Search

With the construction and development of ultra-high voltage (UHV) power grids, large-scale, long-distance power transmission has become common. A failure of the connecting line between the sending-end power grid and the receiving-end power grid will cause a large-scale power shortage and a frequency drop in the receiving-end power grid, which can result in the frequency collapse. Presently, under-frequency load shedding (UFLS) is adopted for solving the frequency control problem in emergency under-frequency conditions, which can easily cause large load losses. In this context, a frequency coordination optimal control strategy is proposed, which combines the mode transition of pumped storage units with UFLS to deal with emergency under-frequency problems. First, a mathematical model of the frequency dynamic response is established, which combines the mode transition of pumped storage units with UFLS based on a single-machine equivalent model. Then, an optimal model of the minimal area of the power system’s operation frequency trajectory is introduced, yielding the optimal frequency trajectory, and is used for obtaining the action frequency of the joint control strategy. A simulated annealing algorithm based on the perturbation analysis is proposed for solving the optimal model, and the optimal action frequency is obtained that satisfies the transient frequency offset safety constraint of the power system. Thus, the joint optimal control of the mode transition of the pumped storage units and UFLS is realized. Finally, the EPRI-36 bus system and China’s actual power grid are considered, for demonstrating the efficiency of the proposed strategy.

Unless the targeted mesh is developable, metric distortion is inevitable during the process of surface mesh parameterization, thus one important objective of all involved parametric studies is to reduce the metric distortion. In order to further reduce area and angle distortion, a novel method of boundary-free mesh parameterization is presented in the paper. Firstly, the initial boundary-fixed conformal parameterization from 3D surface mesh patch to a plane is performed in the method. Then, based on the initial parameterization, the iterations of boundary-free quasi-harmonic parameterization are developed, where the tensor field is updated in each iterative step and the principal curvature direction is utilized to terminate the iteration. The solution of the novel method is convenient to calculate since it involves a series of linear systems. In our novel parameterization method, lower metric distortion and considerable efficiency have been obtained in experiments.

Traffic congestion in freeway network is a prevalent transportation problem and leads to a strong degradation of freeway network facilities. This paper proposes a new coordinated optimization approach for freeway network, aiming to relieve the traffic congestion in freeway network equipped with the coordinated traffic controllers. The challenge is how to solve the problem between the traffic control goals of each path and those of the network. In this paper, the bi-level programming theory is used to address this problem. More exactly, in the path level, the optimal control model is designed to relieve congestion in each path of the test network. Furthermore, in the network level, the optimal model considers the traffic equilibrium and cost optimization. The efficiency of the proposed approach is tested on a well-known traffic network calibrated by the field test data of freeway network. The results show that the proposed approach has positive effects in balancing traffic load and improving the service level of freeway networks.

Numerous data mining models have been proposed to construct computer-aided medical expert systems. Bayesian network classifiers (BNCs) are more distinct and understandable than other models. To graphically describe the dependency relationships among clinical variables for thyroid disease diagnosis and ensure the rationality of the diagnosis results, the proposed k-dependence causal forest (KCF) model generates a series of submodels in the framework of maximum spanning tree (MST) and demonstrates stronger dependence representation. Friedman test on 12 UCI datasets shows that KCF has classification accuracy advantage over the other state-of-the-art BNCs, such as Naive Bayes, tree augmented Naive Bayes, and k-dependence Bayesian classifier. Our extensive experimental comparison on 4 medical datasets also proves the feasibility and effectiveness of KCF in terms of sensitivity and specificity.

Phosphorylation is catalyzed by protein kinases and is irreplaceable in regulating biological processes. Identification of phosphorylation sites with their corresponding kinases contributes to the understanding of molecular mechanisms. Mass spectrometry analysis of phosphor-proteomes generates a large number of phosphorylated sites. However, experimental methods are costly and time-consuming, and most phosphorylation sites determined by experimental methods lack kinase information. Therefore, computational methods are urgently needed to address the kinase identification problem. To this end, we propose a new kernel-based machine learning method called Supervised Laplacian Regularized Least Squares (SLapRLS), which adopts a new method to construct kernels based on the similarity matrix and minimizes both structure risk and overall inconsistency between labels and similarities. The results predicted using both Phospho.ELM and an additional independent test dataset indicate that SLapRLS can more effectively identify kinases compared to other existing algorithms.

The correspondence of a stack of planar contours in ICT (industrial computed tomography)-based reverse engineering, a key step in surface reconstruction, is difficult when the contours or topology of the object are complex. Given the regularity of industrial parts and similarity of the inter-layer contours, a specialized shape-based inter-layer contours correspondence method for ICT-based reverse engineering was presented to solve the above problem based on the vectorized contours. In this paper, the vectorized contours extracted from the slices consist of three graphical primitives: circles, arcs and segments. First, the correspondence of the inter-layer primitives is conducted based on the characteristics of the primitives. Second, based on the corresponded primitives, the inter-layer contours correspond with each other using the proximity rules and exhaustive search. The proposed method can make full use of the shape information to handle industrial parts with complex structures. The feasibility and superiority of this method have been demonstrated via the related experiments. This method can play an instructive role in practice and provide a reference for the related research.

By using entropy and local neighborhood information, we present in this study a robust adaptive Gaussian regularizing Chan-Vese (CV) model to segment the myocardium from magnetic resonance images with intensity inhomogeneity. By utilizing the circular Hough transformation (CHT) our model is able to detect epicardial and endocardial contours of the left ventricle (LV) as circles automatically, and the circles are used as the initialization. In the cost functional of our model, the interior and exterior energies are weighted by the entropy to improve the robustness of the evolving curve. Local neighborhood information is used to evolve the level set function to reduce the impact of the heterogeneity inside the regions and to improve the segmentation accuracy. An adaptive window is utilized to reduce the sensitivity to initialization. The Gaussian kernel is used to regularize the level set function, which can not only ensure the smoothness and stability of the level set function, but also eliminate the traditional Euclidean length term and re-initialization. Extensive validation of the proposed method on patient data demonstrates its superior performance over other state-of-the-art methods.

Background It has been well established that theoretical kernel for recently surging genome-wide association study (GWAS) is statistical inference of linkage disequilibrium (LD) between a tested genetic marker and a putative locus affecting a disease trait. However, LD analysis is vulnerable to several confounding factors of which population stratification is the most prominent. Whilst many methods have been proposed to correct for the influence either through predicting the structure parameters or correcting inflation in the test statistic due to the stratification, these may not be feasible or may impose further statistical problems in practical implementation. Methodology We propose here a novel statistical method to control spurious LD in GWAS from population structure by incorporating a control marker into testing for significance of genetic association of a polymorphic marker with phenotypic variation of a complex trait. The method avoids the need of structure prediction which may be infeasible or inadequate in practice and accounts properly for a varying effect of population stratification on different regions of the genome under study. Utility and statistical properties of the new method were tested through an intensive computer simulation study and an association-based genome-wide mapping of expression quantitative trait loci in genetically divergent human populations. Results/Conclusions The analyses show that the new method confers an improved statistical power for detecting genuine genetic association in subpopulations and an effective control of spurious associations stemmed from population structure when compared with other two popularly implemented methods in the literature of GWAS.