Search

How do author perceptions match up to the outcomes of the peer-review process and perceptions of others? In a top-tier computer science conference (NeurIPS 2021) with more than 23,000 submitting authors and 9,000 submitted papers, we surveyed the authors on three questions: (i) their predicted probability of acceptance for each of their papers, (ii) their perceived ranking of their own papers based on scientific contribution, and (iii) the change in their perception about their own papers after seeing the reviews. The salient results are: (1) Authors had roughly a three-fold overestimate of the acceptance probability of their papers: The median prediction was 70% for an approximately 25% acceptance rate. (2) Female authors exhibited a marginally higher (statistically significant) miscalibration than male authors; predictions of authors invited to serve as meta-reviewers or reviewers were similarly calibrated, but better than authors who were not invited to review. (3) Authors' relative ranking of scientific contribution of two submissions they made generally agreed with their predicted acceptance probabilities (93% agreement), but there was a notable 7% responses where authors predicted a worse outcome for their better paper. (4) The author-provided rankings disagreed with the peer-review decisions about a third of the time; when co-authors ranked their jointly authored papers, co-authors disagreed at a similar rate-about a third of the time. (5) At least 30% of respondents of both accepted and rejected papers said that their perception of their own paper improved after the review process. The stakeholders in peer review should take these findings into account in setting their expectations from peer review.

Paper mulberry pollen, declared a pest in several countries including Pakistan, can trigger severe allergies and cause asthma attacks. We aimed to develop an algorithm that could accurately predict high pollen days to underpin an alert system that would allow patients to take timely precautionary measures. We developed and validated two prediction models that take historical pollen and weather data as their input to predict the start date and peak date of the pollen season in Islamabad, the capital city of Pakistan. The first model is based on linear regression and the second one is based on phenological modelling. We tested our models on an original and comprehensive dataset from Islamabad. The mean absolute errors (MAEs) for the start day are 2.3 and 3.7 days for the linear and phenological models, respectively, while for the peak day, the MAEs are 3.3 and 4.0 days, respectively. These encouraging results could be used in a website or app to notify patients and healthcare providers to start preparing for the paper mulberry pollen season. Timely action could reduce the burden of symptoms, mitigate the risk of acute attacks and potentially prevent deaths due to acute pollen-induced allergy.

Threatened shark species are caught in large numbers by artisanal and commercial fisheries and traded globally. Monitoring both which shark species are caught and sold in fisheries, and the export of CITES-restricted products, are essential in reducing illegal fishing. Current methods for species identification rely on visual examination by experts or DNA barcoding techniques requiring specialist laboratory facilities and trained personnel. The need for specialist equipment and/or input from experts means many markets are currently not monitored. We have developed a paper-based Lab-on-a-Chip (LOC) to facilitate identification of three threatened and CITES-listed sharks, bigeye thresher (Alopias superciliosus), pelagic thresher (A. pelagicus) and shortfin mako shark (Isurus oxyrinchus) at market source. DNA was successfully extracted from shark meat and fin samples and combined with DNA amplification and visualisation using Loop Mediated Isothermal Amplification (LAMP) on the LOC. This resulted in the successful identification of the target species of sharks in under an hour, with a working positive and negative control. The LOC provided a simple "yes" or "no" result via a colour change from pink to yellow when one of the target species was present. The LOC serves as proof-of-concept (PoC) for field-based species identification as it does not require specialist facilities. It can be used by non-scientifically trained personnel, especially in areas where there are suspected high frequencies of mislabelling or for the identification of dried shark fins in seizures.

Anti-neutrophil cytoplasmic antibody (ANCA) associated vasculitis (AAV) is a chronic, relapsing-remitting condition associated with increased morbidity. Previous research has shown patients with AAV report high levels of fatigue, pain, depression and anxiety. Over recent years successful work has been carried out to improve clinical outcomes, resulting in reduced mortality and end stage kidney disease (ESKD). Despite this, little work has been done to better understand the role of the patient within this condition. The prevalence of AAV is increasing and to date, there is a shortage of specific tools that assess and measure key features relating to patient reported outcomes (PROs). This protocol details how we can better understand the lived experiences of those with AAV through the development of a disease specific, patient reported outcome measure (PROM), to be used in clinic practice. This will allow us to recognise and validate PROs and the impact the disease and its treatment has on patients' health related quality of life (HRQoL). In addition, we aim to identify potential differences in PRO's between demographics, organ involvement and treatment subgroups in AAV as well as outcomes relating to the patient experience. Patients from a single centre in the UK will be recruited to take part in the exploratory qualitative study which will include focus groups and semi-structured interviews. The inclusion criteria comprise anyone with a diagnosis of AAV and willing to participate, including those who have active or relapsing disease, those are economically active, unemployed, retired and patients receiving renal replacement therapy. The aim of the project is to identify key issues patients experience in relation to their disease and its management and how these can be better assessed in a new PROM developed for use in the clinic setting. This will enable better delivery of individualised care and inform shared decision making, while also serving as a platform for future research looking at PROs in other glomerulonephritides.

ContextThe retraction of research papers, for whatever reason, is a growing phenomenon. However, although retracted paper information is publicly available via publishers, it is somewhat distributed and inconsistent.ObjectiveThe aim is to assess: (i) the extent and nature of retracted research in Computer Science (CS) (ii) the post-retraction citation behaviour of retracted works and (iii) the potential impact upon systematic reviews and mapping studies.MethodWe analyse the Retraction Watch database and take citation information from the Web of Science and Google scholar.ResultsWe find that of the 33,955 entries in the Retraction watch database (16 May 2022), 2,816 are classified as CS, i.e., ≈ 8%. For CS, 56% of retracted papers provide little or no information as to the reasons. This contrasts with 26% for other disciplines. There is also some disparity between different publishers, a tendency for multiple versions of a retracted paper to be available beyond the Version of Record (VoR), and for new citations long after a paper is officially retracted (median = 3; maximum = 18). Systematic reviews are also impacted with ≈ 30% of the retracted papers having one or more citations from a review.ConclusionsUnfortunately, retraction seems to be a sufficiently common outcome for a scientific paper that we as a research community need to take it more seriously, e.g., standardising procedures and taxonomies across publishers and the provision of appropriate research tools. Finally, we recommend particular caution when undertaking secondary analyses and meta-analyses which are at risk of becoming contaminated by these problem primary studies.

