Search

Despite its widespread significance, the temporal coupled-mode theory (CMT) lacks a foundational validation based on electromagnetic principles and stands as a phenomenological theory relying on fitted coupling coefficients. We employ an ab initio Maxwellian approach using quasinormal-mode theory to derive an "exact" Maxwell evolution (EME) equation for resonator dynamics. While the resulting differential equation bears resemblance to the classical one, it introduces novel terms embodying distinct physics, suggesting that the CMT predictions could be faulted by dedicated experiments, for instance carried out with short and off-resonance pulses, or with resonators of sizes comparable to or greater than the wavelength. Nonetheless, our examination indicates that, despite its inherent lack of strictness, the CMT enables precise predictions for numerous experiments due to the flexibility provided by the fitted coupling coefficients. The new EME equation is anticipated to be applicable to all electromagnetic resonator geometries, and the theoretical approach we have taken can be extended to other wave physics.

In this study, AlGaN-based deep-ultraviolet light-emitting diodes (DUV-LEDs) processed via standard laser dicing (SLD) and multifocal laser stealth dicing (MFLSD) were investigated. Adopting the MFLSD technology would generate a roughing surface rather than the V-shaped grooves on the sidewall of 508 × 508 µm 2 DUV-LEDs, which would reduce the forward operating voltage and increase the wall-plug efficiency, light output power, and far-field radiation patterns of these devices. In addition, the wavelength shift, far-field patterns, and light-tracing simulation results of the DUV-LEDs processed with SLD and MFLSD were clearly demonstrated and analyzed. Accordingly, it was observed that the MFLSD process provided more possibilities for photon escape to increase the light extraction efficiency (LEE) of DUV-LEDs, thus decreased the wavelength-redshift and junction temperature in DUV-LEDs. These results provide a reference for advanced nano-processing practices implemented during the fabrication of semiconductor devices.

What we believe to be a novel high-sensitivity fiber-optic pressure sensor based on the vernier effect and helical structure is proposed and experimentally verified. The sensor utilizes the superposition of higher-order mode Mach-Zehnder interference and Sagnac fundamental mode polarization interference in a single fiber ring to achieve the vernier effect. In addition, a non-invasive encapsulation structure was fabricated to convert the rise and fall of the pressure value into the change in the twist angle of the optical fiber. This approach reduces the interference of the detecting medium on the sensor signal while simultaneously increasing the sensitivity of the pressure sensor. According to experimental data, the detection sensitivity of the sensor can reach -67277 nm/MPa, which is 65 times higher than the sensitivity of the conventional vernier effect pressure sensor. It also solves the issue of temperature interference with the Vernier-effect structured fiber optic sensor. The sensor has a measured temperature cross-sensitivity of 0.000065 kPa/°C, which is significantly lower than that of comparable sensors. This makes the sensor highly sensitive and ideal for low crosstalk pressure measurement.

In this paper, we propose a chaotic block-matching and three-dimensional (C-BM3D) filtering algorithm to remove the noise and enhance the security in the turbulent channel of free space optical (FSO) communication. We experimentally demonstrate the performance of C-BM3D by comparing it with chaotic non-local means filtering (C-NLM), chaotic Gaussian filtering and chaotic Median filtering based on Log-normal and Gamma-Gamma turbulence models. The results show that the peak signal-to-noise ratios (PSNRs) of C-BM3D in the weak turbulence under Log-normal and Gamma-Gamma models are up to 96.2956 and 93.2853, respectively. The C-BM3D also achieves superior image similarity in Log-normal turbulent channel, with its structural similarity index measures (SSIMs) nearly equal to 1. Additionally, the signal-to-noise ratio (SNR) of C-BM3D ranks the highest, and its bit error rate (BER) improves by at least 15 dB compared to that of the other three algorithms. The experimental results indicate that the C-BM3D can be a good candidate for the next generation of FSO communication in security and turbulence resistance.

