Search

Introduction: In this paper we perform a replication analysis of “Effect of a cash transfer programme for schooling on prevalence of HIV and herpes simplex type 2 in Malawi: a cluster randomised trial” by Sarah Baird and others published in “The Lancet” in 2012. The original study was a two-year cluster randomized intervention trial of never married girls aged 13–22 in Malawi. Enumeration areas were randomized to either an intervention involving cash transfer (conditional or unconditional of school enrollment) or control. The study included 1708 Malawian girls, who were enrolled at baseline and had biological testing for HIV and herpes simplex virus type 2 (HSV-2) at 18 months. The original findings showed that in the cohort of girls enrolled in school at baseline, the intervention had an effect on school enrollment, sexual outcomes, and HIV and HSV-2 prevalence. However, in the baseline school dropout cohort, the original study showed no intervention effect on HIV and HSV-2 prevalence. Methods: We performed a replication of the study to investigate the consistency and robustness of key results reported. A pre-specified replication plan was approved and published online. Cleaned data was obtained from the original authors. A pure replication was conducted by reading the methods section and reproducing the results and tables found in the original paper. Robustness of the results were examined with alternative analysis methods in a measurement and estimation analysis (MEA) approach. A theory of change analysis was performed testing a causal pathway, the effect of intervention on HIV awareness, and whether the intervention effect depended on the wealth of the individual. Results: The pure replication found that other than a few minor discrepancies, the original study was well replicated. However, the randomization and sampling weights could not be verified due to the lack of access to raw data and a detailed sample selection plan. Therefore, we are unable to determine how sampling influenced the results, which could be highly dependent on the sample. In MEA it was found that the intervention effect on HIV prevalence in the baseline schoolgirls cohort was somewhat sensitive to model choice, with a non-significant intervention effect for HIV depending on the statistical model used. The intervention effect on HSV-2 prevalence was more robust in terms of statistical significance, however, the odds ratios and confidence intervals differed from the original result by more than 10%. A theory of change analysis showed no effect of intervention on HIV awareness. In a causal pathway analysis, several variables were partial mediators, or potential mediators, indicating that the intervention could be working through its effect on school enrollment or selected sexual behaviors. Conclusions: The effect of intervention on HIV prevalence in the baseline schoolgirls was sensitive to the model choice; however, HSV-2 prevalence results were confirmed. We recommend that the results from the original published analysis indicating the impact of cash transfers on HIV prevalence be treated with caution. [ABSTRACT FROM AUTHOR]

Dementia is a neurological and cognitive condition that affects millions of people around the world. At any given time in the United Kingdom, 1 in 4 hospital beds are occupied by a person with dementia, while about 22% of these hospital admissions are due to preventable causes. In this paper we discuss using Internet of Things (IoT) technologies and in-home sensory devices in combination with machine learning techniques to monitor health and well-being of people with dementia. This will allow us to provide more effective and preventative care and reduce preventable hospital admissions. One of the unique aspects of this work is combining environmental data with physiological data collected via low cost in-home sensory devices to extract actionable information regarding the health and well-being of people with dementia in their own home environment. We have worked with clinicians to design our machine learning algorithms where we focused on developing solutions for real-world settings. In our solutions, we avoid generating too many alerts/alarms to prevent increasing the monitoring and support workload. We have designed an algorithm to detect Urinary Tract Infections (UTI) which is one of the top five reasons of hospital admissions for people with dementia (around 9% of hospital admissions for people with dementia in the UK). To develop the UTI detection algorithm, we have used a Non-negative Matrix Factorisation (NMF) technique to extract latent factors from raw observation and use them for clustering and identifying the possible UTI cases. In addition, we have designed an algorithm for detecting changes in activity patterns to identify early symptoms of cognitive decline or health decline in order to provide personalised and preventative care services. For this purpose, we have used an Isolation Forest (iForest) technique to create a holistic view of the daily activity patterns. This paper describes the algorithms and discusses the evaluation of the work using a large set of real-world data collected from a trial with people with dementia and their caregivers. [ABSTRACT FROM AUTHOR]

Genetic maps order genetic markers along chromosomes. They are, for instance, extensively used in marker-assisted selection to accelerate breeding programs. Even for the same species, people often have to deal with several alternative maps obtained using different ordering methods or different datasets, e.g. resulting from different segregating populations. Having efficient tools to identify the consistency and discrepancy of alternative maps is thus essential to facilitate genetic map comparisons. We propose to encode genetic maps by bucket order, a kind of order, which takes into account the blurred parts of the marker order while being an efficient data structure to achieve low complexity algorithms. The main result of this paper is an O(n log(n)) procedure to identify the largest agreements between two bucket orders of n elements, their Longest Common Subsequence (LCS), providing an efficient solution to highlight discrepancies between two genetic maps. The LCS of two maps, being the largest set of their collinear markers, is used as a building block to compute pairwise map congruence, to visually emphasize maker collinearity and in some scaffolding methods relying on genetic maps to improve genome assembly. As the LCS computation is a key subroutine of all these genetic map related tools, replacing the current LCS subroutine of those methods by ours –to do the exact same work but faster– could significantly speed up those methods without changing their accuracy. To ease such transition we provide all required algorithmic details in this self contained paper as well as an R package implementing them, named LCSLCIS, which is freely available at: . [ABSTRACT FROM AUTHOR]

Analysis of functional magnetic resonance imaging (fMRI) data has revealed that brain regions can be grouped into functional brain networks (fBNs) or communities. A community in fMRI analysis signifies a group of brain regions coupled functionally with one another. In neuroimaging, functional connectivity (FC) measure can be utilized to quantify such functionally connected regions for disease diagnosis and hence, signifies the need of devising novel FC estimation methods. In this paper, we propose a novel method of learning FC by constraining its rank and the sum of non-zero coefficients. The underlying idea is that fBNs are sparse and can be embedded in a relatively lower dimension space. In addition, we propose to extract overlapping networks. In many instances, communities are characterized as combinations of disjoint brain regions, although recent studies indicate that brain regions may participate in more than one community. In this paper, large-scale overlapping fBNs are identified on resting state fMRI data by employing non-negative matrix factorization. Our findings support the existence of overlapping brain networks. [ABSTRACT FROM AUTHOR]

In the context of generalized linear models (GLMs), interactions are automatically induced on the natural scale of the data. The conventional approach to measuring effects in GLMs based on significance testing (e.g. the Wald test or using deviance to assess model fit) is not always appropriate. The objective of this paper is to demonstrate the limitations of these conventional approaches and to explore alternative strategies for determining the importance of effects. The paper compares four approaches to determining the importance of effects in the GLM using 1) the Wald statistic, 2) change in deviance (model fitting criteria), 3) Bayesian GLM using vaguely informative priors and 4) Bayesian Model Averaging analysis. The main points in this paper are illustrated using an example study, which examines the risk factors for cyber abuse victimization, and are further examined using a simulation study. Analysis of our example dataset shows that, in terms of a logistic GLM, the conventional methods using the Wald test and the change in deviance can produce results that are difficult to interpret; Bayesian analysis of GLM is a suitable alternative, which is enhanced with prior knowledge about the direction of the effects; and Bayesian Model Averaging (BMA) is especially suited for new areas of research, particularly in the absence of theory. We recommend that social scientists consider including BMA in their standard toolbox for analysis of GLMs. [ABSTRACT FROM AUTHOR]

