Search

This paper presents a dual-core two-parameter optical fiber sensor based on the surface plasmonic resonance (SPR) effect. It is analyzed by the finite element method. The proposed sensor is a dual-channel structure designed with photonic crystal fiber (PCF) as the base material: one channel is coated with a gold film to measure the refractive index (RI) of the solution to be measured, and the other channel is coated with a gold film and polydimethylsiloxane to measure the temperature of the solution to be measured. The exposed microslot structure on both sides reduces the complexity of sensing measurements. The results show that the maximum RI sensitivity of the sensor is 19,900 nm/RIU, and the maximum sensitivity to temperature is 8.7 nm/℃. This work is conducive to realizing a PCF sensor with high sensitivity, large measurement range, real-time monitoring, and easy preparation. As a result, the sensor is expected to be widely used in fields such as biology and chemicals. [ABSTRACT FROM AUTHOR]

Surface plasmon resonance (SPR) sensing methods enable highly sensitive, fast response, and label-free analysis of biomolecular interactions. For SPR sensors, sensitivity and full width at half maximum (FWHM) are two incompatible performance parameters. We propose a refractive index (RI) sensor using a dual-core photonic crystal fiber (PCF) and SPR effects to achieve high sensitivity and a narrow FWHM simultaneously. The air holes of the sensor appear in a hexagonal arrangement, and polishing technology introduces two polishing planes into the cladding. A gold film is deposited on one side of the polished plane to form a highly sensitive RI sensing channel. Five gold nanowires are deposited on the other side of the polished plane to form a RI sensing channel with a narrow FWHM. We analyzed and optimized its structural parameters using the finite element method and determined the optimal structural parameters. The numerical results demonstrate that the maximum sensitivity of the sensor is 21,000 nm/RIU with the narrowest FWHM of 31 nm. Therefore, measuring the refractive index simultaneously with two sensing channels increases the detection accuracy of the measurement. In addition, the findings further indicate that variations in structural parameters do not significantly impact the sensing performance of the sensor, which makes the production of the sensor relatively simple. In conclusion, our work provides a new research method for realizing high sensitivity and a narrow FWHM simultaneously. [ABSTRACT FROM AUTHOR]