To realize the high sensitivity polarization sensitive optical coherence tomography (PS-OCT) imaging, a fiber-based full-range depth-encoded swept source PS-OCT (SS-PS-OCT) method is proposed. The two OCT images corresponding to the orthogonal polarized input light are located on the high sensitivity imaging region of the opposite sides relative to the zero optical path difference position. The full-range OCT images can be obtained by implementing the spatial phase modulation in the reference arm. The detection sensitivity of the system was measured experimentally to be 67 dB when the imaging depth approaching to 2 mm. The imaging of the biological tissue verifies that the proposed full-range depth-encoded SS-PS-OCT system has the higher detection sensitivity compared with the conventional depth encoded SS-PS-OCT system. Finally, we demonstrated the full-range high sensitivity phase retardation image of the bovine tendon and skin of human fingertip. The fiber-based full-range depth-encoded SS-PS-OCT method can realize the high sensitivity birefringence imaging in the medical diagnosis scenes with the requirements for long imaging range and high detection sensitivity.

A theoretical channel impulse response (CIR) model of short-range non-line-of-sight (NLOS) ultraviolet communications (UVC) in noncoplanar geometry under the single-scatter condition is proposed. Simulation results obtained from the widely accepted Monte-Carlo (MC)-based channel model of NLOS UVC are provided to verify corresponding theoretical results obtained from the proposed theoretical single-scatter CIR model. Additionally, an outdoor experiment with a light-emitting diode (LED) as the light source is first designed to measure the channel step response of NLOS UVC and to further validate the proposed theoretical single-scatter CIR model. By varying the different parameters of the transmitter and the receiver, such as the baseline range, the inclination angle, the azimuth angle, the beam divergence angle, and the field-of-view angle, the results of the proposed theoretical single-scatter CIR model and the MC-based channel model are exhibited and further analyzed in detail. Results indicate that the computational time cost by the proposed theoretical single-scatter CIR model is decreased to less than 0.6% of the MC-based one with comparable accuracy in assessing the temporal characteristics of NLOS UVC channels. Additionally, theoretical results obtained from the proposed theoretical single-scatter CIR model manifest satisfactory agreement with corresponding experimental measurements.

Lissajous micro scanners are very attractive in compact laser scanning applications for biomedical endoscopic imaging, such as confocal microscopy, endomicroscopy or optical coherence tomography. The scanning frequencies have a very important effect on the quality of the resulting Lissajous scanning imaging. In this paper, we propose a frequency selection rule for high definition and high frame-rate (HDHF) Lissajous scanning imaging, by deriving the relationship among the scanning field of view (FOV), actuation frequencies and pixel size based on the characteristics of the scanning trajectory. The minimum sampling rate based on the proposed frequency selection rule is further discussed. We report a lead zirconate titanate piezoelectric ceramic (PZT) based Lissajous fiber scanner to achieve HDHF Lissajous scanning imaging. Based on the frequency selection rule, different frequency combinations are calculated, under which the Lissajous fiber scanner can work at the frame rate (FR) of 10 Hz, 20 Hz, 40 Hz and 52 Hz. The trajectory evolution of the Lissajous scanning at the frame rate of 10 Hz has been obtained to verify the applicability of the proposed rule. The measured resolution of the scanner is 50.8 lp/mm at the unit optical magnification, and the measured FOV at the FR of 10 Hz and 40 Hz are 1.620 mm ×1.095 mm and 0.405 mm ×0.27 mm, respectively. HDHF Lissajous scanning images of the customized spatial varying binary pattern are obtained and reconstructed at the FR of 10 Hz and 40 Hz, demonstrating the practicability of the frequency selection rule.

