Search

Auxeticity of materials improves several of their mechanical properties, especially shear, impact, and bending resistance. It also improves ability of materials to absorb impact energy as well as the overall stiffness of structures. In this research, authors examine synclastic panels made from novel wood‐based composites. The aim is to determine the force–displacement characteristics during uniaxial compression and obtain the stiffness of the panels. These data allow one to predict the behavior of a panel during two‐axial bending with different support scenarios. Finite element method (FEM) analysis is performed, with the use of model material, to determine the impact of varied facings thickness as well as different types of materials and core structures, on the stiffness of synclastic panels. It is demonstrated that proposed multilayer composites allow forming (technologically difficult) spherical shapes, without additional heat and pressure treatment. The type of an outer layer material strictly determines the usability and ease of two‐axial bending process. Presented composites are interesting materials, that can be adopted into the wood industry as a replacement for traditional materials, e.g., bent plywood. [ABSTRACT FROM AUTHOR]

In this paper, the dynamic behavior of a three-layered sandwich beam with a metal foam core is investigated. Outer layers of the sandwich beam are made of AlSi12 alloy and the core is metal porous foam made of AlSi12. Numerical analysis is made for different parameters of the core -- average damping loss factor, densities, Young modulus, and Poisson's ratio of core foam. The simulations are used to determine the mechanical impedance for a sandwich beam with the applied harmonic load. Numerical calculations are made with the use of finite element method. The results imply that the auxetic core of the composite beam can have a great impact on the dynamic behavior (mobility) of the system. Furthermore, it appears that there are ranges of frequencies in which the mobility of the system can be minimized by using the auxetic foam core. [ABSTRACT FROM AUTHOR]

The contact problem between two bodies: plate and semi-cylindrical bar is studied in this paper. The analysis concerns the contact pressure distribution along the contact region, as well as the deflection of the plate. Furthermore, the case of a composite plate covered with the auxetic layer is also considered. The influence of the Poisson's ratio of the layer on the behavior of the plate is studied. The contact pressure distribution along the contact area is analyzed using finite element analysis. [ABSTRACT FROM AUTHOR]

Helical arrangements are very common both in nature and in artificial structures. In this paper, an analysis of a prismatic composite bar is presented. The cross-sectional shape of the bar is described by a regular polygon. The composite is built of two homogeneous isotropic materials characterised by different Poisson's ratios one of which can be negative. Spatial distribution of materials in the composite is based on helical shape. Both materials are connected with the use of a transition zone of assumed width. The bar is subjected to torsional loading and its behavior is investigated by means of FEM method. Both material properties and the parameters of helical shape are investigated and the result of numerical analysis is presented. [ABSTRACT FROM AUTHOR]

Auxetics with negative Poisson's ratio (NPR) can expand dimensions along the direction perpendicular to the tensile direction, such as rigid rotation, reentrant and chiral structures, etc. The mechanical performances of chiral metastructures are closely related to internal defects and interactions between defects. In this paper, two types of irregular chiral structures with Gaussian dispersion of circular node positions and missing ligaments are designed, namely: anti‐tetrachiral metastructure and tetrachiral hybrid metastructure. These two types of chiral metastructures are characterized by node radius, ligament thickness, ligament length, the circular node center dispersion range, and missing ligament percentages. Effects of random node distribution range and cell wall missing percentage on the elastic modulus and Poisson's ratio of chiral metastructures are investigated through experimental tests and finite element (FE) simulation systematically. Through dimensionless analysis, it is found that ligament thickness has remarkable influence on the negative Poisson's ratio. Effect of missing ligament on the mechanical properties of the structure is greater than effect of random node center dispersion. With the increase of ligament missing percentage, the resultant modulus of chiral metastructures decreases, and the corresponding NPR increases. [ABSTRACT FROM AUTHOR]

An extensive investigation is carried out on the missing rib square grid structure using finite element simulations. This showed that, in the cases considered in this study, the type of deformation is primarily dependent on the ratio of the thickness of different ribs with the structure behaving like an anti-tetrachiral at particular ratios. The analysis also showed that the ability of the structure to deform predominantly through the bending of the ligament allows it to achieve much more negative values of the Poisson's ratio than previously reported. Confirmation of the numerical results is obtained through experimental methods involving the 3D printing of representative structures which are subsequently subjected to compression. [ABSTRACT FROM AUTHOR]

The dynamic mechanical responses of the ferroelastic materials under uniaxial straining and temperature cycling are studied via the Landau-type phase field model in two dimensions. The model may exhibit a single-well (doublewell) energy profile when temperature is greater (less) than the critical temperature. Effective negative stiffness in the vicinity of the temperature-induced solid-solid phase transformation is numerically demonstrated through monotonic uniaxial straining on a single-domain ferroelastic under temperature cycling around the Curie temperature. Under sinusoidal uniaxial straining, the effective Young's modulus and damping, as indicated by the enclosed area of the stress-strain curve, may be largely increased due to the phase transition. Our calculated responses here are consistent with experimental data reported in the literature, as well as theoretical results based on the composite theory with inclusions assumed to have negative modulus. No negative stiffness values are directly assigned in our phase field model as the underlying physics of the order parameters, i.e., spontaneous strains, provides effective negative stiffness into the systems. [ABSTRACT FROM AUTHOR]

A two phase, fibrous composite subjected to bending nonuniform load is studied in this article. The composite is built of two constituents: the matrix is built of conventional material characterised by constant positive Poisson's ratio, whereas the Poisson's ratio of fibres is changed from positive (common materials) to negative values (auxetics). The influence of the arrangement of fibres, the volume fraction of fibres' materials and the distribution of loading force is studied by means of FEM. The behaviour of the composite is investigated in order to determine if auxetic reinforcement improves rigidity and indentation resistance of the composite. The results obtained confirm that auxetics can be used in composites to decrease deformation in the direction of acting force. [ABSTRACT FROM AUTHOR]