Search

Objectives: The purpose of our study was to determine the order in which science and health researchers read scientific papers, their reasons for doing so and the perceived difficulty and perceived importance of each section., Study Design and Setting: An online survey open to science and health academics and researchers distributed via existing research networks, X (formerly Twitter), and LinkedIn., Results: Almost 90% of respondents self-declared to be experienced in reading research papers. 98.6% of the sample read the abstract first because it provides an overview of the paper and facilitates a decision on continuing to read on or not. Seventy-five percent perceived it to be the easiest to read and 62.4% perceived it to be very important (highest rank on a 5-point Likert scale). The majority of respondents did not read a paper in the IMRAD (Introduction, Methods, Results And Discussion) format. Perceived difficulty and perceived importance influenced reading order., Conclusion: Science and health researchers do not typically read scientific and health research papers in IMRAD format. The more important a respondent perceives a section to be, the more likely they are to read it. The easier a section is perceived, the more likely it will be read. We present recommendations to those teaching the skill of writing scientific papers and reports., Competing Interests: The authors declared that no competing interests exist., (Copyright: © 2024 Shiely et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

How do author perceptions match up to the outcomes of the peer-review process and perceptions of others? In a top-tier computer science conference (NeurIPS 2021) with more than 23,000 submitting authors and 9,000 submitted papers, we surveyed the authors on three questions: (i) their predicted probability of acceptance for each of their papers, (ii) their perceived ranking of their own papers based on scientific contribution, and (iii) the change in their perception about their own papers after seeing the reviews. The salient results are: (1) Authors had roughly a three-fold overestimate of the acceptance probability of their papers: The median prediction was 70% for an approximately 25% acceptance rate. (2) Female authors exhibited a marginally higher (statistically significant) miscalibration than male authors; predictions of authors invited to serve as meta-reviewers or reviewers were similarly calibrated, but better than authors who were not invited to review. (3) Authors' relative ranking of scientific contribution of two submissions they made generally agreed with their predicted acceptance probabilities (93% agreement), but there was a notable 7% responses where authors predicted a worse outcome for their better paper. (4) The author-provided rankings disagreed with the peer-review decisions about a third of the time; when co-authors ranked their jointly authored papers, co-authors disagreed at a similar rate-about a third of the time. (5) At least 30% of respondents of both accepted and rejected papers said that their perception of their own paper improved after the review process. The stakeholders in peer review should take these findings into account in setting their expectations from peer review.

Paper mulberry pollen, declared a pest in several countries including Pakistan, can trigger severe allergies and cause asthma attacks. We aimed to develop an algorithm that could accurately predict high pollen days to underpin an alert system that would allow patients to take timely precautionary measures. We developed and validated two prediction models that take historical pollen and weather data as their input to predict the start date and peak date of the pollen season in Islamabad, the capital city of Pakistan. The first model is based on linear regression and the second one is based on phenological modelling. We tested our models on an original and comprehensive dataset from Islamabad. The mean absolute errors (MAEs) for the start day are 2.3 and 3.7 days for the linear and phenological models, respectively, while for the peak day, the MAEs are 3.3 and 4.0 days, respectively. These encouraging results could be used in a website or app to notify patients and healthcare providers to start preparing for the paper mulberry pollen season. Timely action could reduce the burden of symptoms, mitigate the risk of acute attacks and potentially prevent deaths due to acute pollen-induced allergy.

Threatened shark species are caught in large numbers by artisanal and commercial fisheries and traded globally. Monitoring both which shark species are caught and sold in fisheries, and the export of CITES-restricted products, are essential in reducing illegal fishing. Current methods for species identification rely on visual examination by experts or DNA barcoding techniques requiring specialist laboratory facilities and trained personnel. The need for specialist equipment and/or input from experts means many markets are currently not monitored. We have developed a paper-based Lab-on-a-Chip (LOC) to facilitate identification of three threatened and CITES-listed sharks, bigeye thresher (Alopias superciliosus), pelagic thresher (A. pelagicus) and shortfin mako shark (Isurus oxyrinchus) at market source. DNA was successfully extracted from shark meat and fin samples and combined with DNA amplification and visualisation using Loop Mediated Isothermal Amplification (LAMP) on the LOC. This resulted in the successful identification of the target species of sharks in under an hour, with a working positive and negative control. The LOC provided a simple "yes" or "no" result via a colour change from pink to yellow when one of the target species was present. The LOC serves as proof-of-concept (PoC) for field-based species identification as it does not require specialist facilities. It can be used by non-scientifically trained personnel, especially in areas where there are suspected high frequencies of mislabelling or for the identification of dried shark fins in seizures.

Anti-neutrophil cytoplasmic antibody (ANCA) associated vasculitis (AAV) is a chronic, relapsing-remitting condition associated with increased morbidity. Previous research has shown patients with AAV report high levels of fatigue, pain, depression and anxiety. Over recent years successful work has been carried out to improve clinical outcomes, resulting in reduced mortality and end stage kidney disease (ESKD). Despite this, little work has been done to better understand the role of the patient within this condition. The prevalence of AAV is increasing and to date, there is a shortage of specific tools that assess and measure key features relating to patient reported outcomes (PROs). This protocol details how we can better understand the lived experiences of those with AAV through the development of a disease specific, patient reported outcome measure (PROM), to be used in clinic practice. This will allow us to recognise and validate PROs and the impact the disease and its treatment has on patients' health related quality of life (HRQoL). In addition, we aim to identify potential differences in PRO's between demographics, organ involvement and treatment subgroups in AAV as well as outcomes relating to the patient experience. Patients from a single centre in the UK will be recruited to take part in the exploratory qualitative study which will include focus groups and semi-structured interviews. The inclusion criteria comprise anyone with a diagnosis of AAV and willing to participate, including those who have active or relapsing disease, those are economically active, unemployed, retired and patients receiving renal replacement therapy. The aim of the project is to identify key issues patients experience in relation to their disease and its management and how these can be better assessed in a new PROM developed for use in the clinic setting. This will enable better delivery of individualised care and inform shared decision making, while also serving as a platform for future research looking at PROs in other glomerulonephritides.

