Search

Reading is considered a non-intuitive, cognitively demanding ability requiring synchronization between several neural networks supporting visual, language processing and higher-order abilities. With the involvement of technology in our everyday life, reading from a screen has become widely used. Several studies point to challenges in processing written materials from the screen due to changes in attention allocation when reading from a screen compared to reading from a printed paper. The current study examined the differences in brain activation when reading from a screen compared to reading from a printed paper focusing on spectral power related to attention in fifteen 6-8-year-old children. Using an electroencephalogram, children read two different age-appropriate texts, without illustrations, presented randomly on the screen and on a printed paper. Data were analyzed using spectral analyses in brain regions related to language, visual processing, and cognitive control, focusing on theta vs. beta waveforms. Results indicated that while reading from a printed paper was accompanied by higher energy in high-frequency bands (beta, gamma), reading from the screen was manifested by a higher power in the lower frequency bands (alpha, theta). Higher theta compared to the beta ratio, representing challenges in allocating attention to a given task, was found for the screen reading compared to the printed paper reading condition. Also, a significant negative correlation was found between differences in theta/beta ratio for screen vs paper reading and accuracy level in the age-normalized Sky-Search task measuring attention and a positive correlation with performance time. These results provide neurobiological support for the greater cognitive load and reduced focused attention during screen-based compared to print-based reading and suggest a different reliance on attention resources for the two conditions in children.

Women are under-represented among authors of scientific papers. Although the number of retractions has been rising over the past few decades, gender differences among authors of retracted papers remain poorly understood. Therefore, this study investigated gender differences in authorship of retracted papers in biomedical sciences available on RetractionWatch. Among 35,635 biomedical articles retracted between 1970 and 2022, including 20,849 first authors and 20,413 last authors, women accounted for 27.4% [26.8 to 28.0] of first authors and 23.5% [22.9 to 24.1] of last authors. The lowest representation of women was found for fraud (18.9% [17.1 to 20.9] for first authors and 13.5% [11.9 to 15.1] for last authors) and misconduct (19.5% [17.3 to 21.9] for first authors and 17.8% [15.7 to 20.3] for last authors). Women’s representation was the highest for issues related to editors and publishers (35.1% [32.2 to 38.0] for first authors and 24.8% [22.9 to 26.8] for last authors) and errors (29.5% [28.0 to 31.0] for first authors and 22.1% [20.7 to 23.4] for last authors). Most retractions (60.9%) had men as first and last authors. Gender equality could improve research integrity in biomedical sciences.

In our study, we have empirically studied the assessment of cited papers within the framework of the anchoring-and-adjustment heuristic. We are interested in the question whether the assessment of a paper can be influenced by numerical information that act as an anchor (e.g. citation impact). We have undertaken a survey of corresponding authors with an available email address in the Web of Science database. The authors were asked to assess the quality of papers that they cited in previous papers. Some authors were assigned to three treatment groups that receive further information alongside the cited paper: citation impact information, information on the publishing journal (journal impact factor) or a numerical access code to enter the survey. The control group did not receive any further numerical information. We are interested in whether possible adjustments in the assessments can not only be produced by quality-related information (citation impact or journal impact), but also by numbers that are not related to quality, i.e. the access code. Our results show that the quality assessments of papers seem to depend on the citation impact information of single papers. The other information (anchors) such as an arbitrary number (an access code) and journal impact information did not play a (important) role in the assessments of papers. The results point to a possible anchoring bias caused by insufficient adjustment: it seems that the respondents assessed cited papers in another way when they observed paper impact values in the survey. We conclude that initiatives aiming at reducing the use of journal impact information in research evaluation either were already successful or overestimated the influence of this information.

Bisphenol A (BPA) is an industrial chemical that is widely used in various industrial applications. It has concerns in its use as a color developer in thermal paper receipts since it is identified as an endocrine disruptor and causes hormonal disturbances. In this study, thirty thermal paper receipt samples were randomly collected from various locations in Sharjah, United Arab Emirates and analyzed using high performance liquid chromatography–mass spectrometry. Sixty percent (60%) of receipt samples showed BPA levels above the acceptable limit (200 ng/mg) set by the European Union (EU) for thermal papers. On the other hand, 40% of the samples reported very low BPA levels (< 0.02 ng/mg). However, estimated weight adjusted daily intakes (EDI) ranged between 8.22 ×10−11 and 0.000812 μg/kg bw/day for the general population, and between 7.89×10−9 and 0.0681 μg/kg bw/day for the occupationally exposed cashiers. Thus, all calculated EDIs were below the European Food Safety Authority Tolerable Daily Intake (4 μg/kg·bw/day) and the provisional Health Canada Tolerable Daily Intake (25 ug/kg bw/day) under varying paper-to-skin transfer coefficients and absorption fractions. Nevertheless, due to its health effects and recent legal restrictions by EU, the occurrence of co-exposure to dietary and non-dietary sources should be considered in the health risk assessment of Bisphenol A, mainly for people with frequent occupational exposure to thermal paper, and especially with the increased use of sanitizers. The current study is a first within the UAE context in relation to BPA in thermal paper receipts, thus its significance especially with the recent EU enforcement of BPA limits in paper receipts. The study highlights that proper policies as well as education and awareness may assist in limiting transdermal BPA exposure for the general and occupationally exposed populations.

How the role of dopamine differs according to the evolution of eusociality and how it is required in the flexible society of Polistes paper wasps need further clarification. In the present study, we compared the storage and usage of dopamine-related substances in brains between the castes of paper wasps. The head widths, lipid stores in the abdomen, and levels of biogenic amines in the brains were measured in newly emerged females before male emergence (workers) and after male emergence (gynes) in four Polistes species. The head widths and the lipid stores were significantly larger in gynes than workers in P. snelleni, P. rothneyi, and P. jokahamae, whereas they did not differ between castes in P. chinensis. The levels of dopamine precursors in the brains were significantly higher in gynes than workers in P. snelleni, P. chinensis, and P. rothneyi, whereas those of dopamine and its metabolites did not differ between castes in these species. In P. jokahamae, the levels of dopamine precursors and dopamine in the brains did not differ between castes, but those of a dopamine metabolite were significantly higher in gynes than workers. Thus, the caste differences in the levels of dopamine-related substances did not always match body sizes and nutritional reserves. Foundresses in P. rothneyi had significantly lower levels of dopamine precursors and higher levels of dopamine and its metabolite than newly emerged gynes. These results suggested that in several Polistes species, dopamine precursors were stored in the brain without dopamine biosynthesis at emergence, and then converted into dopamine in foundresses during colony founding. These neuroendocrinal states in Polistes species largely differed from those in eusocial bees.