Reading is considered a non-intuitive, cognitively demanding ability requiring synchronization between several neural networks supporting visual, language processing and higher-order abilities. With the involvement of technology in our everyday life, reading from a screen has become widely used. Several studies point to challenges in processing written materials from the screen due to changes in attention allocation when reading from a screen compared to reading from a printed paper. The current study examined the differences in brain activation when reading from a screen compared to reading from a printed paper focusing on spectral power related to attention in fifteen 6-8-year-old children. Using an electroencephalogram, children read two different age-appropriate texts, without illustrations, presented randomly on the screen and on a printed paper. Data were analyzed using spectral analyses in brain regions related to language, visual processing, and cognitive control, focusing on theta vs. beta waveforms. Results indicated that while reading from a printed paper was accompanied by higher energy in high-frequency bands (beta, gamma), reading from the screen was manifested by a higher power in the lower frequency bands (alpha, theta). Higher theta compared to the beta ratio, representing challenges in allocating attention to a given task, was found for the screen reading compared to the printed paper reading condition. Also, a significant negative correlation was found between differences in theta/beta ratio for screen vs paper reading and accuracy level in the age-normalized Sky-Search task measuring attention and a positive correlation with performance time. These results provide neurobiological support for the greater cognitive load and reduced focused attention during screen-based compared to print-based reading and suggest a different reliance on attention resources for the two conditions in children.

Women are under-represented among authors of scientific papers. Although the number of retractions has been rising over the past few decades, gender differences among authors of retracted papers remain poorly understood. Therefore, this study investigated gender differences in authorship of retracted papers in biomedical sciences available on RetractionWatch. Among 35,635 biomedical articles retracted between 1970 and 2022, including 20,849 first authors and 20,413 last authors, women accounted for 27.4% [26.8 to 28.0] of first authors and 23.5% [22.9 to 24.1] of last authors. The lowest representation of women was found for fraud (18.9% [17.1 to 20.9] for first authors and 13.5% [11.9 to 15.1] for last authors) and misconduct (19.5% [17.3 to 21.9] for first authors and 17.8% [15.7 to 20.3] for last authors). Women's representation was the highest for issues related to editors and publishers (35.1% [32.2 to 38.0] for first authors and 24.8% [22.9 to 26.8] for last authors) and errors (29.5% [28.0 to 31.0] for first authors and 22.1% [20.7 to 23.4] for last authors). Most retractions (60.9%) had men as first and last authors. Gender equality could improve research integrity in biomedical sciences.

In our study, we have empirically studied the assessment of cited papers within the framework of the anchoring-and-adjustment heuristic. We are interested in the question whether the assessment of a paper can be influenced by numerical information that act as an anchor (e.g. citation impact). We have undertaken a survey of corresponding authors with an available email address in the Web of Science database. The authors were asked to assess the quality of papers that they cited in previous papers. Some authors were assigned to three treatment groups that receive further information alongside the cited paper: citation impact information, information on the publishing journal (journal impact factor) or a numerical access code to enter the survey. The control group did not receive any further numerical information. We are interested in whether possible adjustments in the assessments can not only be produced by quality-related information (citation impact or journal impact), but also by numbers that are not related to quality, i.e. the access code. Our results show that the quality assessments of papers seem to depend on the citation impact information of single papers. The other information (anchors) such as an arbitrary number (an access code) and journal impact information did not play a (important) role in the assessments of papers. The results point to a possible anchoring bias caused by insufficient adjustment: it seems that the respondents assessed cited papers in another way when they observed paper impact values in the survey. We conclude that initiatives aiming at reducing the use of journal impact information in research evaluation either were already successful or overestimated the influence of this information.

Bisphenol A (BPA) is an industrial chemical that is widely used in various industrial applications. It has concerns in its use as a color developer in thermal paper receipts since it is identified as an endocrine disruptor and causes hormonal disturbances. In this study, thirty thermal paper receipt samples were randomly collected from various locations in Sharjah, United Arab Emirates and analyzed using high performance liquid chromatography-mass spectrometry. Sixty percent (60%) of receipt samples showed BPA levels above the acceptable limit (200 ng/mg) set by the European Union (EU) for thermal papers. On the other hand, 40% of the samples reported very low BPA levels (< 0.02 ng/mg). However, estimated weight adjusted daily intakes (EDI) ranged between 8.22 ×10-11 and 0.000812 μg/kg bw/day for the general population, and between 7.89×10-9 and 0.0681 μg/kg bw/day for the occupationally exposed cashiers. Thus, all calculated EDIs were below the European Food Safety Authority Tolerable Daily Intake (4 μg/kg·bw/day) and the provisional Health Canada Tolerable Daily Intake (25 ug/kg bw/day) under varying paper-to-skin transfer coefficients and absorption fractions. Nevertheless, due to its health effects and recent legal restrictions by EU, the occurrence of co-exposure to dietary and non-dietary sources should be considered in the health risk assessment of Bisphenol A, mainly for people with frequent occupational exposure to thermal paper, and especially with the increased use of sanitizers. The current study is a first within the UAE context in relation to BPA in thermal paper receipts, thus its significance especially with the recent EU enforcement of BPA limits in paper receipts. The study highlights that proper policies as well as education and awareness may assist in limiting transdermal BPA exposure for the general and occupationally exposed populations.

How the role of dopamine differs according to the evolution of eusociality and how it is required in the flexible society of Polistes paper wasps need further clarification. In the present study, we compared the storage and usage of dopamine-related substances in brains between the castes of paper wasps. The head widths, lipid stores in the abdomen, and levels of biogenic amines in the brains were measured in newly emerged females before male emergence (workers) and after male emergence (gynes) in four Polistes species. The head widths and the lipid stores were significantly larger in gynes than workers in P. snelleni, P. rothneyi, and P. jokahamae, whereas they did not differ between castes in P. chinensis. The levels of dopamine precursors in the brains were significantly higher in gynes than workers in P. snelleni, P. chinensis, and P. rothneyi, whereas those of dopamine and its metabolites did not differ between castes in these species. In P. jokahamae, the levels of dopamine precursors and dopamine in the brains did not differ between castes, but those of a dopamine metabolite were significantly higher in gynes than workers. Thus, the caste differences in the levels of dopamine-related substances did not always match body sizes and nutritional reserves. Foundresses in P. rothneyi had significantly lower levels of dopamine precursors and higher levels of dopamine and its metabolite than newly emerged gynes. These results suggested that in several Polistes species, dopamine precursors were stored in the brain without dopamine biosynthesis at emergence, and then converted into dopamine in foundresses during colony founding. These neuroendocrinal states in Polistes species largely differed from those in eusocial bees.

