Search

Reading primary research literature is an essential skill for all scientists and students on science degree programmes, however little is known about how researchers at different career stages interact with and interpret scientific papers. To explore this, we conducted a survey of 260 undergraduate students and researchers in Biological Sciences at a research intensive UK university. Responses to Likert scale questions demonstrated increases in confidence and skill with reading the literature between individuals at each career stage, including between postdoctoral researchers and faculty academics. The survey indicated that individuals at different career stages valued different sections of scientific papers, and skill in reading the results section develops slowly over the course of an academic career. Inexperienced readers found the methods and results sections of research papers the most difficult to read, and undervalued the importance of the results section and critical interpretation of data. These data highlight a need for structured support with reading scientific literature at multiple career stages, and for senior academics to be aware that junior colleagues may prioritise their reading differently. We propose a model for the development of literature processing skills, and consider the need for training strategies to help inexperienced readers engage with primary literature, and therefore develop important skills that underpin scientific careers. We also encourage researchers to be mindful of language used when writing papers, and to be more inclusive of diverse audiences when disseminating their work. [ABSTRACT FROM AUTHOR]

The present work was focused to design a cheap, rapid, portable and easy to use filter paper based assay for the qualitative and quantitate analysis of acetone. Sodium alginate gel was loaded with the acetone specific optical signal probe, and subsequently coated onto filter paper surface to design portable colorimetric assays for acetone monitoring. The color of the paper sensor strip was observed to change from dark yellow to light yellowish in the presence of varying concentrations of acetone. Three different color analyzing models including RGB, HSV, and LAB were employed to probe the output optical signal, and their performance was compared in terms of better interpretation of the generated signal. The LAB model was found to provide better analytical figures of merit with a linear response for the acetone concentration ranging from 2.5 to 1500 ppm, and a limit of detection of 0.5 ppm. Furthermore, the specificity of the designed filter paper based sensor was demonstrated against different common interfering compounds. The results demonstrated the potential of our proposed filter paper based sensor as a novel tool for the analysis of acetone. [ABSTRACT FROM AUTHOR]

The action required to stem the environmental and social implications of climate change depends crucially on how humankind shapes technology, economy, lifestyle and policy. With transport CO2 emissions accounting for about a quarter of the total, we examine the contribution of CO2 output by scientific travel. Thankfully for the reputation of the scientific community, CO2 emissions associated with the trips required to present a paper at a scientific conference account for just 0.003% of the yearly total. However, with CO2 emissions for a single conference trip amounting to 7% of an average individual’s total CO2 emissions, scientists should lead by example by demonstrating leadership in addressing the issue. [ABSTRACT FROM AUTHOR]

Poor research reporting is a major contributing factor to low study reproducibility, financial and animal waste. The ARRIVE (Animal Research: Reporting of In Vivo Experiments) guidelines were developed to improve reporting quality and many journals support these guidelines. The influence of this support is unknown. We hypothesized that papers published in journals supporting the ARRIVE guidelines would show improved reporting compared with those in non-supporting journals. In a retrospective, observational cohort study, papers from 5 ARRIVE supporting (SUPP) and 2 non-supporting (nonSUPP) journals, published before (2009) and 5 years after (2015) the ARRIVE guidelines, were selected. Adherence to the ARRIVE checklist of 20 items was independently evaluated by two reviewers and items assessed as fully, partially or not reported. Mean percentages of items reported were compared between journal types and years with an unequal variance t-test. Individual items and sub-items were compared with a chi-square test. From an initial cohort of 956, 236 papers were included: 120 from 2009 (SUPP; n = 52, nonSUPP; n = 68), 116 from 2015 (SUPP; n = 61, nonSUPP; n = 55). The percentage of fully reported items was similar between journal types in 2009 (SUPP: 55.3 ± 11.5% [SD]; nonSUPP: 51.8 ± 9.0%; p = 0.07, 95% CI of mean difference -0.3–7.3%) and 2015 (SUPP: 60.5 ± 11.2%; nonSUPP; 60.2 ± 10.0%; p = 0.89, 95%CI -3.6–4.2%). The small increase in fully reported items between years was similar for both journal types (p = 0.09, 95% CI -0.5–4.3%). No paper fully reported 100% of items on the ARRIVE checklist and measures associated with bias were poorly reported. These results suggest that journal support for the ARRIVE guidelines has not resulted in a meaningful improvement in reporting quality, contributing to ongoing waste in animal research. [ABSTRACT FROM AUTHOR]

Over the last few decades, the institutionalisation of quantitative research evaluations has created incentives for scholars to publish as many papers as possible. This paper assesses the effects of such incentives on individual researchers’ scientific impact, by analysing the relationship between their number of articles and their proportion of highly cited papers. In other words, does the share of an author’s top 1% most cited papers increase, remain stable, or decrease as his/her total number of papers increase? Using a large dataset of disambiguated researchers (N = 28,078,476) over the 1980–2013 period, this paper shows that, on average, the higher the number of papers a researcher publishes, the higher the proportion of these papers are amongst the most cited. This relationship is stronger for older cohorts of researchers, while decreasing returns to scale are observed for recent cohorts. On the whole, these results suggest that for established researchers, the strategy of publishing as many papers as possible did not yield lower shares of highly cited publications, but such a pattern is not always observed for younger scholars. [ABSTRACT FROM AUTHOR]

Aims: To evaluate the relative efficiencies of five Internet-based digital and three paper-based scientific surveys and to estimate the costs for different-sized cohorts. Methods: Invitations to participate in a survey were distributed via e-mail to employees of two university hospitals (E1 and E2) and to members of a medical association (E3), as a link placed in a special text on the municipal homepage regularly read by the administrative employees of two cities (H1 and H2), and paper-based to workers at an automobile enterprise (P1) and college (P2) and senior (P3) students. The main parameters analyzed included the numbers of invited and actual participants, and the time and cost to complete the survey. Statistical analysis was descriptive, except for the Kruskal-Wallis-H-test, which was used to compare the three recruitment methods. Cost efficiencies were compared and extrapolated to different-sized cohorts. Results: The ratios of completely answered questionnaires to distributed questionnaires were between 81.5% (E1) and 97.4% (P2). Between 6.4% (P1) and 57.0% (P2) of the invited participants completely answered the questionnaires. The costs per completely answered questionnaire were $0.57–$1.41 (E1–3), $1.70 and $0.80 for H1 and H2, respectively, and $3.36–$4.21 (P1–3). Based on our results, electronic surveys with 10, 20, 30, or 42 questions would be estimated to be most cost (and time) efficient if more than 101.6–225.9 (128.2–391.7), 139.8–229.2 (93.8–193.6), 165.8–230.6 (68.7–115.7), or 188.2–231.5 (44.4–72.7) participants were required, respectively. Conclusions: The study efficiency depended on the technical modalities of the survey methods and engagement of the participants. Depending on our study design, our results suggest that in similar projects that will certainly have more than two to three hundred required participants, the most efficient way of conducting a questionnaire-based survey is likely via the Internet with a digital questionnaire, specifically via a centralized e-mail. [ABSTRACT FROM AUTHOR]