The Ritchey-Common test is widely adopted to measure large optical flats. The traditional Ritchey-Common test eliminates the defocus error with multiple tests by changing the position of the mirrors, which suffers from cumbersome steps, poor repeatability, coupled system error, extra mirror deformation, and potential overturning. The above problems increase the test time, decrease the reliability and accuracy, increase the test cost, and threaten manufacturing safety. We propose a single-test Ritchey-Common interferometry to avoid the obligatory position change in the traditional method. A sub-aperture of test flat is directly measured by a small-aperture interferometer before the test, which is easy to implement, to replace the extra system wavefront measurement in different positions. The defocus is calculated in sub-aperture at exactly the same position as the full-field measurement without the position change, then the surface form under test can be obtained with accurate optical path modeling. Measurement experiments for 100 mm and 2050 mm aperture flats were performed to demonstrate the feasibility of this method. Compared with a direct test in a standard Zygo interferometer, the peak to valley (PV) and root mean square (RMS) errors were 0.0889 λ and 0.0126 λ (λ=632.8 nm), respectively, which reaches the upper limit of accuracy of the interferometer. To the best of our knowledge, this is the first proposal of the Ritchey-Common test that can eliminate the defocus error and realize high accuracy measurement in a single test. Our work paves the way for reliable and practical optical metrology for large optical flats.

Adaptive optics using direct wavefront sensing (direct AO) is widely used in two-photon microscopy to correct sample-induced aberrations and restore diffraction-limited performance at high speeds. In general, the direct AO method employs a Sharked-Hartman wavefront sensor (SHWS) to directly measure the aberrations through a spot array. However, the signal-to-noise ratio (SNR) of spots in SHWS varies significantly within deep tissues, presenting challenges for accurately locating spot centroids over a large SNR range, particularly under extremely low SNR conditions. To address this issue, we propose a piecewise centroid calculation algorithm called GCP, which integrates three optimal algorithms for accurate spot centroid calculations under high-, medium-, and low-SNR conditions. Simulations and experiments demonstrate that the GCP can accurately measure aberrations over a large SNR range and exhibits robustness under extremely low-SNR conditions. Importantly, GCP improves the AO working depth by 150 µm compared to the conventional algorithm.

Single-photon lidar has emerged as a strong technology for bathymetric measurements. However, its heightened sensitivity additionally makes it susceptible to solar radiation noise, particularly in the green light wavelength where solar radiation is strong, posing challenges for its daytime operation. To address this issue, a single-photon underwater lidar system is proposed and demonstrated. This scheme has these features. 1) Underwater applications not only mitigate the impact of the air-water interface on laser transmission but also significantly attenuate solar radiation reaching the lidar due to the absorption and scattering properties of water. 2) The telescope is designed with a small aperture and narrow field of view to significantly suppress solar radiation. 3) A combination of a narrowband laser and narrowband filter technique is effectively employed to minimize residual solar radiation, thus enabling continuous bathymetric observation capabilities during both day and night. 4) After acquiring the backscattered signal from the bottom, a water depth extraction algorithm utilizing bi-Gaussian fitting is proposed. To demonstrate the robustness of the lidar and the effectiveness of the algorithm, the underwater single-photon lidar system is deployed on a ship to conduct cruise surveys of two bays in the nearshore area, as well as a full-day stationary observation experiment. The lidar measurements are highly consistent with the synchronized sonar observations. The full-day stationary observation experiment showcased its capability to deliver continuous measurements throughout the day and night. These results demonstrate the potential of the system in various applications, including high-precision underwater terrain mapping, obstacle avoidance for underwater platforms, and underwater target imaging.

Precisely and efficiently measuring three-dimensional coordinates of key points on large-scale components in the manufacturing process of aircraft and ships is critically essential. This study presents a multi-target automatic positioning method based on rapid angle and distance measurement in parallel. The measurement processes for angles and distances are decoupled and, when executed simultaneously, aims to enhance the measurement efficiency and automation compared with conventional metrology systems. A cooperative target is devised to realize the rotary-laser scanning angle measurement and absolute distance measurement in parallel. The method of multi-target rough positioning based on rotary-laser scanning and then the precise coordinate measurement method introducing absolute distance constraint are detailed. Especially for the distance measurement, we propose a method to determine the internal zero length and compensate for the distance error caused by mirror offset. A real-site experiment is implemented to verify the method's feasibility and demonstrate that the 3D coordinate measurement accuracy is better than 0.17 mm compared with laser tracker.