Invasive paper wasps such as Polistes dominula are a major pest and problem for biodiversity around the globe. Safe and highly targeted methods for the control of these and other social wasp populations are needed. We attempted to identify potentially-lethal gene targets that could be used on adult paper wasps in a gene silencing or RNA interference (RNAi) approach. Double-stranded RNA (dsRNA) was designed to target genes for which silencing has proven lethal in other insects. dsRNA was provided either orally to foragers or directly injected into the wasps. We also provided the dsRNA unprotected or protected from degradation by gut nucleases in two different forms (lipofectamine and carbon quantum dots). The effects of oral delivery of 22 different gene targets to forager wasps was evaluated. The expression of five different genes was successfully reduced following dsRNA ingestion or injection. These gene targets included the FACT complex subunit spt16 (DRE4) and RNA-binding protein fusilli (FUSILLI), both of which have been previously shown to have potential as lethal targets for pest control in other insects. However, we found no evidence of significant increases in adult wasp mortality following ingestion or injection of dsRNA for these genes when compared with control treatments in our experiments. The methods we used to protect the dsRNA from digestive degradation altered gene expression but similarly did not influence wasp mortality. Our results indicate that while many of the same gene targets can be silenced and induce mortality in other insects, dsRNA and RNAi approaches may not be useful for paper wasp control.

Postures at work are paramount in ergonomics. They can be determined using observation and inclinometry in a variety of measurement scenarios that may differ both in costs associated with collecting and processing data, and in efficiency, i.e. the precision of the eventual outcome. The trade-off between cost and efficiency has rarely been addressed in research despite the obvious interest of obtaining precise data at low costs. Median trunk and upper arm inclination were determined for full shifts in 28 paper mill workers using both observation and inclinometry. Costs were estimated using comprehensive cost equations; and efficiency, i.e. the inverted standard deviation of the group mean, was assessed on basis of exposure variance components. Cost and efficiency were estimated in simulations of six sampling scenarios: two for inclinometry (sampling from one or three shifts) and four for observation (one or three observers rating one or three shifts). Each of the six scenarios was evaluated for 1 through 50 workers. Cost-efficiency relationships between the scenarios were intricate. As an example, inclinometry was always more cost-efficient than observation for trunk inclination, except for observation strategies involving only few workers; while for arm inclination, observation by three observers of one shift per worker outperformed inclinometry on three shifts up to a budget of €20000, after which inclinometry prevailed. At a budget of €10000, the best sampling scenario for arm inclination was 2.5 times more efficient than the worst. Arm inclination could be determined with better cost-efficiency than trunk inclination. Our study illustrates that the cost-efficiency of different posture measurement strategies can be assessed and compared using easily accessible diagrams. While the numeric examples in our study are specific to the investigated occupation, exposure variables, and sampling logistics, we believe that inclinometry will, in general, outperform observation. In any specific case, we recommend a thorough analysis, using the comparison procedure proposed in the present study, of feasible strategies for obtaining data, in order to arrive at an informed decision support.

Nucleic acid amplification is a sensitive and powerful tool for allergen detection. However, it is limited due to the relatively cumbersome methods required to extract nucleic acids from single plant seed allergen (e.g. peanut and soybean). In view of this, an approach of extracting nucleic acid with untreated glass-fiber paper (paper-based microfluidics) was applied for nucleic acid capture and purification from plant seed allergen and commercial products. After cut by hollow cylindrical cutter, a certain size the paper chip it used to absorb DNA. And this paper-based microfluidics with DNA was directly applied for amplification by loop-mediated isothermal amplification (LAMP). To evaluate the adsorption performance of paper chip to DNA, CTAB and SDS method were used as comparisons. From amplification results, the established technique has good specificity, high repeatability (C.V. values are 4.41% and 6.17% for peanut and soybean) and favorable sensitivity (7.39 ng/μL or peanut and 6.6 ng/μL for soybean), and successfully used for commercial products (2 kinds of candy and 2 kinds of cakes containing peanut, and 2 kinds of drinks, candy and 2 kinds of biscuits containing soybean). This speed and flexible detection method makes it suit for applications in point-of-care (POC) detection at different scenario, such as custom house and import port.

Some macroalgae drift on the ocean and are stranded on coasts, and these stranded brown macroalgae are regarded to be degraded by organisms. Alginate is a major component of brown macroalgae. An uncovering of how carbon is cycled through brown macroalgae is needed to deeply understand coastal ecosystems. In this study, to gain insights into metabolism of brown macroalgae and alginate in the organisms, we initially confirmed that supralittoral talitrid amphipods (beach fleas or sandhoppers collected on the Shibagaki coast in Ishikawa Prefecture, Japan) fed on the brown macroalgae. We then isolated bacteria such as Vibrio sp. with alginate-assimilating capability from the gut of the amphipods. Metagenomic analysis of the gut of amphipods housed in several conditions (e.g. macroalgae or paper as feed, non-sterilized or sterilized environment) showed no condition-dependent compositions of bacteria and fungi, but Vibrio sp. were detected at high frequency, in good agreement with the isolation of Vibrio sp. An intervention study using antibiotics showed that amphipods fed on algae or paper at about the same rate in the presence or absence of antibiotics, and that the antibiotics had no effects on the life span. Moreover, intervention with antibiotics completely killed Vibrio sp. and some other bacteria, and had significant effects on the composition of the flora in the gut, with elimination of the variations observed in the guts of amphipods housed without antibiotics. These data suggest that microbes that were killed by antibiotics, including Vibrio sp., in the gut of talitrid amphipods are not essential for assimilation of brown macroalgae.

DNA extraction, a vital pre-requisite for most biological studies, continues to be studied extensively. According to some studies, DNA shows a certain degree of absorbability on filter paper made of plant fiber-based adsorbent material. However, the principle underlying such specific adsorption as well as plant species associated with plant fiber-based adsorbents and optimized extraction conditions have not yet been studied. This study demonstrates the tight correlation between crystallinity and hygroscopicity in plant fiber-based adsorbents used for DNA extraction and proposes the concept of DNA adsorption on plant fiber-based adsorbents, for the first time. We also explored optimal extracting and eluting conditions and developed a novel plant fiber-based DNA extraction method that was quadruple times more powerful than current approaches. Starting with the screening of various types of earthed plant fiber-based adsorbents, we went on to mine new plant fiber-based adsorbents, bamboo paper and degreased cotton, and succeeded in increasing their efficiency of DNA extraction to 4.2 times than that of current approaches. We found a very strong correlation between the crystallinity and hygroscopicity of plant fiber-based adsorbents which showed efficiency for DNA extraction, and thus propose a principle that potentially governs such specific adsorption processes, in the hope that this information may guide related multidisciplinary research studies in the future. Nanodrop, electrophoresis and PCR were selected to demonstrate the quantity, quality, integrity and utility of the extracted DNA. Furthermore, crystallinity, hygroscopicity, pore size distribution and composition of plant fiber-based adsorbents were studied to explore their correlation in an attempt to understand the principle underlying this particular type of adsorption. The findings of this study may be further extended to the extraction of other types of nucleic acids with similar biochemical properties.