Scientists often perceive a trade-off between quantity and quality in scientific publishing: finite amounts of time and effort can be spent to produce few high-quality papers or subdivided to produce many papers of lower quality. Despite this perception, previous studies have indicated the opposite relationship, in which productivity (publishing more papers) is associated with increased paper quality (usually measured by citation accumulation). We examine this question in a novel way, comparing members of the National Academy of Sciences with themselves across years, and using a much larger dataset than previously analyzed. We find that a member’s most highly cited paper in a given year has more citations in more productive years than in in less productive years. Their lowest cited paper each year, on the other hand, has fewer citations in more productive years. To disentangle the effect of the underlying distributions of citations and productivities, we repeat the analysis for hypothetical publication records generated by scrambling each author’s citation counts among their publications. Surprisingly, these artificial histories re-create the above trends almost exactly. Put another way, the observed positive relationship between quantity and quality can be interpreted as a consequence of randomly drawing citation counts for each publication: more productive years yield higher-cited papers because they have more chances to draw a large value. This suggests that citation counts, and the rewards that have come to be associated with them, may be more stochastic than previously appreciated. [ABSTRACT FROM AUTHOR]

The challenge of detecting research topics in a specific research field has attracted attention from researchers in the bibliometrics community. In this study, to solve two problems of clustering papers, i.e., the influence of different distributions of citation links and involved textual features on similarity computation, the authors propose a hybrid self-optimized clustering model to detect research topics by extending the hybrid clustering model to identify “core documents”. First, the Amsler network, consisting of bibliographic coupling and co-citation links, is created to calculate the citation-based similarity based on the cosine angle of papers. Second, the cosine similarity is also used to compute the text-based similarity, which consists of the textual statistical and topological features. Then, the cosine angle of the linear combination of citation- and text-based similarity is considered as the hybrid similarity. Finally, the Louvain method is applied to cluster papers, and the terms based on term frequency are used to label clusters. To test the performance of the proposed model, a dataset related to the data envelopment analysis field is used for comparison and analysis of clustering results. Based on the benchmark built, different clustering methods with different citation links or textual features are compared according to evaluation measures. The results show that the proposed model can obtain reasonable and effective clustering results, and the research topics of data envelopment analysis field are also analyzed based on the proposed model. As different features are considered in the proposed model compared with previous hybrid clustering models, the proposed clustering model can provide inspiration for further studies on topic identification by other researchers. [ABSTRACT FROM AUTHOR]

Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers. [ABSTRACT FROM AUTHOR]

Although interdisciplinarity is often touted as a necessity for modern research, the evidence on the relative impact of sectorial versus to interdisciplinary science is qualitative at best. In this paper we leverage the bibliographic data set of the American Physical Society to quantify the role of interdisciplinarity in physics, and that of talent and luck in achieving success in scientific careers. We analyze a period of 30 years (1980-2009) tagging papers and their authors by means of the Physics and Astronomy Classification Scheme (PACS), to show that some degree of interdisciplinarity is quite helpful to reach success, measured as a proxy of either the number of articles or the citations score. We also propose an agent-based model of the publication-reputation-citation dynamics which reproduces the trends observed in the APS data set. On the one hand, the results highlight the crucial role of randomness and serendipity in real scientific research; on the other, they shed light on a counterintuitive effect indicating that the most talented authors are not necessarily the most successful ones. [ABSTRACT FROM AUTHOR]

Scholars (n = 580) from 69 countries who had contributed articles in the field of Economics during the year 2015 participated in a survey that gauged their perceptions of various aspects of co-authorship, including its benefits, motivations, working relationships, order of authorship and association preferences. Among the main findings, significant differences emerged in the proportion of co-authored papers based on age, gender and number of years the researchers had spent in their present institution. Female scholars had a greater proportion of co-authored papers than male scholars. Respondents considered improved quality of paper, contribution of mutual expertise, and division of labor as the biggest benefits of and motivation for co-authorship. Contrary to common perceptions that Economics researchers used a predominantly alphabetical order of authorship, our study found that a considerable percentage of respondents (34.5%) had practiced an order of authorship based on the significance of the authors’ contribution to the work. The relative importance of tasks differed significantly according to whether researchers co-authored as mentors or co-authored as colleagues. Lastly, researchers were found to associate, to varying degrees, with other researchers based on socio-academic parameters, such as nationality, ethnicity, gender, professional position and friendship. The study indicates that Economics authors perceive co-authorship as a rewarding endeavor. Nonetheless, the level of contribution and even the choice of association itself as a co-author depends to a great extent on the type of working relationship and socio-academic factors. [ABSTRACT FROM AUTHOR]

Background: In economic analyses of HIV interventions, South Africa is often used as a case in point, due to the availability of good epidemiological and programme data and the global relevance of its epidemic. Few analyses however use locally relevant cost data. We reviewed available cost data as part of the South African HIV Investment Case, a modelling exercise to inform the optimal use of financial resources for the country’s HIV programme. Methods: We systematically reviewed publication databases for published cost data covering a large range of HIV interventions and summarised relevant unit costs (cost per person receiving a service) for each. Where no data was found in the literature, we constructed unit costs either based on available information regarding ingredients and relevant public-sector prices, or based on expenditure records. Results: Only 42 (5%) of 1,047 records included in our full-text review reported primary cost data on HIV interventions in South Africa, with 71% of included papers covering ART. Other papers detailed the costs of HCT, MMC, palliative and inpatient care; no papers were found on the costs of PrEP, social and behaviour change communication, and PMTCT. The results informed unit costs for 5 of 11 intervention categories included in the Investment Case, with the remainder costed based on ingredients (35%) and expenditure data (10%). Conclusions: A large number of modelled economic analyses of HIV interventions in South Africa use as inputs the same, often outdated, cost analyses, without reference to additional literature review. More primary cost analyses of non-ART interventions are needed. [ABSTRACT FROM AUTHOR]