The effects of different p-GaN layer thickness on the photoelectric and thermal properties of AlGaN-based deep-ultraviolet light-emitting diodes (DUV-LEDs) were investigated. The results revealed that appropriate thinning of the p-GaN layer enhances the photoelectric performance and thermal stability of DUV-LEDs, reducing current crowding effects that affect the external quantum efficiency and chip heat dissipation. The ABC + f(n) model was used to analyse the EQE, which helped in identifying the different physical mechanisms for DUV-LEDs with different p-GaN layer thickness. Moreover, the finite difference time domain simulation results revealed that the light-extraction efficiency of the DUV-LEDs exhibits a trend similar to that of damped vibration as the thickness of the p-GaN layer increases. The AlGaN-based DUV-LED with a p-GaN layer thickness of 20 nm exhibited the best photoelectric characteristics and thermal stability.

Diamagnetically levitated micro-nano oscillators play a crucial role in fundamental physics research and the advancement of high-precision sensors. Achieving high sensitivity in acceleration or force sensing is a fundamental requirement within these research domains. The primary limitation in achieving such sensitivity is thermal noise, which is directly proportional to the motion damping of the oscillator. Theoretical modeling suggests the presence of significant damping mechanisms induced by eddy currents. In this study, we validated the theoretical model by optimizing the structure of the magnet trap, confirming the impact of eddy currents on the damping of the oscillators. Additionally, we observed another type of damping caused by static charge in moving levitated dielectrics. Subsequently, we proposed an innovative theoretical model to explain this phenomenon and verified its validity during the charge neutralization process. Through these efforts, we successfully reduced the total damping from 1.6 mHz to 0.15 mHz, resulting in an order of magnitude improvement in performance. Our sensing system achieved the highest sensitivity of acceleration sensing in diamagnetically levitated submillimeter-scale dielectric to date, measuring 7.6±0.8)×10 -10 g/Hz. The exploration conducted in this study regarding the analysis and suppression of electromagnetic damping, along with associated thermal noise, holds significant promise for frontier research involving sensing with levitating dielectrics.

With the arrival of the 5th generation mobile network, the number of user devices is increasing exponentially, and thus it is necessary to expand the capacity of transmission systems. In order to further improve the system spectral efficiency on the basis of existing mobile fronthaul devices, we propose a hybrid digital-analog fronthaul transmission system with adaptive insertion of analog bandwidth, which can dynamically change the position of inserted analog bandwidth based on the state information of free space optical (FSO) channel. We consider the effects of atmospheric attenuation and turbulence on the FSO channel and derive an analytical expression for the maximum analog signal bandwidth that can be inserted into the first null of the digital signal spectrum to meet BER requirement of 3.8 × 10 -3 . Through a comprehensive simulation, it is verified that the analog bandwidth is obtained by this expression can exactly represent the lower bound of the simulation results under weak turbulence condition. The obtained results show that the maximum insertable analog bandwidth beyond the spectral null of the digital signal can reach 10% of the digital signal bandwidth, even in the FSO link with a transmission distance of 0.5 km and attenuation factor of 8 dB/km.