We propose a stochastic generative model to represent a directed graph constructed by citations among academic papers, where nodes and directed edges represent papers with discrete publication time and citations respectively. The proposed model assumes that a citation between two papers occurs with a probability based on the type of the citing paper, the importance of cited paper, and the difference between their publication times, like the existing models. We consider the out-degrees of citing paper as its type, because, for example, survey paper cites many papers. We approximate the importance of a cited paper by its in-degrees. In our model, we adopt three functions: a logistic function for illustrating the numbers of papers published in discrete time, an inverse Gaussian probability distribution function to express the aging effect based on the difference between publication times, and an exponential distribution (or a generalized Pareto distribution) for describing the out-degree distribution. We consider that our model is a more reasonable and appropriate stochastic model than other existing models and can perform complete simulations without using original data. In this paper, we first use the Web of Science database and see the features used in our model. By using the proposed model, we can generate simulated graphs and demonstrate that they are similar to the original data concerning the in- and out-degree distributions, and node triangle participation. In addition, we analyze two other citation networks derived from physics papers in the arXiv database and verify the effectiveness of the model.

Although regression models play a central role in the analysis of medical research projects, there still exist many misconceptions on various aspects of modeling leading to faulty analyses. Indeed, the rapidly developing statistical methodology and its recent advances in regression modeling do not seem to be adequately reflected in many medical publications. This problem of knowledge transfer from statistical research to application was identified by some medical journals, which have published series of statistical tutorials and (shorter) papers mainly addressing medical researchers. The aim of this review was to assess the current level of knowledge with regard to regression modeling contained in such statistical papers. We searched for target series by a request to international statistical experts. We identified 23 series including 57 topic-relevant articles. Within each article, two independent raters analyzed the content by investigating 44 predefined aspects on regression modeling. We assessed to what extent the aspects were explained and if examples, software advices, and recommendations for or against specific methods were given. Most series (21/23) included at least one article on multivariable regression. Logistic regression was the most frequently described regression type (19/23), followed by linear regression (18/23), Cox regression and survival models (12/23) and Poisson regression (3/23). Most general aspects on regression modeling, e.g. model assumptions, reporting and interpretation of regression results, were covered. We did not find many misconceptions or misleading recommendations, but we identified relevant gaps, in particular with respect to addressing nonlinear effects of continuous predictors, model specification and variable selection. Specific recommendations on software were rarely given. Statistical guidance should be developed for nonlinear effects, model specification and variable selection to better support medical researchers who perform or interpret regression analyses.

As social issues like climate change become increasingly salient, digital traces left by scholarly documents can be used to assess their reach outside of academia. Our research examine who shared climate change research papers on Twitter by looking at the expressions used in profile descriptions. We categorized users in eight categories (academia, communication, political, professional, personal, organization, bots and publishers) associated to specific expressions. Results indicate how diverse publics may be represented in the communication of scholarly documents on Twitter. Supplementing our word detection analysis with qualitative assessments of the results, we highlight how the presence of unique or multiple categorizations in textual Twitter descriptions provides evidence of the publics of research in specific contexts. Our results show a more substantial communication by academics and organizations for papers published in 2016, whereas the general public comparatively participated more in 2015. Overall, there is significant participation of publics outside of academia in the communication of climate change research articles on Twitter, although the extent to which these publics participate varies between individual papers. This means that papers circulate in specific communities which need to be assessed to understand the reach of research on social media. Furthermore, the flexibility of our method provide means for research assessment that consider the contextuality and plurality of publics involved on Twitter.

IntroductionLiterature is lacking on the safety of storing contaminated PPE in paper bags for reuse, potentially increasing exposure to frontline healthcare workers (HCW) and patients. The aim of this study is to evaluate the effectiveness of paper bags as a barrier for fomite transmission of SARS-CoV-2 by storing face masks, respirators, and face shields.MethodsThis quasi-experimental study evaluated the presence of SARS-CoV-2 on the interior and exterior surfaces of paper bags containing PPE that had aerosolized exposures in clinical and simulated settings. Between May and October 2020, 30 unique PPE items were collected from COVID-19 units at two urban hospitals. Exposed PPE, worn by either an infected patient or HCW during a SARS-CoV-2 aerosolizing event, were placed into an unused paper bag. Samples were tested at 30-minute and 12-hour intervals.ResultsA total of 177 swabs were processed from 30 PPE samples. We found a 6.8% positivity rate among all samples across both collection sites. Highest positivity rates were associated with ventilator disconnection and exposure to respiratory droplets from coughing. Positivity rates differed between hospital units. Total positivity rates were similar between 30-minute (6.7%) and 12-hour (6.9%) sample testing time intervals. Control samples exposed to inactivated SARS-CoV-2 droplets had higher total viral counts than samples exposed to nebulized aerosols.ConclusionsData suggests paper bags are not a significant fomite risk for SARS-CoV-2 transmission. However, controls demonstrated a risk with droplet exposure. Data can inform guidelines for storing and re-using PPE in situations of limited supplies during future pandemics.

BackgroundPromoting physical activity (PA) for university students is essential as PA levels decrease during the transition from secondary to higher education. Providing technology-supported university courses targeting students' PA levels may be a viable option to combat the problem. However, it is still unclear how and what technologies should be implemented in university courses to promote PA. This study aims to create a series of design principles for technology-supported physical education courses that aim to increase university students' PA knowledge, motivation and levels.MethodThe proposed methodology underpinning the research program is a seven-phase design-based research (DBR) approach, with the seven phases encompassed in four sequential studies. These four studies are a systematic review, a qualitative focus group study, a pilot study, and a randomised controlled trial (RCT) study. The protocol paper aims to detail the plan for conducting the four studies in a comprehensive and transparent manner, thus contributing to the methodological evidence base in this field.DiscussionDesign principles generated from this project will contribute to the growing evidence focusing on effective design and implementation features. Future practitioners can also use these to develop physical education courses that aim to promote university students' physical activity levels, knowledge, and motivation.Trial registrationThe RCT registry number: ACTRN12622000712707, 18/05/2022.

