Search

This paper aims to optimize a desirable fare structure for the public transit service along a bus-subway corridor with the consideration of those factors related to equity in trip, including travel distance and comfort level. The travel distance factor is represented by the distance-based fare strategy, which is an existing differential strategy. The comfort level one is considered in the area-based fare strategy which is a new differential strategy defined in this paper. Both factors are referred to by the combined fare strategy which is composed of distance-based and area-based fare strategies. The flat fare strategy is applied to determine a reference level of social welfare and obtain the general passenger flow along transit lines, which is used to divide areas or zones along the corridor. This problem is formulated as a bi-level program, of which the upper level maximizes the social welfare and the lower level capturing traveler choice behavior is a variable-demand stochastic user equilibrium assignment model. A genetic algorithm is applied to solve the bi-level program while the method of successive averages is adopted to solve the lower-level model. A series of numerical experiments are carried out to illustrate the performance of the models and solution methods. Numerical results indicate that all three differential fare strategies play a better role in enhancing the social welfare than the flat fare strategy and that the fare structure under the combined fare strategy generates the highest social welfare and the largest resulting passenger demand, which implies that the more equity factors a differential fare strategy involves the more desirable fare structure the strategy has. [ABSTRACT FROM AUTHOR]

Aiming to solve the safety problems of high-speed railway operation and management, one new method is urgently needed to construct on the basis of the rough set theory and the uncertainty measurement theory. The method should carefully consider every factor of high-speed railway operation that realizes the measurement indexes of its safety operation. After analyzing the factors that influence high-speed railway safety operation in detail, a rough measurement model is finally constructed to describe the operation process. Based on the above considerations, this paper redistricts the safety influence factors of high-speed railway operation as 16 measurement indexes which include staff index, vehicle index, equipment index and environment. And the paper also provides another reasonable and effective theoretical method to solve the safety problems of multiple attribute measurement in high-speed railway operation. As while as analyzing the operation data of 10 pivotal railway lines in China, this paper respectively uses the rough set-based measurement model and value function model (one model for calculating the safety value) for calculating the operation safety value. The calculation result shows that the curve of safety value with the proposed method has smaller error and greater stability than the value function method’s, which verifies the feasibility and effectiveness. [ABSTRACT FROM AUTHOR]

Although studies have increasingly linked air pollution to specific health outcomes, less well understood is how public perceptions of air quality respond to changing pollutant levels. The growing availability of air pollution measurements and the proliferation of social media provide an opportunity to gauge public discussion of air quality conditions. In this paper, we consider particulate matter (PM) measurements from four Chinese megacities (Beijing, Shanghai, Guangzhou, and Chengdu) together with 112 million posts on Weibo (a popular Chinese microblogging system) from corresponding days in 2011–2013 to identify terms whose frequency was most correlated with PM levels. These correlations are used to construct an Air Discussion Index (ADI) for estimating daily PM based on the content of Weibo posts. In Beijing, the Chinese city with the most PM as measured by U.S. Embassy monitor stations, we found a strong correlation (R = 0.88) between the ADI and measured PM. In other Chinese cities with lower pollution levels, the correlation was weaker. Nonetheless, our results show that social media may be a useful proxy measurement for pollution, particularly when traditional measurement stations are unavailable, censored or misreported. [ABSTRACT FROM AUTHOR]

Circuity, defined as the ratio of the shortest network distance to the Euclidean distance between one origin–destination (O-D) pair, can be adopted as a helpful evaluation method of indirect degrees of train paths. In this paper, the maximum circuity of the paths of operated trains is set to be the threshold value of the circuity of high-speed train paths. For the shortest paths of any node pairs, if their circuity is not higher than the threshold value, the paths can be regarded as the reasonable paths. With the consideration of a certain relative or absolute error, we cluster the reasonable paths on the basis of their inclusion relationship and the center path of each class represents a passenger transit corridor. We take the high-speed rail (HSR) network in China at the end of 2014 as an example, and obtain 51 passenger transit corridors, which are alternative sets of train paths. Furthermore, we analyze the circuity distribution of paths of all node pairs in the network. We find that the high circuity of train paths can be decreased with the construction of a high-speed railway line, which indicates that the structure of the HSR network in China tends to be more complete and the HSR network can make the Chinese railway network more efficient. [ABSTRACT FROM AUTHOR]

Today, China is facing a very serious issue of Air Pollution due to its dreadful impact on the human health as well as the environment. The urban cities in China are the most affected due to their rapid industrial and economic growth. Therefore, it is of extreme importance to come up with new, better and more reliable forecasting models to accurately predict the air quality. This paper selected Beijing, Tianjin and Shijiazhuang as three cities from the Jingjinji Region for the study to come up with a new model of collaborative forecasting using Support Vector Regression (SVR) for Urban Air Quality Index (AQI) prediction in China. The present study is aimed to improve the forecasting results by minimizing the prediction error of present machine learning algorithms by taking into account multiple city multi-dimensional air quality information and weather conditions as input. The results show that there is a decrease in MAPE in case of multiple city multi-dimensional regression when there is a strong interaction and correlation of the air quality characteristic attributes with AQI. Also, the geographical location is found to play a significant role in Beijing, Tianjin and Shijiazhuang AQI prediction. [ABSTRACT FROM AUTHOR]