Heterodyne phase-sensitive dispersion spectrometer (HPSDS) retrieves the concentration of gas samples by measuring the refractive index fluctuations near the molecular resonance. Compared to previous HPSDS studies focusing on pure intensity modulation, it is attractive to investigate the performance of HPSDS sensor based on a distributed feedback (DFB) laser under conditions where frequency modulation is much higher than intensity modulation. In this work, we report the implementation of a near-infrared HPSDS for methane detection based on the direct modulation of a DFB laser. The performance of our HPSDS is assessed using the characteristic absorption peak of methane near 1653.7 nm. Long-time measurements show that our HPSDS has a detection limit (MDL) of 1.22 ppm at standard atmospheric pressure and room temperature. In the same experimental conditions, we have experimentally compared HPSDS to wavelength modulation spectroscopy (WMS) to evaluate the dynamical range, long-term stability, and precision limits of the two methods.

High harmonic generation from bilayer h-BN materials with different stacking configurations is theoretically investigated by solving the extended multiband semiconductor Bloch equations in strong laser fields. We find that the harmonic intensity of AA'-stacking bilayer h-BN is one order of magnitude higher than that of AA-stacking bilayer h-BN in high energy region. The theoretical analysis shows that with broken mirror symmetry in AA'-stacking, electrons have much more opportunities to transit between each layer. The enhancement in harmonic efficiency originates from additional transition channels of the carriers. Moreover, the harmonic emission can be dynamically manipulated by controlling the carrier envelope phase of the driving laser and the enhanced harmonics can be utilized to achieve single intense attosecond pulse.

We introduce a calcium carbonate birefringent crystal into an Er-fiber laser mode-locked by a saturable absorber, where dual-comb ultrashort pulses with orthogonal polarization have been obtained. The two ultrashort pulse trains from the laser exhibit polarization contrast ratios of 30 dB and 20 dB, indicating that the dual-comb mode-locking is due to the polarization-multiplexing mechanism. The dual-comb ultrashort pulses have central wavelengths of 1564.41 nm and 1564.51 nm, and pulse durations of 825 fs and 805 fs respectively. The optical spectra and pulse durations of the asynchronous ultrashort pulses are nearly identical, so that the output of the laser could be directly used for dual-comb applications. Besides, the repetition-rate difference of the two mode-locked pulses is 673 Hz, while its drift is only 0.093 Hz within 2 hours' time. The low drift of the repetition-rate difference manifests the single-cavity dual-comb Er-fiber laser has a high stability and high common-mode noise suppression. At last, we have tested the dual-comb fiber laser in a ranging experiment, where clear interferogram signal can be observed. The experimental results prove that this single-cavity dual-comb Er-fiber laser based on the birefringent crystal and saturable absorber can be a potential source for spectroscopy, optical imaging, absolute distance measurement and other dual-comb applications.

In this study, deep-ultraviolet light-emitting diodes (DUV LEDs) with different chip sidewall geometries (CSGs) are investigated. The structure had two types of chip sidewall designs that combined DUV LEDs with the same p-GaN thickness. By comparing the differences of the characteristics such as the external quantum efficiency droops, light output power, light extraction efficiency (LEE), and junction temperature of these DUV LEDs, the self-heated effect and light-tracing simulation results have been clearly demonstrated to explain the inclined sidewalls that provide more possibility pathway for photons escape to increase the LEE of LEDs; thus, the DUV LEDs with the CSG presented improved performance. These results demonstrate the potential of CSG for DUV LED applications.

Femtosecond laser micromachining has been considered as a powerful tool for fabricating versatile fiber devices and received increasing attention in recent years. Here, we report on a compact sensor by integrating a bridge-like waveguide inside a single-mode fiber to construct an in-line Mach-Zehnder interferometer and then inscribing a second-order Bragg grating in the core of the same fiber. The interference dip shows good performance in torsion sensing - the maximum torsion sensitivity of 1.5573 nm/(rad/m), the ability to identify the torsion direction, and low perturbation of axial strain. In order to compensate the cross impact of temperature, the fiber Bragg grating dip is employed as the second indicator and combined with the interference dip for discriminating temperature and directional torsion simultaneously. The proposed device also has the merits such as compact size, high thermal stability, and so on.