Threatened shark species are caught in large numbers by artisanal and commercial fisheries and traded globally. Monitoring both which shark species are caught and sold in fisheries, and the export of CITES-restricted products, are essential in reducing illegal fishing. Current methods for species identification rely on visual examination by experts or DNA barcoding techniques requiring specialist laboratory facilities and trained personnel. The need for specialist equipment and/or input from experts means many markets are currently not monitored. We have developed a paper-based Lab-on-a-Chip (LOC) to facilitate identification of three threatened and CITES-listed sharks, bigeye thresher (Alopias superciliosus), pelagic thresher (A. pelagicus) and shortfin mako shark (Isurus oxyrinchus) at market source. DNA was successfully extracted from shark meat and fin samples and combined with DNA amplification and visualisation using Loop Mediated Isothermal Amplification (LAMP) on the LOC. This resulted in the successful identification of the target species of sharks in under an hour, with a working positive and negative control. The LOC provided a simple "yes" or "no" result via a colour change from pink to yellow when one of the target species was present. The LOC serves as proof-of-concept (PoC) for field-based species identification as it does not require specialist facilities. It can be used by non-scientifically trained personnel, especially in areas where there are suspected high frequencies of mislabelling or for the identification of dried shark fins in seizures., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Tiktak et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Anti-neutrophil cytoplasmic antibody (ANCA) associated vasculitis (AAV) is a chronic, relapsing-remitting condition associated with increased morbidity. Previous research has shown patients with AAV report high levels of fatigue, pain, depression and anxiety. Over recent years successful work has been carried out to improve clinical outcomes, resulting in reduced mortality and end stage kidney disease (ESKD). Despite this, little work has been done to better understand the role of the patient within this condition. The prevalence of AAV is increasing and to date, there is a shortage of specific tools that assess and measure key features relating to patient reported outcomes (PROs). This protocol details how we can better understand the lived experiences of those with AAV through the development of a disease specific, patient reported outcome measure (PROM), to be used in clinic practice. This will allow us to recognise and validate PROs and the impact the disease and its treatment has on patients' health related quality of life (HRQoL). In addition, we aim to identify potential differences in PRO's between demographics, organ involvement and treatment subgroups in AAV as well as outcomes relating to the patient experience. Patients from a single centre in the UK will be recruited to take part in the exploratory qualitative study which will include focus groups and semi-structured interviews. The inclusion criteria comprise anyone with a diagnosis of AAV and willing to participate, including those who have active or relapsing disease, those are economically active, unemployed, retired and patients receiving renal replacement therapy. The aim of the project is to identify key issues patients experience in relation to their disease and its management and how these can be better assessed in a new PROM developed for use in the clinic setting. This will enable better delivery of individualised care and inform shared decision making, while also serving as a platform for future research looking at PROs in other glomerulonephritides., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Floyd et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Background: Commercial electroencephalography (EEG) devices have become increasingly available over the last decade. These devices have been used in a wide variety of fields ranging from engineering to cognitive neuroscience. Purpose: The aim of this study was to chart peer-review articles that used consumer-grade EEG devices to collect neural data. We provide an overview of the research conducted with these relatively more affordable and user-friendly devices. We also inform future research by exploring the current and potential scope of consumer-grade EEG. Methods: We followed a five-stage methodological framework for a scoping review that included a systematic search using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews (PRISMA-ScR) guidelines. We searched the following online databases: PsycINFO, MEDLINE, Embase, Web of Science, and IEEE Xplore. We charted study data according to application (BCI, experimental research, validation, signal processing, and clinical) and location of use as indexed by the first author's country. Results: We identified 916 studies that used data recorded with consumer-grade EEG: 531 were reported in journal articles and 385 in conference papers. Emotiv devices were used most, followed by the NeuroSky MindWave, OpenBCI, interaXon Muse, and MyndPlay Mindband. The most common usage was for brain-computer interfaces, followed by experimental research, signal processing, validation, and clinical purposes. Conclusions: Consumer-grade EEG is a useful tool for neuroscientific research and will likely continue to be used well into the future. Our study provides a comprehensive review of their application, as well as future directions for researchers who plan to use these devices. [ABSTRACT FROM AUTHOR]

Multiple studies across a variety of scientific disciplines have shown that the number of times that a paper is shared on Twitter (now called X) is correlated with the number of citations that paper receives. However, these studies were not designed to answer whether tweeting about scientific papers causes an increase in citations, or whether they were simply highlighting that some papers have higher relevance, importance or quality and are therefore both tweeted about more and cited more. The authors of this study are leading science communicators on Twitter from several life science disciplines, with substantially higher follower counts than the average scientist, making us uniquely placed to address this question. We conducted a three-year-long controlled experiment, randomly selecting five articles published in the same month and journal, and randomly tweeting one while retaining the others as controls. This process was repeated for 10 articles from each of 11 journals, recording Altmetric scores, number of tweets, and citation counts before and after tweeting. Randomization tests revealed that tweeted articles were downloaded 2.6–3.9 times more often than controls immediately after tweeting, and retained significantly higher Altmetric scores (+81%) and number of tweets (+105%) three years after tweeting. However, while some tweeted papers were cited more than their respective control papers published in the same journal and month, the overall increase in citation counts after three years (+7% for Web of Science and +12% for Google Scholar) was not statistically significant (p > 0.15). Therefore while discussing science on social media has many professional and societal benefits (and has been a lot of fun), increasing the citation rate of a scientist's papers is likely not among them. [ABSTRACT FROM AUTHOR]

This study was aimed to identify football research trends in various periods. A total of 30,946 football papers were collected from a representative academic database and search engine, the 'Web of Science'. Keyword refinement included filtering nouns, establishing synonyms and thesaurus, and excluding conjunctions, and the Cyram's Netminer 4.0 software was used for network analysis. A centrality analysis was conducted by extracting the words corresponding to the top 2% of the main research topics to obtain the degree and eigenvector centralities. The most frequently mentioned research keywords were injury, performance, and club. Keyword performance showed the highest degree centrality (0.294) and keyword world and cup showed the highest eigenvector centrality (0.710). The keyword with the highest eigenvector degree changed from injury in the 1990s and world in the 2000s to cup since the 2010s. Although various studies on football injuries have been conducted, research on the sport itself has recently been conducted. This study provides fundamental information on football trends from research published over the past 30 years. [ABSTRACT FROM AUTHOR]

This paper takes the establishment of the Green Financial Reform and Innovation Pilot Zone (GFPZ) in 2017 as a natural experiment, adopts the data of a-share industrial listed enterprises in Shanghai and Shenzhen from 2010 to 2020, and utilizes the difference-in-differences (DID) method to carry out empirical tests. The results show that (1) GFPZ policy significantly improves the environmental, social, and governance (ESG) performance of enterprises, and the positive effect is mainly realized by improving the external financing ability and green-technology innovation level of enterprises. (2) There is heterogeneity in the impact of GFPZ policy on the ESG performance of firms with different equity natures and internal control levels. (3) Green finance promotes active corporate social responsibility, and it can further improve environmental governance in the regions where it operates. This paper provides a useful supplement to the comprehensive understanding of green-finance policy effects and ESG impact factors, and it is of great significance in mitigating the negative environmental and social externalities caused by the excessive pursuit of economic benefits by enterprises. [ABSTRACT FROM AUTHOR]

While the musical instrument classification task is well-studied, there remains a gap in identifying non-pitched percussion instruments which have greater overlaps in frequency bands and variation in sound quality and play style than pitched instruments. In this paper, we present a musical instrument classifier for detecting tambourines, maracas and castanets, instruments that are often used in early childhood music education. We generated a dataset with diverse instruments (e.g., brand, materials, construction) played in different locations with varying background noise and play styles. We conducted sensitivity analyses to optimize feature selection, windowing time, and model selection. We deployed and evaluated our best model in a mixed reality music application with 12 families in a home setting. Our dataset was comprised of over 369,000 samples recorded in-lab and 35,361 samples recorded with families in a home setting. We observed the Light Gradient Boosting Machine (LGBM) model to perform best using an approximate 93 ms window with only 12 mel-frequency cepstral coefficients (MFCCs) and signal entropy. Our best LGBM model was observed to perform with over 84% accuracy across all three instrument families in-lab and over 73% accuracy when deployed to the home. To our knowledge, the dataset compiled of 369,000 samples of non-pitched instruments is first of its kind. This work also suggests that a low feature space is sufficient for the recognition of non-pitched instruments. Lastly, real-world deployment and testing of the algorithms created with participants of diverse physical and cognitive abilities was also an important contribution towards more inclusive design practices. This paper lays the technological groundwork for a mixed reality music application that can detect children's use of non-pitched, percussion instruments to support early childhood music education and play. [ABSTRACT FROM AUTHOR]