This paper, based on differential privacy protecting K-means clustering algorithm, realizes privacy protection by adding data-disturbing Laplace noise to cluster center point. In order to solve the problem of Laplace noise randomness which causes the center point to deviate, especially when poor availability of clustering results appears because of small privacy budget parameters, an improved differential privacy protecting K-means clustering algorithm was raised in this paper. The improved algorithm uses the contour coefficients to quantitatively evaluate the clustering effect of each iteration and add different noise to different clusters. In order to be adapted to the huge number of data, this paper provides an algorithm design in MapReduce Framework. Experimental finding shows that the new algorithm improves the availability of the algorithm clustering results under the condition of ensuring individual privacy without significantly increasing its operating time. [ABSTRACT FROM AUTHOR]

In this paper, the accelerated failure time (AFT) model is modified to analyze post-work grocery shopping activity duration. Much previous shopping duration analysis was conducted using the proportional hazard (PH) modeling approach. Once the proportionality assumption was violated, the traditional accelerated failure time (TAFT) model was usually selected as an alternative modeling approach. However, a TAFT model only has covariates with non-proportional and time-dependent effects on the hazard overtime while a PH model only accommodates covariates with proportional and time-independent effects. Neither of them considers the possibility that some of covariates may have proportional and time-independent effects and some may have non-proportional and time-dependent effects on the hazard value in one model. To address this issue, the paper generalizes the TAFT model and develops a modified accelerated failure time (MAFT) model to accommodate both time-dependent and time-independent covariates for activity duration analysis. Checking on the proportionality assumption indicates that the assumption is not valid in the post-work grocery shopping activity data extracted from the 2017 National Household Travel Survey (NHTS) conducted by the U.S. Department of Transportation (USDOT). Both TAFT and MAFT models are developed for comparisons and analysis. The empirical and statistical results show that there do exist two different types of covariates affecting shopping activity duration, including covariates only with proportional and time-independent effects (i.e. working duration, commute travel time) and those with non-proportional and time-dependent effects. The MAFT model can capture the subtleties in various types of covariate effects and help better understand how those covariates affect activity duration overtime. This paper also shows the importance to develop a flexible duration model with both time-dependent and time-independent covariates for accurately evaluating travel demand management (TDM) policies, like flexible work hours. [ABSTRACT FROM AUTHOR]

In this paper, we study the limit of compactness which is a graph index originally introduced for measuring structural characteristics of hypermedia. Applying compactness to large scale small-world graphs (Mehler, 2008) observed its limit behaviour to be equal 1. The striking question concerning this finding was whether this limit behaviour resulted from the specifics of small-world graphs or was simply an artefact. In this paper, we determine the necessary and sufficient conditions for any sequence of connected graphs resulting in a limit value of CB = 1 which can be generalized with some consideration for the case of disconnected graph classes (Theorem 3). This result can be applied to many well-known classes of connected graphs. Here, we illustrate it by considering four examples. In fact, our proof-theoretical approach allows for quickly obtaining the limit value of compactness for many graph classes sparing computational costs. [ABSTRACT FROM AUTHOR]

Recently, computational Grids have proven to be a good solution for processing large-scale, computation intensive problems. However, the heterogeneity, dynamics of resources and diversity of applications requirements have always been important factors affecting their performance. In response to these challenges, this work first builds a Grid job scheduling architecture that can dynamically monitor Grid computing center resources and make corresponding scheduling decisions. Second, a Grid job model is proposed to describe the application requirements. Third, this paper studies the characteristics of commercial interconnection networks used in Grids and forecast job transmission time. Fourth, this paper proposes an application-aware job scheduling mechanism (AJSM) that includes periodic scheduling flow and a heuristic application-aware deadline constraint job scheduling algorithm. The rigorous performance evaluation results clearly demonstrate that the proposed application-aware job scheduling mechanism can successful schedule more Grid jobs than the existing algorithms. For successful scheduled jobs, our proposed AJSM method is the best algorithm for job average processing time and makespan. [ABSTRACT FROM AUTHOR]

Diabetic retinopathy (DR) is a disease which is widely diagnosed using (colour fundus) images. Efficiency and accuracy are critical in diagnosing DR as lack of timely intervention can lead to irreversible visual impairment. In this paper, we examine strategies for scrutinizing images which affect diagnostic performance of medical practitioners via an eye-tracking study. A total of 56 subjects with 0 to 18 years of experience participated in the study. Every subject was asked to detect DR from 40 images. The findings indicate that practitioners use mainly two types of strategies characterized by either higher dwell duration or longer track length. The main findings of the study are that higher dwell-based strategy led to higher average accuracy (> 85%) in diagnosis, irrespective of the expertise of practitioner; whereas, the average obtained accuracy with a long-track length-based strategy was dependent on the expertise of the practitioner. In the second part of the paper, we use the experimental findings to recommend a scanning strategy for fast and accurate diagnosis of DR that can be potentially used by image readers. This is derived by combining the eye-tracking gaze maps of medical experts in a novel manner based on a set of rules. This strategy requires scrutiny of images in a manner which is consistent with spatial preferences found in human perception in general and in the domain of fundus images in particular. The Levenshtein distance-based assessment of gaze patterns also establish the effectiveness of the derived scanning pattern and is thus recommended for image readers. [ABSTRACT FROM AUTHOR]

In this paper we investigate the changes in the functional connectivity intensity, and some related properties, in healthy people, across the life span and at resting state. For the explicit computation of the functional connectivity we exploit a recently proposed model, that bases not only on the correlations data provided by the acquisition equipment, but also on different parameters, such as the anatomical distances between nodes and their degrees. The leading purpose of the paper is to show that the proposed approach is able to recover the main aspects of resting state condition known from the available literature, as well as to suggest new insights, perspectives and speculations from a neurobiological point of view. Our study involves 133 subjects, both males and females of different ages, with no evidence of neurological diseases or systemic disorders. First, we show how the model applies to the sample, where the subjects are grouped into 28 different groups (14 of males and 14 of females), according to their age. This leads to the construction of two graphs (one for males and one for females), that can be realistically interpreted as representative of the neural network during the resting state. Second, following the idea that the brain network is better understood by focusing on specific nodes having a kind of centrality, we refine the two output graphs by introducing a new metric that favours the selection of nodes having higher degrees. As a third step, we extensively comment and discuss the obtained results. In particular, it is remarkable that, despite a great overlapping exists between the outcomes concerning males and females, some intriguing differences appear. This motivates a deeper local investigation, which represents the fourth part of the paper, carried out through a thorough statistical analysis. As a result, we are enabled to support that, for two special age groups, a few links contribute in differentiating the behaviour of males and females. In addition, we performed an average-based comparison between the proposed model and the traditional statistical correlation-based approach, then discussing and commenting the main outlined discrepancies. [ABSTRACT FROM AUTHOR]