Debates over the pros and cons of a “publish or perish” philosophy have inflamed academia for at least half a century. Growing concerns, in particular, are expressed for policies that reward “quantity” at the expense of “quality,” because these might prompt scientists to unduly multiply their publications by fractioning (“salami slicing”), duplicating, rushing, simplifying, or even fabricating their results. To assess the reasonableness of these concerns, we analyzed publication patterns of over 40,000 researchers that, between the years 1900 and 2013, have published two or more papers within 15 years, in any of the disciplines covered by the Web of Science. The total number of papers published by researchers during their early career period (first fifteen years) has increased in recent decades, but so has their average number of co-authors. If we take the latter factor into account, by measuring productivity fractionally or by only counting papers published as first author, we observe no increase in productivity throughout the century. Even after the 1980s, adjusted productivity has not increased for most disciplines and countries. These results are robust to methodological choices and are actually conservative with respect to the hypothesis that publication rates are growing. Therefore, the widespread belief that pressures to publish are causing the scientific literature to be flooded with salami-sliced, trivial, incomplete, duplicated, plagiarized and false results is likely to be incorrect or at least exaggerated. [ABSTRACT FROM AUTHOR]

It is often argued that female researchers publish on average less than male researchers do, but male and female authored papers have an equal impact. In this paper we try to better understand this phenomenon by (i) comparing the share of male and female researchers within different productivity classes, and (ii) by comparing productivity whereas controlling for a series of relevant covariates. The study is based on a disambiguated Swedish author dataset, consisting of 47,000 researchers and their WoS-publications during the period of 2008-2011 with citations until 2015. As the analysis shows, in order to have impact quantity does make a difference for male and female researchers alike—but women are vastly underrepresented in the group of most productive researchers. We discuss and test several possible explanations of this finding, using a data on personal characteristics from several Swedish universities. Gender differences in age, authorship position, and academic rank do explain quite a part of the productivity differences. [ABSTRACT FROM AUTHOR]

We used a retrospective cohort study to measure the impact of caring for children on female Australian researchers. Our aim was to see whether caring for children was associated with reduced outputs and collaboration. Women were randomly selected for inclusion if they published a first author paper in one of three Australian journals during 2007 to 2015, women who did not publish during this time were not included. One-hundred and sixty women were approached and 95 (59%) completed a survey on their history of caring for children. Two key outcomes were the women's publication and citation counts, which were accessed from Scopus. We also examined the number of authors, affiliations and countries on their published papers, as a reduction in these numbers could indicate an impaired ability to collaborate. We examined the probability of being first or last author as a measure of esteem. There was a small increase in publication counts after the first child that was reversed after the second child. Average citations counts declined after children, particularly after the second child. There was some evidence of a reduced collaboration with overseas collaborators after the first child. The probability of being the last author increased after the second child. Three women were identified as statistically influential and all three had children and were in the top 10% of overall publications and citations. After removing these women the estimated changes in outcomes were noticeably different for most of the outcomes. The repeated presence of statistically influential women shows that it may be impossible to find an "average impact" of caring for children when considering research output. Adjustments may need to be made individually, with women explaining how caring for children has altered their career. [ABSTRACT FROM AUTHOR]

Recently, computational Grids have proven to be a good solution for processing large-scale, computation intensive problems. However, the heterogeneity, dynamics of resources and diversity of applications requirements have always been important factors affecting their performance. In response to these challenges, this work first builds a Grid job scheduling architecture that can dynamically monitor Grid computing center resources and make corresponding scheduling decisions. Second, a Grid job model is proposed to describe the application requirements. Third, this paper studies the characteristics of commercial interconnection networks used in Grids and forecast job transmission time. Fourth, this paper proposes an application-aware job scheduling mechanism (AJSM) that includes periodic scheduling flow and a heuristic application-aware deadline constraint job scheduling algorithm. The rigorous performance evaluation results clearly demonstrate that the proposed application-aware job scheduling mechanism can successful schedule more Grid jobs than the existing algorithms. For successful scheduled jobs, our proposed AJSM method is the best algorithm for job average processing time and makespan. [ABSTRACT FROM AUTHOR]

Anecdotes abound regarding the decline of basic research in industrial and governmental settings, but very little empirical evidence exists about the phenomenon. This article provides a systematic and historical analysis of the contribution of various institutional sectors to knowledge production at the world and country levels across the past four decades. It highlights a dramatic decline in the diffusion of basic research by industrial and governmental sectors across all countries—with a corresponding increase in the share from universities—as well as an increase of partnerships between universities and other sectors. Results also shows an increase in the relative share of industries in applied research, as measured through patents. Such divergence in university and industry research activities may hinder industries’ ability to translate basic knowledge into technological innovation, and could lead to a growing misalignment between doctoral training and future job expectations. Industries and universities must rethink strategies for partnerships and publishing to maximize scientific progress and to ensure the greatest gains for society. [ABSTRACT FROM AUTHOR]

National contributions to science are influenced by a number of factors, including economic capacity, national scientific priorities, science policy, and institutional settings and cultures. Nations do not have equal opportunities to access the global scientific market, and therefore, often seek out international partners with complementary resources and expertise. This study aims at investigating national collaboration strategies, with a focus on research leadership—measured through corresponding authorship—and its relationship with scientific impact. Results show that countries with higher R&D investments are more scientifically independent, and confirm that international collaboration is positively related to citation impact. However, leadership in international collaboration is inversely related with a countries’ share of international collaboration and there is a very little relationship between citation impact and international leadership. For instance, most countries—and particularly those that have fewer resources—have higher scientific impact when they are not leading. This suggests that, despite increasing global participation in science, most international collaborations are asymmetrical, and that the research system remains structured around a few dominate nations. [ABSTRACT FROM AUTHOR]

This paper aims to demonstrate the impact of coal enterprises’ vertical integration on the performance of innovation corporate social responsibility (ICSR) and to elaborate its specific transmission path through financing structure and market power. This paper takes the data of A-share listed coal company from 2008 to 2017 as samples, uses input-output table method to measure the degree of vertical integration, and explores the relationship between the four factors through multiple linear regression and Bootstrap method. We found that: (1) the vertical integration of coal enterprises has positive incentives for the promotion of ICSR. (2) Financing structure and market power play a chain intermediary role in this process of incentive. (3) In areas with high marketization process, vertical integration has more significant incentive effect on ICSR. The paper extends the research on the relationship between vertical integration and innovation, which provides a reference for the improvement of China’s supply-side reform and corporate social responsibility (CSR) fulfillment policy. It is helpful to promote the sustainable development of the coal industry, stimulate the innovation vitality of enterprises, and improve the fulfillment of CSR. [ABSTRACT FROM AUTHOR]

