Search

This study proposes a methodical approach to model desired speed distributions under different road-weather and traffic conditions followed by identification of road-weather conditions with potentially higher safety risks in rural divided highways located in extremely cold regions. Desired speed distributions encompassing unique combinations of adverse road-weather and traffic conditions are modelled as normal distributions characterized by their means and standard deviations formulated based on two principal statistical theorems and techniques i.e., Central Limit Theorem and Minimum Variance Unbiased Estimation. Combination of the precipitation conditions, road surface conditions, time of the day, temperature, traffic flow and the heavy vehicle percentage at the time of travel were considered in defining the combinations of road-weather and traffic conditions. The findings reveal that simultaneous occurrence of particular precipitation and pavement conditions significantly affect the characteristics of the desired speed distribution and potentially expose drivers to elevated safety risks. Jurisdictions experiencing extreme road-weather conditions may adapt the proposed methodology to assess speed behaviour under different road-weather conditions to establishing and deploying weather-responsive traffic management strategies such as variable speed limit to regulate speeding and improve traffic safety in winter.

Urban traffic is an important source of global CO2 emissions. Uncovering the temporal and structural characteristics can provide scientific support to identify the variation regulation and main subjects of urban traffic CO2 emissions. The road class is one of the most important factors influencing the urban traffic CO2 emissions. Based on the annual traffic field monitoring work in 2014 and the localized MOVES model, this study unravels the temporal variation and structural characteristics of the urban traffic CO2 emissions and conducts a comparative analysis of expressway (5R) and arterial road (DB), two typical classes of urban roads in Beijing. Obvious differences exist in the temporal variation characteristics of the traffic CO2 emissions between the expressway and arterial road at the annual, week and daily scales. The annual traffic CO2 emissions at the expressway (5R, with 47271.15 t) are more than ten times than those of the arterial road (DB, with 4139.19 t). Stronger weekly "rest effect" is observed at the expressway than the arterial road. The daily peak time and duration of the traffic CO2 emissions between the two classes of urban roads show significant differences particular in the evening peak. The differences of the structural characteristics between the two classes of urban roads are mainly reflected on the contribution of the public and freight transportation. Passenger vehicles play a predominant role at both the two classes of urban roads. The public transportation contributed more at DB (24.76%) than 5R (5.47%), and the freight transportation contributed more at 5R (23.41%) than DB (3.49%). The results suggest that the influence of traffic CO2 emissions on the CO2 flux is significant at the residential and commercial mixed underlying urban areas with arterial roads (DB) but not significant at the underlying urban park area with expressway (5R) in this study. The vegetation cover in urban areas have effects on the CO2 reduction. Increasing the design and construction of the green space along the urban roads with busy traffic flow will be an effective way to mitigate the urban traffic CO2 emissions and build the low-carbon cities.

In order to study driving performance at the opening section of median strip (hereafter OSMS) on the freeway capacity expansion project, this study separately controlled 9 different simulated experimental scenarios of OSMS length and freeway traffic flow. 25 participants were recruited to perform 225 simulated driving tests using the driving simulator, and the analysis of variance (ANOVA) was used to analyze the driving characteristics which can represent the safety context. The results show that the safety parameters of driving are different when the length of OSMS and the traffic flow are different. When the traffic flow is low or moderate, the OSMS length can significantly affect the speed of the vehicle and the maximum values of time to collision. The higher the traffic flow, the smaller the minimum values of time headway. As the length of the OSMS decreases, the vehicles are more generally concentrated at the end of the opening area with the minimum values of time headway. The study also found that when the traffic volume is high, the impact of the OSMS length on driving performance will be weakened. In addition, the OSMS length and the traffic flow have little impact on driving comfort. Additionally, when the traffic flow is low or moderate, the opening length can significantly affect the driving behavior and safety of the vehicle. However, when the traffic volume is high, the impact of the opening length on them will be relatively weakened to some extent. Therefore, it is advised that in the case of freeways with large traffic volume, merely extending the length of the opening section does not necessarily optimize safety. Rather, the actual traffic density of the road should be carefully considered before a design length is adopted.