Invasive paper wasps such as Polistes dominula are a major pest and problem for biodiversity around the globe. Safe and highly targeted methods for the control of these and other social wasp populations are needed. We attempted to identify potentially-lethal gene targets that could be used on adult paper wasps in a gene silencing or RNA interference (RNAi) approach. Double-stranded RNA (dsRNA) was designed to target genes for which silencing has proven lethal in other insects. dsRNA was provided either orally to foragers or directly injected into the wasps. We also provided the dsRNA unprotected or protected from degradation by gut nucleases in two different forms (lipofectamine and carbon quantum dots). The effects of oral delivery of 22 different gene targets to forager wasps was evaluated. The expression of five different genes was successfully reduced following dsRNA ingestion or injection. These gene targets included the FACT complex subunit spt16 (DRE4) and RNA-binding protein fusilli (FUSILLI), both of which have been previously shown to have potential as lethal targets for pest control in other insects. However, we found no evidence of significant increases in adult wasp mortality following ingestion or injection of dsRNA for these genes when compared with control treatments in our experiments. The methods we used to protect the dsRNA from digestive degradation altered gene expression but similarly did not influence wasp mortality. Our results indicate that while many of the same gene targets can be silenced and induce mortality in other insects, dsRNA and RNAi approaches may not be useful for paper wasp control.

Some macroalgae drift on the ocean and are stranded on coasts, and these stranded brown macroalgae are regarded to be degraded by organisms. Alginate is a major component of brown macroalgae. An uncovering of how carbon is cycled through brown macroalgae is needed to deeply understand coastal ecosystems. In this study, to gain insights into metabolism of brown macroalgae and alginate in the organisms, we initially confirmed that supralittoral talitrid amphipods (beach fleas or sandhoppers collected on the Shibagaki coast in Ishikawa Prefecture, Japan) fed on the brown macroalgae. We then isolated bacteria such as Vibrio sp. with alginate-assimilating capability from the gut of the amphipods. Metagenomic analysis of the gut of amphipods housed in several conditions (e.g. macroalgae or paper as feed, non-sterilized or sterilized environment) showed no condition-dependent compositions of bacteria and fungi, but Vibrio sp. were detected at high frequency, in good agreement with the isolation of Vibrio sp. An intervention study using antibiotics showed that amphipods fed on algae or paper at about the same rate in the presence or absence of antibiotics, and that the antibiotics had no effects on the life span. Moreover, intervention with antibiotics completely killed Vibrio sp. and some other bacteria, and had significant effects on the composition of the flora in the gut, with elimination of the variations observed in the guts of amphipods housed without antibiotics. These data suggest that microbes that were killed by antibiotics, including Vibrio sp., in the gut of talitrid amphipods are not essential for assimilation of brown macroalgae.

Nucleic acid amplification is a sensitive and powerful tool for allergen detection. However, it is limited due to the relatively cumbersome methods required to extract nucleic acids from single plant seed allergen (e.g. peanut and soybean). In view of this, an approach of extracting nucleic acid with untreated glass-fiber paper (paper-based microfluidics) was applied for nucleic acid capture and purification from plant seed allergen and commercial products. After cut by hollow cylindrical cutter, a certain size the paper chip it used to absorb DNA. And this paper-based microfluidics with DNA was directly applied for amplification by loop-mediated isothermal amplification (LAMP). To evaluate the adsorption performance of paper chip to DNA, CTAB and SDS method were used as comparisons. From amplification results, the established technique has good specificity, high repeatability (C.V. values are 4.41% and 6.17% for peanut and soybean) and favorable sensitivity (7.39 ng/μL or peanut and 6.6 ng/μL for soybean), and successfully used for commercial products (2 kinds of candy and 2 kinds of cakes containing peanut, and 2 kinds of drinks, candy and 2 kinds of biscuits containing soybean). This speed and flexible detection method makes it suit for applications in point-of-care (POC) detection at different scenario, such as custom house and import port.

BackgroundPromoting physical activity (PA) for university students is essential as PA levels decrease during the transition from secondary to higher education. Providing technology-supported university courses targeting students’ PA levels may be a viable option to combat the problem. However, it is still unclear how and what technologies should be implemented in university courses to promote PA. This study aims to create a series of design principles for technology-supported physical education courses that aim to increase university students’ PA knowledge, motivation and levels.MethodThe proposed methodology underpinning the research program is a seven-phase design-based research (DBR) approach, with the seven phases encompassed in four sequential studies. These four studies are a systematic review, a qualitative focus group study, a pilot study, and a randomised controlled trial (RCT) study. The protocol paper aims to detail the plan for conducting the four studies in a comprehensive and transparent manner, thus contributing to the methodological evidence base in this field.DiscussionDesign principles generated from this project will contribute to the growing evidence focusing on effective design and implementation features. Future practitioners can also use these to develop physical education courses that aim to promote university students’ physical activity levels, knowledge, and motivation.Ethical considerationThis project has obtained ethical approval from the University of Sydney Human Research Ethics Committee (Project No. 2021/071; Project No. 2021/935). The randomised controlled trial protocol is registered at the Australian New Zealand Clinical Trials Registry (ANZCTR).Trial registrationthe RCT registry number: ACTRN12622000712707, 18/05/2022

Humans introduced paper mulberry (Broussonetia papyrifera) from Taiwan into the Pacific over 5000 years ago as a fiber source to make barkcloth textiles that were, and still are, important cultural artifacts throughout the Pacific. We have used B. papyrifera, a species closely associated to humans, as a proxy to understand the human settlement of the Pacific Islands. We report the first genetic analysis of paper mulberry textiles from historical and archaeological contexts (200 to 50 years before present) and compare our results with genetic data obtained from contemporary and herbarium paper mulberry samples. Following stringent ancient DNA protocols, we extracted DNA from 13 barkcloth textiles. We confirmed that the fiber source is paper mulberry in nine of the 13 textiles studied using the nuclear ITS-1 marker and by statistical estimates. We detected high genetic diversity in historical Pacific paper mulberry barkcloth with a set of ten microsatellites, showing new alleles and specific genetic patterns. These genetic signatures allow tracing connections to plants from the Asian homeland, Near and Remote Oceania, establishing links not observed previously (using the same genetic tools) in extant plants or herbaria samples. These results show that historic barkcloth textiles are cultural materials amenable to genetic analysis to reveal human history and that these artifacts may harbor evidence of greater genetic diversity in Pacific B. papyrifera in the past.

IntroductionLiterature is lacking on the safety of storing contaminated PPE in paper bags for reuse, potentially increasing exposure to frontline healthcare workers (HCW) and patients.ObjectivesTo evaluate the effectiveness of paper bags as a barrier for fomite transmission of SARS-CoV-2 by storing limited reusable face masks, respirators, and face shields.MethodsThis quasi-experimental study evaluated the presence of SARS-CoV-2 on the interior and exterior surfaces of paper bags containing PPE that had aerosolized exposures in clinical and simulated settings. Between May and October 2020, 30 unique PPE items were collected from critical and intermediate care COVID-19 units at two urban hospitals. Exposed PPE, worn by either an infected patient or HCW during a SARS-CoV-2 aerosolizing event, were placed into an unused brown paper bag. Samples were tested at 30-minute and 12-hour intervals.ResultsA total of 177 swabs were processed from 30 PPE samples. We found a (12/177 total) 6.8% positivity rate among all samples across both collection sites. Highest positivity rates were associated with ventilator disconnection (1/6 samples, 16.7% positivity) and exposure to respiratory droplets from coughing (2/24 samples, 8.3% positivity), compared to exposure to high-flow nasal cannula (8/129 samples, 6.2% positivity) or tracheostomy surgery (1/18 samples, 5.6% positivity). Positivity rates differed between hospital units. Total positivity rates were similar between 30-minute (6.7%) and 12-hour (6.9%) sample testing time intervals. Control samples exposed to inactivated SARS-CoV-2 droplets had higher total viral counts than samples exposed to nebulized aerosols.ConclusionsData suggests paper bags are not a significant fomite risk for SARS-CoV-2 transmission. However, controls demonstrated a risk with droplet exposure. Data can inform guidelines for storing and re-using PPE in situations of limited supplies during future pandemics.