This paper develops a new machine vision framework for efficient detection and classification of manufacturing defects in metal boxes. Previous techniques, which are based on either visual inspection or on hand-crafted features, are both inaccurate and time consuming. In this paper, we show that by using autoencoder deep neural network (DNN) architecture, we are able to not only classify manufacturing defects, but also localize them with high accuracy. Compared to traditional techniques, DNNs are able to learn, in a supervised manner, the visual features that achieve the best performance. Our experiments on a database of real images demonstrate that our approach overcomes the state-of-the-art while remaining computationally competitive. [ABSTRACT FROM AUTHOR]

This paper uses text data mining to identify long-term developments in tourism academic research from the perspectives of thematic focus, geography, and gender of tourism authorship. Abstracts of papers published in the period of 1970–2017 in high-ranking tourist journals were extracted from the Scopus database and served as data source for the analysis. Fourteen subject areas were identified using the Latent Dirichlet Allocation (LDA) text mining approach. LDA integrated with GIS information allowed to obtain geography distribution and trends of scholarly output, while probabilistic methods of gender identification based on social network data mining were used to track gender dynamics with sufficient confidence. The findings indicate that, while all 14 topics have been prominent from the inception of tourism studies to the present day, the geography of scholarship has notably expanded and the share of female authorship has increased through time and currently almost equals that of male authorship. [ABSTRACT FROM AUTHOR]

Particle Swarm Optimization (PSO) is widely used in maximum power point tracking (MPPT) of photovoltaic (PV) energy systems. Nevertheless, this technique suffers from two main problems in the case of partial shading conditions (PSCs). The first problem is that PSO is a time invariant optimization technique that cannot follow the dynamic global peak (GP) under time variant shading patterns (SPs) and sticks to the first GP that occurs at the beginning. This problem can be solved by dispersing the PSO particles using two new techniques introduced in this paper. The two new proposed PSO re-initialization techniques are to disperse the particles upon the SP changes and the other one is upon a predefined time (PDT). The second problem is regarding the high oscillations around steady state, which can be solved by using fuzzy logic controller (FLC) to fine-tune the output power and voltage from the PV system. The new contribution of this paper is the hybrid PSO-FLC with two PSO particles dispersing techniques that is able to solve the two previous mentioned problems effectively and improve the performance of the PV system in both normal and PSCs. A detailed list of comparisons between hybrid PSO-FLC and original PSO using the two proposed methodologies are achieved. The results prove the superior performance of hybrid PSO-FLC compared to PSO in terms of efficiency, accuracy, oscillations reduction around steady state and soft tuning of the GP tracked. [ABSTRACT FROM AUTHOR]

Ideal configuration or layout of highways should resemble the actual demands for the roads represented by Origin-Destination (OD) information. It would be beneficial if existing highways can be evaluated for their configurational fitness against the current demands, and newly planned highways can carefully be designed in terms of their layouts and topologies that would reflect the demands. Analysis techniques used for complex networks in the matured field of network theory can be applied for the highway layout health monitoring against the current OD information. This paper proposes a methodology of measuring the fitness of existing highways by comparing their structural configuration against conceptual OD networks using well-established techniques in network theory for complex networks. In the first phase, this paper conducts an empirical analysis and finds that both structural highway network and OD network follow the “power law” distribution as they are weighted by capacity and traffic volume respectively. It is also found that the power law coefficient of the OD network dynamically changes throughout the day and week. In the second phase, a noble methodology of weighting and measuring the health, of structural highway networks against OD networks by means of comparing their power law coefficients is proposed. It is found that the proposed method is effective at detecting deviations from ideal structural configurations associated with actual demands. [ABSTRACT FROM AUTHOR]

In this paper, a two-stage filter for removing salt-and-pepper noise using noise detector based on characteristic difference parameter and adaptive directional mean filter is proposed. The first stage firstly detects the noise corrupted pixels by combining characteristic difference parameter and gray level extreme, then develops an improved adaptive median filter to firstly restore them. The second stage introduces a restoration scheme to further restore the noise corrupted pixels, which firstly divides them into two types and then applies different restoration skills for the pixels based on the classification result. One type of pixels is restored by the mean filter and the other type of pixels is restored by the proposed adaptive directional mean filter. The new filter firstly adaptively selects the optimal filtering window and direction template, then replaces the gray level of noise corrupted pixel by the mean value of pixels on the optimal template. Experimental results show that the proposed filter outperforms many existing main filters in terms of noise suppression and detail preservation. [ABSTRACT FROM AUTHOR]

In clinical neuropsychology the cognitive abilities of neurological patients are commonly estimated using well-established paper-based tests. Typically, scores on some tests remain relatively well preserved, whilst others exhibit a significant and disproportionate decline. Scores on those tests that measure preserved cognitive functions (so-called ‘hold’ tests) may be used to estimate premorbid abilities, including scores in non-hold tests that would have been expected prior to the onset of cognitive impairment. Many hold tests entail word reading, with each word being graded as correctly or incorrectly pronounced. Inevitably, such tests are likely to contain words that provide little or no diagnostic power (i.e., can be eliminated without negatively affecting prediction accuracy). In this paper, a genetic algorithm is developed and demonstrated, using n = 92 neurologically healthy participants, to identify optimal word subsets from the National Adult Reading Test that minimize the mean error in predicting the most widely used clinical measure of IQ and cognitive ability, the Wechsler Adult Intelligence Scale Fourth Edition IQ. In addition to requiring only 17–20 of the original 50 words (suggesting that this test could be revised to be up to 66% shorter) and minimizing mean prediction error, the algorithm increases the proportion of the variance in the predicted variable explained in comparison to using all words (from r2 = 0.46 to r2 = 0.61). In a clinical setting this would improve estimates of premorbid cognitive function and, if an abbreviated revision to this test were to be adopted, reduce the arduousness of the test for patients. The proposed method is evaluated with jackknifing and leave one out cross validation. The general approach may be used to optimize the relationship between any two psychological tests by finding the question subset in one test that minimizes the prediction error in a second test by training the genetic algorithm using data collected from participants upon whom both tests have been administered. This approach may also be used to develop new predictive tests, since it provides a method to identify an optimal subset of a set of candidate questions (for which empirical data have been collected) that maximizes prediction accuracy and the proportion of variance in the predicted variable that can be explained. [ABSTRACT FROM AUTHOR]

Wind and temperature data are important parameters in aircraft performance studies. The lack of accurate measurements of these parameters forces researchers to rely on numerical weather prediction models, which are often filtered for a larger area with decreased local accuracy. Aircraft, however, also transmit information related to weather conditions, in response to interrogation by air traffic controller surveillance radars. Although not intended for this purpose, aircraft surveillance data contains information that can be used for weather models. This paper presents a method that can be used to reconstruct a weather field from surveillance data that can be received with a simple 1090 MHz receiver. Throughout the paper, we answer two main research questions: how to accurately infer wind and temperature from aircraft surveillance data, and how to reconstruct a real-time weather grid efficiently. We consider aircraft as moving sensors that measure wind and temperature conditions indirectly at different locations and flight levels. To address the first question, aircraft barometric altitude, ground velocity, and airspeed are decoded from down-linked surveillance data. Then, temperature and wind observations are computed based on aeronautical speed conversion equations. To address the second question, we propose a novel Meteo-Particle (MP) model for constructing the wind and temperature fields. Short-term local prediction is also possible by employing a predictor layer. Using an unseen observation test dataset, we are able to validate that the mean absolute errors of inferred wind and temperature using MP model are 67% and 26% less than using the interpolated model based on GFS reanalysis data. [ABSTRACT FROM AUTHOR]