Introduction More people are living with and beyond a cancer diagnosis. There is limited understanding of the long-term effects of cancer and cancer treatment on quality of life and personal and household finances when compared to people without cancer. In a separate protocol we have proposed to link de-identified data from electronic primary care and hospital records for a large population of cancer survivors and matched controls. In this current protocol, we propose the linkage of Patient Reported Outcomes Measures data to the above data for a subset of this population. The aim of this study is to investigate the full impact of living with and beyond a cancer diagnosis compared to age and gender matched controls. A secondary aim is to test the feasibility of the collection of Patient Reported Outcomes Measures (PROMS) data and the linkage procedures of the PROMs data to electronic health records data. Materials and methods This is a cross-sectional study, aiming to recruit participants treated at the Leeds Teaching Hospitals National Health Service Trust. Eligible patients will be cancer survivors at around 5 years post-diagnosis (breast, colorectal and ovarian cancer) and non-cancer patient matched controls attending dermatology out-patient clinics. They will be identified by running a query on the Leeds Teaching Hospitals Trust patient records system. Approximately 6000 patients (2000 cases and 4000 controls) will be invited to participate via post. Participants will be invited to complete PROMs assessing factors such as quality of life and finances, which can be completed on paper or online (surveys includes established instruments, and bespoke instruments (demographics, financial costs). This PROMs data will then be linked to routinely collected de-identified data from patient’s electronic primary care and hospital records. Discussion This innovative work aims to create a truly ‘comprehensive patient record’ to provide a broad picture of what happens to cancer patients across their cancer pathway, and the long-term impact of cancer treatment. Comparisons can be made between the cases and controls, to identify the aspects of life that has had the greatest impact following a cancer diagnosis. The feasibility of linking PROMs data to electronic health records can also be assessed. This work can inform future support offered to people living with and beyond a cancer diagnosis, clinical practice, and future research methodologies.

BackgroundAdvances in medicine and public health mean that people are living longer; however, a significant proportion of that increased lifespan is spent in a prolonged state of declining health and wellbeing which places increasing pressure on medical, health and social services. There is a social and economic need to develop strategies to prevent or delay age-related disease and maintain lifelong health. Several studies have suggested links between the gut microbiome and age-related disease, which if confirmed would present a modifiable target for intervention development. The MOTION study aims to determine whether and how changes in the gut microbiome are associated with physical and mental capacity. A comprehensive longitudinal multiparameter study such as this has not been previously undertaken.MethodsMOTION is a longitudinal prospective cohort study with a focus on gut health and cognitive function. 360 healthy individuals aged 60 years and older, living in East Anglia, UK will be recruited to the study, stratified into one of three risk groups (cohorts) for developing dementia based on their cognitive function. Participants will attend study appointments every six months over four years, providing stool and blood samples and a health questionnaire. Participants will also undergo physical measurements and cognitive tests at alternating appointments, and undergo Optical Coherence Tomography scans at 3 timepoints. Two subgroups of participants in the study will provide colonic tissue biopsies (n = ≥30 from each cohort), and brain imaging (n = 30) at two timepoints.DiscussionThis study will provide new insights into the gut-(microbiota)-brain axis and the relationship between age-associated changes in gut microbe populations and cognitive health. Such insights could help develop new microbe-based strategies to improve lifelong health and wellbeing.Trial registrationThis study is registered in the ClinicalTrials.gov Database with ID: NCT04199195 Registered: May 14, 2019.

The title of an article is the main entrance for reading the full article. The aim of our work therefore is to examine differences of title content and form between original research articles and its changes over time. Using PubMed we examined title properties of 500 randomly chosen original research articles published in the general major medical journals BMJ, JAMA, Lancet, NEJM and PLOS Medicine between 2011 and 2020. Articles were manually evaluated with two independent raters. To analyze differences between journals and changes over time, we performed random effect meta-analyses and logistic regression models. Mentioning of results, providing any quantitative or semi-quantitative information, using a declarative title, a dash or a question mark were rarely used in the title in all considered journals. The use of a subtitle, methods-related items, such as mentioning of methods, clinical context or treatment increased over time (all p < 0.05), while the use of phrasal tiles decreased over time (p = 0.044). Not a single NEJM title contained a study name, while the Lancet had the highest usage of it (45%). The use of study names increased over time (per year odds ratio: 1.13 (95% CI: [1.03‒1.24]), p = 0.008). Investigating title content and form was time-consuming because some criteria could only be adequately evaluated by hand. Title content changed over time and differed substantially between the five major medical journals. Authors are advised to carefully study titles of journal articles in their target journal prior to manuscript submission., Competing Interests: There are no patents, products in development or marketed products to declare. AZ is a licensed Tim Albert trainer. Tim Albert trainings deal with advising people how to write medical papers. AZ has held several courses in the past based on Albert’s concept. This does not alter our adherence to PLOS ONE policies on sharing data and material., (Copyright: © 2023 Heßler, Ziegler. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Aim: This systematic review aims to investigate, identify, and compare evidence related to the barriers, enablers, and strategies to embedding translational research within a public hospital system focussed on nursing and allied health disciplines., Methods: A systematic review looking at the international literature on the barriers, enablers and strategies in embedding translational research within a public health system addressing nursing and allied health professions. The study channelled the PRISMA reporting guidelines for systematic reviews and meta-analyses. Databases searched were Medline, Embase, Scopus and Pubmed from January 2011 to December 2021 (inclusive). A quality assessment was conducted of literature using the mixed methods appraisal tool 2011 version., Results: Thirteen papers met the inclusion criteria. The studies included were from Australia, Saudi Arabia, China, Denmark and Canada. Occupational therapy and physiotherapy were the only two allied health disciplines identified in the search process. The review found considerable inter-relationships between the enablers, barriers, and strategies to embedding research translation in a public hospital setting. Three over-arching themes 'leadership, organisational culture and capabilities' were developed to capture the complexity of factors in embedding translational research. Key subthemes identified were education, knowledge, management, time, workplace culture and resources. All thirteen articles identified that a multifactorial approach is required to embed a research culture and translate research findings into clinical practice., Conclusions: The themes of leadership, organisational culture and capabilities are inherently intertwined and therefore successful strategies require a whole of health approach with organisational leadership driving the strategy, as changing organisational culture takes time and considerable investment. We recommend that public health organisations, senior executives and policy makers consider the findings of this review to provide evidence to initiate organisational changes to support and help create a research environment to drive research translation within the public sector., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Smith, Johnson. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