Background: The global outbreak of COVID-19 has brought to light the profound impact that large-scale disease outbreaks can have on healthcare systems and the dedicated professionals who serve within them. It becomes increasingly important to explore strategies for retaining nurses and physicians within hospital settings during such challenging times. This paper aims to investigate the determinants of retention among nurses and physicians during the COVID-19 pandemic. Method: A systematic review of other potential determinants impacting retention rates during the pandemic was carried out. Secondly, a meta-analysis on the prevalence of intention to leave for nurses and physicians during the COVID-19 pandemic. Findings: A comprehensive search was performed within four electronic databases on March 17 2023. Fifty-five papers were included in the systematic review, whereas thirty-three papers fulfilled the eligibility criteria for the meta-analysis. The systematic review resulted in six themes of determinants impacting intention to leave: personal characteristics, job demands, employment services, working conditions, work relationships, and organisational culture. The main determinants impacting the intention to leave are the fear of COVID-19, age, experience, burnout symptoms and support. Meta-analysis showed a prevalence of intent to leave the current job of 38% for nurses (95% CI: 26%-51%) and 29% for physicians (95% CI: 21%-39%), whereas intention to leave the profession for nurses 28% (95% CI: 21%-34%) and 24% for physicians (95% CI: 23%-25%). Conclusion: The findings of this paper showed the critical need for hospital managers to address the concerning increase in nurses' and physicians' intentions to leave during the COVID-19 pandemic. This intention to leave is affected by a complex conjunction of multiple determinants, including the fear of COVID-19 and the confidence in and availability of personal protective equipment. Moreover, individual factors like age, experience, burnout symptoms, and support are maintained in this review. Understanding the influence of determinants on retention during the COVID-19 pandemic offers an opportunity to formulate prospective strategies for retaining nurses and physicians within hospital settings. [ABSTRACT FROM AUTHOR]

From the beginning of the Iraq war, in March of 2003, to the present day, controversy has swirled around the death toll of the war. This paper narrows down the range of uncertainty for the numbers and trends in violent deaths in the war. I assemble and appraise all primary sources that cover the period from March of 2003 onwards—six sample surveys plus a casualty recording project (Iraq Body Count [IBC]). Data permitting, I present cumulative monthly figures with, for the surveys, 95% bootstrapped uncertainty intervals. The analysis uncovers a core of high-quality mainstream sources that are highly consistent with each another. In addition, there are three outlier surveys that are compromised by serious flaws and produce estimates far outside the mainstream. Discarding the outlying and flawed surveys reveals a clear picture of the violent death toll from the Iraq war. IBC figures, extended to include combatants, occupy a central position within the mainstream range of estimates. The strong consistency across the high-quality sources provides a rare validation of three war-death-measurement methodologies—household-based surveys, sibling-based surveys, and casualty recording. Methodological success notwithstanding, we must transcend the numbers to truly comprehend the human costs of the war. [ABSTRACT FROM AUTHOR]

Previously observed negative correlations between sample size and effect size (n-ES correlation) in psychological research have been interpreted as evidence for publication bias and related undesirable biases. Here, we present two studies aimed at better understanding to what extent negative n-ES correlations reflect such biases or might be explained by unproblematic adjustments of sample size to expected effect sizes. In Study 1, we analysed n-ES correlations in 150 meta-analyses from cognitive, organizational, and social psychology and in 57 multiple replications, which are free from relevant biases. In Study 2, we used a random sample of 160 psychology papers to compare the n-ES correlation for effects that are central to these papers and effects selected at random from these papers. n-ES correlations proved inconspicuous in meta-analyses. In line with previous research, they do not suggest that publication bias and related biases have a strong impact on meta-analyses in psychology. A much higher n-ES correlation emerged for publications' focal effects. To what extent this should be attributed to publication bias and related biases remains unclear. [ABSTRACT FROM AUTHOR]

The recognition of food images is of great significance for nutrition monitoring, food retrieval and food recommendation. However, the accuracy of recognition had not been high enough due to the complex background of food images and the characteristics of small inter-class differences and large intra-class differences. To solve these problems, this paper proposed a food image recognition method based on transfer learning and ensemble learning. Firstly, generic image features were extracted by using the convolutional neural network models (VGG19, ResNet50, MobileNet V2, AlexNet) pre-trained on the ImageNet dataset. Secondly, the 4 pre-trained models were transferred to the food image dataset for model fine-tuning. Finally, different basic learner combination strategies were adopted to establish the ensemble model and classify feature information. In this paper, several kinds of experiments were performed to compare the results of food image recognition between single models and ensemble models on food-11 dataset. The experimental results demonstrated that the accuracy of the ensemble model was the highest, reaching 96.88%, which was superior to any base learner. Therefore, the convolutional neural network model based on transfer learning and ensemble learning has strong learning ability and generalization ability, and it is feasible and practical to apply the method to food image recognition. [ABSTRACT FROM AUTHOR]

The rapid increase in the number of older people under the background of population aging has gradually changed the disease spectrum of society, making aging diseases more prevalent, and increasing the demand for health care services, medical and health services, and health insurance among older people, ultimately leading to increasing household and social spending on old age. This study is conducted to assess the impact of those spending burden on the sustainable development of economy and find out some practical and effective solutions. This paper constructs a theoretical model to illustrate the relationship between the old-age dependency ratio and the marginal product of capital (MPK), and then establishes a two-way fixed effect model based on transnational panel data of 81 countries from 1981 to 2017 to verify this relationship empirically. This paper finds that, after controlling a series of variables, an increased burden of old-age dependency leads to a decline in the MPK, a key macroeconomic variable and also a sustainable development criteria, but in which health care, health security systems, and technological innovation play a key and moderating role. The conclusion is also valid after tackling the problem of endogeneity with different methods, like two-stage least squares (TSLS) and the generalized methods of moments (GMM). Overall, before population aging, countries that are old-but-not-rich should encourage more supply-side investments in public health system or technological innovation, and adjust retirement system, or gradually encourage childbearing to strive for time and space for later sustainable development of public health system and economy. [ABSTRACT FROM AUTHOR]

