Search

In this paper, a tomography approach aiming at reconstructing a phase-space structure is proposed. For the phase-space resolved diagnostic system, a signal must be decomposed in real-space, velocity-space, and time; therefore, it is challenging to obtain a sufficiently high signal intensity in a single detector bin. To overcome this difficulty, three different sets of data having different integration directions in real-space, velocity-space, and time are simultaneously used, and a reconstruction of the original structure in the phase-space is attempted by a tomographic manner. The proposed method is demonstrated using a synthetic dataset in the actual diagnostic setup in the Large Helical Device. Time evolution of a phase-space perturbation induced by the Landau damping, which is caused by energetic particle-driven magnetohydrodynamic bursts, is successfully reconstructed by this method. Robustness against realistic diagnostic noise is also presented.

A heating source with off-axis electron cyclotron heating (ECH) alone produced a plasma with a quasi-steady-state hollow electron-temperature profile in the Large Helical Device. The clear formation of this quasi-steady-state hollow electron-temperature profile can be explained by adding the outward heat convection term to the diffusion term, as a simple model to describe the electron heat flux, using the energy conservation equation. In addition, we directly observed the non-locality of the non-diffusive (convective) contribution in transient electron thermal transport in the condition that power-modulated on-axis ECH was applied to the plasma sustained by off-axis ECH. The experimentally evaluated flux-gradient relation shows two different positive values of the electron heat flux at zero temperature gradient by going back and forth between positive and negative temperature gradient regions in the transport hysteresis phenomenon.

The experimentally optimized magnetic field configuration of the Large Helical Device [A. Iiyoshi et al., Nucl. Fusion 39, 1245 (1999)], where the magnetic axis is shifted inward by 15 cm from the early theoretical prediction, reveals 50% better global energy confinement than the prediction of the scaling law. This configuration has been investigated further from the viewpoints of high energy particle confinement and magnetohydrodynamic (MHD) stability. The confinement of high energy ions is improved as expected. The minority heating of ion cyclotron range of frequency was successful and the heating efficiency was improved by the inward shift. The confinement of passing particles by neutral beam injection was also improved under low magnetic field strength, and there could be obtained an almost steady high beta discharge up to 3% in volume average. This was a surprising result because the observed pressure gradient exceeded the Mercier unstable limit. The observed MHD activities became as high as beta but they did not grow enough to deteriorate the confinement of high energy ions or the performance of the bulk plasma, which was still 50% better than the scaling. According to these favorable results, better performance would be expected by increasing the heating power because the neoclassical transport can also be improved there.

Three-dimensional effects on plasma flows have been experimentally studied in the large helical device with 3D configurations. Spontaneous toroidal flow without net driving force using the combination of perpendicular neutral beam injection (NBI) heating and balanced tangential NBI heating has been investigated with two magnetic configurations. Co- and counter-directed spontaneous flows have been observed depending on the collisionality. Toroidal flow shear changes the sign at 0.4

Extremely hollow profiles of impurities (denoted as “impurity hole”) are observed in the plasma with a steep gradient of the ion temperature after the formation of an internal transport barrier (ITB) in the ion temperature transport in the Large Helical Device [A. Iiyoshi et al., Nucl. Fusion 39, 1245 (1999)]. The radial profile of carbon becomes hollow during the ITB phase and the central carbon density keeps dropping and reaches 0.1%?0.3% of plasma density at the end of the ion ITB phase. The diffusion coefficient and the convective velocity of impurities are evaluated from the time evolution of carbon profiles assuming the diffusion and the convection velocity are constant in time after the formation of the ITB. The transport analysis gives a low diffusion of 0.1?0.2 m2/s and the outward convection velocity of ~1 m/s at half of the minor radius, which is in contrast to the tendency in tokamak plasmas for the impurity density to increase due to an inward convection and low diffusion in the ITB region. The outward convection is considered to be driven by turbulence because the sign of the convection velocity contradicts the neoclassical theory where a negative electric field and an inward convection are predicted.

High-ion-temperature (exceeding 5 keV) hydrogen plasmas have been successfully produced in the Large Helical Device [Iiyoshi et al., Nucl. Fusion 39, 1245 (1999); Motojima et al., Nucl. Fusion 47, S668 (2007)] with the ion heat confinement improvement in the core region. The experimental ion heat diffusivity at the core region is found to be almost independent of the ion temperature, T_i (even decreasing as T_i increases). The neoclassical (NC) ripple transport is suppressed by the ambipolar radial electric field, E_r (

Recent progress in the heating capability in the large helical device [O. Motojima et al., Phys. Plasmas 6, 1843 (1999)] has allowed the highest average beta value (4.1%) obtained in the helical devices, and enables exploration of magnetohydrodynamics (MHD) stability in this beta region. MHD activities in the periphery are found to become stable spontaneously from the inner region to the outer region when the averaged beta value exceeds a threshold, and then a flattening of the electron temperature profile is observed around the resonant surface. Such a flattening can be formed externally by producing an m/n=1/1 magnetic island, and the complete stabilization of the m/n=1/1 mode is demonstrated by the moderate island width. In addition, attempts to control peripheral plasmas are also performed by using a limiter and a local island divertor utilizing the m/n=1/1 island, to improve plasma confinement and, especially, to stabilize pressure-driven modes in the present study. The stabilization of peripheral MHD modes is obtained with both approaches, and this indicates that these are available to the production of higher-beta plasmas without edge MHD activities.