We propose a stochastic generative model to represent a directed graph constructed by citations among academic papers, where nodes and directed edges represent papers with discrete publication time and citations respectively. The proposed model assumes that a citation between two papers occurs with a probability based on the type of the citing paper, the importance of cited paper, and the difference between their publication times, like the existing models. We consider the out-degrees of citing paper as its type, because, for example, survey paper cites many papers. We approximate the importance of a cited paper by its in-degrees. In our model, we adopt three functions: a logistic function for illustrating the numbers of papers published in discrete time, an inverse Gaussian probability distribution function to express the aging effect based on the difference between publication times, and an exponential distribution (or a generalized Pareto distribution) for describing the out-degree distribution. We consider that our model is a more reasonable and appropriate stochastic model than other existing models and can perform complete simulations without using original data. In this paper, we first use the Web of Science database and see the features used in our model. By using the proposed model, we can generate simulated graphs and demonstrate that they are similar to the original data concerning the in- and out-degree distributions, and node triangle participation. In addition, we analyze two other citation networks derived from physics papers in the arXiv database and verify the effectiveness of the model.

Background Advances in medicine and public health mean that people are living longer; however, a significant proportion of that increased lifespan is spent in a prolonged state of declining health and wellbeing which places increasing pressure on medical, health and social services. There is a social and economic need to develop strategies to prevent or delay age-related disease and maintain lifelong health. Several studies have suggested links between the gut microbiome and age-related disease, which if confirmed would present a modifiable target for intervention development. The MOTION study aims to determine whether and how changes in the gut microbiome are associated with physical and mental capacity. A comprehensive longitudinal multiparameter study such as this has not been previously undertaken. Methods MOTION is a longitudinal prospective cohort study with a focus on gut health and cognitive function. 360 healthy individuals aged 60 years and older, living in East Anglia, UK will be recruited to the study, stratified into one of three risk groups (cohorts) for developing dementia based on their cognitive function. Participants will attend study appointments every six months over four years, providing stool and blood samples and a health questionnaire. Participants will also undergo physical measurements and cognitive tests at alternating appointments, and undergo Optical Coherence Tomography scans at 3 timepoints. Two subgroups of participants in the study will provide colonic tissue biopsies (n = ≥30 from each cohort), and brain imaging (n = 30) at two timepoints. Discussion This study will provide new insights into the gut-(microbiota)-brain axis and the relationship between age-associated changes in gut microbe populations and cognitive health. Such insights could help develop new microbe-based strategies to improve lifelong health and wellbeing. Trial registration This study is registered in the ClinicalTrials.gov Database with ID: NCT04199195 Registered: May 14, 2019.

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. © 2019 Howison et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming.

In our planned study, we shall empirically study the assessment of cited papers within the framework of the anchoring-and-adjustment heuristic. We are interested in the question whether citation decisions are (mainly) driven by the quality of cited references. The design of our study is oriented towards the study by Teplitskiy, Duede [10]. We shall undertake a survey of corresponding authors with an available email address in the Web of Science database. The authors are asked to assess the quality of papers that they cited in previous papers. Some authors will be assigned to three treatment groups that receive further information alongside the cited paper: citation information, information on the publishing journal (journal impact factor), or a numerical access code to enter the survey. The control group will not receive any further numerical information. In the statistical analyses, we estimate how (strongly) the quality assessments of the cited papers are adjusted by the respondents to the anchor value (citation, journal, or access code). Thus, we are interested in whether possible adjustments in the assessments can not only be produced by quality-related information (citation or journal), but also by numbers that are not related to quality, i.e. the access code. The results of the study may have important implications for quality assessments of papers by researchers and the role of numbers, citations, and journal metrics in assessment processes.

The cost of specialized scientific equipment can be high and with limited funding resources, researchers and students are often unable to access or purchase the ideal equipment for their projects. In the fields of materials science and mechanical engineering, fundamental equipment such as tensile testing devices can cost tens to hundreds of thousands of dollars. While a research lab often has access to a large-scale testing machine suitable for conventional samples, loading devices for meso- and micro-scale samples for in-situ testing with the myriad of microscopy tools are often hard to source and cost prohibitive. Open-source software has allowed for great strides in the reduction of costs associated with software development and open-source hardware and additive manufacturing have the potential to similarly reduce the costs of scientific equipment and increase the accessibility of scientific research. To investigate the feasibility of open-source hardware, a micro-tensile tester was designed with a freely accessible computer-aided design package and manufactured with a desktop 3D-printer and off-the-shelf components. To our knowledge this is one of the first demonstrations of a tensile tester with additively manufactured components for scientific research. The capabilities of the tensile tester were demonstrated by investigating the mechanical properties of Graphene Oxide (GO) paper and thin films. A 3D printed tensile tester was successfully used in conjunction with an atomic force microscope to provide one of the first quantitative measurements of GO thin film buckling under compression. The tensile tester was also used in conjunction with an atomic force microscope to observe the change in surface topology of a GO paper in response to increasing tensile strain. No significant change in surface topology was observed in contrast to prior hypotheses from the literature. Based on this result obtained with the new open source tensile stage we propose an alternative hypothesis we term 'superlamellae consolidation' to explain the initial deformation of GO paper. The additively manufactured tensile tester tested represents cost savings of >99% compared to commercial solutions in its class and offers simple customization. However, continued development is needed for the tensile tester presented here to approach the technical specifications achievable with commercial solutions.

Before organizing mixed-mode data collection for the self-administered questionnaire of the Belgian Health Interview Survey, measurement effects between the paper-and-pencil and the web-based questionnaire were evaluated. A two-period cross-over study was organized with a sample of 149 employees of two Belgian research institutes (age range 22-62 years, 72% female). Measurement agreement was assessed for a diverse range of health indicators related to general health, mental and psychosocial health, health behaviors and prevention with kappa coefficients and intraclass correlation (ICC). The quality of the data collected by both modes was evaluated by quantifying the missing, 'don't know' and inconsistent values and data entry mistakes. Good to very good agreement was found for all categorical indicators with kappa coefficients superior to 0.60, except for two mental and psychosocial health indicators namely the presence of a sleeping disorder and of a depressive disorder (kappa≥0.50). For the continuous indicators high to acceptable agreement was observed with ICC superior to 0.70. Inconsistent answers and data-entry mistakes were only occurring in the paper-and-pencil mode. There were no less missing values in the web-based mode compared to the paper-and-pencil mode. The study supports the idea that web-based modes provide, in general, equal responses to paper-and-pencil modes. However, health indicators based upon factual and objective items tend to have higher measurement agreement than indicators requiring an assessment of personal subjective feelings. A web-based mode greatly facilitates the data-entry process and guides the completing of a questionnaire. However, item non-response was not positively affected. ispartof: PLOS ONE vol:13 issue:5 ispartof: location:United States status: published