Bibliometric indicators are increasingly used to evaluate individual scientists–as is exemplified by the popularity of the many other publication and citation-based indicators used in evaluation. These indicators, however, cover at best some of the quality dimensions relevant for assessing a researcher: productivity and impact. At the same time, research quality has more dimensions than productivity and impact alone. As current bibliometric indicators are not covering various important quality dimensions, we here contribute to developing better indicators for those quality dimensions not yet addressed. One of the quality dimensions lacking valid indicators is an individual researcher’s independence. We propose indicators to measure different aspects of independence: two assessing whether a researcher has developed an own collaboration network and two others assessing the level of thematic independence. Taken together they form an independence indicator. We illustrate how these indicators distinguish between researchers that are equally productive and have a considerable impact. The independence indicator is a step forward in evaluating individual scholarly quality. [ABSTRACT FROM AUTHOR]

Discrete choice experiments (DCEs) are a way to assess priority-setting in health care provision. This approach allows for the evaluation of individuals’ preferences as a means of adding criteria to traditional quality-adjusted life year analysis. The aim of this systematic literature review was to identify attributes for designing a DCE in order to then develop and validate a framework that supports decision-making on health technologies. Our systematic literature review replicated the methods and search terms used by de Bekker-Grob et al. 2012 and Clark et al. 2014. The Medline database was searched for articles dated between 2008 and 2015. The search was limited to studies in English that reflected general preferences and were choice-based, published as full-text articles and related to health technologies. This study included 72 papers, 52% of which focused on DCEs on drug treatments. The average number of attributes used in all included DCE studies was 5.74 (SD 1.98). The most frequently used attributes in these DCEs were improvements in health (78%), side effects (57%) and cost of treatment (53%). Other, less frequently used attributes included waiting time for treatment or duration of treatment (25%), severity of disease (7%) and value for money (4%). The attributes identified might inform future DCE surveys designed to study societal preferences regarding health technologies in order to better inform decisions in health technology assessment. [ABSTRACT FROM AUTHOR]

Quality circles or peer review groups, and similar structured small groups of 6–12 health care professionals meet regularly across Europe to reflect on and improve their standard practice. There is debate over their effectiveness in primary health care, especially over their potential to change practitioners’ behaviour. Despite their popularity, we could not identify broad surveys of the literature on quality circles in a primary care context. Our scoping review was intended to identify possible definitions of quality circles, their origins, and reported effectiveness in primary health care, and to identify gaps in our knowledge. We searched appropriate databases and included any relevant paper on quality circles published until December 2017. We then compared information we found in the articles to that we found in books and on websites. Our search returned 7824 citations, from which we identified 82 background papers and 58 papers about quality circles. We found that they originated in manufacturing industry and that many countries adopted them for primary health care to continuously improve medical education, professional development, and quality of care. Quality circles are not standardized and their techniques are complex. We identified 19 papers that described individual studies, one paper that summarized 3 studies, and 1 systematic review that suggested that quality circles can effectively change behaviour, though effect sizes varied, depending on topic and context. Studies also suggested participation may affirm self-esteem and increase professional confidence. Because reports of the effect of quality circles on behaviour are variable, we recommend theory-driven research approaches to analyse and improve the effectiveness of this complex intervention. [ABSTRACT FROM AUTHOR]

Explicit model predictive control (eMPC) has been proposed to reduce the huge computational complexity of MPC while maintaining the performance of MPC. Therefore, this control method has been more widely employed in the automotive industry than MPC. In this paper, an eMPC is designed to perform a double-lane-change (DLC) maneuver. This task has been employed to demonstrate the efficacy of controllers in an autonomous driving situation. In this sense, the proposed controller shows better performance than a driver model designed in CarSim at a high vehicle longitudinal velocity. The main contribution of this paper is to present an eMPC for discrete-time linear time-variant (LTV) systems so that the proposed controller can be robust against parameter variation. In a state-space representation of the vehicle, the longitudinal velocity of the vehicle is assumed to be a constant so that the whole system is linear time-invariant (LTI). However, it is inevitable that this velocity varies in an actual driving situation. Therefore, an eMPC controller is designed using an add-on unit to consider the varying parameter without modification of the eMPC solution. The CarSim simulation results of eMPC show enhanced performance compared to that of eMPC for the LTI system. [ABSTRACT FROM AUTHOR]

Motivation and method: Existing rational expectations models cannot satisfactorily explain why political budget manipulations systematically raise re-election chances and only occur in “specific contexts”. This paper offers a theoretical explanation by including unsophisticated voters into an opportunistic political cycle model; unsophisticated voters are unable to take the optimal behaviour of other agents (fully) into account, but may, nonetheless, vaguely suspect government deception. Results: First, rationally expected manipulations are, on average, fruitless in equilibrium. By including unsophisticated voters we can, however, corroborate empirically found electoral effects of political budget manipulations. Second, unsophisticated voters become anxious and suspicious in an intransparent or uncertain world, but the government tries to “outperform” their scepticism by increasing budget manipulations in order to appear more competent and, ultimately, increase re-election chances. It is, therefore, not surprising that political budget cycles are observed in countries suffering from intransparencies such as developing countries or new democracies. Third and in addition, the model presented here predicts that political opportunism produces, unintentionally, a countercyclical policy effect in election years, thereby, for instance, alleviating the typical problem of policy procyclicality in developing countries. Additional contribution: The paper also offers a theoretical explanation for political distortions found in forecasts by US states. Based on overly optimistic revenue forecasts the incumbent state government can conduct expansionary fiscal policies in order to appear more competent prior to an upcoming election. Since the resulting deficit can only be observed afterwards, the government can effectively circumvent a constitutional balanced budget constraint. As a result, there are political forecast and budget cycles in the state. More generally, however, these findings may also apply to European countries where balanced budget constraints are or will be in place (for instance the debt brakes in Switzerland and Germany); similarly, they apply to the supra-national European Fiscal Compact of the European Union. [ABSTRACT FROM AUTHOR]