Beam splitters play important roles in several optical systems. Due to the growing demand for the miniaturization of optical systems, it is necessary to design beam splitters with nanoscale dimensions to miniaturize the essential components for integrated optical circuits. In this work, we propose and numerically demonstrate a broadband, high efficient, and four-channel beam splitter based on a fishnet-shaped metasurface. The proposed structure is constructed of cruciform AlSb nanoantennas on the PDMS substrate. The simple design can split a beam of light into four beams with equal intensity, it achieves a conversion efficiency above 83%, and an anomalous transmission intensity exceeding 0.8 for the wavelength range of 761-835 nm. In this wavelength range, the beam splitting angle changes from 46.45° to 53.68°. Moreover, the four-channel beam splitter is tunable when the metasurface is designed as a discrete structure. At the wavelength of 874 nm, the beam splitting angle can be adjusted from 56.34° to 46.39° as the period increases from 1050 nm to 1207 nm by stretching the substrate. The presented metasurface might enable promising applications in integrated optical devices, owing to its advantages of multi-channel, wide broadband, high efficiency, and large beam split angle.

Dipole-spread function (DSF) engineering reshapes the images of a microscope to maximize the sensitivity of measuring the 3D orientations of dipole-like emitters. However, severe Poisson shot noise, overlapping images, and simultaneously fitting high-dimensional information-both orientation and position-greatly complicates image analysis in single-molecule orientation-localization microscopy (SMOLM). Here, we report a deep-learning based estimator, termed Deep-SMOLM, that achieves superior 3D orientation and 2D position measurement precision within 3% of the theoretical limit (3.8° orientation, 0.32 sr wobble angle, and 8.5 nm lateral position using 1000 detected photons). Deep-SMOLM also demonstrates state-of-art estimation performance on overlapping images of emitters, e.g., a 0.95 Jaccard index for emitters separated by 139 nm, corresponding to a 43% image overlap. Deep-SMOLM accurately and precisely reconstructs 5D information of both simulated biological fibers and experimental amyloid fibrils from images containing highly overlapped DSFs at a speed ~10 times faster than iterative estimators.

Quantum-enhanced measurement technologies can unambiguously discriminate coherent states with accuracy beyond the classical heterodyne measurement. However, typical quantum-enhanced measurement scheme is vulnerable to the thermal noise, which will change the photon counting statistics of the coherent state. This paper presents a threshold-switching strategy that can discriminate quadrature phase-shift-keying coherent states with performance surpassing the typical quantum-enhanced scheme. In our scheme, photon number resolving detectors are used to switch the value of the threshold, which can mitigate the influence of thermal noise and other imperfections. Simulation results show that our scheme unambiguously discriminates the signal states with higher correct probability and the same error ratio compared with the typical scheme. Besides, this scheme can reduce the error ratio simultaneously for thermal noise N ≤ 0.2. The paper demonstrations that quantum-enhanced measurement with the threshold-switching strategy can adapt to different thermal noises by switching the value of the threshold under situations of different thermal noises and signal states.

Microstructure surfaces are widely and deeply applied in optical fields to decrease the volume of an optical system and realize sophisticated optical requirements. This paper studies the machining of optical micro-structures with micro-scale height on single crystal germanium by elliptical vibration assisted sculpturing (EVAS) method in which two vibration amplitudes keep constant. Due to the superimposition of low-frequency sculpture path and high-frequency elliptical locus, the investigations are focused on cutting plane to describe motion trajectory of the tool tip of cutting tool for desired complex motion path and to calculate the sculpture path of elliptical vibration cutting device to make corresponding path of tool tip be the envelope of target profile. A comparative experiment is firstly conducted to verify that elliptical locus would deteriorate machining accuracy without accurate compensation for the ellipse. Following that, 2D and 3D sinusoidal surfaces and a picture, whose structural heights are all not less than 2.0µm, are experimentally machined on single crystal germanium. Satisfying experimental results demonstrate the feasibility of EVAS method for fabricating optical micro-structures on germanium.