Objective To survey the knowledge, attitude, and practices of Vietnamese pharmacists regarding the COVID-19 pandemic. Method This cross-sectional, paper-based study was conducted from June to August 2020. A validated questionnaire (Cronbach’s alpha = 0.84) was used to interview 1,023 pharmacists in nine provinces of Vietnam. Analysis of covariance was employed to identify factors associated with the knowledge of pharmacists. The best model was chosen by using the Bayesian Model Averaging method in R software version 4.0.4. Results The mean knowledge score was 12.02 ± 1.64 (range: 6–15), which indicated that 93.4% of pharmacists had good knowledge of COVID-19. There was no difference in the average score between males and females (p > 0.05). The multivariate linear regression model revealed that the knowledge was significantly associated with pharmacists’ age, education level, and residence (p < 0.001). About attitude and practices, pharmacists daily sought and updated information on the COVID-19 pandemic through mass media and the internet (social network and online newspapers). Nearly 48% of them conceded that they communicated with customers when at least one person did not wear a face mask at the time of the COVID-19 outbreak. At medicine outlets, many measures were applied to protect pharmacists and customers, such as equipping pharmacists with face masks and hand sanitizers (95.0%), using glass shields (83.0%), and maintaining at least one-meter distance between two people (85.2%). Conclusion The pharmacists’ knowledge of COVID-19 transmission, symptoms, and prevention was good. Many useful measures against the spread of this perilous virus were applied in medicine outlets. However, pharmacists should restrict forgetting to wear face masks in communication with medicine purchasers. The government and health agencies should have practical remedies to reduce the significant differences in the COVID-19 knowledge of pharmacists among provinces and education-level groups.

We propose to use Twitter data as social-spatial sensors. This study deals with the question whether research papers on certain diseases are perceived by people in regions (worldwide) that are especially concerned by these diseases. Since (some) Twitter data contain location information, it is possible to spatially map the activity of Twitter users referring to certain papers (e.g., dealing with tuberculosis). The resulting maps reveal whether heavy activity on Twitter is correlated with large numbers of people having certain diseases. In this study, we focus on tuberculosis, human immunodeficiency virus (HIV), and malaria, since the World Health Organization ranks these diseases as the top three causes of death worldwide by a single infectious agent. The results of the social-spatial Twitter maps (and additionally performed regression models) reveal the usefulness of the proposed sensor approach. One receives an impression of how research papers on the diseases have been perceived by people in regions that are especially concerned by these diseases. Our study demonstrates a promising approach for using Twitter data for research evaluation purposes beyond simple counting of tweets.

There is demand from science funders, industry, and the public that science should become more risk-taking, more out-of-the-box, and more interdisciplinary. Is it possible to tell how interdisciplinary and out-of-the-box scientific papers are, or which papers are mainstream? Here we use the bibliographic coupling network, derived from all physics papers that were published in the Physical Review journals in the past century, to try to identify them as mainstream, out-of-the-box, or interdisciplinary. We show that the network clusters into scientific fields. The position of individual papers with respect to these clusters allows us to estimate their degree of mainstreamness or interdisciplinary. We show that over the past decades the fraction of mainstream papers increases, the fraction of out-of-the-box decreases, and the fraction of interdisciplinary papers remains constant. Studying the rewards of papers, we find that in terms of absolute citations, both, mainstream and interdisciplinary papers are rewarded. In the long run, mainstream papers perform less than interdisciplinary ones in terms of citation rates. We conclude that to avoid a trend towards mainstreamness a new incentive scheme is necessary., 12 pages, 9 figures

In this paper, we present a facile and cost-effective method to obtain superhydrophobic filter paper and demonstrate its application for efficient water/oil separation. By coupling structurally distinct organosilane precursors (e.g., octadecyltrichlorosilane and methyltrichlorosilane) to paper fibers under controlled reaction conditions, we have formulated a simple, inexpensive, and efficient protocol to achieve a desirable superhydrophobic and superoleophilic surface on conventional filter paper. The silanized superhydrophobic filter paper showed nanostructured morphology and demonstrated great separation efficiency (up to 99.4%) for water/oil mixtures. The modified filter paper is stable in both aqueous solutions and organic solvents, and can be reused multiple times. The present study shows that our newly developed binary silanization is a promising method of modifying cellulose-based materials for practical applications, in particular the treatment of industrial waste water and ecosystem recovery.

Type 1 diabetes (T1D) is increasing in incidence and predictable with measurement of serum islet autoantibodies (iAb) years prior to clinical disease onset. Identifying iAb positive individuals reduces diabetic ketoacidosis and identifies individuals for T1D prevention trials. However, large scale screening for iAb remains challenging as assays have varying sensitivities and specificities, insulin autoantibodies remain difficult to measure and venipuncture is generally required to obtain serum. We developed an approach to reliably measure all four major iAb, including insulin autoantibodies, from dried blood spots (DBS) on filter-paper. By spiking iAb positive serum into iAb negative whole blood in a dose titration, we optimized the conditions for autoantibody elution from filter paper as measured by fluid phase radioimmunoassays. After assessing stability of measuring iAb from DBS over time, we then screened iAb from DBS and the corresponding serum in new-onset T1D (n = 52), and controls (n = 72) which included first-degree relatives of T1D patients. iAb measured from eluted DBS in new-onset T1D strongly correlated with serum measurements (R2 = 0.96 for mIAA, GADA = 0.94, IA-2A = 0.85, ZnT8A = 0.82, p

Background Paper mulberry (Broussonetia papyrifera (L.) L'Hér. ex Vent) is a dioecious tree native to East Asia and mainland Southeast-Asia, introduced prehistorically to Polynesia as a source of bark fiber by Austronesian-speaking voyagers. In Oceania, trees are coppiced and harvested for production of bark-cloth, so flowering is generally unknown. A survey of botanical records of paper mulberry revealed a distributional disjunction: the tree is apparently absent in Borneo and the Philippines. A subsequent study of chloroplast haplotypes linked paper mulberry of Remote Oceania directly to a population in southern Taiwan, distinct from known populations in mainland Southeast-Asia. Methodology We describe the optimization and use of a DNA marker designed to identify sex in paper mulberry. We used this marker to determine the sex distribution in selected localities across Asia, Near and Remote Oceania. We also characterized all samples using the ribosomal internal transcribed spacer sequence (ITS) in order to relate results to a previous survey of ITS diversity. Results In Near and Remote Oceania, contemporary paper mulberry plants are all female with the exception of Hawaii, where plants of both sexes are found. In its natural range in Asia, male and female plants are found, as expected. Male plants in Hawaii display an East Asian ITS genotype, consistent with modern introduction, while females in Remote Oceania share a distinctive variant. Conclusions Most paper mulberry plants now present in the Pacific appear to be descended from female clones introduced prehistorically. In Hawaii, the presence of male and female plants is thought to reflect a dual origin, one a prehistoric female introduction and the other a modern male introduction by Japanese/Chinese immigrants. If only female clones were dispersed from a source-region in Taiwan, this may explain the absence of botanical records and breeding populations in the Philippines and Borneo, and Remote Oceania.