This paper uses extensive database research, film viewing and literature review to show how the field of surgery was staged in the early days of film history. It can be shown that-although surgical medicine was a subject in transition, and many scientific breakthroughs (anesthesia und antisepsis) made surgery less painful and more complication-free-filmmakers still frequently resorted to horror memories of the past and created a questionable, or ambivalent image of the surgeon, sometimes as extreme as the "lunatic with a scalpel" stereotype, blurring the line between genius and madness. But there were also positive staging's: The surgical intervention was often captured on the screen as a last resort for clinically hopeless cases, with the surgeon often presented as a "deus ex machina", the savior out of nowhere. Other specialties, however, such as plastic surgery, were mostly positively dramatized, which reveals a stark contrast to research about the representation of the field in the sound film era. A view at the fields of neurosurgery and (selectively) opthalmo-surgery rounds out the panorama of forty-one surgical films. In summary, it is shown that the early surgical film depicts the specialty and the surgeon in a highly ambivalent way, from savior to monster thereby reflecting one of the most significant transitions in the history of surgery and showing us what image was presented to the public-and thus to potential patients-in the movie theaters., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2022 Dennis Henkel. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The main goal of this paper is to examine Nobel Prize data by studying the association among the laureate's country of birth or residence, discipline, time period in which the Nobel Prize was awarded, and gender of the recipient. Multiple correspondence analysis is used as a tool to examine the association between these four categorical variables by cross classifying them in the form of a four-way contingency table. The data that we examine comprise Nobel Prize recipients from 1901 to 2018 (inclusive) from eight-developed countries, with a total sample of 785 Nobel Prize recipients. The countries include Canada, France, Germany, Italy, Japan, Russia, the British Isles, and the USA and the disciplines in which the individuals were awarded the prizes include chemistry, physics, physiology or medicine, literature, economics, and peace., Competing Interests: The authors have declared that no competing interests exist.

The Internet of Things (IoT) is gradually changing the way teaching and learning take place in on-campus programs. In particular, face capture services improve student concentration to create an efficient classroom atmosphere by using face recognition algorithms that support end devices. However, reducing response latency and executing face analysis services effectively in real-time is still challenging. For this reason, this paper proposed a pedagogical model of face recognition for IoT devices based on edge computing (TFREC). Specifically, this research first proposed an IoT service-based face capture algorithm to optimize the accuracy of face recognition. In addition, the service deployment method based on edge computing is proposed in this paper to obtain the best deployment strategy and reduce the latency of the algorithm. Finally, the comparative experimental results demonstrate that TFREC has 98.3% accuracy in face recognition and 72 milliseconds in terms of service response time. This research is significant for advancing the optimization of teaching methods in school-based courses, meanwhile, providing beneficial insights for the application of face recognition and edge computing in the field of education.

Unfair competition on internet platforms (UCIP) has become a critical issue restricting the platform economy's healthy development. This paper applies evolutionary game theory to study how to utilize multiple subjects' synergy to supervise UCIP effectively. First, the "multi-agent co-governance" mode of UCIP is constructed based on the traditional "unitary supervision" mode. Second, the government and internet platform evolutionary game models are built under two supervision modes. Finally, MATLAB is used to simulate and analyze the evolutionary stage and parameter sensitivity. In addition, we match the model's evolutionary stage with China's supervisory process. The results show that (1) the Chinese government's supervision of UCIP is in the transitional stage from "campaign-style" to "normalization." (2) Moderate government supervision intensity is essential to guide the game system to evolve toward the ideal state. If the supervision intensity is too high, it will inhibit the enthusiasm for supervision. If the supervision intensity is too low, it cannot form an effective deterrent to the internet platforms. (3) When the participation of industry associations and platform users is low, it can only slow down the evolutionary speed of the game system's convergence to the unfavorable state. Nevertheless, it cannot reverse the evolutionary result. (4) Maintaining the participation level of industry associations and platform users above a specific threshold value while increasing punishment intensity will promote the transition of government supervision from the "campaign-style" to the "normalization" stage. This paper provides ideas and references for the Chinese government to design a supervision mechanism for UCIP.

In China, the number of senior citizens has grown, along with the burden of old age, and aging has hampered economic growth. The advent of the digital age has led to the emergence of the digital economy as a new engine for economic growth. This paper uses DEA-Malmquist index model to measure the total factor productivity growth rate of 31 provinces in China from 2011 to 2021, and uses the moderating effects model to empirically investigate the relationship between the digital economy, aging and total factor productivity, and to verify whether the development of the digital economy can mitigate the negative impact of aging on total factor productivity. The results show that aging inhibits total factor productivity growth, and the digital economy can promote total factor productivity growth. Digital economy can alleviate the negative impact of aging on total factor productivity growth, and has a moderating effect. Digital economy plays a moderating role by improving the level of human capital and facilitating technological progress. The regional heterogeneity analysis shows that the moderating effect of the digital economy exists in the eastern and western regions and the southern region, but not in the central region and the northern region. Furthermore, the digital economy has a moderating effect on both the high and low aging groups. The research in this paper not only helps to evaluate the productivity effects of the digital economy, but also has important implications for finding ways to mitigate the negative effects of aging.

This paper investigates the relationship between monetary policy and bank risk-taking by introducing a model wherein banks expend a level of costly monitoring effort to select low-risk projects, thereby reducing the risk associated with the loans they grant. The impact of monetary policy on bank risk-taking is examined through both theoretical models and empirical analysis. The paper compares theoretical models with different assumptions, revealing an unambiguous negative effect without the assumption of limited liability for banks, and an ambiguous effect with the assumption of limited liability for banks, influenced by the equity ratio. The empirical model employs unique quarterly data comprising balance sheet information for top-listed banks in the U.S. banking system from 2000 to 2017. The findings indicate that low-interest rates contribute to an increase in bank risk-taking. Moreover, this effect is more pronounced after the financial crisis and weaker before the crisis. Additionally, the impact is evident for undercapitalized banks and more substantial for those financed with a higher proportion of equity.

