Search

Suitable ex vivo models are required as predictive tools of oromucosal permeability between in vitro characterizations and in vivo studies in order to support the development of novel intraoral formulations. To counter a lack of clinical relevance and observed method heterogenicity, a standardized, controlled and physiologically relevant ex vivo permeation model was established. This model combined the Kerski diffusion cell, process automation, novel assays for tissue integrity and viability, and sensitive LC-MS/MS analysis. The study aimed to assess the effectiveness of the permeation model in the sublingual formulation development of cyclobenzaprine, a promising agent for the treatment of psychological disorders. A 4.68-fold enhancement was achieved through permeation model-led focused formulation development. Here, findings from the preformulation with regard to pH and microenvironment-modulating excipients proved supportive. Moreover, monitoring of drug metabolism during transmucosal permeation was incorporated into the model. In addition, it was feasible to assess the impact of dosage form alterations under stress conditions, with the detection of a 33.85% lower permeation due to salt disproportionation. Integrating the coherent processes of disintegration, dissolution, permeation, and metabolization within a physiological study design, the model enabled successful formulation development for cyclobenzaprine sublingual tablets and targeted development of patient-oriented drugs for the oral cavity.

Due to its numerous advantages, such as excellent drug accessibility, rapid absorption, and bypass of first-pass metabolism, the route of drug administration that involves crossing the oral mucosa is highly favored. As a result, there is significant interest in investigating the permeability of drugs through this region. The purpose of this review is to describe the various ex vivo and in vitro models used to study the permeability of conveyed and non-conveyed drugs through the oral mucosa, with a focus on the most effective models. Currently, there is a growing need for standardized models of this mucosa that can be used for developing new drug delivery systems. Oral Mucosa Equivalents (OMEs) may provide a promising future perspective as they are capable of overcoming limitations present in many existing models. [ABSTRACT FROM AUTHOR]

The greatest achievement in the advanced drug delivery field should be the optimization of non-invasive formulations for the delivery of high molecular weight compounds. Peptides, proteins, and other macromolecules can have poor membrane permeation, principally due to their large molecular weight. The aim of this work was to explore the possibility of administering fluorescently labeled dextrans (molecular weight 4–150 kDa) across the buccal mucosa. Permeation experiments across pig esophageal mucosa were carried out using fatty acids and bile salts as penetration enhancers. The data obtained show that it is possible to increase or promote the mucosa permeation of high molecular weight dextrans by using caprylic acid or sodium taurocholate as the chemical enhancers. With these enhancers, dextrans with molecular weight of 70 and 150 kDa, that in passive conditions did not permeate, could cross the mucosa in detectable amounts. FD-70 and FD-150 showed comparable permeability values, despite the molecular weight difference. The results obtained in the present work suggest that the buccal administration of high molecular weight compounds is feasible. [ABSTRACT FROM AUTHOR]

This work investigated the influence of liquid vehicles on the release, mucosal permeation and deposition of cannabidiol (CBD) from liquisolid systems. Various vehicles, including EtOH, nonvolatile low- and semi-polar solvents, and liquid surfactants, were investigated. The CBD solution was converted into free-flowing powder using carrier (microcrystalline cellulose) and coating materials (colloidal silica). A physical mixture of the CBD and carrier–coating materials was prepared as a control. The non-crystalline state of CBD in the liquisolid systems was confirmed using XRD, FTIR and SEM studies. The CBD liquisolid powder prepared with volatile and nonvolatile solvents had a better CBD release performance than the CBD formed as the surfactant-based and control powders. The liquisolid systems provided the CBD permeation flux through porcine esophageal mucosa ranging from 0.68 ± 0.11 to 13.68 ± 0.74 µg·cm−2·h−1, with the CBD deposition levels of 0.74 ± 0.04 to 2.62 ± 0.30 μg/mg for the dry mucosa. Diethylene glycol monoethyl ether showed significant CBD permeation enhancement (2.1 folds) without an increase in mucosal deposition, while the surfactants retarded the permeation (6.7–9.0 folds) and deposition (1.5–3.2 folds) significantly. In conclusion, besides the drug release, liquid vehicles significantly influence mucosal permeation and deposition, either enhanced or suppressed, in liquisolid systems. Special attention must be paid to the selection and screening of suitable liquid vehicles for liquisolid systems designed for transmucosal applications. [ABSTRACT FROM AUTHOR]

In this study, the mucosal permeation and deposition of cannabidiol (CBD) with neat and binary vehicles were investigated. Permeation experiments were performed using static diffusion cells coupled with fresh porcine esophageal mucosa. The CBD–vehicle solutions were applied at a fixed dose (~5 mg/cm2), and the corresponding permeation parameters were calculated. In neat vehicles, the permeation flux (Jss) ranged from 0.89 ± 0.15 to 179.81 ± 23.46 µg·cm−2·h−1, while the CBD deposition ranged from 11.5 ± 1.8 to 538.3 ± 105.3 μg·cm−2. Propylene glycol (PG) and diethylene glycol monoethyl ether (DEGEE) yielded the highest permeability (Ps) and CBD deposition, while medium-chain triglycerides (MCT) yielded the lowest Ps and deposition. This was due to the difference in apparent partition coefficient (K), which is related to the solubility of CBD in the vehicle. The PG:DEGEE binary vehicle boosted Jss (1.5–1.6 fold) and deposition (2.0–2.7 folds) significantly, compared to neat DEGEE. The combination of DEGEE with MCT dramatically enhanced Jss (11–44 fold) and deposition (1.6–4.7 fold). The addition of lipophilic enhancers, laurocapram, and oleic acid, to PG:DEGEE and DEGEE:MCT vehicles significantly reduced Jss (0.3–0.7 fold) and deposition (0.4–0.8 fold) while nerolidol had no effect. These permeation reductions were found to be related to modification of the K and/or diffusivity values. This study provides useful basic information for the development of CBD formulations intended for transmucosal delivery. [ABSTRACT FROM AUTHOR]