It is important to implement detection and assessment of plant diseases based on remotely sensed data for disease monitoring and control. Hyperspectral data of healthy leaves, leaves in incubation period and leaves in diseased period of wheat stripe rust and wheat leaf rust were collected under in-field conditions using a black-paper-based measuring method developed in this study. After data preprocessing, the models to identify the diseases were built using distinguished partial least squares (DPLS) and support vector machine (SVM), and the disease severity inversion models of stripe rust and the disease severity inversion models of leaf rust were built using quantitative partial least squares (QPLS) and support vector regression (SVR). All the models were validated by using leave-one-out cross validation and external validation. The diseases could be discriminated using both distinguished partial least squares and support vector machine with the accuracies of more than 99%. For each wheat rust, disease severity levels were accurately retrieved using both the optimal QPLS models and the optimal SVR models with the coefficients of determination (R2) of more than 0.90 and the root mean square errors (RMSE) of less than 0.15. The results demonstrated that identification and severity evaluation of stripe rust and leaf rust at the leaf level could be implemented based on the hyperspectral data acquired using the developed method. A scientific basis was provided for implementing disease monitoring by using aerial and space remote sensing technologies.

In order to reduce the ecotoxicity of paper mill, four different enzymatic pretreatment strategies were investigated in comparison to conventional chemical based processes. In strategy I, xylanase-aided pretreatment of pulp was carried out, and in strategy II, xylanase and laccase-mediator systems were used sequentially. Moreover, to compare the efficiency of Bacillus stearothermophilus xylanase and Ceriporiopsis subvermispora laccase in the reduction of ecotoxicity and pollution, parallel strategies (III and IV) were implemented using commercial enzymes. Conventional C(D)E(OP)D(1)D(2) (C(D), Cl(2) with ClO2; EOP, H2O2 extraction; D1 and D2, ClO2) and X/XLC(D)E(OP)D(1)D(2) (X, xylanase; L, laccase) sequences were employed with non-enzymatic and enzymatic strategies, respectively. Acute toxicity was determined by the extent of inhibition of bioluminescence of Vibrio fischeri with different dilutions of the effluent. Two-fold increase was observed in EC50 values for strategy I compared to the control process. On the other hand, sequential application of commercial enzymes resulted in higher acute toxicity compared to lab enzymes. In comparison to the control process, strategy II was the most efficient and successfully reduced 60.1 and 25.8% of biological oxygen demand (BOD) and color of effluents, respectively. We report for the first time the comparative analysis of the ecotoxicity of industrial effluents.

Here we describe an ultra-low-cost origami-based approach for large-scale manufacturing of microscopes, specifically demonstrating brightfield, darkfield, and fluorescence microscopes. Merging principles of optical design with origami enables high-volume fabrication of microscopes from 2D media. Flexure mechanisms created via folding enable a flat compact design. Structural loops in folded paper provide kinematic constraints as a means for passive self-alignment. This light, rugged instrument can survive harsh field conditions while providing a diversity of imaging capabilities, thus serving wide-ranging applications for cost-effective, portable microscopes in science and education.

Background Adiponectin is an adipocyte-derived hormone that acts as a marker of insulin sensitivity. Bloodspot sampling by fingerstick onto filter paper may increase the feasibility of large-scale studies of the determinants of insulin sensitivity. We first describe the validation of an enzyme-linked immunoassay (ELISA) for quantifying adiponectin from dried blood spots and then demonstrate its application in a large trial (PROBIT). Methods We quantified adiponectin from 3-mm diameter discs (≈3 µL of blood) punched from dried blood spots obtained from: i) whole blood standards (validation); and ii) PROBIT trial samples (application) in which paediatricians collected blood spots from 13,879 children aged 11.5 years from 31 sites across Belarus. We examined the distribution of bloodspot adiponectin by demographic and anthropometric factors, fasting insulin and glucose. Results In the validation study, mean intra-assay coefficients of variation (n = 162) were 15%, 13% and 10% for ‘low’ (6.78 µg/ml), ‘medium’ (18.18 µg/ml) and 'high’ (33.13 µg/ml) internal quality control (IQC) samples, respectively; the respective inter-assay values (n = 40) were 23%, 21% and 14%. The correlation coefficient between 50 paired whole bloodspot versus plasma samples, collected simultaneously, was 0.87 (95% CI: 0.78 to 0.93). Recovery of known quantities of adiponectin (between 4.5 to 36 µg/ml) was 100.3–133%. Bloodspot adiponectin was stable for at least 30 months at −80°C. In PROBIT, we successfully quantified fasting adiponectin from dried blood spots in 13,329 of 13,879 (96%) children. Mean adiponectin (standard deviation) concentrations were 17.34 µg/ml (7.54) in boys and 18.41 µg/ml (7.92) in girls and were inversely associated with body mass index, fat mass, triceps and subscapular skin-fold thickness, waist circumference, height and fasting glucose. Conclusions Bloodspot ELISA is suitable for measuring adiponectin in very small volumes of blood collected on filter paper and can be applied to large-scale studies.

E-readers are fast rivaling print as a dominant method for reading. Because they offer accessibility options that are impossible in print, they are potentially beneficial for those with impairments, such as dyslexia. Yet, little is known about how the use of these devices influences reading in those who struggle. Here, we observe reading comprehension and speed in 103 high school students with dyslexia. Reading on paper was compared with reading on a small handheld e-reader device, formatted to display few words per line. We found that use of the device significantly improved speed and comprehension, when compared with traditional presentations on paper for specific subsets of these individuals: Those who struggled most with phoneme decoding or efficient sight word reading read more rapidly using the device, and those with limited VA Spans gained in comprehension. Prior eye tracking studies demonstrated that short lines facilitate reading in dyslexia, suggesting that it is the use of short lines (and not the device per se) that leads to the observed benefits. We propose that these findings may be understood as a consequence of visual attention deficits, in some with dyslexia, that make it difficult to allocate attention to uncrowded text near fixation, as the gaze advances during reading. Short lines ameliorate this by guiding attention to the uncrowded span.

Research paper recommenders emerged over the last decade to ease finding publications relating to researchers' area of interest. The challenge was not just to provide researchers with very rich publications at any time, any place and in any form but to also offer the right publication to the right researcher in the right way. Several approaches exist in handling paper recommender systems. However, these approaches assumed the availability of the whole contents of the recommending papers to be freely accessible, which is not always true due to factors such as copyright restrictions. This paper presents a collaborative approach for research paper recommender system. By leveraging the advantages of collaborative filtering approach, we utilize the publicly available contextual metadata to infer the hidden associations that exist between research papers in order to personalize recommendations. The novelty of our proposed approach is that it provides personalized recommendations regardless of the research field and regardless of the user's expertise. Using a publicly available dataset, our proposed approach has recorded a significant improvement over other baseline methods in measuring both the overall performance and the ability to return relevant and useful publications at the top of the recommendation list.

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors' collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews.