How to effectively solve traffic congestion and transportation pollution in urban development is a main research emphasis for transportation management agencies. A carbon emissions tax can affect travelers’ generalized costs and will lead to changes in passenger demand, mode choice and traffic flow equilibrium in road networks, which are of significance in green travel and low-carbon transportation management. This paper first established a mesoscopic model to calculate the carbon emissions tax and determined the value of this charge in China, which was based on road traffic flow, vehicle speed, and carbon emissions. Referring to existing research results to calibrate the value of time, this paper modified the traveler’s generalized cost function, including the carbon emissions tax, fuel surcharge and travel time cost, which can be used in the travel impedance model with the consideration of the carbon emissions tax. Then, a method for analyzing urban road network traffic flow distribution was put forward, and a joint traffic distribution model was established, which considered the relationship between private cars and taxis. Finally, this paper took the city of Panjin as an example to analyze the road traffic carbon emissions tax’s impact. The results illustrated that the carbon emissions tax has a positive effect on road network flow equilibrium and carbon emission reduction. This paper will have good reference value and practical significance for the calculation and implementation of urban traffic carbon emissions taxes in China.

This paper presents the use of the Aimsun microsimulation program to simulate vehicle violating behaviors and observe their impact on road traffic crash risk. Plugins for violations of speeding, slow driving, and abrupt stopping were developed using Aimsun's API and SDK module. A safety analysis plugin for investigating probability of rear-end collisions was developed, and a method for analyzing collision risk is proposed. A Fuzzy C-mean Clustering algorithm was developed to identify high risk states in different road segments over time. Results of a simulation experiment based on the G15 Expressway in Shanghai showed that abrupt stopping had the greatest impact on increasing collision risk, and the impact of violations increased with traffic volume. The methodology allows for the evaluation and monitoring of risks, alerting of road hazards, and identification of hotspots, and could be applied to the operations of existing facilities or planning of future ones.

To deal with the conflicts between left-turn and through traffic streams and increase the discharge capacity, this paper addresses the pre-signal which is implemented at a signalized intersection. Such an intersection with pre-signal is termed as a tandem intersection. For the tandem intersection, phase swap sorting strategy is deemed as the most effective phasing scheme in view of some exclusive merits, such as easier compliance of drivers, and shorter sorting area. However, a major limitation of the phase swap sorting strategy is not considered in previous studies: if one or more vehicle is left at the sorting area after the signal light turns to red, the capacity of the approach would be dramatically dropped. Besides, previous signal control studies deal with a fixed timing plan that is not adaptive with the fluctuation of traffic flows. Therefore, to cope with these two gaps, this paper firstly takes an in-depth analysis of the traffic flow operations at the tandem intersection. Secondly, three groups of loop detectors are placed to obtain the real-time vehicle information for adaptive signalization. The lane selection behavior in the sorting area is considered to set the green time for intersection signals. With the objective of minimizing the vehicle delay, the signal control parameters are then optimized based on a dynamic programming method. Finally, numerical experiments show that average vehicle delay and maximum queue length can be reduced under all scenarios.

In developing nations, many expanding cities are facing challenges that result from the overwhelming numbers of people and vehicles. Collecting real-time, reliable and precise traffic flow information is crucial for urban traffic management. The main purpose of this paper is to develop an adaptive model that can assess the real-time vehicle counts on urban roads using computer vision technologies. This paper proposes an automatic real-time background update algorithm for vehicle detection and an adaptive pattern for vehicle counting based on the virtual loop and detection line methods. In addition, a new robust detection method is introduced to monitor the real-time traffic congestion state of road section. A prototype system has been developed and installed on an urban road for testing. The results show that the system is robust, with a real-time counting accuracy exceeding 99% in most field scenarios.

© 2017 Kuang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. In this paper, we aim to examine the relationship between traffic flow and potential conflict risks by using crash surrogate metrics. It has been widely recognized that one traffic flow corresponds to two distinct traffic states with different speeds and densities. In view of this, instead of simply aggregating traffic conditions with the same traffic volume, we represent potential conflict risks at a traffic flow fundamental diagram. Two crash surrogate metrics, namely, Aggregated Crash Index and Time to Collision, are used in this study to represent the potential conflict risks with respect to different traffic conditions. Furthermore, Beijing North Ring III and Next Generation SIMulation Interstate 80 datasets are utilized to carry out case studies. By using the proposed procedure, both datasets generate similar trends, which demonstrate the applicability of the proposed methodology and the transferability of our conclusions.