The two sidebands of the independent dual-single-sideband (dual-SSB) signal can carry different information to achieve higher spectral efficiency. However, the two sidebands of the independent dual-SSB vector signal are received independently. Generally, the receiver divides the signal into two channels. For each channel, we use an optical bandpass filter (OBPF) to select the left sideband (LSB) or right sideband (RSB), respectively. Then a photodetector (PD) is used for photoelectric conversion, followed by subsequent digital signal processing (DSP). To reduce the complexity and cost of the receiver, we propose a new independent dual-SSB vector signal detection scheme based on a single PD combined with conventional DSP. An electric bandpass filter (EBPF) filters out high-frequency components after photoelectric conversion, and then the signal is quadrature demodulated and processed by the DSP algorithm. The LSB and RSB are quadrature phase-shift keying (QPSK) modulated with an initial phase difference of π/4. Simulation results show that the proposed scheme performs better bit error rate (BER). For back-to-back (BTB) transmission, the BER of 2-Gbaud independent dual-SSB vector signal (1-Gbuad RSB and 1-Gbaud LSB) can reach the hard-decision forward error correction (HD-FEC) threshold of 3.8 × 10 -3 when the input optical power into PD is -20 dBm. For 1-km and 2-km weak turbulence free-space optical (FSO) channel transmission, the BER of 2-Gbaud independent dual-SSB vector signal can reach the HD-FEC threshold when the input optical power into PD is -18.8 and -17 dBm, respectively. For 1-km weak turbulence FSO channel transmission, the BER of 4-, 8-, and 16-Gbuad independent dual-SSB vector signal can reach the HD-FEC threshold when the input optical power into PD is -17.8, -16, and -15 dBm, respectively.

We report a quasi-continuous beam splitter with highly efficient equal-power beam splitting in a wide spectral range. It consists of rhombic aluminum antimonide nanorods standing on a silica substrate. Firstly, a beam splitter based on discrete structures is designed, and the structures are optimized to obtain the quasi-continuous beam splitter. The beam splitter achieves a splitting efficiency of over 80% within the region of 675-786 nm (bandwidth = 111 nm), where the splitting angle can vary in the range of 97.2°-121.8°. In particular, the splitting efficiency reaches 93.4% when the wavelength is 690 nm. Overall, the proposed beam splitter potentially paves the way for realizing broadband metasurfaces and high-performance quasi-continuous metasurface-based devices.

This study utilized thin p-GaN, indium tin oxide (ITO), and a reflective passivation layer (RPL) to improve the performance of deep ultra-violet light-emitting diodes (DUV-LEDs). RPL reflectors, which comprise HfO 2 /SiO 2 stacks of different thickness to maintain high reflectance, were deposited on the DUV-LEDs with 40 nm-thick p-GaN and 12 nm-thick ITO thin films. Although the thin p-GaN and ITO films affect the operation voltage of DUV-LEDs, the highly reflective RPL structure improved the WPE and light extraction efficiency (LEE) of the DUV-LEDs, yielding the best WPE and LEE of 2.59% and 7.57%, respectively. The junction temperature of DUV-LEDs with thick p-GaN increased linearly with the injection current, while that of DUV-LEDs with thin p-GaN, thin ITO, and RPL was lower than that of the Ref-LED under high injection currents (> 500 mA). This influenced the temperature sensitive coefficients (dV/dT, dLOP/dT, and dWLP/dT). The thermal behavior of DUV-LEDs with p-GaN and ITO layers of different thicknesses with/without the RPL was discussed in detail.