It was recently reported that men self-cite >50% more often than women across a wide variety of disciplines in the bibliographic database JSTOR. Here, we replicate this finding in a sample of 1.6 million papers from Author-ity, a version of PubMed with computationally disambiguated author names. More importantly, we show that the gender effect largely disappears when accounting for prior publication count in a multidimensional statistical model. Gender has the weakest effect on the probability of self-citation among an extensive set of features tested, including byline position, affiliation, ethnicity, collaboration size, time lag, subject-matter novelty, reference/citation counts, publication type, language, and venue. We find that self-citation is the hallmark of productive authors, of any gender, who cite their novel journal publications early and in similar venues, and more often cross citation-barriers such as language and indexing. As a result, papers by authors with short, disrupted, or diverse careers miss out on the initial boost in visibility gained from self-citations. Our data further suggest that this disproportionately affects women because of attrition and not because of disciplinary under-specialization. [ABSTRACT FROM AUTHOR]

This paper focuses on evaluating the systemic risk in interbank networks, proposing a series of measurements: risk distance, risk degree and m-order risk degree. The proposed measurements are formally proven to have good basic and extended properties that are able to reflect the effect of bank size, liability size, liability distribution, and the discount factor on the default risk, not only of a single bank, but also of the entire system. Additionally, the abovementioned properties and the relationship between risk distance and financial contagion indicate the rationality embodied in the proposed measurements. This paper also provides some implications on how to decrease or prevent the systemic risk in an interbank system. [ABSTRACT FROM AUTHOR]

This paper presents a formulation for selecting the stage ratios and number of stages in a multistage transmission with a given desired total transmission ratio in a manner that maximizes efficiency, maximizes acceleration, or minimizes the mass of the transmission. The formulation is used to highlight several implications for gear train design, including the fact that minimizing rotational inertia and mass are competing objectives with respect to optimal selection of stage ratios, and that both rotational inertia and mass can often be minimized by increasing the total number of stages beyond a minimum realizable number. Additionally, a multistage transmission will generally provide maximum acceleration when the stage ratios increase monotonically from the motor to the load. The transmission will have minimum mass when the stage ratios decrease monotonically. The transmission will also provide maximum efficiency when the corresponding stages employ constant stage ratios. This paper aims to use this optimization formulation to elucidate tradeoffs between various common objectives in gear train design (efficiency, acceleration, and mass). [ABSTRACT FROM AUTHOR]

The paper generally builds on the concept of justice in social science. It attempts to interpret this concept in a geographical and particularly in a spatial context. The paper uses the concept of accessibility to define the principle of spatial equity. The main objective of the paper is to propose an approach with which to assess the level of spatial equity in the administrative division of a territory. In order to fulfil this objective the paper theoretically discusses the concept of spatial equity and relates it to other relevant concepts, such as spatial efficiency. The paper proposes some measures of spatial equity and uses the territory of four Central European countries (Austria, the Czech Republic, Hungary, Slovakia) as example of the application of the proposed measures and the corroboration of the proposed approach. The analysis is based on the administrative division of four countries and is carried out at different hierarchical levels as defined by the Nomenclature of Units for Territorial Statistics (NUTS). [ABSTRACT FROM AUTHOR]

Objective: To conduct a time-cost analysis of formatting in scientific publishing. Design: International, cross-sectional study (one-time survey). Setting: Internet-based self-report survey, live between September 2018 and January 2019. Participants: Anyone working in research, science, or academia and who submitted at least one peer-reviewed manuscript for consideration for publication in 2017. Completed surveys were available for 372 participants from 41 countries (60% of respondents were from Canada). Main outcome measure: Time (hours) and cost (wage per hour x time) associated with formatting a research paper for publication in a peer-reviewed academic journal. Results: The median annual income category was US$61,000–80,999, and the median number of publications formatted per year was four. Manuscripts required a median of two attempts before they were accepted for publication. The median formatting time was 14 hours per manuscript, or 52 hours per person, per year. This resulted in a median calculated cost of US$477 per manuscript or US$1,908 per person, per year. Conclusions: To our knowledge, this is the first study to analyze the cost of manuscript formatting in scientific publishing. Our results suggest that scientific formatting represents a loss of 52 hours, costing the equivalent of US$1,908 per researcher per year. These results identify the hidden and pernicious price associated with scientific publishing and provide evidence to advocate for the elimination of strict formatting guidelines, at least prior to acceptance. [ABSTRACT FROM AUTHOR]

Background: Type 2 diabetes mellitus (T2DM) is an established risk factor for cardiovascular and nephropathic events. In the Netherlands, prevalence of T2DM is expected to be as high as 8% by 2025. This will result in significant clinical and economic impact, highlighting the need for well-informed reimbursement decisions for new treatments. However, availability and consistent use of costing methodologies is limited. Objective: We aimed to systematically review recent costing data for T2DM-related cardiovascular and nephropathic events in the Netherlands. Methods: A systematic literature review in PubMed and Embase was conducted to identify available Dutch cost data for T2DM-related events, published in the last decade. Information extracted included costs, source, study population, and costing perspective. Finally, papers were evaluated using the Consolidated Health Economic Evaluation Reporting Standards (CHEERS). Results: Out of initially 570 papers, 36 agreed with the inclusion criteria. From these studies, 150 cost estimates for T2DM-related clinical events were identified. In total, 29 cost estimates were reported for myocardial infarction (range: €196-€27,038), 61 for stroke (€495-€54,678), fifteen for heart failure (€325-€16,561), 24 for renal failure (€2,438-€91,503), and seventeen for revascularisation (€3,000-€37,071). Only four estimates for transient ischaemic attack were available, ranging from €587 to €2,470. Adherence to CHEERS was generally high. Conclusions: The most expensive clinical events were related to renal failure, while TIA was the least expensive event. Generally, there was substantial variation in reported cost estimates for T2DM-related events. Costing of clinical events should be improved and preferably standardised, as accurate and consistent results in economic models are desired. [ABSTRACT FROM AUTHOR]

Classifying bank accounts by using transaction data is encouraging in cracking down on illegal financial activities. However, few research simultaneously use heterogenous features, which are embedded in the time series data. In this paper, a two route convolution neural network TRHD-CNN model, fed with two types of heterogeneous feature matrices, is proposed for classifying the bank accounts. TRHD-CNN adopts divide and conquer strategy to extract characteristics from two types of data source independently. The strategy is proved able in mining complementary classification characteristics. We firstly transfer the original log data into a directed and dynamic transaction network. On the basis of that, two feature generation methods are devised for extracting information from local topological structure and time series transaction respectively. A DirectedWalk method is developed in this paper to learning the network vector of vertices used for embedding the neighbor relationship of bank account. The extensive experimental results, conducted on a real bank transaction dataset that contains illegal pyramid selling accounts, show the significant advantage of TRHD-CNN over the existing methods. TRHD-CNN can provide recall scores up to 5.15% higher than competing methods. In addition, the two-route architecture of TRHD-CNN is easy to extend to multi-route scenarios and other fields. [ABSTRACT FROM AUTHOR]

