Search

Background: As no previous study has directly compared the linear wear rate in two types of second-generation annealed highly cross-linked polyethylene, we performed a retrospective study with a minimum of 5-year follow-up to assess primary arthroplasties in the (1) wear rates and (2) incidence of osteolysis of the two types of HXLPE., Hypothesis: There was no significant difference in the linear wear rate and the incidence of osteolysis between the two types of second-generation annealed highly cross-linked polyethylene., Patients and Methods: In this single-center study, we reviewed 257 cases of primary cementless total hip arthroplasties between 2011 and 2015, which were performed with 32mm delta ceramic on second-generation annealed highly cross-linked polyethylene (X3 and E1 were used in 105 and 103 cases, respectively.). The mean wear rate was evaluated using a computer-assisted method, and the incidence of osteolysis was evaluated based on the appearance of a localized area with loss of trabecular bone or cortical erosion adjacent to the implants during the latest follow-up., Results: In total, we evaluated 208 cases, followed postoperatively for over 5 years (mean, 6.1 years, range: 5.0-8.0). There were no significant differences between the two groups with respect to age (list in order of Group X, Group E, p value) (61.2±12.3, 62.7±12.1, p=0.36), sex (ratio of male: 17.1%, 14.6%, p=0.61), body mass index (22.9±3.7, 22.8±4.0, p=0.91), pre- (49.9±14.8, 48.5±13.8, p=0.49) and post-operative (91.3±9.1, 92.7±7.0, p=0.23) Japanese Orthopaedic Association Hip Score, cup size (50.8±3.0, 50.9±2.2, p=0.70), cup inclination (38.7±4.8, 37.6±4.8, p=0.10), and cup anteversion (18.7±6.9, 18.5±7.6, p=0.80). The mean linear wear rates of the X3 and E1 groups were 0.057±0.039 (range: 0-0.16) and 0.054±0.037mm/year (range: 0-0.15), respectively (p=0.61). No osteolysis was found on the final plain radiographs in both groups., Discussion: This study revealed that both types of highly cross-linked polyethylene have excellent linear wear rates and were equally safe to use. However, the difference between the two materials in terms of the long-term wear rate should be further validated., Level of Evidence: III; retrospective case control study., (Copyright © 2021 Elsevier Masson SAS. All rights reserved.)

Introduction: During a L'Episcopo transfer procedure, the tendons of the latissimus dorsi and teres major are reinserted on the posterolateral side of the humeral shaft to restore active external rotation. The aim of this study was to monitor the radiological changes at the insertion point of this transfer and to evaluate its impact on the clinical outcomes., Materials and Methods: In this retrospective, single-center study, 13 patients (mean age 56 years; 19-84) were reviewed after a minimum follow-up of 2 years. The L'Episcopo transfer was done either alone (n=2) or in combination with reverse shoulder arthroplasty (n=11). The same transfer technique was used in both instances, with reattachment by transosseous sutures. The clinical assessment consisted of the Constant score (CS), the Activities of Daily Living Requiring Active External Rotation (ADLER) score and the Subjective Shoulder Value (SSV). Radiographs were used to look for signs of osteolysis of the cortical bone in the tendon transfer areas and classified as grade 1 (minor erosion), grade 2 (moderate erosion) and grade 3 (major erosion)., Results: At a mean follow-up of 37 months (24-72), the mean CS was 60 points (32-75), the ADLER was 21 points (15-30) and the SSV was 77% (10-95). In the radiographic analysis, 10/13 patients had osteolysis visible in the transfer area: 2 were grade 1 (15%), 1 was grade 2 (8%), 7 were grade 3 (54%). There was no statistical correlation between the presence of osteolysis and the clinical outcomes. Nevertheless, external rotation with elbow at side and forward flexion were better in the patients who had osteolysis≥grade 2., Conclusion: The L'Episcopo transfer is associated with frequent osteolysis of the humeral cortex where the transfer is attached, even though the transfer appears effective. Long-term follow-up will be needed to evaluate the impact of this osteolysis on the stability of any shoulder arthroplasty implants., Level of Evidence: IV; retrospective study., (Copyright © 2021 Elsevier Masson SAS. All rights reserved.)

