Search

Metal oxides are a class of material of particular interest for catalytic purposes. Among them the iron oxide as a monolayer supported on gold, FeO/Au, stands out for its capability to promote the CO oxidation and the dissociation of O 2 and H 2 . In this work, we use density functional theory calculations to characterize interfacial properties of this heterostructure. We consider a FeO/Au realistic model system, managing to reproduce the moiré pattern experimentally found. Specific features of the high-symmetry domains of the moiré are identified, providing a robust ground for establishing a structure-activity relationship and guessing how the surface would behave in catalytic conditions. We also describe a strategy to model smaller systems representative of each high-symmetry domains of the moiré, which will be useful in the future to model catalytic reaction mechanisms.

In this paper, we study the magnetic and chemical properties of Fe/graphene vertically stacked ultrathin films by means of X-ray magnetic circular dichroism and X-ray photoelectron spectroscopy. We compare two systems: an iron layer deposited directly on top of the Pt(111) surface, and an intercalated Fe film sandwiched between graphene and Pt(111). The system composed of a submonolayer Fe deposited directly on Pt(111) maintains an out-of-plane easy magnetization axis, even if it has been covered by graphene that quenches effectively the magnetic orbital moment of Fe. However, when the Fe coverage is increased above 1 ML the easy magnetization axis flips in the in-plane direction.

Nitrogen doped tin(iv) oxide (SnO2) materials in the form of nanometric powders have been prepared by precipitation with ammonia. Their properties have been compared with those of undoped materials obtained in a similar way using various physical techniques such as photoelectron spectroscopies (XPS and UPS), UV-Vis-NIR spectroscopy and electron paramagnetic resonance (EPR). Nitrogen doping leads to the formation of various nitrogen containing species, the more relevant of which is a nitride-type ionic species, based on the substitution of a lattice oxygen atom with a nitrogen atom. This species exists in two forms, paramagnetic (hole centre, formally N(2-)) and diamagnetic (N(3-)). The mutual ratio of the two species varies according to the oxidation state of the material. The doped solid, like most of the semiconducting oxides, tends to lose oxygen forming oxygen vacancies upon annealing under vacuum and leaving an excess of electrons in the solid. The stoichiometry of the solid can thus be markedly changed depending on the external conditions. Excess electrons are present both as itinerant electrons in the conduction band and as Sn(ii) states lying close to the valence band maximum. The presence of nitride-type centres, which are low energy states located below the top of the valence band, decreases the energy cost for the formation of oxygen vacancies by O2 release from the lattice. This particular feature of the doped system represents a severe limit to the preparation of a p-type SnO2via nitrogen doping.

Composite materials of titania and graphitic carbon, and their optimized synthesis are highly interesting for application in sustainable energy conversion and storage. We report on planar C/TiO2 composite films that are prepared on a polycrystalline titanium substrate by carbothermal treatment of compact anodic TiO2 with acetylene. This thin film material allows for the study of functional properties of C/TiO2 as a function of chemical composition and structure. The chemical and structural properties of the composite on top of individual Ti substrate grains are examined by scanning photoelectron microscopy and micro-Raman spectroscopy. Through comparison of these data with electron backscatter diffraction, it is found that the amount of generated carbon and the grade of anodic film crystallinity correlate with the crystallographic orientation of the Ti substrate grains. On top of Ti grains with ∼(0001) orientations the anodic TiO2 exhibits the highest grade of crystallinity, and the composite contains the highest fraction of graphitic carbon compared to Ti grains with other orientations. This indirect effect of the Ti substrate grain orientation yields new insights into the activity of TiO2 towards the decomposition of carbon precursors.