Vehicle movements at signalized intersections should follow the guidance of lane marking arrows. Turns are permitted or banned depending on the existence of lane marking arrows establishing network link connectivity. Lane markings are the interface that joins consecutive upstream and downstream intersections. Traffic flows from origins to destinations across intersections should be governed by lane markings. In this study, conventionally fixed lane markings are relaxed as binary variables to be optimized by maximizing the green bandwidths. The proposed methodology is innovative in that it extends the lane-based design framework to incorporate green band maximization for enhancing traffic signal coordination. Path flows are controlled to satisfy flow conservations and to compile turning flows at intersections. With these turning flows as inputs, lane markings can be optimized together with the coordinated traffic signal settings. Path flows, path travel times, and path choices are evaluated through new linear constraints. For path travel times, cruise times along lanes and total delays at the ends of lanes are evaluated. The non-linear total delays are approximated by the proposed linearized delay function. The model coefficients are calibrated by network data as in a previous study. The problem is formulated as a binary-mixed-integer-linear-program and solved by standard branch-and-bound techniques using a CPLEX solver. To avoid non-linearity in the problem formulation, the bandwidth maximization approach is adopted instead of minimizing the total network delay in the design of the signalized network. A network with four intersections is provided to demonstrate how optimized lane markings can create efficient network link configurations. The numerical results are promising compared with those obtained in previous studies and show that the overall network performance can be improved.

The vehicle-pedestrian encounter at midblock crosswalks in urban centers is inevitable but the challenge to urban transportation planners is in achieving a balance between traffic flow efficiency and pedestrian safety. Vehicles are expected to yield to pedestrians who have a right of way at the midblock unsignalized crosswalks but, failure to yield causes conflicts that at times are fatal. This study investigated the effect of macroscopic factors on the vehicle yielding. Six environmental factors are considered: temporal gap size, number of traffic lanes, number of waiting pedestrians, position of pedestrian (whether on street kerb or median), traffic flow direction and presence (or absence) of monitoring ePolice. Video Data on six observed variables that influenced vehicle yielding was collected from 13 uncontrolled crosswalk locations in Shanghai city in the Peoples Republic of China. A Logit model with a 95.9% accuracy was developed to describe the vehicle yielding behavior. The results showed that gap size and number of traffic lanes had the highest influence on driver yielding decision and that drivers were more likely to yield if ePolice was present. The sensitivity analysis was conducted and appropriate recommendations on improving the pedestrians crossing safety were proposed accordingly.

Traffic congestion varies spatially and temporally. The observation of the formation, propagation and dispersion of network traffic congestion can lead to insights about the network performance, the bottleneck dynamics etc. While many researchers use the traffic flow data to reconstruct the congestion profile, the data missing problem is bypassed. Current methods either omit the missing data or supplement the missing part by average etc. Great error may be introduced during these processes. Rather than simply discarding the missing data, this research regards the data missing event as a result of either the severe congestion which prevent the floating vehicle from entering the congested area, or a type of feature of the resulting traffic flow time series. Hence a new traffic flow operational index time series similarity measurement is expected to be established as a basis of identifying the dynamic network bottleneck. The method first measures the traffic flow operational similarity between pairs of neighboring links, and then the similarity results are used to cluster the spatial-temporal congestion. In order to get the similarity under missing data condition, the measurement is implemented in a two-stage manner: firstly the so called first order similarity is calculated given that the traffic flow variables are bounded both upside and downside; then the first order similarity is aggregated to generate the second order similarity as the output. We implement the method on part of the real-world road network; the results generated are not only consistent with empirical observation, but also provide useful insights.

This empirical study sheds light on the spatial correlation of traffic links under different traffic regimes. We mimic the behavior of real traffic by pinpointing the spatial correlation between 140 freeway traffic links in a major sub-network of the Minneapolis-St. Paul freeway system with a grid-like network topology. This topology enables us to juxtapose the positive and negative correlation between links, which has been overlooked in short-term traffic forecasting models. To accurately and reliably measure the correlation between traffic links, we develop an algorithm that eliminates temporal trends in three dimensions: (1) hourly dimension, (2) weekly dimension, and (3) system dimension for each link. The spatial correlation of traffic links exhibits a stronger negative correlation in rush hours, when congestion affects route choice. Although this correlation occurs mostly in parallel links, it is also observed upstream, where travelers receive information and are able to switch to substitute paths. Irrespective of the time-of-day and day-of-week, a strong positive correlation is witnessed between upstream and downstream links. This correlation is stronger in uncongested regimes, as traffic flow passes through consecutive links more quickly and there is no congestion effect to shift or stall traffic. The extracted spatial correlation structure can augment the accuracy of short-term traffic forecasting models.