Traffic congestion in freeway network is a prevalent transportation problem and leads to a strong degradation of freeway network facilities. This paper proposes a new coordinated optimization approach for freeway network, aiming to relieve the traffic congestion in freeway network equipped with the coordinated traffic controllers. The challenge is how to solve the problem between the traffic control goals of each path and those of the network. In this paper, the bi-level programming theory is used to address this problem. More exactly, in the path level, the optimal control model is designed to relieve congestion in each path of the test network. Furthermore, in the network level, the optimal model considers the traffic equilibrium and cost optimization. The efficiency of the proposed approach is tested on a well-known traffic network calibrated by the field test data of freeway network. The results show that the proposed approach has positive effects in balancing traffic load and improving the service level of freeway networks. [ABSTRACT FROM AUTHOR]

Mutation cluster analysis is critical for understanding certain mutational mechanisms relevant to genetic disease, diversity, and evolution. Yet, whole genome sequencing for detection of mutation clusters is prohibitive with high cost for most organisms and population surveys. Single nucleotide polymorphism (SNP) genotyping arrays, like the Mouse Diversity Genotyping Array, offer an alternative low-cost, screening for mutations at hundreds of thousands of loci across the genome using experimental designs that permit capture of de novo mutations in any tissue. Formal statistical tools for genome-wide detection of mutation clusters under a microarray probe sampling system are yet to be established. A challenge in the development of statistical methods is that microarray detection of mutation clusters is constrained to select SNP loci captured by probes on the array. This paper develops a Monte Carlo framework for cluster testing and assesses test statistics for capturing potential deviations from spatial randomness which are motivated by, and incorporate, the array design. While null distributions of the test statistics are established under spatial randomness via the homogeneous Poisson process, power performance of the test statistics is evaluated under postulated types of Neyman-Scott clustering processes through Monte Carlo simulation. A new statistic is developed and recommended as a screening tool for mutation cluster detection. The statistic is demonstrated to be excellent in terms of its robustness and power performance, and useful for cluster analysis in settings of missing data. The test statistic can also be generalized to any one dimensional system where every site is observed, such as DNA sequencing data. The paper illustrates how the informal graphical tools for detecting clusters may be misleading. The statistic is used for finding clusters of putative SNP differences in a mixture of different mouse genetic backgrounds and clusters of de novo SNP differences arising between tissues with development and carcinogenesis. [ABSTRACT FROM AUTHOR]

This paper describes and presents a stable and reliable set of stereo-photogrammetric normative data for global and spino-pelvic sagittal alignment, as a proven reference system for evaluating/measuring a fully unconstrained natural upright neutral standing attitude in a young healthy adult population. The methodological features described in this article will enable future studies to replicate and/or directly compare a wide range of different postural tests and/or sagittal alignment assessment procedures including the study of sagittal spine shape variations occurring during gait performance. To date, the quantitative evaluation of adult spinal deformity (ASD) has been mainly confined to the X-ray imaging approach and, more recently, to 3D X-ray reconstruction. Within the existing evaluation framework an opportunity exists for an additional approach: a quantitative evaluation procedure which is easy, accurate, relatively speedy and non-ionising, in order to monitor and track the progress of patients in the areas of both surgical and non-surgical treatment. The resources and methodology described in this paper have been proven to meet all these criteria. They have enabled full 3D posture (including 3D spine shape and sagittal alignment of the skeleton) to be consistently and successfully measured in adult volunteers. All the measurement/evaluation procedures and outcomes carried out were based entirely on the new non-ionising 3D opto-electronic stereo-photogrammetric approach described in this article. The protocol for this methodology was based on a standard set of 27 pre-selected anatomical “landmarks” on the human body, providing standard reference points for observation and measurement. A total of 124 healthy subjects were successfully assessed and, for each subject, 27 individual markers were applied to the corresponding locations on his/her body. Statistical tests to investigate gender differences were also carried out. Descriptive statistics are provided for all 15 of the spino-pelvic parameters under consideration. Results indicated significant differences between genders in five sets of parameters: Kyphosis tilt, Head tilt, Pelvic tilt, Spino-pelvic angle and T1-pelvic angle. The data also demonstrate a high degree of congruity with results obtained using the X-ray method, as evidenced by the existing literature in the field. In summary, the current study presents a new stereo-photogrammetric opto-electronic technology which can be used successfully for ASD evaluation and introduces a comprehensive set of normative data analogous to those proposed in X-ray analysis for sagittal spino-pelvic and total body alignment. [ABSTRACT FROM AUTHOR]

Analyzing and predicting the trend of price fluctuation has been receiving more and more attention, as price risk has become the focus of risk control research in heating oil futures market. A novel time series prediction model combined with the complex network method is put forward in the paper. First of all, this paper counts the cumulative time interval of different nodes in the network, and fits its growth trend with the Fourier model. Then a novel price fluctuation prediction model is established based on the effective information such as some topology properties extracted from the network. The results show that the Fourier model can predict the emergence time of new nodes in the next stage, and the established price fluctuation prediction model can infer the names of nodes in the prediction interval, so as to determine the forward-looking behavior of price evolution. Besides, liken to the NAR neural network, the prediction results obtained by the proposed method also show superiority, which has important theoretical value and academic significance for early warning and prediction of price behavior in the heating oil futures market. [ABSTRACT FROM AUTHOR]

Glioma detection and segmentation is a challenging task for radiologists and clinicians. The research reported in this paper seeks to develop a better clinical decision support algorithm for clinicians diagnosis. This paper presents a probabilistic method for detection and segmentation between abnormal tissue regions and brain tumour (tumour core and edema) portions from Magnetic Resonance Imaging (MRI). A framework is constructed to learn structure of undirected graphical models that can represent the spatial relationships among variables and apply it to glioma segmentation. Compared with the pixel of image, the superpixel is more consistent with human visual cognition and contains less redundancy, thus, the superpixels are considered as the basic unit of structure learning and glioma segmentation scheme. ℓ1-regularization techniques are applied to learn the appropriate structure for modeling graphical models. Conditional Random Fields (CRF) are used to model the spatial interactions among image superpixel regions and their measurements. A number of features including statistics features, the combined features from the local binary pattern as well as gray level run length, curve features, and fractal features were extracted from each superpixel. The features are then passed by ℓ1-regularization to ensure a robust classification. The proposed method is compared with support vector machine and Fuzzy c-means to classify each superpixel into normal and abnormal tissue. The proposed system is tested for the presence of low grade as well as high grade glioma tumors on images collected from BRATS2013, BRATS2015 data set and Henan Provincial People’s Hospital (HNPPH) data set. The experiments performed provides similarity between segmented and truth image up to 91.5% by correlation method. [ABSTRACT FROM AUTHOR]

