Search

Functional composite films were successfully prepared from cellulose, graphite (GP), and polyaniline (PANI) using a combination of physical and chemical processes. Cellulose was dissolved in N-methylmorpholine-N-oxide monohydrate (NMMO) and regenerated in water to form the matrix. GP was dispersed in the NMMO solvent prior to the dissolution of the cellulose, and PANI was deposited on the surfaces of the cellulose/GP films by in situ chemical polymeriz ation. The structures of the PANI/cellusose/GP composite films were investigated using X-ray diffraction analysis, Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), and SEM/energy-dispersive X-ray spectroscopy. The mechanical strengths, thermal stabilities, conductivities, and antibacterial activities of the films were studied in detail. The results showed that GP formed a multilayered structure in the cellulose matrix and that the PANI nanoparticles were tightly wrapped on the film surface. The film thickness increased from 40 mm to 100 mm after the addition of GP and PANI. The tensile strength of the composite films was 80∼ 107 MPa, with the elongation at break being 3%∼ 10%. The final residual weight of the composite films was as high as 65%, and the conductivity of the composite films reached 14.36 S/m. The cellulose matrix ensured that the films were flexible and exhibited desirable mechanical properties, while the GP filler significantly improved the thermal stability of the films. The PANI coating acted as a protective layer during burning and provided good electrical conductivity and antibacterial activity against Escherichia coli; both of these characteristics were slightly enhanced by the incorporation of GP. These PANI/cellulose/GP composite films should be suitable for use in electronics, antistatic packing, and numerous other applications. [ABSTRACT FROM AUTHOR]

Despite its biodegradability, adeq uate cohesive strength and comparatively low cost, the use of cooked starch as a paper coating binder is limited due to its high viscosity and serious negative impact on the gloss. Starch-based bio-latex with siz e in the nanometer or sub-micrometer range has been developed recently to overcome these shortcomings. In this study, ultrafine starch particle (UFSP) was prepared by mechanical milling using a DYNO mill in combination with light chemical pretreatment. Model coating colors containing different dosages of UFSP were applied to base paper and the properties of the coated papers were evaluated. The results showed that the UFSP was disc-shaped with a median particle diameter of 167 nm. Water retention capacity of the coating colors was improved considerably with the addition of UFSP, i.e., the water retention value decreased by nearly 40% when styrene-butadiene latex was replaced by UFSP at a dosage of 3 pph (per hundred parts of pigment). The high shear rate viscosities of the coating colors containing no more than 2 pph of USFP were similar to that of the control coating color at shear strain rate higher than 2000 s-1The properties and performances of the coated papers were comparable to the control coated paper with single synthesiz ed latex binder. The gloss and the print gloss of paper samples with or without USFP were 59.7% and 58.2%, 79.0% and 78.8%, respectively. Surface strength of paper samples with or without USFP were 0.96 and 0.90 m/s, respectively, while the ink absorptivity values were 34% and 33%. This study demonstrates a promising approach to obtain submicrometer sized starch for paper coating. [ABSTRACT FROM AUTHOR]