Search

New high-repetition-rate x-ray free electron lasers (XFELs) require for their operation highly reliable ultrafast laser systems with high pulse energy, high repetition rate, and high average power. In this Letter, we present high-average-power scaling of near-infrared optical parametric chirped pulse amplification (OPCPA) in potassium titanyl arsenate (KTA) with tunable center wavelengths from 1.5 to 2.0 μm. Using a three-stage amplification scheme and a kW-level InnoSlab Yb:YAG pump amplifier for the final non-collinear KTA stage, we demonstrate an amplified output power of 106.2 W at a center wavelength of 1.75 μm and 100 kHz. Idler absorption introduces a potential upper limit on the average power scaling of center wavelengths

We present a 100 kHz, sub-20 fs optical parametric chirped-pulse amplifier (OPCPA) system delivering 88.6 W average power at a center wavelength of 800 nm. The seed pulses are derived from the pump laser via white-light continuum generation and are amplified in three non-collinear OPCPA stages. The final two high-power stages are pumped with a 661 W Yb:YAG InnoSlab amplifier. A simple and robust design is used for the OPCPA system to avoid thermal effects and enhance long-term stability, resulting in excellent beam quality and high conversion efficiency. To the best of our knowledge, this is the highest average power OPCPA system reported to date.

Optical parametric chirped-pulse amplifiers with high average power are possible with novel high-power Yb:YAG amplifiers with kW-level output powers. We demonstrate a compact wavelength-tunable sub-30-fs amplifier with 11.4 W average power with 20.7% pump-to-signal conversion efficiency. For parametric amplification, a beta-barium borate crystal is pumped by a 140 W, 1 ps Yb: YAG InnoSlab amplifier at 3.25 MHz repetition rate. The broadband seed is generated via supercontinuum generation in a YAG crystal.

We report the amplification of three-cycle, 8.5 fs optical pulses in a near-infrared noncollinear optical parametric chirped-pulse amplifier (OPCPA) up to energies of 80 mJ. Improved dispersion management in the amplifier by means of a combination of reflection grisms and a chirped-mirror stretcher allowed us to recompress the amplified pulses to within 6% of their Fourier limit. The novel ultrabroad, ultraprecise dispersion control technology presented in this work opens the way to scaling multiterawatt technology to even shorter pulses by optimizing the OPCPA bandwidth.

We report on the implementation of a high-count-rate charged particle imaging detector for two-color pump-probe experiments at the free electron laser in Hamburg (FLASH). In doing so, we have developed a procedure for finding the spatial and temporal overlap between the extreme UV free electron laser (FEL) pulses and the IR pulses, which allows for complete alignment of the setup in situations where the region of overlap between the FEL and the IR is not easily accessible by means of imaging optics.

We present a two-stage noncollinear optical parametric chirped-pulse amplification system that generates 7.9 fs pulses containing 130 mJ of energy at an 805 nm central wavelength and 10 Hz repetition rate. These 16 TW light pulses are compressed to within 5% of their Fourier limit and are carefully characterized by the use of home-built pulse diagnostics. The contrast ratio before the main pulse has been measured as 10(-4), 10(-8), and 10(-11) at t=-3.3 ps, t=-5 ps, and t=-30 ps, respectively. This source allows for experiments in a regime of relativistic light-matter interactions and attosecond science.