Hypothesis: Mobile-bearing total knee arthroplasty (TKA) implants were developed as an alternative to fixed-bearing implants because of their theoretical advantages related to wear and range of motion. For all that, none of the short-term and medium-term studies published so far have reported a significant clinical improvement related to these mobile bearings. The goal of this study was to compare the outcomes of fixed and mobile bearings in the same type of TKA model after a longer follow-up., Material and Methods: This series initially comprised 100 patients with a mean age of 73 years who were operated by a single surgeon. The patients were randomised to receive either a fixed bearing TKA implant or a mobile one; their outcomes evaluated after a mean of 9 years (7.2-12.2) follow-up. Twenty-two patients died before the final review, 15 were lost to follow-up and 2 were excluded. This resulted in 30 patients with a mobile-bearing knee and 31 with a fixed-bearing knee being available for analysis., Results: There were no significant clinical differences between the groups receiving a fixed or mobile bearing in terms of the range of motion, subjective outcomes or validated outcomes measured, such as the self-reported Oxford or the IKS. Conversely, there was a significantly higher rate of osteolysis in the fixed-bearing group, but it was not clinically relevant., Conclusion: This study, which has the longest published follow-up, confirms the results found in the seven randomised studies published up to now: there are no significant differences in the clinical outcomes between fixed-bearing and mobile-bearing inserts of the same TKA model. Although the mobile bearing knees had a better radiographic appearance, this did not translate to better clinical outcomes. In practice, the superiority of mobile bearings is solely theoretical., Level of Evidence Ii: Prospective randomised study., (Copyright © 2015 Elsevier Masson SAS. All rights reserved.)

Introduction: Medium-term studies of ABG-1 cementless total hip arthroplasty have shown favorable functional results with excellent femoral component fixation but an abnormally high rate of periacetabular component osteolysis, which may require early revision., Hypothesis: The periacetabular osteolysis rate increases with time with the ABG-1 implant, leading to a high revision rate., Objective: The objective of this study was to test this hypothesis with a minimum follow-up of 10 years and evaluate the progression of periacetabular osteolysis and its consequences on implant fixation., Material and Methods: A continuous series of 111 ABG-1 cementless prostheses implanted by a single operator with a theoretical minimum follow-up of 10 years. Seventy-five implants were analyzed with a mean follow-up of 13 years. All the prostheses had been implanted via a posterolateral approach and consisted of a 28 mm cup matching a head in zirconia and an antidislocation rim design high-density polyethylene insert., Results: Twelve cups were revised because of progressive retroacetabular osteolysis. The revisions were performed systematically although there was no pain or gross cup loosening. The revisions included resection of the granuloma, cavity filling with morselized bone grafts, and implantation of new uncemented ABG-2 cups in eight cases or cemented cups associated with a support ring in the four other cases. Thirty-two (48.5%) of the cups still in place at the end of the follow-up evaluation presented moderate and asymptomatic radiographic osteolysis, inciting close subsequent observation. No predictive factor of osteolysis onset was identified (age, body mass index, polyethylene wear, or cup orientation). None of the femoral stems was changed because of osteolysis: the only two femoral revisions resulted from periprosthetic fracture and one case of bipolar loosening. The femoral osteolysis images were small and all limited to zones 7a (18.8% of cases), 1a, and 1b (65.2% of cases). The overall survival rate of the series at 13 years of follow-up was 80.5%; the cup survival rate was 83.2%; the femoral implant, 94.3%; and failure of the femoral stem secondary to aseptic loosening was only 1.3%., Discussion, Conclusion: This long-term study confirms the high frequency of retroacetabular osteolysis of ABG-1 prostheses surpassing the osteolysis rate of other uncemented cups with a polyethylene insert. The absence of predictive criteria of osteolysis occurrence and the lack of symptoms warrants periodic follow-up of patients with ABG-1 cups and, if necessary, early repair of bone stock loss with grafts combined with acetabular cup revision. This procedure remains simple as long as performed before the onset of massive bone destruction, confirming the proposed revisions in this series were judicious. This study also confirms the excellent long-term fixation of the ABG-1 femoral stems derived from the osteointegration and proximal seal around the hydroxyapatite coating.