Paper mulberry (Broussonetia papyrifera (L.) L'Hér. ex Vent) is a dioecious tree native to East Asia and mainland Southeast-Asia, introduced prehistorically to Polynesia as a source of bark fiber by Austronesian-speaking voyagers. In Oceania, trees are coppiced and harvested for production of bark-cloth, so flowering is generally unknown. A survey of botanical records of paper mulberry revealed a distributional disjunction: the tree is apparently absent in Borneo and the Philippines. A subsequent study of chloroplast haplotypes linked paper mulberry of Remote Oceania directly to a population in southern Taiwan, distinct from known populations in mainland Southeast-Asia.We describe the optimization and use of a DNA marker designed to identify sex in paper mulberry. We used this marker to determine the sex distribution in selected localities across Asia, Near and Remote Oceania. We also characterized all samples using the ribosomal internal transcribed spacer sequence (ITS) in order to relate results to a previous survey of ITS diversity.In Near and Remote Oceania, contemporary paper mulberry plants are all female with the exception of Hawaii, where plants of both sexes are found. In its natural range in Asia, male and female plants are found, as expected. Male plants in Hawaii display an East Asian ITS genotype, consistent with modern introduction, while females in Remote Oceania share a distinctive variant.Most paper mulberry plants now present in the Pacific appear to be descended from female clones introduced prehistorically. In Hawaii, the presence of male and female plants is thought to reflect a dual origin, one a prehistoric female introduction and the other a modern male introduction by Japanese/Chinese immigrants. If only female clones were dispersed from a source-region in Taiwan, this may explain the absence of botanical records and breeding populations in the Philippines and Borneo, and Remote Oceania.

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a "dying" paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing "offspring". Practically, this might be used to trace the successive published milestones of a research field., SCOPUS: ar.j, info:eu-repo/semantics/published

BackgroundAlthough researchers have worked in collaboration since the origins of modern science and the publication of the first scientific journals in the eighteenth century, this phenomenon has acquired exceptional importance in the last several decades. Since the mid-twentieth century, new knowledge has been generated from within an ever-growing network of investigators, working cooperatively in research groups across countries and institutions. Cooperation is a crucial determinant of academic success.ObjectiveThe aim of the present paper is to analyze the evolution of scientific collaboration at the micro level, with regard to the scientific production generated on psoriasis research.MethodsA bibliographic search in the Medline database containing the MeSH terms "psoriasis" or "psoriatic arthritis" was carried out. The search results were limited to articles, reviews and letters. After identifying the co-authorships of documents on psoriasis indexed in the Medline database (1942-2013), various bibliometric indicators were obtained, including the average number of authors per document and degree of multi-authorship over time. In addition, we performed a network analysis to study the evolution of certain features of the co-authorship network as a whole: average degree, size of the largest component, clustering coefficient, density and average distance. We also analyzed the evolution of the giant component to characterize the changing research patterns in the field, and we calculated social network indicators for the nodes, namely betweenness and closeness.ResultsThe main active research clusters in the area were identified, along with their authors of reference. Our analysis of 28,670 documents sheds light on different aspects related to the evolution of scientific collaboration in the field, including the progressive increase in the mean number of co-authors (which stood at 5.17 in the 2004-2013 decade), and the rise in multi-authored papers signed by many different authors (in the same decade, 25.77% of the documents had between 6 and 9 co-authors, and 10.28% had 10 or more). With regard to the network indicators, the average degree gradually increased up to 10.97 in the study period. The percentage of authors pertaining to the largest component also rose to 73.02% of the authors. The clustering coefficient, on the other hand, remained stable throughout the entire 70-year period, with values hovering around 0.9. Finally, the average distance peaked in the decades 1974-1983 (8.29) and 1984-2003 (8.12) then fell over the next two decades, down to 5.25 in 2004-2013. The construction of the co-authorship network (threshold of collaboration ≥ 10 co-authored works) revealed a giant component of 161 researchers, containing 6 highly cohesive sub-components.ConclusionsOur study reveals the existence of a growing research community in which collaboration is increasingly important. We can highlight an essential feature associated with scientific collaboration: multi-authored papers, with growing numbers of collaborators contributing to them, are becoming more and more common, therefore the formation of research groups of increasing depth (specialization) and breadth (multidisciplinarity) is now a cornerstone of research success.

A multimedia version of Piers-Harris Children's Self-Concept Scale 2 (Piers-Harris 2) was created with audio and cartoon animation to facilitate the measurement of self-concept among younger children. This study aimed to assess the psychometric qualities of the computer version of Piers-Harris 2 scores, examine its score equivalence with the paper-and-pencil version, and survey the respondent preference of the two versions. Two hundred and forty eight Taiwanese students from the first to fourth grade were recruited. In regard to the psychometric properties, high internal consistency (α = .91) was found for the total score of multimedia Piers-Harris 2. High interscale correlations (.77 to .83) of the multimedia Piers-Harris 2 scores and the results of confirmatory factor analysis suggested the multimedia Piers-Harris 2 contained good structural characteristics. The scores of the multimedia Piers-Harris 2 also had significant correlations with the scores of the Elementary School Children's Self Concept Scale. The equality of convergence and criterion-related validities of Piers-Harris 2 scores for the multimedia and paper-and-pencil versions and the results of ICCs between the scores of the multimedia and paper-and-pencil Piers-Harris 2 suggested their high level of equivalence. Participants showed more positive attitudes towards the multimedia version.

We implemented three recently proposed approaches to the identification of overlapping and hierarchical substructures in graphs and applied the corresponding algorithms to a network of 492 information-science papers coupled via their cited sources. The thematic substructures obtained and overlaps produced by the three hierarchical cluster algorithms were compared to a content-based categorisation, which we based on the interpretation of titles and keywords. We defined sets of papers dealing with three topics located on different levels of aggregation: h-index, webometrics, and bibliometrics. We identified these topics with branches in the dendrograms produced by the three cluster algorithms and compared the overlapping topics they detected with one another and with the three pre-defined paper sets. We discuss the advantages and drawbacks of applying the three approaches to paper networks in research fields., Comment: 18 pages, 9 figures

Background In the context of a randomized controlled trial (RCT) on HIV testing in the emergency department (ED) setting, we evaluated preferences for survey modality and data quality arising from each modality. Methods Enrolled participants were offered the choice of answering a survey via audio computer assisted self-interview (ACASI) or pen and paper self-administered questionnaire (SAQ). We evaluated factors influencing choice of survey modality. We defined unusable data for a particular survey domain as answering fewer than 75% of the questions in the domain. We then compared ACASI and SAQ with respect to unusable data for domains that address sensitive topics. Results Of 758 enrolled ED patients, 218 (29%) chose ACASI, 343 chose SAQ (45%) and 197 (26%) opted not to complete either. Results of the log-binomial regression indicated that older (RR = 1.08 per decade) and less educated participants (RR = 1.25) were more likely to choose SAQ over ACASI. ACASI yielded substantially less unusable data than SAQ. Conclusions In the ED setting there may be a tradeoff between increased participation with SAQ versus better data quality with ACASI. Future studies of novel approaches to maximize the use of ACASI in the ED setting are needed.

