Search

The on-demand jetting of high-viscosity liquid has significant applications in fields such as electronic packaging and bioprinting. Conventional methods for high-viscosity liquid jetting often employ a needle propelling the liquid rapidly, which demands high precision in the manufacturing and assembly of the needle and nozzle, and can potentially damage biomaterials. In this study, a novel method utilizing jet tube impact for on-demand high-viscosity liquid jetting is proposed, leveraging the inherent inertia of the liquid to generate the pressure pulse necessary for on-demand jetting. This method reduces the precision requirements for the device, enables device simplification, and avoids harm to biomaterials. The feasibility of this approach for on-demand high-viscosity liquid jetting is validated through experiments, and by combining numerical simulations, the jetting mechanism is revealed and primary factors influencing jetting performance are investigated. It is found that the water hammer pressure wave induced by the liquid inertia during the sudden velocity change of the jet tube is the predominant driving force for jetting, and the peak pressure can exceed 1 MPa and the peak jet velocity can exceed 15 m/s. An increase in the jet tube impact velocity and an extension of the acceleration duration at the same impact velocity both lead to an increase in the pressure wave amplitude. In addition, a decrease in the liquid level height shortens the period of the pressure wave. These factors all have an influence on the jetting performance. This study provides a new insight and theoretical foundation for the on-demand high-viscosity liquid jetting. [ABSTRACT FROM AUTHOR]

Inkjet printing technology has played an irreplaceable role in life science, precision manufacturing, and other frontier fields in recent years. However, the further development of this technology is limited by the fact that its printing resolution is difficult to raise to a higher level. The emerging satellite droplet printing technology offers a new approach for inkjet printing to break through the bottleneck of printing resolution limitations. In this paper, a symmetrical satellite droplet printing strategy is proposed. The effects of the geometric parameters of the satellite droplet generating device, the physical properties of the ink, and the operating parameters on the liquid bridge breakup process and the size of the satellite droplet are systematically studied. The phase field method and adaptive mesh refinement strategy are applied to solve the two-dimensional symmetrical model. The results indicate that the length of the liquid bridge, the radius of the bridge, the viscosity of the ink, and the drainage velocity are all positively correlated with the satellite droplet size, while the surface tension coefficient has a negative correlation with the satellite droplet size. Furthermore, the three-phase contact line at the orifice end will slip toward the center if the initial radius of the liquid bridge is quite large. Based on these investigations and discussions, a corresponding effective working space for satellite droplet printing is obtained, which lays the foundation for the popularization and further development of satellite droplet printing technology. [ABSTRACT FROM AUTHOR]

The dynamics of bubbles near a liquid–liquid interface represent a complex multiphase problem with numerous potential applications. This paper utilizes pulsed laser-induced microbubbles at the liquid–liquid interface to achieve the multi-orifice ejection of liquid metal microdroplets that are challenging to achieve with traditional inkjet printing. The study combines the expansion and collapse processes of thermal bubbles at the two-phase liquid interface with the ejection process of liquid metal droplets, unveiling the underlying mechanisms of liquid metal droplet ejection. In this work, the influence of laser parameters on the behavior of thermal bubbles at the liquid–liquid interface and the double-peak pressure effect was investigated. The impact of laser parameters on the ejection behavior of liquid metal droplets was also examined, which provides theoretical support for the wide applications of bubble dynamics at the liquid–liquid interface in the field of liquid metal inkjet printing. [ABSTRACT FROM AUTHOR]