Search

A reasonable micro-pits texture has been initially proved that it can improve friction characteristics between wood and cemented carbide surface and reduce surface friction coefficient. In order to study the cutting performance of the micro-texture when it is applied to the cutting tool for cutting wood more effectively, this paper selected micro-pit texture for studying influence of surface micro-texture cutting tool on wood cutting performance and cutting temperature, finding that when micro-pit cemented carbide cutting tool is adopted for turning the northeast China ash (Fraxinus spp.), it can reduce cutting force of turning and surface friction coefficient between rake face and cuttings. Moreover, for type A and type B cutting tools, when the texture parameters are that the diameter of the micro-pit is 80μm, the depth of the micro pit is: 10μm, area occupancy is 20% and the diameter of the micro-pit is 120μm, the depth of the micro-pit is 10μm and the area occupancy is 20%, the effect generated is the best. When a texture cutting tool is used for cutting, the decrease of the highest temperature in the cutting area is not very great, but the average temperature in the cutting area changes a lot, which is mainly caused by that micro-texture is processed at a position of the rake face close to the main cutting edge and that the highest temperature of cutting is mainly generated on the contact point between tool tip and wood. A reasonable micro-texture parameter can form a layer of liquid lubricating film on the up and down contact surfaces such that the direct contact between cemented carbide and northeast China ash is changed into indirect contact between lubricating films formed by the liquid so as to reduce the surface friction coefficient. [ABSTRACT FROM AUTHOR]

Using existing equations to estimate the biomass of a single tree or a forest stand still involves large uncertainties. In this study, we developed individual-tree biomass models for Chinese Fir (Cunninghamia lanceolata.) stands in Fujian Province, southeast China, by using 74 previously established models that have been most commonly used to estimate tree biomass. We selected the best fit models and modified them. The results showed that the published model ln(B(Biomass)) = a + b * ln(D) + c * (ln(H))2 + d * (ln(H))3 + e * ln(WD) had the best fit for estimating the tree biomass of Chinese Fir stands. Furthermore, we observed that variables D(diameter at breast height), H (height), and WD(wood density)were significantly correlated with the total tree biomass estimation model. As a result, a natural logarithm structure gave the best estimates for the tree biomass structure. Finally, when a multi-step improvement on tree biomass model was performed, the tree biomass model with Tree volume(TV), WD and biomass wood density conversion factor (BECF),achieved the highest simulation accuracy, expressed as ln(TB) = −0.0703 + 0.9780 * ln(TV) + 0.0213 * ln(WD) + 1.0166 * ln(BECF). Therefore, when TV, WD and BECF were combined with tree biomass volume coefficient bi for Chinese Fir, the stand biomass (SB)model included both volume(SV) and coefficient bi variables of the stand as follows: bi = Exp(−0.0703+0.9780*ln(TV)+0.0213 * ln(WD)+1.0166*ln(BECF)). The stand biomass model is SB = SV/TV * bi. [ABSTRACT FROM AUTHOR]

Chinese fir (Cunninghamia lanceolata [Lamb.] Hook) is one of the most important plantation tree species in China with good timber quality and fast growth. It covers an area of 8.54 million hectare, which corresponds to 21% of the total plantation area and 32% of total plantation volume in China. With the increasing market demand, an accurate estimation and prediction of merchantable volume at tree- and stand-level is becoming important for plantation owners. Although there are many studies on the total tree volume estimation from allometric models, these allometric models cannot predict tree- and stand-level merchantable volume at any merchantable height, and the stand-level merchantable volume model was not seen yet in Chinese fir plantations. This study aimed to develop (1) a compatible taper function for tree-level merchantable volume estimation, and (2) a stand-level merchantable volume model for Chinese fir plantations. This “taper function system” consisted in a taper function, a merchantable volume equation and a total tree volume equation. 46 Chinese fir trees were felled to develop the taper function in Shitai County, Anhui province, China. A second-order continuous autoregressive error structure corrected the inherent serial autocorrelation of different observations in one tree. The taper function and volume equations were fitted simultaneously after autocorrelation correction. The compatible taper function fitted well to our data and had very good performances in diameter and total tree volume prediction. The stand-level merchantable volume equation based on the ratio approach was developed using basal area, dominant height, quadratic mean diameter and top diameter (ranging from 0 to 30 cm) as independent variables. At last, a total stand-level volume table using stand basal area and dominant height as variables was proposed for local forest managers to simplify the stand volume estimation. [ABSTRACT FROM AUTHOR]

Located on the Pamir Plateau in Xinjiang Province, China, the Ji'erzankale Necropolis dates back to 2500 yr BP. Many materials that have been unearthed in this cemetery, including shoo konghou (musical instrument), bronze mirrors and glass beads, suggest cultural transference between East and West. Furthermore, small-sized and rounded fire altars made from sweet-scented Sabina were found for the first time and regarded as implements for fire veneration. We identified 70 wooden objects from 25 tombs within the Necropolis, and found that each object had been made from one of seven tree species. Analysis revealed that the inhabitants of the region mainly used the most widely available types of wood, namely Betula and Populus. People also specifically chose inflammable Populus wood to make hearth boards and hand drills (both are used for making fire by drilling), rigid Betula wood to craft wooden plates. Salix was used for fashioning wooden sticks, while sweet-scented Sabina was the preferred choice for making fire altars. Lonicera was selected for arrow shaft manufacture and Fraxinus syriaca, which has a beautiful grain, was chosen for making musical instruments. Conscious selection of different types of wood indicates that people of the Pamir Plateau were aware of the properties of various types of timbers, and were able to exploit these properties to the full. In turn, this demonstrates their wisdom and their ability to survive in, and adapt to, their local environment.