Background: Self-harm and suicide behaviours are a major public health concern. Several factors are associated with these behaviours among military communities. Identifying these factors may have important implications for policy and clinical services. The aim of this review was to identify the risk and protective factors associated with self-harm and suicide behaviours among serving and ex-serving personnel of the United Kingdom Armed Forces, Canadian Armed Forces, Australian Defence Force and New Zealand Defence Force. Methods: A systematic search of seven online databases (PubMed, Web of Science, Embase, Global Health, PsycINFO, PTSDpubs and CINAHL) was conducted alongside cross-referencing, in October 2022. Following an a priori PROSPERO approved protocol (CRD42022348867), papers were independently screened and assessed for quality. Data were synthesised using a narrative approach. Results: Overall, 28 papers were included: 13 from Canada, 10 from the United Kingdom, five from Australia and none from New Zealand. Identified risk factors included being single/ex-relationship, early service leavers, shorter length of service (but not necessarily early service leavers), junior ranks, exposure to deployment-related traumatic events, physical and mental health diagnoses, and experience of childhood adversity. Protective factors included being married/in a relationship, higher educational attainment, employment, senior ranks, and higher levels of perceived social support. Conclusion: Adequate care and support are a necessity for the military community. Prevention and intervention strategies for self-harm and suicide behaviours may be introduced early and may promote social networks as a key source of support. This review found a paucity of peer-reviewed research within some populations. More peer-reviewed research is needed, particularly among these populations where current work is limited, and regarding modifiable risk and protective factors. [ABSTRACT FROM AUTHOR]

Purpose: Savouring interventions aim to amplify the intensity and duration of positive feelings and positive affect. Research has shown that the potential benefits of savouring include the promotion of psychological well-being and diminution of negative affective states. Savouring strategies may be particularly useful amongst clinical populations in changing biobehavioural processes which can strengthen an individual's propensity to exert control over how to develop, intensify and promote psychological well-being, while simultaneously mitigating negative affective states. This paper outlines a protocol for a systematic review that will be used to identify, critically appraise and synthesise findings of studies examining the effectiveness of savouring interventions in adult clinical populations. Savouring interventions will be defined broadly, operationalised as any savouring strategy focusing on past, present or future events or experiences whereby participants are instructed to attend to and amplify positive affect relating to same. The goal of our review is to include the extent of the literature on this topic and contribute to the overall evidence to support savouring interventions. Methods: This protocol is carried out in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Protocols Guidelines. The protocol has been registered with PROSPERO (CRD42023404857). The databases PsycINFO, PubMed, CINAHL (Cumulative Index to Nursing and Allied Health Literature), and Scopus will be searched alongside a search of grey literature. An examination of the first 200 papers on Google Scholar will also be done to identify relevant papers. Studies describing randomised controlled trials evaluating the effects of savouring interventions as described within this article on adult clinical populations will be included in the review. Outcomes will include well-being, quality of life, depression, anxiety or stress. Study selection and data extraction will be completed by three independent reviewers to reduce risk of bias. Interrater percentage agreement and interrater reliability will be reported on same. The quality of studies will be assessed using criteria based on the Cochrane Collaboration's tool for assessing risk of bias and the Jadad scale. A narrative synthesis with tables of study characteristics will be provided. Separate considerations of the three time perspectives of savouring interventions (past-focused, present-focused, and future-focused) will also be described. Conclusions: This systematic review will provide important clinical insights into the potential efficacy of savouring interventions when working with adult clinical samples. [ABSTRACT FROM AUTHOR]

During the COVID-19 pandemic, concerns were raised that face covering use may elicit risk compensation; a false sense of security resulting in reduced adherence to other protective behaviours such as physical distancing. This systematic review aimed to investigate the effect of face covering use on adherence to other COVID-19 related protective behaviours. Medline, Embase, PsychInfo, EmCare, medRxiv preprints, Research Square and WHO COVID-19 Research Database were searched for all primary research studies published from 1st January 2020 to 17th May 2022 that investigated the effect of face covering use on adherence to other protective behaviours in public settings during the COVID-19 pandemic. Papers were selected and screened in accordance with the PRISMA framework. Backwards and forwards citation searches of included papers were also conducted on 16th September 2022, with eligible papers published between 1st January 2020 and that date being included. A quality appraisal including risk of bias was assessed using the Academy of Nutrition and Dietetics' Quality Criteria Checklist. This review is registered on PROSPERO, number CRD42022331961. 47 papers were included, with quality ranging from low to high. These papers investigated the effects of face covering use and face covering policies on adherence to six categories of behaviour: physical distancing; mobility; face-touching; hand hygiene; close contacts; and generalised protective behaviour. Results reveal no consistent evidence for or against risk compensation, with findings varying according to behaviour and across study types, and therefore confident conclusions cannot be made. Any policy decisions related to face coverings must consider the inconsistencies and caveats in this evidence base. [ABSTRACT FROM AUTHOR]

Space medicine is a vital discipline with often time-intensive and costly projects and constrained opportunities for studying various elements such as space missions, astronauts, and simulated environments. Moreover, private interests gain increasing influence in this discipline. In scientific disciplines with these features, transparent and rigorous methods are essential. Here, we undertook an evaluation of transparency indicators in publications within the field of space medicine. A meta-epidemiological assessment of PubMed Central Open Access (PMC OA) eligible articles within the field of space medicine was performed for prevalence of code sharing, data sharing, pre-registration, conflicts of interest, and funding. Text mining was performed with the rtransparent text mining algorithms with manual validation of 200 random articles to obtain corrected estimates. Across 1215 included articles, 39 (3%) shared code, 258 (21%) shared data, 10 (1%) were registered, 110 (90%) contained a conflict-of-interest statement, and 1141 (93%) included a funding statement. After manual validation, the corrected estimates for code sharing, data sharing, and registration were 5%, 27%, and 1%, respectively. Data sharing was 32% when limited to original articles and highest in space/parabolic flights (46%). Overall, across space medicine we observed modest rates of data sharing, rare sharing of code and almost non-existent protocol registration. Enhancing transparency in space medicine research is imperative for safeguarding its scientific rigor and reproducibility. [ABSTRACT FROM AUTHOR]

To overcome the problem of the high initial position of the point cloud required by the traditional Iterative Closest Point (ICP) algorithm, in this paper, we propose a point cloud registration method based on normal vector and directional histogram features (SHOT). Firstly, a hybrid filtering method based on the voxel idea is proposed and verified using the measured point cloud data, and the noise removal rates of 97.5%, 97.8%, and 93.8% are obtained. Secondly, in terms of feature point extraction, the original algorithm is optimized, and the optimized algorithm can better extract the missing part of the point cloud. Finally, a fine alignment method based on normal vector and directional histogram features (SHOT) is proposed, and the improved algorithm is compared with the existing algorithm. Taking the Stanford University point cloud data and the self-measured point cloud data as examples, the plotted iteration-error plots can be concluded that the improved method can reduce the number of iterations by 40.23% and 37.62%, respectively. [ABSTRACT FROM AUTHOR]

The text describes improvements made to the random forest model to enhance its distinctiveness in addressing tax risks within the real estate industry, thereby tackling issues related to tax losses. Firstly, the paper introduces the potential application of the random forest model in identifying tax risks. Subsequently, the experimental analysis focuses on the selection of indicators for tax risk. Finally, the paper develops and utilizes actual taxpayer data to test a risk identification model, confirming its effectiveness. The experimental results indicate that the model's output report includes basic taxpayer information, a summary of tax compliance risks, value-added tax refund situations, directions of suspicious items, and detailed information on common indicators. This paper comprehensively presents detailed taxpayer data, providing an intuitive understanding of tax-related risks. Additionally, the paper reveals the level of enterprise risk registration assessment, risk probability, risk value, and risk assessment ranking. Further analysis shows that enterprise risk points primarily exist in operating income, selling expenses, financial expenses, and total profit. Additionally, the results indicate significant differences between the model's judgment values and declared values, especially in the high-risk probability of total operating income and profit. This implies a significant underreporting issue concerning corporate income tax for real estate enterprises. Therefore, this paper contributes to enhancing the identification of tax risks for real estate enterprises. Using the optimized random forest model makes it possible to accurately assess enterprises' tax compliance risks and identify specific risk points. [ABSTRACT FROM AUTHOR]