Since the innovation of our new half-piece elastometric respirator, this type of filtering facepiece respirator (FFR) has been used widely in Thailand. Decontamination methods including ultraviolet C (UVC) germicidal irradiation and 70% alcohol have been implemented to decontaminate these respirators. We then examined the inactivation potential of different decontamination processes on porcine epidemic diarrhea virus (PEDV) and numerous bacterial strains, most of which were skin-derived. To enable rigorous integrity of the masks after repeated decontamination processes, fit tests by the Bitrex test, tensile strength and elongation at break were also evaluated. Our results showed that UVC irradiation at a dose of 3 J/cm2 can eradicate bacteria after 60 min and viruses after 10 min. No fungi were found on the mask surface before decontamination. The good fit test results, tensile strength and elongation at break were still maintained after multiple cycles of decontamination. No evidence of physical degradation was found by gross visual inspection. Alcohol (70%) is also an easy and effective way to eradicate microorganisms on respirators. As the current pandemic is expected to continue for months to years, the need to supply adequate reserves of personnel protective equipment (PPE) and develop effective PPE reprocessing methods is crucial. Our studies demonstrated that the novel silicone mask can be safely reprocessed and decontaminated for many cycles by UVC irradiation, which will help ameliorate the shortage of important protective devices in the COVID-19 pandemic era.

The response to the COVID-19 epidemic is generating severe shortages of personal protective equipment around the world. In particular, the supply of N95 respirator masks has become severely depleted, with supplies having to be rationed and health care workers having to use masks for prolonged periods in many countries. We sought to test the ability of 7 different decontamination methods: autoclave treatment, ethylene oxide gassing (ETO), low temperature hydrogen peroxide gas plasma (LT-HPGP) treatment, vaporous hydrogen peroxide (VHP) exposure, peracetic acid dry fogging (PAF), ultraviolet C irradiation (UVCI) and moist heat (MH) treatment to decontaminate a variety of different N95 masks following experimental contamination with SARS-CoV-2 or vesicular stomatitis virus as a surrogate. In addition, we sought to determine whether masks would tolerate repeated cycles of decontamination while maintaining structural and functional integrity. All methods except for UVCI were effective in total elimination of viable virus from treated masks. We found that all respirator masks tolerated at least one cycle of all treatment modalities without structural or functional deterioration as assessed by fit testing; filtration efficiency testing results were mostly similar except that a single cycle of LT-HPGP was associated with failures in 3 of 6 masks assessed. VHP, PAF, UVCI, and MH were associated with preserved mask integrity to a minimum of 10 cycles by both fit and filtration testing. A similar result was shown with ethylene oxide gassing to the maximum 3 cycles tested. Pleated, layered non-woven fabric N95 masks retained integrity in fit testing for at least 10 cycles of autoclaving but the molded N95 masks failed after 1 cycle; filtration testing however was intact to 5 cycles for all masks. The successful application of autoclaving for layered, pleated masks may be of particular use to institutions globally due to the virtually universal accessibility of autoclaves in health care settings. Given the ability to modify widely available heating cabinets on hospital wards in well-resourced settings, the application of moist heat may allow local processing of N95 masks.

Honey bees (genusApis)are well known for the impressive suite of nest defenses they have evolved to protect their abundant stockpiles of food and the large colonies they sustain. In Asia, honey bees have evolved under tremendous predatory pressure from social wasps in the genusVespa, the most formidable of which are the giant hornets that attack colonies in groups, kill adult defenders, and prey on brood. We document for the first time an extraordinary collective defense used byApis ceranaagainst the giant hornetVespa soror. In response to attack byV.soror,A.ceranaworkers foraged for and applied spots of animal feces around their nest entrances. Fecal spotting increased after colonies were exposed either to naturally occurring attacks or to chemicals that scout hornets use to target colonies for mass attack. Spotting continued for days after attacks ceased and occurred in response toV.soror, which frequently landed at and chewed on entrances to breach nests, but notVespa velutina, a smaller hornet that rarely landed at entrances. Moderate to heavy fecal spotting suppressed attempts byV.sororto penetrate nests by lowering the incidence of multiple-hornet attacks and substantially reducing the likelihood of them approaching and chewing on entrances. We argue thatA.ceranaforages for animal feces because it has properties that repel this deadly predator from nest entrances, providing the first report of tool use by honey bees and the first evidence that they forage for solids that are not derived from plants. Our study describes a remarkable weapon in the already sophisticated portfolio of defenses that honey bees have evolved in response to the predatory threats they face. It also highlights the strong selective pressure honey bees will encounter if giant hornets, recently detected in western North America, become established.

In recent years, spread of invasive alien plant species (IAPS) has been a major concern in Nepal. One such IAPS is Ageratum houstonianum, an Asteraceae, that is a prolific seed producer and difficult-to-control in farmland and various ecological regions causing crop yield and biodiversity losses. However, very little information is available on the germination biology and ecology of this species. Therefore, experiments were conducted to assess the effect of water stress, pH level, and light requirement on seed germination, and the effect of seed burial depth on seedling emergence. Water stress was simulated by polyethylene glycol solutions ranging from 0-5.56 MPa and pH solutions ranging from 4 to 9 were prepared using hydrochloric acid and sodium hydroxide. Germination tests were conducted in petri dishes lined with filter paper and placed in a controlled environment chamber set at 20° C. Light requirement comparisons were made by having petri dishes wrapped with aluminum foil or left unwrapped. Seedling emergence was evaluated by placing seeds at depths ranging from 0 to 20 mm in the soil. Results indicated that this species was moderately drought-tolerant because germination ceased beyond 0.51 MPa. Greater germination occurred at neutral to acidic than at alkaline pH levels. The seeds were positively photoblastic because no germination occurred under dark condition. No seedlings emerged from seeds placed more than 2 mm deep in the soil, indicating that this is a primarily surface germinating species. These findings will help predict future invasions and in development of management strategies for this IAPS.

The safety of highly aggregated tourist crowds is a challenging and important issue. This paper not only provided a comprehensive analysis of the accidents of highly aggregated tourist crowds but also determined the occurrence mechanism and coping paths. Based on the analysis of multiple cases, we found that the variable status of highly aggregated tourist crowds was the result of the interaction of three main elements: multisource pressure, state mutations and management responses. A series of factors interact and result in accidents, and the lack of a management response or a low-quality management response is the root cause of such accidents. A high-quality management response is a basic safety precaution for highly aggregated tourist crowds. Therefore, forming a virtuous circle of multisource pressure, state mutations and management responses is an effective path for coping with accidents.

Moving Bed Biofilm Reactors (MBBRs) can efficiently treat wastewater by incorporating suspended biocarriers that provide attachment surfaces for active microorganisms. The performance of MBBRs for wastewater treatment is, among other factors, contingent upon the characteristics of the surface area of the biocarriers. Thus, novel biocarrier topology designs can potentially increase MBBR performance in a significant manner. The goal of this work is to assess the performance of 3-D-printed biofilter media biocarriers with varying surface area designs for use in nitrifying MBBRs for wastewater treatment. Mathematical models, rendering, and 3D printing were used to design and fabricate gyroid-shaped biocarriers with a high degree of complexity at three different levels of specific surface area (SSA), generally providing greater specific surface areas than currently available commercial designs. The biocarriers were inoculated with a nitrifying bacteria community, and tested in a series of batch reactors for ammonia conversion to nitrate, in three different experimental configurations: constant fill ratio, constant total surface area, and constant biocarrier media count. Results showed that large and medium SSA gyroid biocarriers delivered the best ammonia conversion performance of all designs, and significantly better than that of a standard commercial design. The percentage of ammonia nitrogen conversion at 8 hours for the best performing biocarrier design was: 99.33% (large SSA gyroid, constant fill ratio), 94.74% (medium SSA gyroid, constant total surface area), and 92.73% (large SSA gyroid, constant biocarrier media count). Additionally, it is shown that the ammonia conversion performance was correlated to the specific surface area of the biocarrier, with the greatest rates of ammonia conversion (99.33%) and nitrate production (2.7 mg/L) for manufactured gyroid biocarriers with a specific surface area greater than 1980.5 m2/m3. The results suggest that the performance of commercial MBBRs for wastewater treatment can be greatly improved by manipulation of media design through topology optimization.

