Search

Objective. To demonstrate that complete cone beam CT (CBCT) scans from both MV-energy and kV-energy LINAC sources can reduce metal artifacts in radiotherapy guidance, while maintaining standard-of-care x-ray doses levels. Approach. MV-CBCT and kV-CBCT scans are acquired at half normal dose. The impact of lowered dose on MV-CBCT data quality is mitigated by the use of a 4-layer MV-imager prototype and reduced LINAC energy settings (2.5 MV) to improve photon capture. Additionally, the MV-CBCT is used to determine the 3D position and pose of metal implants, which in turn is used to guide model-based poly-energetic correction and interleaving of the kV-CBCT and MV-CBCT data. Certain edge-preserving regularization steps incorporated into the model-based correction algorithm further reduce MV data noise. Main results. The method was tested in digital phantoms and a real pelvis phantom with large 2.5″ spherical inserts, emulating hip replacements of different materials. The proposed method demonstrated an appealing compromise between the high contrast of kV-CBCT and low artifact content of MV-CBCT. Contrast-to-noise improved 3-fold compared to MV-CBCT with a clinical 1-layer architecture at matched dose (37 mGy) and edge blur levels. Visual delineation of the bladder and prostate improved noteably over kV- or MV-CBCT alone. Significance. The proposed method demonstrates that a full MV-CBCT scan can be combined with kV-CBCT to reduce metal artifacts without resorting to complicated beam collimation strategies to limit the MV-CBCT dose contribution. Additionally, significant improvements in CNR can be achieved as compared to metal artifact reduction through current clinical MV-CBCT practices. [ABSTRACT FROM AUTHOR]

Objective. CBCTs in image-guided radiotherapy provide crucial anatomy information for patient setup and plan evaluation. Longitudinal CBCT image registration could quantify the inter-fractional anatomic changes, e.g. tumor shrinkage, and daily OAR variation throughout the course of treatment. The purpose of this study is to propose an unsupervised deep learning-based CBCT-CBCT deformable image registration which enables quantitative anatomic variation analysis. Approach. The proposed deformable registration workflow consists of training and inference stages that share the same feed-forward path through a spatial transformation-based network (STN). The STN consists of a global generative adversarial network (GlobalGAN) and a local GAN (LocalGAN) to predict the coarse- and fine-scale motions, respectively. The network was trained by minimizing the image similarity loss and the deformable vector field (DVF) regularization loss without the supervision of ground truth DVFs. During the inference stage, patches of local DVF were predicted by the trained LocalGAN and fused to form a whole-image DVF. The local whole-image DVF was subsequently combined with the GlobalGAN generated DVF to obtain the final DVF. The proposed method was evaluated using 100 fractional CBCTs from 20 abdominal cancer patients in the experiments and 105 fractional CBCTs from a cohort of 21 different abdominal cancer patients in a holdout test. Main Results. Qualitatively, the registration results show good alignment between the deformed CBCT images and the target CBCT image. Quantitatively, the average target registration error calculated on the fiducial markers and manually identified landmarks was 1.91 ± 1.18 mm. The average mean absolute error, normalized cross correlation between the deformed CBCT and target CBCT were 33.42 ± 7.48 HU, 0.94 ± 0.04, respectively. Significance. In summary, an unsupervised deep learning-based CBCT-CBCT registration method is proposed and its feasibility and performance in fractionated image-guided radiotherapy is investigated. This promising registration method could provide fast and accurate longitudinal CBCT alignment to facilitate inter-fractional anatomic changes analysis and prediction. [ABSTRACT FROM AUTHOR]

Objective. In this study we developed an automatic method to predict tumour volume and shape in weeks 3 and 4 of radiotherapy (RT), using cone-beam computed tomography (CBCT) scans acquired up to week 2, allowing identification of large tumour changes. Approach. 240 non-small cell lung cancer (NSCLC) patients, treated with 55 Gy in 20 fractions, were collected. CBCTs were rigidly registered to the planning CT. Intensity values were extracted in each voxel of the planning target volume across all CBCT images from days 1, 2, 3, 7 and 14. For each patient and in each voxel, four regression models were fitted to voxel intensity; applying linear, Gaussian, quadratic and cubic methods. These models predicted the intensity value for each voxel in weeks 3 and 4, and the tumour volume found by thresholding. Each model was evaluated by computing the root mean square error in pixel value and structural similarity index metric (SSIM) for all patients. Finally, the sensitivity and specificity to predict a 30% change in volume were calculated for each model. Main results. The linear, Gaussian, quadratic and cubic models achieved a comparable similarity score, the average SSIM for all patients was 0.94, 0.94, 0.90, 0.83 in week 3, respectively. At week 3, a sensitivity of 84%, 53%, 90% and 88%, and specificity of 99%, 100%, 91% and 42% were observed for the linear, Gaussian, quadratic and cubic models respectively. Overall, the linear model performed best at predicting those patients that will benefit from RT adaptation. The linear model identified 21% and 23% of patients in our cohort with more than 30% tumour volume reduction to benefit from treatment adaptation in weeks 3 and 4 respectively. Significance. We have shown that it is feasible to predict the shape and volume of NSCLC tumours from routine CBCTs and effectively identify patients who will respond to treatment early. [ABSTRACT FROM AUTHOR]