With rapid economic growth since the 21st century, cities in China have experienced considerable economic and social reconstruction. Driven by rapid industrialization, urban spatial structures are undergoing evolution and change. Therefore, this paper analyzes the processes and mechanisms associated with the evolution of the commercial spatial structure in Guangzhou after the financial crisis in 2008 based on both theoretical and empirical analyses. We use a Dirichlet multinomial regression (DMR) model to extract latent semantic information and determine urban functional areas from global positioning system (GPS) and point-of-interest (POI) data collected in Guangzhou in 2009 and 2013. In addition, we use movement patterns and POI data to identify the evolution of Guangzhou's commercial zones from 2009 to 2013. The results show that the urban commercial structure in Guangzhou gradually changed from a single-center model to a multi-center model with dispersed clusters and that the distribution of the entire spatial structure changed. Meanwhile, Guangzhou’s commercial structure not only varied over time but also exhibited specific geographical features. This paper demonstrates that the proposed method can clearly identify the boundary of the commercial area in Guangzhou and provides a valid spatial-temporal model of change in the city. Moreover, this study not only expounds the future development trends of the urban spatial structure in Guangzhou from a microcosmic perspective but also provides a scientific basis for clarifying the spatial locations and development advantages of urban functions within the city. [ABSTRACT FROM AUTHOR]

The Journal of Physiology and British Journal of Pharmacology jointly published an editorial series in 2011 to improve standards in statistical reporting and data analysis. It is not known whether reporting practices changed in response to the editorial advice. We conducted a cross-sectional analysis of reporting practices in a random sample of research papers published in these journals before (n = 202) and after (n = 199) publication of the editorial advice. Descriptive data are presented. There was no evidence that reporting practices improved following publication of the editorial advice. Overall, 76-84% of papers with written measures that summarized data variability used standard errors of the mean, and 90-96% of papers did not report exact p-values for primary analyses and post-hoc tests. 76-84% of papers that plotted measures to summarize data variability used standard errors of the mean, and only 2-4% of papers plotted raw data used to calculate variability. Of papers that reported p-values between 0.05 and 0.1, 56-63% interpreted these as trends or statistically significant. Implied or gross spin was noted incidentally in papers before (n = 10) and after (n = 9) the editorial advice was published. Overall, poor statistical reporting, inadequate data presentation and spin were present before and after the editorial advice was published. While the scientific community continues to implement strategies for improving reporting practices, our results indicate stronger incentives or enforcements are needed. [ABSTRACT FROM AUTHOR]

Since 1997 a considerable effort has been spent on the study of the swap (switch) Markov chains on graphic degree sequences. All of these results assume some kind of regularity in the corresponding degree sequences. Recently, Greenhill and Sfragara published a breakthrough paper about irregular normal and directed degree sequences for which rapid mixing of the swap Markov chain is proved. In this paper we present two groups of results. An example from the first group is the following theorem: let be a directed degree sequence on n vertices. Denote by Δ the maximum value among all in- and out-degrees and denote by the number of edges in the realization. Assume furthermore that . Then the swap Markov chain on the realizations of is rapidly mixing. This result is a slight improvement on one of the results of Greenhill and Sfragara. An example from the second group is the following: let d be a bipartite degree sequence on the vertex set U ⊎ V, and let 0 < c1 ≤ c2 < |U| and 0 < d1 ≤ d2 < |V| be integers, where c1 ≤ d(v) ≤ c2: ∀v ∈ V and d1 ≤ d(u) ≤ d2: ∀u ∈ U. Furthermore assume that (c2 − c1 − 1)(d2 − d1 − 1) < max{c1(|V| − d2), d1(|U| − c2)}. Then the swap Markov chain on the realizations of d is rapidly mixing. A straightforward application of this latter result shows that when a random bipartite or directed graph is generated under the Erdős—Rényi G(n, p) model with mild assumptions on n and p then the degree sequence of the generated graph has, with high probability, a rapidly mixing swap Markov chain on its realizations. [ABSTRACT FROM AUTHOR]

Radio propagation prediction simulation methods based on deterministic technique such as ray launching is extensively used to accomplish radio channel characterization. However, the superiority of the simulation depends on the number of rays launched and received. This paper presented the indoor three-dimensional (3D) Minimum Ray Launching Maximum Accuracy (MRLMA) technique, which is applicable for an efficient indoor radio wave propagation prediction. Utilizing the novel MRLMA technique in the simulation environment for ray lunching and tracing can drastically reduce the number of rays that need to be traced, and improve the efficiency of ray tracing. Implementation and justification of MRLMA presented in the paper. An indoor office 3D layouts are selected and simulations have been performed using the MRLMA and other reference techniques. Results showed that the indoor 3D MRLMA model is appropriate for wireless communications network systems design and optimization process with respect to efficiency, coverage, number of rays launching, number of rays received by the mobile station, and simulation time. [ABSTRACT FROM AUTHOR]

The ensemble method random forests has become a popular classification tool in bioinformatics and related fields. The out-of-bag error is an error estimation technique often used to evaluate the accuracy of a random forest and to select appropriate values for tuning parameters, such as the number of candidate predictors that are randomly drawn for a split, referred to as mtry. However, for binary classification problems with metric predictors it has been shown that the out-of-bag error can overestimate the true prediction error depending on the choices of random forests parameters. Based on simulated and real data this paper aims to identify settings for which this overestimation is likely. It is, moreover, questionable whether the out-of-bag error can be used in classification tasks for selecting tuning parameters like mtry, because the overestimation is seen to depend on the parameter mtry. The simulation-based and real-data based studies with metric predictor variables performed in this paper show that the overestimation is largest in balanced settings and in settings with few observations, a large number of predictor variables, small correlations between predictors and weak effects. There was hardly any impact of the overestimation on tuning parameter selection. However, although the prediction performance of random forests was not substantially affected when using the out-of-bag error for tuning parameter selection in the present studies, one cannot be sure that this applies to all future data. For settings with metric predictor variables it is therefore strongly recommended to use stratified subsampling with sampling fractions that are proportional to the class sizes for both tuning parameter selection and error estimation in random forests. This yielded less biased estimates of the true prediction error. In unbalanced settings, in which there is a strong interest in predicting observations from the smaller classes well, sampling the same number of observations from each class is a promising alternative. [ABSTRACT FROM AUTHOR]

This paper investigates the consequences of ignoring the clustered data structure on allometric models. Clustered data, in the form of multiple trees sampled from multiple forest stands is commonly used to develop biomass allometric models. Of 102 reviewed papers published between 2012 and 2016 that reported biomass allometric models, 84 (82%) have used a clustered sampling design. However, in as many as 80% of these, the clustered data structure was ignored, potentially violating the independence assumption in ordinary least squares methods. The consequences of ignoring clustered data structure were empirically validated using two clustered biomass datasets (of 110 and 220 trees, with the cluster size of 5 and 10 trees respectively). We showed that when Intraclass Correlation Coefficient (ICC) was higher than zero, ignoring the clustered data structure returned underestimated standard errors, affecting further the confidence interval and t-test results. The underestimation level depended on ICC (which shows the variance proportion that was caused by the forest stand) and on cluster size (the number of trees sampled from one forest stand). We also showed that using first-order autocorrelation tests, such as the traditional Durbin-Watson statistic, to detect the autocorrelation due to clustered structure could be misleading as the test may show lack of autocorrelation even though ICC is different from zero. In conclusion, when ICC is higher than zero, ignoring the clustered data structure yields over-confident biomass predictions (due to underestimated confidence interval) and/or incorrect research conclusions (due to overestimated evidence against null hypothesis in t-test). Therefore, using a modelling approach that accounts for the hierarchical structure of the data is highly recommended when any form of clustering can be identified, even if the autocorrelation is not significant. [ABSTRACT FROM AUTHOR]

