing the usage of fossil fuels. Power Quality (PQ) is a critical problem that could have an effect on utilities and consumers. PQ issues in the modern electric power system were turned on by a linkage of RES, smart grid technologies and widespread usage of power electronics equipment. Unified Power Quality Conditioner (UPQC) is widely employed for solving issues with the distribution grid caused by anomalous voltage, current, or frequency. To enhance UPQC performance, Fractional Order Proportional Integral Derivative (FOPID) is developed; nevertheless, a number of tuning parameters restricts its performance. The best solution for the FOPID controller problem is found by using a Coati Optimization Algorithm (COA) and Osprey Optimization Algorithm (OOA) are combined to make a hybrid optimization CO-OA algorithm approach to mitigate these problems. This paper proposes an improved FOPID controller to reduce PQ problems while taking load power into account. In the suggested model, a RES is connected to the grid system to supply the necessary load demand during the PQ problems period. Through the use of an enhanced FOPID controller, both current and voltage PQ concerns are separately modified. The pulse signal of UPQC was done using the optimal controller, which analyzes the error value of reference value and actual value to generate pulses. The integrated design mitigates PQ issues in a system at non-linear load and linear load conditions. The proposed model provides THD of 12.15% and 0.82% at the sag period, 10.18% and 0.48% at the swell period, and 10.07% and 1.01% at the interruption period of non-linear load condition. A comparison between the FOPID controller and the traditional PI controller was additionally taken. The results showed that the recommended improved FOPID controller for UPQC has been successful in reducing the PQ challenges in the grid-connected RESs system., (Copyright: © 2024 Devi et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This paper introduces a novel and improved double-resistor damped double-tuned passive power filter (DR-DDTF), designed using multi-objective optimization algorithms to mitigate harmonics and increase the hosting capacity of distribution systems with distributed energy resources. Although four different topologies of single-resistor damped double-tuned filters (DDTFs) have been studied before in the literature, the effectiveness of two different DR-DDTF configurations has not been examined. This work redresses this gap by demonstrating that via comprehensive simulations on two power systems, DR-DDTF provides better harmonic suppression and resonance mitigation than single-resistor alternatives. When it comes to optimizing the DR-DDTF for maximum hosting capacity and minimum system active power losses, the multi-objective artificial hummingbird outperformed six other algorithms in the benchmark. To allow for higher penetration of distributed generation without requiring grid upgrades, this newly developed harmonic mitigation filter provides a good alternative., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Alhaider et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Electroless nickel plating is a suitable technology for the hydrogen industry because electroless nickel can be mass-produced at a low cost. Investigating in a complex environment where hydrogen permeation and friction/wear work simultaneously is necessary to apply it to hydrogen valves for hydrogen fuel cell vehicles. In this research, the effects of hydrogen permeation on the mechanical characteristics of electroless nickel-plated free-cutting steel (SUM 24L) were investigated. Due to the inherent characteristics of electroless nickel plating, the damage (cracks and delamination of grain) and micro-particles by hydrogen permeation were clearly observed at the grain boundaries and triple junctions. In particular, the cracks grew from grain boundary toward the intergranualr. This is because the grain boundaries and triple junctions are hydrogen permeation pathways and increasing area of the hydrogen partial pressure. As a result, its surface roughness increased by a maximum of two times, and its hardness and adhesion strength decreased by hydrogen permeation. In particular, hydrogen permeation increased the friction coefficient of the electroless nickel-plated layer, and the damage caused by adhesive wear was significantly greater, increasing the wear depth by up to 5.7 times. This is believed to be due to the decreasing in wear resistance of the electroless nickel plating layer damaged by hydrogen permeation. Nevertheless, the Vickers hardness and the friction coefficient of the electroless nickel plating layer were improved by about 3 and 5.6 times, respectively, compared with those of the free-cutting steel. In particular, the electroless nickel-plated specimens with hydrogen embrittlement exhibited significantly better mechanical characteristics and wear resistance than the free-cutting steel., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Shin, Kim. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This research introduces a new designing process and analysis of an innovative Silicon-on-Insulator Metal-Semiconductor Field-Effect (SOI MESFET) structure that demonstrates improved DC and RF characteristics. The design incorporates several modifications to control and reduce the electric field concentration within the channel. These modifications include relocating the transistor channel to sub-regions near the source and drain, adjusting the position of the gate electrode closer to the source, introducing an aluminum layer beneath the channel, and integrating an oxide layer adjacent to the gate. The results show that the AlOx-MESFET configuration exhibits a remarkable increase of 128% in breakdown voltage and 156% in peak power. Furthermore, due to enhanced conductivity and a significant reduction in gate-drain capacitance, there is a notable improvement of 53% in the cut-off frequency and a 28% increase in the maximum oscillation frequency. Additionally, the current gain experiences a boost of 15%. The improved breakdown voltage and peak power make it suitable for applications requiring robust performance under high voltage and power conditions. The increased maximum oscillation frequency and cut-off frequency make it ideal for high-frequency applications where fast signal processing is crucial. Moreover, the enhanced current gain ensures efficient amplification of signals. The introduced SOI MESFET structure with its modifications offers significant improvements in various performance metrics. It provides high oscillation frequency, better breakdown voltage and good cut-off frequency, and current gain compared to the traditional designs. These enhancements make it a highly desirable choice for applications that demand high-frequency and high-power capabilities., Competing Interests: Author Contributions: Every author contributed to the conceptualization and design of the study, preparation of materials, data gathering, and analysis. All authors have reviewed and given ap-proval for the final version of the manuscript. Declarations: Competing Interests: The authors declare no significant financial or non-financial conflicts of interest related to this work., (Copyright: © 2024 Ghiasi et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

With the rapid development of the Internet, the continuous increase of malware and its variants have brought greatly challenges for cyber security. Due to the imbalance of the data distribution, the research on malware detection focuses on the accuracy of the whole data sample, while ignoring the detection rate of the minority categories' malware. In the dataset sample, the normal data samples account for the majority, while the attacks' malware accounts for the minority. However, the minority categories' attacks will bring great losses to countries, enterprises, or individuals. For solving the problem, this study proposed the GNGS algorithm to construct a new balance dataset for the model algorithm to pay more attention to the feature learning of the minority attacks' malware to improve the detection rate of attacks' malware. The traditional malware detection method is highly dependent on professional knowledge and static analysis, so we used the Self-Attention with Gate mechanism (SAG) based on the Transformer to carry out feature extraction between the local and global features and filter irrelevant noise information, then extracted the long-distance dependency temporal sequence features by the BiGRU network, and obtained the classification results through the SoftMax classifier. In the study, we used the Alibaba Cloud dataset for malware multi-classification. Compared the GSB deep learning network model with other current studies, the experimental results showed that the Gaussian noise generation strategy (GNGS) could solve the unbalanced distribution of minority categories' malware and the SAG-BiGRU algorithm obtained the accuracy rate of 88.7% on the eight-classification, which has better performance than other existing algorithms, and the GSB model also has a good effect on the NSL-KDD dataset, which showed the GSB model is effective for other network intrusion detection., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Hu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)