Brazil counts among the countries the hardest hit by the Covid-19 pandemic. A great deal has been said about the negative role played by President Bolsonaro's denialism, but relatively few studies have attempted to measure precisely what impact it actually had on the pandemic. Our paper conducts econometric estimates based on observational data at municipal level to quantitatively assess the 'Bolsonaro effect' over time from March 2020 to December 2022. To our knowledge, this paper presents the most comprehensive investigation of Bolsonaro's influence in the spread of the pandemic from two angles: considering Covid-19 mortality and two key transmission mitigation channels (social distancing and vaccination); and exploring the full pandemic cycle (2020-2022) and its dynamics over time. Controlling for a rich set of relevant variables, our results find a strong and persistent 'Bolsonaro effect' on the death rate: municipalities that were more pro-Bolsonaro recorded significantly more fatalities. Furthermore, evidence suggests that the president's attitude and decisions negatively influenced the population's behaviour. Firstly, pro-Bolsonaro municipalities presented a lower level of compliance with social distancing measures. Secondly, vaccination was relatively less widespread in places more in favour of the former president. Finally, our analysis points to longer-lasting and damaging repercussions. Regression results are consistent with the hypothesis that the 'Bolsonaro effect' impacted not only on Covid-19 vaccination, but has affected vaccination campaigns in general thereby jeopardizing the historical success of the National Immunization Program in Brazil.

Cryo-electron micrograph images have various characteristics such as varying sizes, shapes, and distribution densities of individual particles, severe background noise, high levels of impurities, irregular shapes, blurred edges, and similar color to the background. How to demonstrate good adaptability in the field of image vision by picking up single particles from multiple types of cryo-electron micrographs is currently a challenge in the field of cryo-electron micrographs. This paper combines the characteristics of the MixUp hybrid enhancement algorithm, enhances the image feature information in the pre-processing stage, builds a feature perception network based on the channel self-attention mechanism in the forward network of the Swin Transformer model network, achieving adaptive adjustment of self-attention mechanism between different single particles, increasing the network's tolerance to noise, Incorporating PReLU activation function to enhance information exchange between pixel blocks of different single particles, and combining the Cross-Entropy function with the softmax function to construct a classification network based on Swin Transformer suitable for cryo-electron micrograph single particle detection model (Swin-cryoEM), achieving mixed detection of multiple types of single particles. Swin-cryoEM algorithm can better solve the problem of good adaptability in picking single particles of many types of cryo-electron micrographs, improve the accuracy and generalization ability of the single particle picking method, and provide high-quality data support for the three-dimensional reconstruction of a single particle. In this paper, ablation experiments and comparison experiments were designed to evaluate and compare Swin-cryoEM algorithms in detail and comprehensively on multiple datasets. The Average Precision is an important evaluation index of the evaluation model, and the optimal Average Precision reached 95.5% in the training stage Swin-cryoEM, and the single particle picking performance was also superior in the prediction stage. This model inherits the advantages of the Swin Transformer detection model and is superior to mainstream models such as Faster R-CNN and YOLOv5 in terms of the single particle detection capability of cryo-electron micrographs.

During the COVID-19 pandemic, concerns were raised that face covering use may elicit risk compensation; a false sense of security resulting in reduced adherence to other protective behaviours such as physical distancing. This systematic review aimed to investigate the effect of face covering use on adherence to other COVID-19 related protective behaviours. Medline, Embase, PsychInfo, EmCare, medRxiv preprints, Research Square and WHO COVID-19 Research Database were searched for all primary research studies published from 1st January 2020 to 17th May 2022 that investigated the effect of face covering use on adherence to other protective behaviours in public settings during the COVID-19 pandemic. Papers were selected and screened in accordance with the PRISMA framework. Backwards and forwards citation searches of included papers were also conducted on 16th September 2022, with eligible papers published between 1st January 2020 and that date being included. A quality appraisal including risk of bias was assessed using the Academy of Nutrition and Dietetics' Quality Criteria Checklist. This review is registered on PROSPERO, number CRD42022331961. 47 papers were included, with quality ranging from low to high. These papers investigated the effects of face covering use and face covering policies on adherence to six categories of behaviour: physical distancing; mobility; face-touching; hand hygiene; close contacts; and generalised protective behaviour. Results reveal no consistent evidence for or against risk compensation, with findings varying according to behaviour and across study types, and therefore confident conclusions cannot be made. Any policy decisions related to face coverings must consider the inconsistencies and caveats in this evidence base.

The wing is one of the most important parts of a bird's locomotor system and is the inspiration origination for bionic wing design. During wing motions, the wing shape is closely related to the rotation angles of wing bones. Therefore, the research on the law of bone movement in the process of wing movement can be good guidance for the design of the bionic morphing wing. In this paper, the skeletal posture of the peregrine falcon wing during the extension/flexion is studied to obtain critical data on skeletal posture. Since an elbow joint and a wrist joint rotate correlatively to drive a wing to flex/extend, the wing skeleton is simplified as a four-bar mechanism in this paper. The degree of reproduction of wing skeleton postures was quantitatively analyzed using the four-bar mechanism model, and the bionic wing skeleton was designed. It is found that the wing motions have been reproduced with high precision.

In implementing the equity incentive system, this paper delves into the listed enterprises' selection of equity incentive models. While previous research has extensively covered the effects, models, and influencing factors of equity incentives, there needs to be more in-depth literature focusing on the diverse incentive models and their impact on corporate performance. Notably, there needs to be more literature on considering entrepreneurial spirit as a mechanism. It aims to explore the relationship between executives' choices under different incentive models, the entrepreneurial spirit fostered by these models, and their combined impact on corporate performance. The findings reveal that adopting the restricted stock incentive model by listed enterprises implementing the equity incentive system significantly positively affects enterprise performance. Mechanistic tests show that when a company implements the restricted stock incentive model, executives prioritize maximizing their interests, leading them to embrace more risk in their investment decisions. This behavior, in turn, stimulates the adventurous spirit of executives, positively impacting enterprise performance, particularly pronounced in companies with more concentrated executive power. Moreover, executives may be more inclined to invest in high-risk, high-reward innovative projects, a behavior indicative of innovation and more prevalent in firms with higher research and development (R&D) investment. However, the limitation of this paper is that the study evaluates the operation of the equity incentive system in China by taking listed companies in China as an example, which is not necessarily suitable for foreign developed capitalist countries. This study contributes to the study of principal-agent problems by exploring the relationship between executives, entrepreneurship and firm performance.