When clothes are worn and washed, they emit fibres into the ecosystem via discharges of sewage that have been linked to the global dispersion of clothing fibres. Facilities that treat sewage divert some fibres from sewage effluent to sludge, but no current methods of filtration eliminate their environmental release. While filters for washing-machines are sold to consumers with the argument they will reduce the emissions of fibres from clothes to the environment, there is insufficient scientific peer-reviewed evidence assessing their ability to retain fibres from washed clothes and reduce environmental contamination. To improve our understanding and develop more realistic methods to assess the efficiency of filters, we washed replicate cotton and polyester garments in replicate domestic front-loaded washing-machines with and without replicate filters (micro- and milli-meter-sized pores), and then quantified the masses of the fibres retained by the filters and those released in the effluent. Here we show micrometer-sized filters significantly reduced the mass of cotton by 67% (F-2,F-6= 11.69, P

The self-cleaning screen filter is one of the most common types used in drip irrigation systems. Backwashing pressure difference and backwashing time for two screen filters with one geometry and two different screens (178 μm and 124 μm) using two water qualities (tap water and sand-water mixture) were studied in a total of 88 runs (42 runs for tap water, 22 and 24 filtration cycles for sand-water mixture and backwashing, respectively). The backwashing pressure difference and backwashing time were calculated using the experimental data, and the results were largely in the range of measured values. Three constraint conditions (flowrate, sand condition and filtration time) of backwashing pressure difference were analysed, and the optimal values of backwashing pressure difference were given as 60.0 and 70.0 kPa for 178 μm and 124 μm filters, respectively. The backwashing time of the screen filter should be an optimal value that ensures that the pressure difference between the internal and external surfaces of the screen decreased to the initial value, and the sand concentration of the backwashed outlet decreased to a small, stable value. Based on the results of the backwashing experiment and prototype observation, the optimal backwashing time was given as 30 to 45 s for both screen filters.

Assimilable organic carbon (AOC) is known to correlate with microbial growth, which can consequently degrade drinking water quality. Despite this, there is no standardised AOC test that can be applied to drinking water distribution systems (DWDS). Herein we report the development of a quick, robust AOC that incorporates known strains Pseudomonas fluorescens strain P-17 and Spirillum strain NOX, a higher inoculum volume and enumeration using flow cytometry to generate a quicker (total test time reduced from 14 to 8 days), robust method. We apply the developed AOC test to twenty drinking water treatment works (WTW) to validate the method reproducibility and resolution across a wide range of AOC concentrations. Subsequently, AOC was quantified at 32 sample points, over four DWDS, for a year in order to identify sinks and sources of AOC in operative networks. Application of the developed AOC protocol provided a previously unavailable insight and novel evidence of pipes and service reservoirs exhibiting different AOC and regrowth behaviour. Observed correlations between AOC and microbial growth highlight the importance of monitoring AOC as an integral part of managing drinking water quality at the consumers tap.

The current technologies of algal biofuels production and wastewater treatment (e.g., aerobic) process are still in question, due to the significant amount of fresh water and nutrients requirements for microalgae cultivation, and negative energy balance in both processes, especially when considered in the context of developing counties around the world. In this research, a simplistic sustainable approach of algal biofuels production from wastewater was proposed using a Hybrid Anaerobic Baffled Reactor (HABR) and Photobioreactor (PBR) system. The study suggests that the HABR was capable of removing most of the organic and solid (>90% COD and TSS removal) from wastewater, and produced a healthy feedstock (high N: P = 3:1) for microalgae cultivation in PBRs for biofuels production. A co-culture of Chlorella vulgaris, Chlorella sorokiniana, and Scenedesmus simris002 showed high lipid content up to 44.1%; and the dominant FAMEs composition (C16-C18) of 87.9% in produced biofuels. Perhaps, this proposed low-cost technological approach (e.g., HABR-PBR system) would connect the currently broken link of sustainable bioenergy generation and wastewater treatment pathway for developing countries.

The environmental DNA (eDNA) method is a detection technique that is rapidly gaining credibility as a sensitive tool useful in the surveillance and monitoring of invasive and threatened species. Because eDNA analysis often deals with small quantities of short and degraded DNA fragments, methods that maximize eDNA recovery are required to increase detectability. In this study, we performed experiments at different stages of the eDNA analysis to show which combinations of methods give the best recovery rate for eDNA. Using Oriental weatherloach (Misgurnus anguillicaudatus) as a study species, we show that various combinations of DNA capture, preservation and extraction methods can significantly affect DNA yield. Filtration using cellulose nitrate filter paper preserved in ethanol or stored in a -20°C freezer and extracted with the Qiagen DNeasy kit outperformed other combinations in terms of cost and efficiency of DNA recovery. Our results support the recommendation to filter water samples within 24hours but if this is not possible, our results suggest that refrigeration may be a better option than freezing for short-term storage (i.e., 3-5 days). This information is useful in designing eDNA detection of low-density invasive or threatened species, where small variations in DNA recovery can signify the difference between detection success or failure.

Research Article False banana /Ensete ventricosum [Welw.] Cheesman/ is exploited as a food crop in Ethiopia where it represents an important staple food. The plant is harvested and large amounts of biomass residues are originated, mainly from the pseudo stem (i.e., fiber bundles obtained from the leaf sheaths after being scrapped to produce starchy food) and the inflorescence stalk. These materials were studied in relation to their summative chemical composition, composition of lignin, lipophilic and polar extracts. Moreover, their structural characteristics, in view of their valorization, were scrutinized. The analytical studies were performed with the aid of FTIR, GC/MS, Py-GC/MS and SEM. The fiber bundles are aggregates of mainly long and slender fibers with low ash, extractives and lignin contents (3.8%. 4.4% and 10.5% respectively) and high holocellulose and α-cellulose contents (87.5% and 59.6% respectively). The hemicelluloses in the fibers are mostly highly acetylated xylans and the lignin is of the H-type (H:G:S, 1:0.7:0.8). This lignin composition is in line with the FTIR peaks at 1670 cm-1 and 1250 cm-1.The inflorescence stalk has high ash content (12.3% in the main stalk and 24.6% in fines) with a major proportion of potassium, high extractives (25.9%), and low lignin and α-cellulose contents (5.8% and 17.9% respectively). The stalk includes numerous starch granules in the cellular structure with the predominant presence of parenchyma. The potential valorization routes for these materials are clearly different. The fiber bundles could be used as a fiber source for paper pulp production with the possibility of a prior hemicelluloses removal while the inflorescence stalk has nutritional value for food and fodder. Furthermore, it can also be used for sugar fermentation products info:eu-repo/semantics/publishedVersion