Alloy nanoparticles are characterized by the combination of multiple interesting properties, which are attractive for technological and scientific purposes. A frontier topic of this field is nanoalloys with compositions not thermodynamically allowed at ordinary temperature and pressure (i.e. metastable), because they require out-of-equilibrium synthetic approaches. Recently, laser ablation synthesis in solution (LASiS) was successfully applied for the realization of metastable nanoalloys because of the fast kinetics of nanoparticle formation. However, the role played by the chemical environment on the final composition and structure of laser generated nanoalloys still has to be fully elucidated. Here, we investigated the influence of different synthetic conditions on the LASiS of metastable nanoalloys composed of Au and Fe, such as the use of water instead of ethanol, the bubbling of inert gases and the addition of a few vol% of H2O2 and H2O. The two elements showed different reactivity when LASiS was performed in water instead of ethanol, while minor effects were observed from bubbling pure gases such as N2, Ar and CO2 in the liquid solution. Moreover, the plasmonic response and the structure of the nanoalloys were sensibly modified by adding H2O2 to water. We also found that nanoparticle production is dramatically influenced just by adding 0.2% of H2O in ethanol. These results suggest that the formation of a cavitation bubble with long lifetime and large size during LASiS is useful for the preservation of the metastable alloy composition, whereas an oxidative environment hampers the formation of metastable alloy nanoparticles. Overall, by acting on the type of solvent and solutes, we were able to switch from a traditional synthetic approach for the composition of Au-Fe nanoalloys to one using a reactive environment, which gives unconventional structures such as metal@iron-oxide nanoshells and nanocrescents of oxide supported on metal nanospheres. These results expand the knowledge about the mechanism of the formation of nanoalloys using LASiS and show how to obtain multielement nanoparticles of enormous interest for nanomedicine, plasmonics, magneto-plasmonics and catalysis.

We have investigated by photoemission spectroscopy and scanning tunnelling microscopy what are the chemical and structural changes induced by nitrogen ion implantation (500 eV) on highly oriented pyrolytic graphite and how the defects induced by this process modify the growth and thermal stability of palladium nanoparticles, deposited in situ by physical vapour deposition. Since nitrogen derived defects are mostly buried below the surface, they are not accessible for a chemical interaction with metal nanoparticles; however, the amorphization induced by the ion beam in the outermost layers of the substrate beneficially affects the metal morphology, limiting the size of the nanoparticles and improving their thermal stability. The supported nanoparticles have been tested towards the oxygen reduction reaction indicating that the electrochemical activity does not depend significantly on the ion implantation, but mostly on the amount of palladium.

The essential role of O affinity in the directed assembly of size-selected Au and Fe nanoparticles (NPs) on a TiO(x)/Pt(111) ultrathin oxide phase, an effective template for size selected metal NP growth, is revealed through scanning tunneling microscopy and density-functional calculations. A weakly interacting element (Au) diffuses rapidly and gets trapped in the vacancy defects (picoholes) located inside parallel rows (troughs, spaced 1.44 nm apart) peculiar to the film structure, producing size-selected NPs arranged in regular linear arrays aligned along the troughs. In contrast, an element with greater O affinity (Fe) experiences higher diffusion barriers, and the growth is dominated by kinetic effects, with a less effective preferential nucleation and the appearance of irregular NP morphologies.

A combined use of low energy electron microscopy (LEEM) and microprobe LEED (micro-LEED) allows the in-situ observation of dynamical processes at the TiOx/Pt(111) interface. The transformations between different surface-stabilized phases are investigated in the case of room temperature TiOx reactive deposition with subsequent post-annealing. For a coverage of 0.6 MLeq, UHV annealing to 400 degrees C leads to the formation of the zigzag-like z-TiO1.33 layer. At higher temperatures a rotated z-TiO1.33 phase is observed, its lateral distribution being strongly influenced by surface morphology. Concurrently, the z-TiO1.33 layer partially transforms into a kagomé-like TiO1.5 structure. The resulting oxygen enrichment of the interface is interpreted by invoking Ti interdiffusion into the substrate. At a coverage of 0.45 MLeq, UHV annealing at 500 degrees C transforms the z-TiO1.33 layer into a different zigzag-like z'-TiO1.25 layer. Post-annealing in oxygen of the reduced phases or direct reactive deposition at high temperature both produce the rect-TiO2 stoichiometric phase, showing characteristic needle-like domains aligned according to the rect-TiO2 unit cell orientation.

We present an in-depth investigation of Au nanoparticles self-assembled on a zigzag-like TiO(x)/Pt(111) ultrathin polar film, whose structure is known in great detail. The peculiar pattern of defects (picoholes) templates a linear array of size-selected (ca. 1 nm) Au nanoparticles without disruption of the titania layer, as observed by scanning tunneling microscopy. Their structure and electronic properties have been investigated by several large-area spectroscopic tools, i.e. high-resolution core and valence level photoemission and angle-scanned and energy-scanned photoelectron diffraction. The comparison between experimental data and density functional theoretical calculations indicates that the Au atoms landing on the oxide film are rather mobile, and that the picoholes can act as effective trapping and nucleation centers for the growth of the Au nanoparticles. All the experimental results are in concord in indicating that the Au NPs are flat islands with a maximum thickness of 2-3 layers exposing the (111) surface.