Outlier removal is a fundamental data processing task to ensure the quality of scanned point cloud data (PCD), which is becoming increasing important in industrial applications and reverse engineering. Acquired scanned PCD is usually noisy, sparse and temporarily incoherent. Thus the processing of scanned data is typically an ill-posed problem. In the paper, we present a simple and effective method based on two geometrical characteristics constraints to trim the noisy points. One of the geometrical characteristics is the local density information and another is the deviation from the local fitting plane. The local density based method provides a preprocessing step, which could remove those sparse outlier and isolated outlier. The non-isolated outlier removal in this paper depends on a local projection method, which placing those points onto objects. There is no doubt that the deviation of any point from the local fitting plane should be a criterion to reduce the noisy points. The experimental results demonstrate the ability to remove the noisy point from various man-made objects consisting of complex outlier. [ABSTRACT FROM AUTHOR]

In this paper we compare systematically the most promising neuroevolutionary methods and two new original methods on the double-pole balancing problem with respect to: the ability to discover solutions that are robust to variations of the environment, the speed with which such solutions are found, and the ability to scale-up to more complex versions of the problem. The results indicate that the two original methods introduced in this paper and the Exponential Natural Evolutionary Strategy method largely outperform the other methods with respect to all considered criteria. The results collected in different experimental conditions also reveal the importance of regulating the selective pressure and the importance of exposing evolving agents to variable environmental conditions. The data collected and the results of the comparisons are used to identify the most effective methods and the most promising research directions. [ABSTRACT FROM AUTHOR]

This paper focuses on evaluating the systemic risk in interbank networks, proposing a series of measurements: risk distance, risk degree and m-order risk degree. The proposed measurements are formally proven to have good basic and extended properties that are able to reflect the effect of bank size, liability size, liability distribution, and the discount factor on the default risk, not only of a single bank, but also of the entire system. Additionally, the abovementioned properties and the relationship between risk distance and financial contagion indicate the rationality embodied in the proposed measurements. This paper also provides some implications on how to decrease or prevent the systemic risk in an interbank system. [ABSTRACT FROM AUTHOR]

With the convergence of various broadcasting systems, the amount of content available in mobile terminals including IPTV has significantly increased. In this paper, we propose a system that enables users to schedule programs considering both section video clips and full video clips based on the user detection method with similar preference. And, since the system constituting the contents can be classified according to the program, the proposed method can store a program desired by the user, and thus create and schedule a kind of individual channel. Experimental results show that the proposed method has a higher prediction accuracy; this is accomplished by comparing existing channel recommendation methods with the program recommendation methods proposed in this paper. [ABSTRACT FROM AUTHOR]

As researchers use computational methods to study complex social behaviors at scale, the validity of this computational social science depends on the integrity of the data. On July 2, 2015, Jason Baumgartner published a dataset advertised to include “every publicly available Reddit comment” which was quickly shared on Bittorrent and the Internet Archive. This data quickly became the basis of many academic papers on topics including machine learning, social behavior, politics, breaking news, and hate speech. We have discovered substantial gaps and limitations in this dataset which may contribute to bias in the findings of that research. In this paper, we document the dataset, substantial missing observations in the dataset, and the risks to research validity from those gaps. In summary, we identify strong risks to research that considers user histories or network analysis, moderate risks to research that compares counts of participation, and lesser risk to machine learning research that avoids making representative claims about behavior and participation on Reddit. [ABSTRACT FROM AUTHOR]

Analyzing geological drilling hole images acquired by Axial View Panoramic Borehole Televiewer (APBT) is a key step to explore the geological structure in a geological exploration. Conventionally, the borehole images are examined by technicians, which is inefficient and subjective. In this paper, three dominant types of borehole-wall images on coal-rock mass structure, namely, border images, fracture images and intact rock mass images are mainly studied. The traditional image classification methods based on unified feature extraction algorithm and single classifier is not effect for the borehole images. Therefore, this paper proposes a novel two-stage classification approach to improve the classification performance of borehole images. In the first-stage classification, the border images are identified from three kinds of images based on texture features and gray-scale histograms features. For the remaining two types of images, in the second-stage classification, Gabor filter is first applied to segment the region of interest (ROI) (such as microfracture, absciss layer and horizontal cracks, etc.) and the central interference region. Then, using the same feature vector after eliminating the central interference region, fracture images are separated from intact rock mass images. We test our two-stage classification system with real borehole images. The results of experimental show that the two-stage classification method can effectively classify three major borehole-wall images with the correction rate of 95.55% in the first stage and 95% in the second stage. [ABSTRACT FROM AUTHOR]

This paper studies the drive-response synchronization for quaternion-valued shunting inhibitory cellular neural networks (QVSICNNs) with mixed delays. First, QVSICNN is decomposed into an equivalent real-valued system in order to avoid the non-commutativity of the multiplicity. Then, the existence of almost periodic solutions is obtained based on the Banach fixed point theorem. An novel state-feedback controller is designed to ensure the global exponential almost periodic synchronization. At the end of the paper, an example is given to illustrate the effectiveness of the obtained results. [ABSTRACT FROM AUTHOR]

Aiming to solve the safety problems of high-speed railway operation and management, one new method is urgently needed to construct on the basis of the rough set theory and the uncertainty measurement theory. The method should carefully consider every factor of high-speed railway operation that realizes the measurement indexes of its safety operation. After analyzing the factors that influence high-speed railway safety operation in detail, a rough measurement model is finally constructed to describe the operation process. Based on the above considerations, this paper redistricts the safety influence factors of high-speed railway operation as 16 measurement indexes which include staff index, vehicle index, equipment index and environment. And the paper also provides another reasonable and effective theoretical method to solve the safety problems of multiple attribute measurement in high-speed railway operation. As while as analyzing the operation data of 10 pivotal railway lines in China, this paper respectively uses the rough set-based measurement model and value function model (one model for calculating the safety value) for calculating the operation safety value. The calculation result shows that the curve of safety value with the proposed method has smaller error and greater stability than the value function method’s, which verifies the feasibility and effectiveness. [ABSTRACT FROM AUTHOR]

In this paper we introduce a novel algorithm, called Exogenous Fitness, to calculate the Fitness of subnational entities and we apply it to the states of Brazil. In the last decade, several indices were introduced to measure the competitiveness of countries by looking at the complexity of their export basket. Tacchella et al (2012) developed a non-monetary metric called Fitness. In this paper, after an overview about Brazil as a whole and the comparison with the other BRIC countries, we introduce a new methodology based on the Fitness algorithm, called Exogenous Fitness. Combining the results with the Gross Domestic Product per capita (GDPp), we look at the dynamics of the Brazilian states in the Fitness-Income plane. Two regimes are distinguishable: one with high predictability and the other with low predictability, showing a deep analogy with the heterogeneous dynamics of the World countries. Furthermore, we compare the ranking of the Brazilian states according to the Exogenous Fitness with the ranking obtained through two other techniques, namely Endogenous Fitness and Economic Complexity Index. [ABSTRACT FROM AUTHOR]