Three evident and meaningful characteristics of disruptive technology are the zeroing effect that causes sustaining technology useless for its remarkable and unprecedented progress, reshaping the landscape of technology and economy, and leading the future mainstream of technology system, all of which have profound impacts and positive influences. The identification of disruptive technology is a universally difficult task. Therefore, this paper aims to enhance the technical relevance of potential disruptive technology identification results and improve the granularity and effectiveness of potential disruptive technology identification topics. According to the life cycle theory, dividing the time stage, then constructing and analyzing the dynamic of technology networks to identify potential disruptive technology. Thereby, using the Latent Dirichlet Allocation (LDA) topic model further to clarify the topic content of potential disruptive technologies. This paper takes the large civil unmanned aerial vehicles (UAVs) as an example to prove the feasibility and effectiveness of the model. The results show that the potential disruptive technology in this field is the data acquisition, main equipment, and ground platform intelligence.

Neighborhood effects are a common strategy for rural households to deal with irrational situations such as deficient information and ability. Based on the 2019 CHFS survey data, we designed a Probit model to verify whether neighborhood effects exist in the online financial investment of rural households. Our paper constructs a multiple mediation model to explore its mechanism. Otherwise, we execute the heterogeneity analysis by dividing the total sample into groups. Our paper proved that (1) Rural households have significant neighborhood effects on online financial investment. (2) Heterogeneity analysis shows that neighborhood effects are stronger among women, the younger, low-education, and low-income rural households. (3) Through the multiple mediation model, we proved that the neighborhood effects on online financial investment of the peasant household work by the financial knowledge spillover and risk-taking enhancement. Our study conduces to a better understanding of the financial decision-making of rural households, which may provide a practical implication for the popularization of new financial products and the optimal design of policy interventions.

This paper investigates the long-run and short-run relationship between money supply and inflation in Pakistan, utilizing annual data spanning from 1981 to 2021. The key objective is to assess the impact of monetary policy, specifically money supply, on inflation dynamics in the country. To achieve this, the Autoregressive Distributed Lag (ARDL) bounds testing approach is employed, which is suitable for analyzing cointegration among variables with mixed integration orders. The results reveal both short and long-run cointegration between inflation, money supply, unemployment, and interest rates. Notably, unemployment demonstrates a negative correlation with inflation, while money supply and interest rates exhibit a positive relationship. These findings underscore the importance of dedicated policy measures to manage inflation effectively. The paper concludes by recommending the establishment of a policy implementation body and collaboration between the government and the central bank to ensure financial stability and control inflation through well-calibrated monetary and fiscal policies.

This paper introduces network science to museum studies. The spatial structure of the museum and the exhibit display largely determine what visitors see and in which order, thereby shaping their visit experience. Despite the importance of spatial properties in museum studies, few scientific tools have been developed to analyze and compare the results across museums. This paper introduces the six habitually used network science indices and assesses their applicability to museum studies. Network science is an empirical research field that focuses on analyzing the relationships between components in an attempt to understand how individual behaviors can be converted into collective behaviors. By taking the museum and the visitors as the network, this methodology could reveal unknown aspects of museum functions and visitor behavior, which could enhance exhibition knowledge and lead to better methods for creating museum narratives along the routes.

This paper presents a novel sound event detection (SED) system for rare events occurring in an open environment. Wavelet multiresolution analysis (MRA) is used to decompose the input audio clip of 30 seconds into five levels. Wavelet denoising is then applied on the third and fifth levels of MRA to filter out the background. Significant transitions, which may represent the onset of a rare event, are then estimated in these two levels by combining the peak-finding algorithm with the K-medoids clustering algorithm. The small portions of one-second duration, called 'chunks' are cropped from the input audio signal corresponding to the estimated locations of the significant transitions. Features from these chunks are extracted by the wavelet scattering network (WSN) and are given as input to a support vector machine (SVM) classifier, which classifies them. The proposed SED framework produces an error rate comparable to the SED systems based on convolutional neural network (CNN) architecture. Also, the proposed algorithm is computationally efficient and lightweight as compared to deep learning models, as it has no learnable parameter. It requires only a single epoch of training, which is 5, 10, 200, and 600 times lesser than the models based on CNNs and deep neural networks (DNNs), CNN with long short-term memory (LSTM) network, convolutional recurrent neural network (CRNN), and CNN respectively. The proposed model neither requires concatenation with previous frames for anomaly detection nor any additional training data creation needed for other comparative deep learning models. It needs to check almost 360 times fewer chunks for the presence of rare events than the other baseline systems used for comparison in this paper. All these characteristics make the proposed system suitable for real-time applications on resource-limited devices.

In the era of rapid product iteration, companies need simple and effective methods to guide the entire process of product innovation design and enhance their product innovation capabilities. Most research focused on improving one or several steps in the product design process. Although some scholars have proposed methods that guided the entire process, they combined more than three different theories, which increased the difficulty of theoretical learning and the complexity of practical implementation. This paper proposed a product innovation design process composed of three theoretical methods: Kano, Axiomatic Design (AD), and Theory of the Solution of Inventive Problems (TRIZ). This new process guided the entire product design process with fewer theoretical methods, reducing the difficulty of learning and implementation. The paper demonstrated the effectiveness of this method through the design practice of a portable two-wheeled self-balancing vehicle. Additionally, the discussion section explored the method's potential from the design management perspective.

This paper presents a custom made small rover based surveying, mapping and building information modeling solution. Majority of the commercially available mobile surveying systems are larger in size which restricts their maneuverability in the targeted indoor vicinities. Furthermore their functional cost is unaffordable for low budget projects belonging to developing markets. Keeping in view these challenges, an economical indigenous rover based scanning and mapping system has developed using orthogonal integration of two low cost RPLidar A1 laser scanners. All the instrumentation of the rover has been interfaced with Robot Operating System (ROS) for online processing and recording of all sensorial data. The ROS based pose and map estimations of the rover have performed using Simultaneous Localization and Mapping (SLAM) technique. The perceived class 1 laser scans data belonging to distinct vicinities with variable reflective properties have been successfully tested and validated for required structural modeling. Systematically the recorded scans have been used in offline mode to generate the 3D point cloud map of the surveyed environment. Later the structural planes extraction from the point cloud data has been done using Random Sampling and Consensus (RANSAC) technique. Finally the 2D floor plan and 3D building model have been developed using point cloud processing in appropriate software. Multiple interiors of existing buildings and under construction indoor sites have been scanned, mapped and modelled as presented in this paper. In addition, the validation of the as-built models have been performed by comparing with the actual architecture design of the surveyed buildings. In comparison to available surveying solutions present in the local market, the developed system has been found faster, accurate and user friendly to produce more enhanced structural results with minute details.