Background: Floating catchment methods have recently been applied to identify priority regions for Automated External Defibrillator (AED) deployment, to aid in improving Out of Hospital Cardiac Arrest (OHCA) survival. This approach models access as a supply-to-demand ratio for each area, targeting areas with high demand and low supply for AED placement. These methods incorporate spatial covariates on OHCA occurrence, but do not provide precise AED locations, which are critical to the initial intent of such location analysis research. Exact AED locations can be determined using optimisation methods, but they do not incorporate known spatial risk factors for OHCA, such as income and demographics. Combining these two approaches would evaluate AED placement impact, describe drivers of OHCA occurrence, and identify areas that may not be appropriately covered by AED placement strategies. There are two aims in this paper. First, to develop geospatial models of OHCA that account for and display uncertainty. Second, to evaluate the AED placement methods using geospatial models of accessibility. We first identify communities with the greatest gap between demand and supply for allocating AEDs. We then use this information to evaluate models for precise AED location deployment. Methods: Case study data set consisted of 2802 OHCA events and 719 AEDs. Spatial OHCA occurrence was described using a geospatial model, with possible spatial correlation accommodated by introducing a conditional autoregressive (CAR) prior on the municipality-level spatial random effect. This model was fit with Integrated Nested Laplacian Approximation (INLA), using covariates for population density, proportion male, proportion over 65 years, financial strength, and the proportion of land used for transport, commercial, buildings, recreation, and urban areas. Optimisation methods for AED locations were applied to find the top 100 AED placement locations. AED access was calculated for current access and 100 AED placements. Priority rankings were then given for each area based on their access score and predicted number of OHCA events. Results: Of the 2802 OHCA events, 64.28% occurred in rural areas, and 35.72% in urban areas. Additionally, over 70% of individuals were aged over 65. Supply of AEDs was less than demand in most areas. Priority regions for AED placement were identified, and access scores were evaluated for AED placement methodology by ranking the access scores and the predicted OHCA count. AED placement methodology placed AEDs in areas with the highest priority, but placed more AEDs in areas with more predicted OHCA events in each grid cell. Conclusion: The methods in this paper incorporate OHCA spatial risk factors and OHCA coverage to identify spatial regions most in need of resources. These methods can be used to help understand how AED allocation methods affect OHCA accessibility, which is of significant practical value for communities when deciding AED placements. [ABSTRACT FROM AUTHOR]

In this paper, we aim to establish a mathematical model to design a maximizing social welfare intervention mechanism of healthcare service goods in China. The intervention mechanism is helpful to facilitate the adoption of the healthcare service goods. We consider a research problem that regulates the supply chain system for healthcare service goods by an intervention mechanism, and two intervention strategies composed of demand-growth strategy and subsidy strategy are used to the combination of intervention mechanism. Then this paper presents a new method based on fuzzy set and bilevel programming to design the intervention mechanism. To demonstrate the effectiveness of the proposed model, we conduct a case study for Wudang personalized health package and verify our model by the specific result analysis, the result indicates that our joint intervention mechanism is helpful to achieve the target and increase social welfare. [ABSTRACT FROM AUTHOR]

Introduction: Community nursing and midwifery is changing in response to a shift in care from hospital to home, brought about by increasing costs to care because of an aging population and increasing chronicity. Until now, community nursing positions and scope of practice has been dependent on service focus and location, which has led to the role being unclearly defined. Lack of appeal for a career in community practice and a looming workforce shortage necessitates a review into how community nursing and midwifery transition to practice is supported. Methods: This review sought to identify, assess and summarize available evidence relating to transitioning into community nursing and midwifery practice as a speciality. A systematic review was conducted using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses approach. A narrative synthesis was then undertaken on papers that examined community nursing and midwifery pathway perspectives which define, and enable or inhibit a contemporary pathway. Thematic analysis used a theoretical framework developed for early career and rapid transition to nursing specialty practice. Results: There is a paucity of research that identifies community nursing and midwifery as a discreet scope of practice. Twelve papers were eventually included in the review. Verbatim findings were extracted from the papers and clustered into categories based on the chosen theoretical framework. Major themes were ‘the self’ (professional and personal); ‘transition processes’; and, a ‘sense of belonging’. Sub themes included narrative identifying inhibitors and enablers in each theme. Discussion: No definition of community practice or pathway was identified in nursing, although midwifery was clearly defined. Community nursing practice was described as generalist in nature although specialist knowledge is required. Being part of the community in the professional sense and personal sense was considered important. The importance of transition was identified where pre-entry exposure to community practice was seen as important. Stages in transition to practice were recognised as pre-entry; incomer; insider; and, a sense of belonging. The process of transition should be planned and individualised acknowledging past experience whilst acknowledging the specialist nature of community-based practice. [ABSTRACT FROM AUTHOR]

To solve the problem of the deadline-constrained task scheduling in the cloud computing system, this paper proposes a deadline-constrained scheduling algorithm for cloud computing based on the driver of dynamic essential path (Deadline-DDEP). According to the changes of the dynamic essential path of each task node in the scheduling process, the dynamic sub-deadline strategy is proposed. The strategy assigns different sub-deadline values to every task node to meet the constraint relations among task nodes and the user’s defined deadline. The strategy fully considers the dynamic sub-deadline affected by the dynamic essential path of task node in the scheduling process. The paper proposed the quality assessment of optimization cost strategy to solve the problem of selecting server for each task node. Based on the sub-deadline urgency and the relative execution cost in the scheduling process, the strategy selects the server that not only meets the sub-deadline but also obtains much lower execution cost. In this way, the proposed algorithm will make the task graph complete within its deadline, and minimize its total execution cost. Finally, we demonstrate the proposed algorithm via the simulation experiments using Matlab tools. The experimental results show that, the proposed algorithm produces remarkable performance improvement rate on the total execution cost that ranges between 10.3% and 30.8% under meeting the deadline constraint. In view of the experimental results, the proposed algorithm provides better-quality scheduling solution that is suitable for scientific application task execution in the cloud computing environment than IC-PCP, DCCP and CD-PCP. [ABSTRACT FROM AUTHOR]