Since the concept of toughness was introduced to transportation systems, transportation system toughness has received extensive attention from researchers in the field of transportation worldwide. In this paper, a methodology for quantifying and assessing the toughness of urban transportation systems is proposed in the context of the New Crown epidemic. Firstly, the definition of urban transportation system toughness in this context is clarified, and the entropy evaluation method is applied to construct the performance curve of urban transportation systems over time. Then, it is proposed to quantify the system's resistance, recovery, and adaptive ability in terms of the change in the cumulative amount of system performance. Finally, the three characteristic abilities of system toughness are organically combined to obtain a comprehensive assessment of system toughness. Example calculations and analyses are carried out in four Chinese cities with different levels of development, and the results show that the performance of urban transportation systems is positively correlated with their levels of development, and all of them fluctuate greatly under the influence of the epidemic, but Wuhan has the strongest resistance and recovery ability of the transportation system, and shows the highest toughness, followed by Lanzhou, Changchun, and Shanghai. The system toughness quantification and assessment methods proposed in this paper provide a reference for research on improving the ability of urban transportation systems to deal with multiple uncertainty disturbances. [ABSTRACT FROM AUTHOR]

This study is a comprehensive assessment of the waste management system in Besisahar municipality. Information and some data have been collected from the municipality of Besisahar, followed by interviews with municipal officials responsible for waste management, stakeholders, waste workers, and residents. A total of 230 households, 20 schools, 10 government and private offices, 10 financial institutions, 60 commercial hotels, restaurants, and shops, and 20 medical shops and healthcare institutions, were selected in this study by random sampling. An extensive field study was conducted within all municipal wards and at dump sites. The results indicated that 42.14% of solid waste was collected through door-to-door collection services, 5.87% was mismanaged in open public places, 11.21% was used as compost manure, and the rest was discarded on riverbanks, dug up, and burned. A large component of the characterization of household waste consisted of organic waste (68.03%), followed by paper/paper products (8.13%), agricultural waste (5.5%), plastic (5.21%), construction (3.81%), textile (2.72%), metals (0.54%), glass (1.01%), rubber (0.10%), electronic (0.05%), pharmaceutical (0.1%) and others (4.78%) in the Besishahar municipality. Solid waste generation was found to be at 197.604 g/capita/day, as revealed by cluster sampling in 230 households. Around 4.285 tons-solid waste/day were generated in urban areas, while 16.13 tons-solid waste/day was estimated for the whole municipality. An important correlation between the parameters of solid waste was found by statistical analysis. Currently, solid waste is dumped on riverbanks, open fields, and springs, creating environmental and health hazards. The findings of this study will be useful to Besisahar municipality and its stakeholders in forming policies that facilitate waste management practices in this region and promote sustainable waste management systems. [ABSTRACT FROM AUTHOR]

Marine fishery carbon emissions play a significant role in agricultural carbon emissions, making resource allocation a crucial topic for the overall marine ecological protection. This paper evaluates the dynamic iteration method as a research approach with the factors of resource allocation consisting of value assessment, optimization objective, difference between value assessment and objective, and optimization calculation. The paper selects the shadow price from the Super-SBM model as the judgment function for the goal value, aiming for the fairness criterion. From an equity standpoint, the allocation of carbon resources in marine capture fisheries proves to be unreasonable. The fishery model exhibits an excessive supply of carbon resources, resulting in wastage, while the green fishery model faces a relatively limited supply, with a focus on energy conservation and environmental protection. To address this issue, this paper proposes a new method and discusses the corrective results. This result shows that the stabilization point achieved is a short-term equilibrium rather than a long-term one. By rectifying the social contradiction of profit-oriented approaches, this research provides a fresh perspective for economic studies and applications, particularly in industrial layout and resource utilization optimization. [ABSTRACT FROM AUTHOR]

The regional networking strategy is widely implemented in China as a normative policy aimed at fostering cohesion and enhancing competitiveness. However, the empirical basis for this strategy remains relatively weak due to limitations in measurement methods and data availability. This paper establishes the urban networks by the enterprise investment data, and then accurately measures the network's external effects of each city by the method of MGWR model. The results show that: (1) Regional networking plays a significant role in urban development, although it is not the dominant factor. (2) The benefits of network connections may vary depending on the location and level of cities. (3) The major cities assume a pivotal role in the urban network. Based upon the aforementioned research conclusions, this paper presents strategic measures to enhance the network's external impacts, aiming to offer insights for other regions in formulating regional development strategies and establishing regional urban networks. [ABSTRACT FROM AUTHOR]

Simultaneously achieving economic development and environmental protection is a shared global challenge. While the positive effect of environmental regulations on protecting the environment has been widely recognized, the attention paid to low-carbon governance and corporate green transformation remains insufficient. Based on the two-stage least square regression model (2SLS) of instrumental variables, this paper utilizes panel data from China to identify the influence mechanism of government low-carbon governance on enterprise green development. It explores the effect of low-carbon governance on enterprise green development from the perspective of fiscal decentralization. The findings show that (1) Low-carbon governance significantly promotes corporate green development, primarily through improving industrial structure and technological innovation; (2) Low-carbon governance notably promotes the green development of private enterprises but has little effect on state-owned enterprises. There are also geographical differences, and the results are better in Eastern China than in the Central and Western parts of China; (3) Fiscal decentralization at both central and local levels inhibits the effect of low-carbon governance on driving corporate green development by causing a mismatch of human resources. Therefore, to promote corporate green development, low-carbon governance must prioritize green development, actively guide industrial structural upgrading and enterprise technological innovation, implement differentiated low-carbon governance measures tailored to different ownership enterprises, and optimize the assessment indicators for fiscal decentralization. This paper helps deepen the understanding of the relationship between government low-carbon governance and enterprise green development in developing countries. It can be used as a reference for government departments to formulate relevant policies. [ABSTRACT FROM AUTHOR]

Sustainable agricultural economic development is the core task for achieving the objective of rural revitalization strategy in China, which cannot be separated from the support and guidance of fiscal policy, and agricultural industry integration is a key path for the fiscal promotion of sustainable agricultural economic development. This paper systematically examines the interaction mechanism between fiscal agricultural expenditures and sustainable agricultural economic development by using 31 provincial panel data in China from 2008 to 2020 and adopting a two-way fixed effect model, a panel quantile model, and a mediating effect model, respectively. The results show that the impact of fiscal agricultural expenditures on sustainable agricultural economic development is significantly positive, and appears a dynamic increasing trend with the agricultural development stage upgrading. Moreover, heterogeneity analysis shows that the effect of fiscal agricultural expenditures is more obvious for the samples in the central region and with a high share of primary industry. Further, a mediating effect test finds that agricultural industry integration plays a mediating mechanism between fiscal agricultural expenditures and sustainable agricultural economic development. Therefore, this paper proposes constructing a long-term investment mechanism for fiscal agricultural expenditures, formulating differentiated fiscal support policies for agriculture, and prioritizing support for agricultural industry integration, which provides theoretical support and policy inspiration for promoting sustainable agricultural economic development. [ABSTRACT FROM AUTHOR]