As a sustainable transportation mode, high-speed railway (HSR) has become an efficient way to meet the huge travel demand. However, due to the high acquisition and maintenance cost, it is impossible to build enough infrastructure and purchase enough train-sets. Great efforts are required to improve the transport capability of HSR. The utilization efficiency of train-sets (carrying tools of HSR) is one of the most important factors of the transport capacity of HSR. In order to enhance the utilization efficiency of the train-sets, this paper proposed a train-set circulation optimization model to minimize the total connection time. An innovative two-stage approach which contains segments generation and segments combination was designed to solve this model. In order to verify the feasibility of the proposed approach, an experiment was carried out in the Beijing-Tianjin passenger dedicated line, to fulfill a 174 trips train diagram. The model results showed that compared with the traditional Ant Colony Algorithm (ACA), the utilization efficiency of train-sets can be increased from 43.4% (ACA) to 46.9% (Two-Stage), and 1 train-set can be saved up to fulfill the same transportation tasks. The approach proposed in the study is faster and more stable than the traditional ones, by using which, the HSR staff can draw up the train-sets circulation plan more quickly and the utilization efficiency of the HSR system is also improved. [ABSTRACT FROM AUTHOR]

Estimating gross primary production (GPP) and net primary production (NPP) are significant important in studying carbon cycles. Using models driven by multi-source and multi-scale data is a promising approach to estimate GPP and NPP at regional and global scales. With a focus on data that are openly accessible, this paper presents a GPP and NPP model driven by remotely sensed data and meteorological data with spatial resolutions varying from 30 m to 0.25 degree and temporal resolutions ranging from 3 hours to 1 month, by integrating remote sensing techniques and eco-physiological process theories. Our model is also designed as part of the Multi-source data Synergized Quantitative (MuSyQ) Remote Sensing Production System. In the presented MuSyQ-NPP algorithm, daily GPP for a 10-day period was calculated as a product of incident photosynthetically active radiation (PAR) and its fraction absorbed by vegetation (FPAR) using a light use efficiency (LUE) model. The autotrophic respiration (Ra) was determined using eco-physiological process theories and the daily NPP was obtained as the balance between GPP and Ra. To test its feasibility at regional scales, our model was performed in an arid and semi-arid region of Heihe River Basin, China to generate daily GPP and NPP during the growing season of 2012. The results indicated that both GPP and NPP exhibit clear spatial and temporal patterns in their distribution over Heihe River Basin during the growing season due to the temperature, water and solar influx conditions. After validated against ground-based measurements, MODIS GPP product (MOD17A2H) and results reported in recent literature, we found the MuSyQ-NPP algorithm could yield an RMSE of 2.973 gC m-2 d-1 and an R of 0.842 when compared with ground-based GPP while an RMSE of 8.010 gC m-2 d-1 and an R of 0.682 can be achieved for MODIS GPP, the estimated NPP values were also well within the range of previous literature, which proved the reliability of our modelling results. This research suggested that the utilization of multi-source data with various scales would help to the establishment of an appropriate model for calculating GPP and NPP at regional scales with relatively high spatial and temporal resolution. [ABSTRACT FROM AUTHOR]

In this work we introduce a system pipeline for the analysis of earth’s electromagnetic field that is used to analyse precursors to earthquakes. Data gathered by the Swarm satellites are used to present the utility of our system. Our objective is to provide a streamlined method to analyze electromagnetic data over a region and investigate the relationship of precursory signals to seismic events. The process follows three distinct stages: data extraction, data pre-processing and anomaly detection. The first stage consists of the region selection and data extraction. The second stage consists of four different pre-processing methods that address the data sparsity problem and the cause of artificial anomalies. The last stage is the Anomaly Detection (AD) of the Swarm satellite data, over the investigated region. The different methods that are implemented are known to perform well in the field of AD. Following the presentation of our system, a case study is described where the seismic event of 6.2 Mw is in Ludian, China and occurred on 3rd August 2014. The event is used to present the usefulness of our approach and pinpoint some critical problems regarding satellite data that were identified. [ABSTRACT FROM AUTHOR]

We investigate the economic hubs and authorities of the world trade network (WTN) from to , an era of rapid economic globalization. Using a well-defined weighted hyperlink-induced topic search (HITS) algorithm, we can calculate the values of the weighted HITS hub and authority for each country in a conjugate way. In the context of the WTN, authority values are large for countries with significant imports from large hub countries, and hub values are large for countries with significant exports to high-authority countries. The United States was the largest economic authority in the WTN from to . The authority value of the United States has declined since , and China has now become the largest hub in the WTN. At the same time, China's authority value has grown as China is transforming itself from the “factory of the world” to the “market of the world.” European countries show a tendency to trade mostly within the European Union, which has decreased Europe's hub and authority values. Japan's authority value has increased slowly, while its hub value has declined. These changes are consistent with Japan's transition from being an export-driven economy in its high economic growth era in the latter half of the twentieth century to being a more mature, economically balanced nation. [ABSTRACT FROM AUTHOR]