In this paper, we propose a spatial lag panel smoothing transition regression (SLPSTR) model ty considering spatial correlation of dependent variable in panel smooth transition regression model. This model combines advantages of both smooth transition model and spatial econometric model and can be used to deal with panel data with wide range of heterogeneity and cross-section correlation simultaneously. We also propose a Bayesian estimation approach in which the Metropolis-Hastings algorithm and the method of Gibbs are used for sampling design for SLPSTR model. A simulation study and a real data study are conducted to investigate the performance of the proposed model and the Bayesian estimation approach in practice. The results indicate that our theoretical method is applicable to spatial data with a wide range of spatial structures under finite sample. [ABSTRACT FROM AUTHOR]

This paper re-examines health-growth relationship using an unbalanced panel of 17 advanced economies for the period 1870–2013 and employs panel generalised method of moments estimator that takes care of endogeneity issues, which arise due to reverse causality. We utilise macroeconomic data corresponding to inflation, government expenditure, trade and schooling in sample countries that takes care of omitted variable bias in growth regression. With alternate model specifications, we show that population health proxied by life expectancy exert a positive and significant effect on both real income per capita as well as growth. Our results are in conformity with the existing empirical evidence on the relationship between health and economic growth, they, however, are more robust due to the presence of long-term data, appropriate econometric procedure and alternate model specifications. We also show a strong role of endogeneity in driving standard results in growth empirics. In addition to life expectancy, other constituent of human capital, education proxied by schooling is also positively associated with real per capita income. Policy implication that follows from this paper is that per capita income can be boosted through focussed policy attention on population health. The results, however, posit differing policy implications for advanced and developing economies. [ABSTRACT FROM AUTHOR]

Several technical indicators have been proposed to assess the impact of authors and institutions. Here, we combine the h-index and the PageRank algorithm to do away with some of the individual limitations of these two indices. Most importantly, we aim to take into account value differences between citations-evaluating the citation sources by defining the h-index using the PageRank score rather than with citations. The resulting PR-index is then constructed by evaluating source popularity as well as the source publication authority. Extensive tests on available collections data (i.e., Microsoft Academic Search and benchmarks on the SIGKDD innovation award) show that the PR-index provides a more balanced impact measure than many existing indices. Due to its simplicity and similarity to the popular h-index, the PR-index may thus become a welcome addition to the technical indices already in use. Moreover, growth dynamics prior to the SIGKDD innovation award indicate that the PR-index might have notable predictive power. [ABSTRACT FROM AUTHOR]

Setting: Research capacity is weakest in low and middle-income countries (LMICs) where operational research is highly relevant and needed. Structured Operational Research and Training Initiative (SORT IT) courses have been developed to train participants to conduct and publish operational research and influence policy and practice. Twenty courses were completed in Asia, Africa, Europe and the South Pacific between 2009 and 2014. Objectives: In the 20 completed SORT IT courses, to assess where the research was conducted, who was trained, who became facilitators in subsequent courses and course outcomes. Design: A cohort study of completed SORT IT courses Results: There were 236 participants (41% female) including 64 nationalities who conducted research in 59 countries, mostly from Asia and Africa (mean course duration = 9.7 months). Most participants (68%) were from government health programs and non-governmental agencies. A total of 213(90%) participants completed all milestones successfully with 41(19%) becoming subsequent course facilitators, 88% of whom were from LMICs. Of 228 manuscripts submitted to scientific journals, 197(86%) were either published or in press; in 86%, the principal investigator (first author) was a LMIC national. Papers were published in 23 scientific journals (impact factor 0.5–4.4) and covered 21 disease categories (median publication time = 5.7 months). Published papers (186) had 94,794 cumulative article views/downloads. Article views/downloads for immediate open access articles were double those from closed access journals. Conclusion: The SORT IT model has been effective in training personnel to produce relevant operational research in LMICs. It merits continued commitment and support for further scale-up and development. [ABSTRACT FROM AUTHOR]

Since the 1950s, the number of doctorate recipients has risen dramatically in the United States. In this paper, we investigate whether the longevity of doctorate recipients’ publication careers has changed. This is achieved by matching 1951–2010 doctorate recipients with rare names in astrophysics, chemistry, economics, genetics and psychology in the dissertation database ProQuest to their publications in the publication database Web of Science. Our study shows that pre-PhD publication careers have changed: the median year of first publication has shifted from after the PhD to several years before PhD in most of the studied fields. In contrast, post-PhD publication career spans have not changed much in most fields. The share of doctorate recipients who have published for more than twenty years has remained stable over time; the shares of doctorate recipients publishing for shorter periods also remained almost unchanged. Thus, though there have been changes in pre-PhD publication careers, post-PhD career spans remained quite stable. [ABSTRACT FROM AUTHOR]

This paper investigates institutional change in the Polish public science system (PPSS) in the past twenty years. Employing macro-statistical data, the paper argues that this change process has unfolded stepwise and relatively late despite major political and economic transformations in post-socialist Poland. Using a historical-institutionalist perspective, the paper focuses on processes of institutional change, including layering, displacement, and dismantling. One major finding is that the speed and depth of the gradual transformation differs considerably between the three research performing sectors of the Polish public science system. As the Polish Academy of Sciences was reproduced institutionally, the former governmental units for applied R&D were partly dismantled and displaced by private sector R&D units. In contrast, the Higher Education sector underwent a strong expansion and, thus, layering of new research activities and fields. Since policy shifts within the PPSS occurred relatively late, the more than two decades following the collapse of communism are of special interest to scholars of incremental, yet cumulative, institutional change. [ABSTRACT FROM AUTHOR]

Analyzing and predicting the trend of price fluctuation has been receiving more and more attention, as price risk has become the focus of risk control research in heating oil futures market. A novel time series prediction model combined with the complex network method is put forward in the paper. First of all, this paper counts the cumulative time interval of different nodes in the network, and fits its growth trend with the Fourier model. Then a novel price fluctuation prediction model is established based on the effective information such as some topology properties extracted from the network. The results show that the Fourier model can predict the emergence time of new nodes in the next stage, and the established price fluctuation prediction model can infer the names of nodes in the prediction interval, so as to determine the forward-looking behavior of price evolution. Besides, liken to the NAR neural network, the prediction results obtained by the proposed method also show superiority, which has important theoretical value and academic significance for early warning and prediction of price behavior in the heating oil futures market. [ABSTRACT FROM AUTHOR]