The delineation of the open-pit mining boundary, particularly in the context of medium to long-term planning, forms the foundation of mining design. However, due to the non-linear and dynamic nature of the economic and technical parameters influencing boundary delineation, determining the optimal mining boundary can be exceedingly challenging. Currently, most boundary optimization methods assume that block parameters remain fixed, which results in enterprises assuming a certain level of risk when facing changes in internal and external conditions. In this regard, this paper introduces the concept of "achievement degree" to reflect the risk associated with the results of boundary design. Using coal prices as an example, this article applies the predicted coal price curve to boundary optimization adjustments by specifying the "achievement degree" requirements for various time periods, thereby facilitating risk-controlled and economically optimal boundary decisions. Taking the illustrative case of an idealized small-scale inclined coal seam open-pit mine, adjustments to the boundary closely track variations in coal prices, further enhancing returns. The results demonstrate that the method proposed in this paper can increase overall revenue by approximately 51.15% within the forecast period, while effectively managing risks. [ABSTRACT FROM AUTHOR]

With the rapid development of China's economy and society, the innovation of grassroots social governance has become increasingly important. This paper constructs 35 grassroots social governance innovation samples. Using the TOE theoretical framework and a fuzzy set qualitative comparative analysis (fsQCA), this paper analyzes the joint effects and interactive relationships of multiple factors on grassroots social governance innovation performance from three dimensions: technology, organization, and environment. The research reveals that internal environmental openness is a necessary condition for achieving high innovation performance in grassroots social governance, and proposes four grouping models that affect the performance of grassroots social governance innovation. This paper explores the inner logic of grassroots social governance innovation from a histological perspective, and on this basis proposes an adaptive path to enhance the performance of grassroots social governance innovation. [ABSTRACT FROM AUTHOR]

With the advancement of touch screen technology, the application of touch screens in civil aircraft cockpits has become increasingly popular. However, further analysis and research are required to fully promote its applications. The paper researched the usability of touch screens in aircraft cockpit considering the operation performance and subjective NASA-TLX workload evaluation, conducted experimental research on three touch gestures: click, drag, and zoom. Additionally, a comparative analysis was conducted on the touch performance under different layouts, positions, touch sizes, dragging direction angles, and zoom multiples. The touch performance indicators include operation time, error rate, operation speed, and workload. The experimental results show that the 21 mm size has the minimum operation time and workload, and 18 mm size has the lowest error rate in the clicking tasks. Additionally, the performance and workload of the captain's layout are better than those of the co-pilot's layout, and the performance of the center console position is best. The operation speed of the dragging tasks is faster when performed at position R3 compared to other positions. The dragging moving angles with better operation speed are 80°-190° and 250°-290°. The operation performance and workload of the zooming tasks vary depending on the zoom multiples. As the multiple increases, the operation time and workload also increase. There is no difference in operation performance or workload between zooming in and zooming out. The paper provides experimental support and suggestions based on human operation and subjective NASA-TLX workload evaluation for the application of touch screens in civil aircraft cockpits. [ABSTRACT FROM AUTHOR]

With the increasing uncertainty of urban security, urban resilience construction with risk awareness and bottom-line thinking has become essential for promoting sustainable urban development. This paper measures China's urban resilience development index (CRDI) based on 284 cities in China (except Tibet) using the entropy method from four dimensions: economic, social, environmental, and infrastructure, and analyzes it by combining coupling coordination degree and barrier factor analysis. We find that: (1) At the national level, CRDI and its sub-dimensions show an increasing trend in time, a decreasing spatial layout from coastal to inland, and a "high-high-low-low" clustering feature in space. (2) At the regional level, the CRDI is from high to low in the east, middle, and west order. The sub-dimensions are from high to low in the order of east, middle, and west for economic, social, and infrastructure resilience and from high to low in the order of east, west, and middle for environmental resilience. (3) To coupling coordination degree, the CRDI index coupling coordination is increasing in time trend but is still on the verge of dissonance. (4) Social resilience is the main obstacle factor. In the indicator layer, human resources, innovation, education, security, living, and environmental protection are the areas where CRDI coordinated development is the key to improvement. Based on the above empirical evidence, this paper proposes countermeasures to optimize urban resilience construction from four perspectives: economic, social, environmental, and infrastructure. [ABSTRACT FROM AUTHOR]

In order to solve the surface detection problems of low accuracy, low precision and inability to automate in the production process of late-model display panels, a little sample-based deep learning organic light-emitting diodes detection model SmartMuraDetection is proposed. First, aiming at the detection difficulty of low surface defect contrast, a gradient boundary enhancement algorithm module is designed to automatically identify and enhance defects and background gray difference. Then, the problem of insufficient little sample data sets is solved, Poisson fusion image enhancement module is designed for sample enhancement. Then, a TinyDetection model adapted to small-scale target detection is constructed to improve the detection accuracy of defects in small-scale targets. Finally, SEMUMaxMin quantization module is proposed as a post-processing module for the result images derived from network model reasoning, and accurate defect data is obtained by setting a threshold filter. The number of sample images in the experiment is 334. This study utilizes an organic light-emitting diodes detection model. The detection accuracy of surface defects can be improved by 85% compared with the traditional algorithm. The method in this paper is used for mass production evaluation in the actual display panel production site. The detection accuracy of surface defects reaches 96%, which can meet the mass production level of the detection equipment in this process section. [ABSTRACT FROM AUTHOR]

Objective: To end the AIDS epidemic by 2030, despite the increasing poverty and inequalities, policies should be designed to deal with population heterogeneity and environmental changes. Bottom-up designs, such as the Agent-Based Model (ABM), can model these features, dealing with such complexity. HIV/AIDS has a complex dynamic of structural factors, risk behaviors, biomedical characteristics and interventions. All embedded in unequal, stigmatized and heterogeneous social structure. To understand how ABMs can model this complexity, we performed a scoping review of HIV applications, highlighting their potentialities. Methods: We searched on PubMed, Web of Science, and Scopus repositories following the PRISMA extension for scoping reviews. Our inclusion criteria were HIV/AIDS studies with an ABM application. We identified the main articles using a local co-citation analysis and categorized the overall literature aims, (sub)populations, regions, and if the papers declared the use of ODD protocol and limitations. Results: We found 154 articles. We identified eleven main papers, and discussed them using the overall category results. Most studies model Transmission Dynamics (37/154), about Men who have sex with Men (MSM) (41/154), or individuals living in the US or South Africa (84/154). Recent studies applied ABM to model PrEP interventions (17/154) and Racial Disparities (12/154). Only six papers declared the use of ODD Protocol (6/154), and 34/154 didn't mention the study limitations. Conclusions: While ABM is among the most sophisticated techniques available to model HIV/AIDS complexity. Their applications are still restricted to some realities. However, researchers are challenged to think about social structure due model characteristics, the inclusion of these features is still restricted to case-specific. Data and computational power availability can enhance this feature providing insightful results. [ABSTRACT FROM AUTHOR]