In business replenishment, discount offers of multi-item may either provide different discount schedules with a single discount type, or provide schedules with multiple discount types. The paper investigates the joint effects of multiple discount schemes on the decisions of multi-item joint replenishment. In this paper, a joint replenishment problem (JRP) model, considering three discount (all-unit discount, incremental discount, total volume discount) offers simultaneously, is constructed to determine the basic cycle time and joint replenishment frequencies of multi-item. To solve the proposed problem, a heuristic algorithm is proposed to find the optimal solutions and the corresponding total cost of the JRP model. Numerical experiment is performed to test the algorithm and the computational results of JRPs under different discount combinations show different significance in the replenishment cost reduction. [ABSTRACT FROM AUTHOR]

This paper presents a formulation for selecting the stage ratios and number of stages in a multistage transmission with a given desired total transmission ratio in a manner that maximizes efficiency, maximizes acceleration, or minimizes the mass of the transmission. The formulation is used to highlight several implications for gear train design, including the fact that minimizing rotational inertia and mass are competing objectives with respect to optimal selection of stage ratios, and that both rotational inertia and mass can often be minimized by increasing the total number of stages beyond a minimum realizable number. Additionally, a multistage transmission will generally provide maximum acceleration when the stage ratios increase monotonically from the motor to the load. The transmission will have minimum mass when the stage ratios decrease monotonically. The transmission will also provide maximum efficiency when the corresponding stages employ constant stage ratios. This paper aims to use this optimization formulation to elucidate tradeoffs between various common objectives in gear train design (efficiency, acceleration, and mass). [ABSTRACT FROM AUTHOR]

China’s fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others. [ABSTRACT FROM AUTHOR]

Purpose: The 2014 outbreak of Ebola virus disease (EVD) in West Africa was the largest in history. Starting in September 2014, International Medical Corps (IMC) operated five Ebola treatment units (ETUs) in Sierra Leone and Liberia. This paper explores how future infectious disease outbreak facilities in resource-limited settings can be planned, organized, and managed by analyzing data collected on water, sanitation, and hygiene (WASH) and infection prevention control (IPC) protocols. Design/Methodology/Approach: We conducted a retrospective cohort study by analyzing WASH/IPC activity data routinely recorded on paper forms or white boards at ETUs during the outbreak and later merged into a database from two IMC-run ETUs in Sierra Leone between December 2014 and December 2015. Findings: The IMC WASH/IPC database contains data from over 369 days. Our results highlight parameters key to designing and maintaining an ETU. High concentration chlorine solution usage was highly correlated with both daily patient occupancy and high-risk zone staff entries; low concentration chlorine usage was less well explained by these measures. There is high demand for laundering and disinfecting of personal protective equipment (PPE) on a daily basis and approximately 1 (0–4) piece of PPE is damaged each day. Research limitations/Implications: Lack of standardization in the type and format of data collected at ETUs made constructing the WASH/IPC database difficult. However, the data presented here may help inform humanitarian response operations in future epidemics. [ABSTRACT FROM AUTHOR]

Several network features and information retrieval methods have been proposed to elucidate the structure of citation networks and to detect important nodes. However, it is difficult to retrieve information related to trends in an academic field and to detect cutting-edge areas from the citation network. In this paper, we propose a novel framework that detects the trend as the growth direction of a citation network using network representation learning(NRL). We presume that the linear growth of citation network in latent space obtained by NRL is the result of the iterative edge additional process of a citation network. On APS datasets and papers of some domains of the Web of Science, we confirm the existence of trends by observing that an academic field grows in a specific direction linearly in latent space. Next, we calculate each node’s degree of trend-following as an indicator called the intrinsic publication year (IPY). As a result, there is a correlation between the indicator and the number of future citations. Furthermore, a word frequently used in the abstracts of cutting-edge papers (high-IPY paper) is likely to be used often in future publications. These results confirm the validity of the detected trend for predicting citation network growth. [ABSTRACT FROM AUTHOR]

This paper presents an integrated hybrid optimization algorithm for training the radial basis function neural network (RBF NN). Training of neural networks is still a challenging exercise in machine learning domain. Traditional training algorithms in general suffer and trap in local optima and lead to premature convergence, which makes them ineffective when applied for datasets with diverse features. Training algorithms based on evolutionary computations are becoming popular due to their robust nature in overcoming the drawbacks of the traditional algorithms. Accordingly, this paper proposes a hybrid training procedure with differential search (DS) algorithm functionally integrated with the particle swarm optimization (PSO). To surmount the local trapping of the search procedure, a new population initialization scheme is proposed using Logistic chaotic sequence, which enhances the population diversity and aid the search capability. To demonstrate the effectiveness of the proposed RBF hybrid training algorithm, experimental analysis on publicly available 7 benchmark datasets are performed. Subsequently, experiments were conducted on a practical application case for wind speed prediction to expound the superiority of the proposed RBF training algorithm in terms of prediction accuracy. [ABSTRACT FROM AUTHOR]

Public transport (PT) is a key element in most major cities around the world. With the development of smartphones, available journey planning information is becoming an integral part of the PT system. Each traveler has specific preferences when undertaking a trip, and these preferences can also be reflected on the smartphone. This paper considers transit assignment in urban public-transport networks in which the passengers receive smartphone-based information containing elements that might influence the travel decisions in relation to line loads, as well as passenger benefits, and the paper discusses the transition from the current widespread choosing approach to a personalized decision-making approach based on smartphone information. The approach associated with smartphone guidance that considers passengers’ preference on travel time, waiting time and transfer is proposed in the process of obtaining his/her preferred route from the potential travel routes generated by the Deep First Search (DFS) method. Two other approaches, based on the scenarios reflecting reality, include passengers with access to no real time information, and passengers that only have access to the arrival time at the platform are used as comparisons. For illustration, the same network proposed by Spiess and Florian is utilized on the experiments in an agent-based model. Two experiments are conducted respectively according to whether each passenger’s choosing method is consistent. As expected, the results in the first experiment showed that the travel for consistent passengers with smartphone guidance was clearly shorter and that it can reduce travel time exceeding 15% and weighted cost exceeding 20%, and the average saved time approximated 3.88 minutes per passenger. The second experiment presented that travel cost, as well as cost savings, gradually decreased by employing smartphone guidance, and the maximum cost savings accounted for 14.2% of the total weighted cost. [ABSTRACT FROM AUTHOR]