With rapid economic growth since the 21st century, cities in China have experienced considerable economic and social reconstruction. Driven by rapid industrialization, urban spatial structures are undergoing evolution and change. Therefore, this paper analyzes the processes and mechanisms associated with the evolution of the commercial spatial structure in Guangzhou after the financial crisis in 2008 based on both theoretical and empirical analyses. We use a Dirichlet multinomial regression (DMR) model to extract latent semantic information and determine urban functional areas from global positioning system (GPS) and point-of-interest (POI) data collected in Guangzhou in 2009 and 2013. In addition, we use movement patterns and POI data to identify the evolution of Guangzhou's commercial zones from 2009 to 2013. The results show that the urban commercial structure in Guangzhou gradually changed from a single-center model to a multi-center model with dispersed clusters and that the distribution of the entire spatial structure changed. Meanwhile, Guangzhou’s commercial structure not only varied over time but also exhibited specific geographical features. This paper demonstrates that the proposed method can clearly identify the boundary of the commercial area in Guangzhou and provides a valid spatial-temporal model of change in the city. Moreover, this study not only expounds the future development trends of the urban spatial structure in Guangzhou from a microcosmic perspective but also provides a scientific basis for clarifying the spatial locations and development advantages of urban functions within the city. [ABSTRACT FROM AUTHOR]

Background: Over the past two decades, the focus of mental health care has shifted from institutionalisation to community-based programs and short hospital stays. This change means that there is an increased role for caregivers, mostly family members, in managing persons with mental illness. Although there is evidence to support the benefits of deinstitutionalisation of mental health care, there are also indications of substantial burden experienced by caregivers; the evidence of which is limited in sub-Saharan Africa. However, knowledge of the nature and extent of this burden can inform the planning of mental health services that will not only benefit patients, but also caregivers and households. Objective: To systematically review the available evidence on the economic burden of severe mental illness on primary family caregivers in sub-Saharan Africa. Methods: A comprehensive search was conducted in Pubmed, CINAHL, Econlit and Web of Science with no date limitations up to September 2016 using keywords such as "burden", "cost of illness" and "economic burden" to identify relevant published literature. Articles were appraised using a standardised data extraction tool covering themes such as physical, psychological and socioeconomic burden. Results: Seven papers were included in the review. Caregivers were mostly family members with a mean age of 46.34, female and unemployed. Five out of seven studies (71%) estimated the full economic burden of severe mental illness on caregivers. The remainder of studies just described the caregiver burden. All seven papers reported moderate to severe caregiver burden characterised by financial constraint, productivity loss and lost employment. The caregiver’s level of income and employment status, severity of patient's condition and duration of mental illness were reported to negatively affect the economic burden experienced by caregivers. Conclusion: There is paucity of studies reporting the burden of severe mental illness on caregivers in sub-Saharan Africa. Further research is needed to present the nature and extent of this burden to inform service planning and policymaking. [ABSTRACT FROM AUTHOR]

Recreational fishing is often perceived as harmless when it comes to fisheries management, and its impact often estimated to surpass the economic outcomes of e.g. large-scale fisheries. Recreational fisheries are often an indication of political stability and sound ecosystem management. However, despite a high economic impact, the economic costs on traditional and small-scale commercial fishers is yet to be known. This paper answers the question of how unregulated recreational fisheries could rather generate a loss to an economy, and cause unfair competition with existing commercial sectors using the example of Algeria. This paper assesses catches and economic value of recreational fisheries in Algeria, and finds that over 6,000 tonnes reach commercial markets annually, competing directly with the small-scale artisanal sector, while selling recreationally caught fish is still illegal. The paper further finds that the public is thereby deprived—through lost tax, licence income and landed value of $45 million US annually. [ABSTRACT FROM AUTHOR]

In this paper we introduce a novel algorithm, called Exogenous Fitness, to calculate the Fitness of subnational entities and we apply it to the states of Brazil. In the last decade, several indices were introduced to measure the competitiveness of countries by looking at the complexity of their export basket. Tacchella et al (2012) developed a non-monetary metric called Fitness. In this paper, after an overview about Brazil as a whole and the comparison with the other BRIC countries, we introduce a new methodology based on the Fitness algorithm, called Exogenous Fitness. Combining the results with the Gross Domestic Product per capita (GDPp), we look at the dynamics of the Brazilian states in the Fitness-Income plane. Two regimes are distinguishable: one with high predictability and the other with low predictability, showing a deep analogy with the heterogeneous dynamics of the World countries. Furthermore, we compare the ranking of the Brazilian states according to the Exogenous Fitness with the ranking obtained through two other techniques, namely Endogenous Fitness and Economic Complexity Index. [ABSTRACT FROM AUTHOR]

The input-output table is very comprehensive and detailed in describing the national economic systems with abundant economic relationships, which contain supply and demand information among various industrial sectors. The complex network, a theory, and method for measuring the structure of a complex system can depict the structural characteristics of the internal structure of the researched object by measuring the structural indicators of the social and economic systems, revealing the complex relationships between the inner hierarchies and the external economic functions. In this paper, functions of industrial sectors on the global value chain are to be distinguished with bipartite graph theory, and inter-sector competitive relationships are to be extracted through resource allocation process. Furthermore, quantitative analysis indices will be proposed under the perspective of a complex network, which will be used to bring about simulations on the variation tendencies of economies’ status in different situations of commercial intercourses. Finally, a new econophysics analytical framework of international trade is to be established. [ABSTRACT FROM AUTHOR]

China’s fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others. [ABSTRACT FROM AUTHOR]

Recommender systems are vulnerable to shilling attacks. Forged user-generated content data, such as user ratings and reviews, are used by attackers to manipulate recommendation rankings. Shilling attack detection in recommender systems is of great significance to maintain the fairness and sustainability of recommender systems. The current studies have problems in terms of the poor universality of algorithms, difficulty in selection of user profile attributes, and lack of an optimization mechanism. In this paper, a shilling behaviour detection structure based on abnormal group user findings and rating time series analysis is proposed. This paper adds to the current understanding in the field by studying the credibility evaluation model in-depth based on the rating prediction model to derive proximity-based predictions. A method for detecting suspicious ratings based on suspicious time windows and target item analysis is proposed. Suspicious rating time segments are determined by constructing a time series, and data streams of the rating items are examined and suspicious rating segments are checked. To analyse features of shilling attacks by a group user’s credibility, an abnormal group user discovery method based on time series and time window is proposed. Standard testing datasets are used to verify the effect of the proposed method. [ABSTRACT FROM AUTHOR]