Frequent occlusion of tracking targets leads to poor performance of tracking algorithms. A common practice in multi-target tracking algorithms is to re-identify the occluded tracking targets, which increases the number of identity switching occurrences. This paper focuses on online multi-object tracking and designs an anti-occlusion, robust association strategy, and feature extraction model. Specifically, the least squares algorithm and the Kalman filter are used to predict the trajectory of the tracking target, while the two-way self-attention mechanism is employed to extract the features of the tracking target, as well as positive and negative samples. After the tracking target is occluded, the association strategy is used to assign the identity information from before the occlusion. The experimental results demonstrate that the algorithm proposed in this paper has achieved excellent tracking performance on the MOT dataset. [ABSTRACT FROM AUTHOR]

In order to improve the decorative properties of Magnesium-Glass-Board (MGB), the surface morphology and decoration performance of MGB, are studied in detail by using profilometer, microscope and SEM, and the influence of its characterization, such as surface roughness, surface porosity and wettability, on decorative properties of MGB is analyzed by comparing with medium density fiberboard (MDF) and medium density particleboard (MDP). The results first showed that the surface of MGB has a porous structure, but MDF and MDP are not, resulting in a poor decorative performance of MGB. Second, it is found that the surface wettability of MGB is better than others. Third, the hot-pressing parameters including pressure, temperature and time have different influence on decorative performance of MGB during hot-pressing experiment. Finally, the surface bonding strength is positively correlated with pressure, but not with temperature and time. In general, a higher surface bonding strength led to a better decorative performance of MGB. The furthermore research can concentrate on the modification method of the MGB's surface according to this paper's conclusion to improve the lamination performance of melamine paper. [ABSTRACT FROM AUTHOR]

Composite materials are popular because of their high performance capabilities, but new material development is time-consuming. To accelerate this process, researchers studying material informatics, an academic discipline combining computational science and material science, have developed less time-consuming approaches for predicting possible material combinations. However, these processes remain problematic because some materials are not suited for them. The limitations of specific candidates for new composites may cause potential new material pairs to be overlooked. To solve this problem, we developed a new method to predict possible composite material pairs by considering more materials than previous techniques. We predicted possible material pairs by conducting link predictions of material word co-occurrence networks while assuming that co-occurring material word pairs in scientific papers on composites were reported as composite materials. As a result, we succeeded in predicting the co-occurrence of material words with high specificity. Nodes tended to link to many other words, generating new links in the created co-occurrence material word network; notably, the number of material words co-occurring with graphene increased rapidly. This phenomenon confirmed that graphene is an attractive composite component. We expect our method to contribute to the accelerated development of new composite materials. [ABSTRACT FROM AUTHOR]

Economic policy uncertainty has had an important impact on trade and sustainable economic development. Especially in some specific industries, uncertainty has increased dramatically. The extant related literature mainly analyzes the nexus between uncertainty and trade across different industries and focuses less on a specific industry. Using Chinese customs data on HS 8-digit products over the period of 2000–2013, this paper first investigates the impact of both foreign economic policy uncertainty (EPU) and domestic intra-industry trade on China's mechanical and electrical product exports to 23 trading partners and applies pooled OLS regressions to conduct an empirical study. This paper finds that EPU has a significant inhibition effect on mechanical and electrical product exports; conversely, intra-industry trade can both significantly promote exports and alleviate the inhibition effect of EPU. In addition, the export impact of EPU varied with different trade patterns. It can significantly inhibit processing exports, while it has no effect on ordinary exports. The results of this paper indicate that in the context of increasing uncertainty, our findings could have far-reaching policy implications for China to build a new development pattern of domestic and international dual circulation. [ABSTRACT FROM AUTHOR]

A brain tumor magnetic resonance image processing algorithm can help doctors to diagnose and treat the patient's condition, which has important application significance in clinical medicine. This paper proposes a network model based on the combination of U-net and DenseNet to solve the problems of class imbalance in multi-modal brain tumor image segmentation and the loss of effective information features caused by the integration of features in the traditional U-net network. The standard convolution blocks of the coding path and decoding path on the original network are improved to dense blocks, which enhances the transmission of features. The mixed loss function composed of the Binary Cross Entropy Loss function and the Tversky coefficient is used to replace the original single cross-entropy loss, which restrains the influence of irrelevant features on segmentation accuracy. Compared with U-Net, U-Net++, and PA-Net the algorithm in this paper has significantly improved the segmentation accuracy, reaching 0.846, 0.861, and 0.782 respectively in the Dice coefficient index of WT, TC, and ET. The PPV coefficient index has reached 0.849, 0.883, and 0.786 respectively. Compared with the traditional U-net network, the Dice coefficient index of the proposed algorithm exceeds 0.8%, 4.0%, and 1.4%, respectively, and the PPV coefficient index in the tumor core area and tumor enhancement area increases by 3% and 1.2% respectively. The proposed algorithm has the best performance in tumor core area segmentation, and its Sensitivity index has reached 0.924, which has good research significance and application value. [ABSTRACT FROM AUTHOR]

The rapid growth of on-demand ride service platforms has made it increasingly important for these platforms to efficiently match services by understanding driver characteristics and consumer preferences. This paper aims to investigate the pricing strategy by considering the impact of consumer preference heterogeneity and the different service types offered by drivers. The findings of this study reveal the need for the platform to strike a balance between service cost and the benefits of high-quality drivers, which can be referred to as the "cost-performance ratio". If the "cost-performance ratio" that attracts high-quality drivers is high, the platform will attract high-quality drivers or drivers of all types to participate while offering differentiated services. Otherwise, the platform will only provide services through low-quality drivers. Furthermore, the platform will also consider when to offer differentiated services based on network externalities and service quality. When the network externalities of the two types of services are similar, the platform will differentiate them based on service quality differences. Overall, considering consumer preference heterogeneity, drivers of service types, and network externalities, this paper provides guidance for platforms to make optimal decisions that enhance their service offerings and improve overall customer satisfaction. [ABSTRACT FROM AUTHOR]

In order to enhance market share and competitiveness, large banks are increasingly focusing on promoting marketing strategies. However, the traditional bank marketing strategy often leads to the homogenization of customer demand, making it challenging to distinguish among various products. To address this issue, this paper presents a customer demand learning model based on financial datasets and optimizes the distribution model of bank big data channels through induction to rectify the imbalance in bank customer transaction data. By comparing the prediction models of random forest model and support vector machine (SVM), this paper analyzes the ability of the prediction model based on ensemble learning to significantly enhance the market segmentation of e-commerce banks. The empirical results reveal that the accuracy of random forest model reaches 92%, while the accuracy of SVM model reaches 87%. This indicates that the ensemble learning model has higher accuracy and forecasting ability than the single model. It enables the bank marketing system to implement targeted marketing, effectively maintain the relationship between customers and banks, and significantly improve the success probability of product marketing. Meanwhile, the marketing model based on ensemble learning has achieved a sales growth rate of 20% and improved customer satisfaction by 30%. This demonstrates that the implementation of the ensemble learning model has also significantly elevated the overall marketing level of bank e-commerce services. Therefore, this paper offers valuable academic guidance for bank marketing decision-making and holds important academic and practical significance in predicting bank customer demand and optimizing product marketing strategy. [ABSTRACT FROM AUTHOR]