Background: When attempting to statistically distinguish between a null and an alternative hypothesis, many researchers in the life and social sciences turn to binned statistical analysis methods, or methods that are simply based on the moments of a distribution (such as the mean, and variance). These methods have the advantage of simplicity of implementation, and simplicity of explanation. However, when null and alternative hypotheses manifest themselves in subtle differences in patterns in the data, binned analysis methods may be insensitive to these differences, and researchers may erroneously fail to reject the null hypothesis when in fact more sensitive statistical analysis methods might produce a different result when the null hypothesis is actually false. Here, with a focus on two recent conflicting studies of contagion in mass killings as instructive examples, we discuss how the use of unbinned likelihood methods makes optimal use of the information in the data; a fact that has been long known in statistical theory, but perhaps is not as widely appreciated amongst general researchers in the life and social sciences. Methods: In 2015, Towers et al published a paper that quantified the long-suspected contagion effect in mass killings. However, in 2017, Lankford & Tomek subsequently published a paper, based upon the same data, that claimed to contradict the results of the earlier study. The former used unbinned likelihood methods, and the latter used binned methods, and comparison of distribution moments. Using these analyses, we also discuss how visualization of the data can aid in determination of the most appropriate statistical analysis methods to distinguish between a null and alternate hypothesis. We also discuss the importance of assessment of the robustness of analysis results to methodological assumptions made (for example, arbitrary choices of number of bins and bin widths when using binned methods); an issue that is widely overlooked in the literature, but is critical to analysis reproducibility and robustness. Conclusions: When an analysis cannot distinguish between a null and alternate hypothesis, care must be taken to ensure that the analysis methodology itself maximizes the use of information in the data that can distinguish between the two hypotheses. The use of binned methods by Lankford & Tomek (2017), that examined how many mass killings fell within a 14 day window from a previous mass killing, substantially reduced the sensitivity of their analysis to contagion effects. The unbinned likelihood methods used by Towers et al (2015) did not suffer from this problem. While a binned analysis might be favorable for simplicity and clarity of presentation, unbinned likelihood methods are preferable when effects might be somewhat subtle. [ABSTRACT FROM AUTHOR]

Recommender systems are vulnerable to shilling attacks. Forged user-generated content data, such as user ratings and reviews, are used by attackers to manipulate recommendation rankings. Shilling attack detection in recommender systems is of great significance to maintain the fairness and sustainability of recommender systems. The current studies have problems in terms of the poor universality of algorithms, difficulty in selection of user profile attributes, and lack of an optimization mechanism. In this paper, a shilling behaviour detection structure based on abnormal group user findings and rating time series analysis is proposed. This paper adds to the current understanding in the field by studying the credibility evaluation model in-depth based on the rating prediction model to derive proximity-based predictions. A method for detecting suspicious ratings based on suspicious time windows and target item analysis is proposed. Suspicious rating time segments are determined by constructing a time series, and data streams of the rating items are examined and suspicious rating segments are checked. To analyse features of shilling attacks by a group user’s credibility, an abnormal group user discovery method based on time series and time window is proposed. Standard testing datasets are used to verify the effect of the proposed method. [ABSTRACT FROM AUTHOR]

How to effectively solve traffic congestion and transportation pollution in urban development is a main research emphasis for transportation management agencies. A carbon emissions tax can affect travelers’ generalized costs and will lead to changes in passenger demand, mode choice and traffic flow equilibrium in road networks, which are of significance in green travel and low-carbon transportation management. This paper first established a mesoscopic model to calculate the carbon emissions tax and determined the value of this charge in China, which was based on road traffic flow, vehicle speed, and carbon emissions. Referring to existing research results to calibrate the value of time, this paper modified the traveler’s generalized cost function, including the carbon emissions tax, fuel surcharge and travel time cost, which can be used in the travel impedance model with the consideration of the carbon emissions tax. Then, a method for analyzing urban road network traffic flow distribution was put forward, and a joint traffic distribution model was established, which considered the relationship between private cars and taxis. Finally, this paper took the city of Panjin as an example to analyze the road traffic carbon emissions tax’s impact. The results illustrated that the carbon emissions tax has a positive effect on road network flow equilibrium and carbon emission reduction. This paper will have good reference value and practical significance for the calculation and implementation of urban traffic carbon emissions taxes in China. [ABSTRACT FROM AUTHOR]

Background: In practical research, it was found that most people made health-related decisions not based on numerical data but on perceptions. Examples include the perceptions and their corresponding linguistic values of health risks such as, smoking, syringe sharing, eating energy-dense food, drinking sugar-sweetened beverages etc. For the sake of understanding the mechanisms that affect the implementations of health-related interventions, we employ fuzzy variables to quantify linguistic variable in healthcare modeling where we employ an integrated system dynamics and agent-based model. Methodology: In a nonlinear causal-driven simulation environment driven by feedback loops, we mathematically demonstrate how interventions at an aggregate level affect the dynamics of linguistic variables that are captured by fuzzy agents and how interactions among fuzzy agents, at the same time, affect the formation of different clusters(groups) that are targeted by specific interventions. Results: In this paper, we provide an innovative framework to capture multi-stage fuzzy uncertainties manifested among interacting heterogeneous agents (individuals) and intervention decisions that affect homogeneous agents (groups of individuals) in a hybrid model that combines an agent-based simulation model (ABM) and a system dynamics models (SDM). Having built the platform to incorporate high-dimension data in a hybrid ABM/SDM model, this paper demonstrates how one can obtain the state variable behaviors in the SDM and the corresponding values of linguistic variables in the ABM. Conclusions: This research provides a way to incorporate high-dimension data in a hybrid ABM/SDM model. This research not only enriches the application of fuzzy set theory by capturing the dynamics of variables associated with interacting fuzzy agents that lead to aggregate behaviors but also informs implementation research by enabling the incorporation of linguistic variables at both individual and institutional levels, which makes unstructured linguistic data meaningful and quantifiable in a simulation environment. This research can help practitioners and decision makers to gain better understanding on the dynamics and complexities of precision intervention in healthcare. It can aid the improvement of the optimal allocation of resources for targeted group (s) and the achievement of maximum utility. As this technology becomes more mature, one can design policy flight simulators by which policy/intervention designers can test a variety of assumptions when they evaluate different alternatives interventions. [ABSTRACT FROM AUTHOR]

Many important applications continuously generate data, such as financial transaction administration, satellite monitoring, network flow monitoring, and web information processing. The data mining results are always evolving with the newly generated data. Obviously, for the clustering task, it is better to incrementally update the new clustering results based on the old data rather than to recluster all of the data from scratch. The incremental clustering approach is an essential way to solve the problem of clustering with growing Big Data. This paper proposes a boundary-profile-based incremental clustering (BPIC) method to find arbitrarily shaped clusters with dynamically growing datasets. This method represents the existing clustering results with a collection of boundary profiles and discards the inner points of clusters rather than keep all data. It greatly saves both time and space storage costs. To identify the boundary profile, this paper presents a boundary-vector-based boundary point detection (BV-BPD) algorithm that summarizes the structure of the existing clusters. The BPIC method processes each new point in an online fashion and updates the clustering results in a batch mode. When a new point arrives, the BPIC method either immediately labels it or temporarily puts it into a bucket according to the relationship between the new data and the boundary profiles. A bucket is employed to distinguish the noise from the potential seeds of new clusters and alleviate the effects of data order. When the bucket is full, the BPIC method will cluster the data within it and update the clustering results. Thus, the BPIC method is insensitive to noise and the order of new data, which is critical for the robustness of the incremental clustering process. In the experiments, the performance of the boundary point detection algorithm BV-BPD is compared with the state-of-the-art method. The results show that the BV-BPD is better than the state-of-the-art method. Additionally, the performance of BPIC and other two incremental clustering methods are investigated in terms of clustering quality, time and space efficiency. The experimental results indicate that the BPIC method is able to get a qualified clustering result on a large dataset with higher time and space efficiency. [ABSTRACT FROM AUTHOR]