Purpose: Metastatic breast cancer [MBC] is the leading cause of cancer death in women globally with no cure. Women diagnosed with MBC endure a catastrophic upheaval to multiple aspects of their life and a radically transformed future landscape. Evidence suggests that the provision of care for women living with metastatic breast cancer is inadequate, socially isolating and stigmatising. To date, this topic has received little research attention. To increase understanding of the experiences of women living with MBC, a synthesis of current evidence is required. This paper presents a review of qualitative evidence on women's experiences of MBC. Methods: A qualitative evidence synthesis [QES] was conducted to synthesise primary qualitative research on the experiences of women living with MBC. Searches were performed of electronic databases Medline, Medline Ovid, PsycINFO, Psych articles, PubMED, CINAHL Complete, Scopus and grey literature databases. The methodological quality of the included studies was appraised using a modified version of the Critical Appraisal Skills Programme [CASP]. Title, abstract, and full-text screening were undertaken. A 'best fit' framework approach using the ARC [Adversity, Restoration, Compatibility] framework was used to guide data extraction and synthesis. Confidence in the findings was assessed using the Grading of Recommendations Assessment, Development and Evaluation, Confidence in the Evidence from Reviews of Qualitative research [GRADE-CERQual]. Results: 28 papers from 21 research studies containing 478 women's experiences of living with MBC were deemed suitable for inclusion in this qualitative evidence synthesis. Findings are presented in a new conceptual framework RAAW [adapted from ARC] for women living with MBC under themes: Reality, Adversity, Adjustment and Wellbeing. Findings revealed that a diagnosis of MBC impacted every aspect of women's lives; this is different to a diagnosis of early breast cancer. An overarching theme of lack of support extended across various facets of their lives. A lack of psychological, emotional, and psychosocial support was evident, with a critical finding that models of care were not fit for purpose. Deficits included a lack of information, knowledge, inclusion in shared decision-making and MDT support, specifically the need for palliative care/oncology support access. Some women living with MBC wanted to be identified as having a chronic illness not a life-limiting illness. Culture and socioeconomic standing influenced the availability of various types of support. The impact of treatment and symptoms had an adverse effect on women's quality of life and affected their ability to adjust. Conclusion: This review synthesised the qualitative literature on the experiences of women living with MBC. The ARC framework used in the synthesis was adapted to develop a revised conceptual framework titled RAAW to represent the evidence from this review on experiences for women living with MBC; Reality & Adversity: A diagnosis of MBC; Adjustment: Living with MBC; Wellbeing: Awareness, meaning, engagement [RAAW; MBC]. [ABSTRACT FROM AUTHOR]

This paper aims to study the relationship between regional logistics efficiency and economic development in 31 provinces of China and analyze their coupling coordination. To comprehensively evaluate the coordination between logistics and the economy, we introduced external indicators, such as carbon emissions, based on traditional evaluation indicators. We constructed an evaluation index system to coordinate regional logistics efficiency and economic development. The research approach used in this paper is the cross-DEA method, and data from 2010 to 2019 were selected for empirical calculation. The research findings indicate that Eastern and Northern regions of China show higher logistics efficiency, while Northwestern and Southwestern regions exhibit lower logistics efficiency. Coastal areas have relatively higher economic development levels compared to inland areas. Regarding the coupling coordination between logistics efficiency and economic development, different regions show temporal fluctuations and spatial disparities. Some regions demonstrate higher coordination between logistics efficiency and economic development, while others show lower coordination. Additionally, as the economy experiences rapid growth, logistics efficiency also improves, but the level of coordination varies among different provinces. [ABSTRACT FROM AUTHOR]

Charging infrastructure deployment has taken off in many cities with the rise of the number of electric vehicles on the road. Expansion of infrastructure is a matter of prioritisation of resources to optimise the infrastructure. This paper explores how to measure charging station performance, to address the challenges that policy makers face. These performance indicators are used in a regression model, based upon current utilisation of the network, to predict which charging stations perform best. The results show that a model based on available geographical data and performance metrics of the current network are best combined to predict infrastructure performance. The variability between public charging stations is however big, as frequent user characteristics do determine the performance to a large extent. [ABSTRACT FROM AUTHOR]

Circular reinforced concrete wound glass fiber reinforced polymer (GFRP) columns and reinforced concrete filled GFRP columns are extensively utilized in civil engineering practice. Various factors influence the performance of these two types of GFRP columns, thereby impacting the whole project. Therefore, it is highly significant to establish the prediction models for ultimate displacement and ultimate bearing capacity to optimize the design of the two types of GFRP columns. In this study, based on the experiments conducted under different conditions on the two kinds of GFRP columns, automatic machine learning along with four other commonly used machine learning methods were employed for modeling to analyze how the column parameters (cross section shape, concrete strength, height of GFRP column, wound GFRP wall thickness, inner diameter of wound GFRP column) affect their performance. The differences in performance among these five machine learning methods were analyzed after modeling. Subsequently, we obtained the variation patterns in ultimate displacement and ultimate bearing capacity of the columns influenced by each parameter by testing the data using the optimal model. Based on these findings, the optimal design schemes for the two types of GFRP columns are proposed. The contribution of this paper is three-fold. First, AutoML sheds light on the automatic prediction of ultimate displacement and ultimate bearing capacity of GFRP column. Second, in this paper, two optimal design schemes of GFRP columns are proposed. Third, for AEC industrial practitioners, the whole process is automatic, accurate and less reliant on data expertise and the optimization design scheme proposed in the article is relatively scientific. [ABSTRACT FROM AUTHOR]

This paper investigates the impact mechanism by which an incentive-based fertility policy may reduce the labor income share. First, the specific paths through which this impact mechanism is realized are analyzed using the production function. It is found that an incentive-based fertility policy triggers high savings, which implies more, cheaper, and more readily available capital to be invested in production. A distribution system that earns income based on factor contributions results in more gains for capital than labor, i.e., a lower share of labor income and a wider income gap between labor and capital. Second, the impact mechanism includes three theoretical hypotheses. They are that an encouraging fertility policy is negatively related to labor income share; this relationship is valid provided that the study subject is in a closed economy; and that capital intensification is a mediator variable of fertility policy affecting labor income share. Finally, to further corroborate the impact mechanism in this paper, a Hansen threshold panel model is applied to verify that the effect of fertility policy on labor income share has a threshold effect. This indicates that the effect of the former on the latter changes significantly before and after the change in fertility policy, confirming the existence of an impact mechanism. The established literature has paid little attention to the impact of incentivised fertility policies on the labour income gap. Using capital intensification as the mediating variable, this paper demonstrates the existence of the former effect on the latter. In view of this, under the encouraged fertility policy, this paper proposes specific measures to enhance the labor income share in order to narrow the income gap between labor and capital. [ABSTRACT FROM AUTHOR]