By considering both scattering and reflection events as collision-induced events (CIEs), an analytical path loss model of reflection-assisted non-line-of-sight (NLOS) ultraviolet communications (UVC) is proposed with single CIE incorporated, which refers to the single-collision-induced (SCI) path loss model. More specifically, the analytical expressions of the received optical energy resulting from single-scatter and single-reflection events in reflection-assisted NLOS UVC are respectively derived. Then, in terms of those two expressions, the expression of the proposed SCI path loss model is obtained. Finally, Monte-Carlo (MC) simulations and experimental results are given to verify the correctness and effectiveness of the proposed SCI path loss model. The results manifest that the proposed SCI path loss model can work well in both coplanar and noncoplanar geometry of the reflection-assisted NLOS UVC.

In satellite-based free-space continuous-variable QKD (CV-QKD), the parameter estimation for the atmospheric channel fluctuations due to the turbulence effects and attenuation is crucial for analyzing and improving the protocol performance. However, the partial key data usually need to be sacrificed for the parameter estimation leading to the secret key reduction and the possible information leakage, especially when the channel is varying. In this paper, compressive sensing (CS) theory is applied to free-space CV-QKD to achieve the channel parameter estimation with small amount of key data sacrifice and low computational complexity. According to CS theory, the possibility of the sparse representation for free-space channel is analyzed and the two types of sparse reconstruction models for the channel parameters are constructed combining with the stability of the sub-channels. The most part of key data for parameter estimation is saved by using the model constructed by the variables in the quantum signals, while all the key data can be saved and be used to generate the secret key by using the model constructed by the second-order statistics of the variables. Thus, the methods can generate more secret key, improve the secret key rate, and be well adapted for the cases with the limited communication time since fewer or no key data (variables) is sacrificed for parameter estimation. Finally, simulation results are given to verify the effectiveness of the proposed methods.

The scattering of electromagnetic waves by resonant systems is determined by the excitation of the quasinormal modes (QNMs), i.e. the eigenmodes, of the system. This Review addresses three fundamental concepts in relation to the representation of the scattered field as a superposition of the excited QNMs: normalization, orthogonality, and completeness. Orthogonality and normalization enable a straightforward assessment of the QNM excitation strength for any incident wave. Completeness guarantees that the scattered field can be faithfully expanded into the complete QNM basis. These concepts are not trivial for non-conservative (non-Hermitian) systems and have driven many theoretical developments since initial studies in the 70's. Yet, they are not easy to grasp from the extensive and scattered literature, especially for newcomers in the field. After recalling fundamental results obtained in initial studies on the completeness of the QNM basis for simple resonant systems, we review recent achievements and the debate on the normalization, clarify under which circumstances the QNM basis is complete, and highlight the concept of QNM regularization with complex coordinate transforms.

In this study, deep ultraviolet light-emitting diodes (DUV-LEDs) with a reflective passivation layer (RPL) were investigated. The RPL consists of HfO 2 /SiO 2 stacks as distributed Bragg reflectors, which are deposited on two DUV-LEDs with different p-GaN thicknesses. The RPL structure improved the external quantum efficiency droops of the DUV-LEDs with thick and thin p-GaN, thereby increasing their light output power by 18.4% and 39.4% under injection current of 500 mA and by 17.9% and 37.9% under injection current of 1000 mA, respectively. The efficiency droops of the DUV-LEDs with and without the RPL with thick p-GaN were 20.1% and 19.1% and with thin p-GaN were 18.0% and 15.6%, respectively. The DUV-LEDs with the RPL presented improved performance. The above results demonstrate the potential for development of the RPLs for DUV-LED applications.

The abrupt phase changes at the interface can modulate the polarization and wavefront of electromagnetic waves, which is the physical mechanism of the plasmonic metasurfaces. Conventional polarization converters are difficult to obtain pure polarized light, and most of the anomalously reflecting metasurfaces are limited by the specific angle of incident polarization. Here, we present a high-efficient polarization-independent metasurface for broadband polarization conversion and anomalous reflection when a plane wave with an arbitrary polarization angle is incident vertically. We vary the dimensions of the polarization conversion unit cells and arrange them periodically to cover the full 2π phase range of cross-polarized light in two orthogonal directions. The simulation results show that the pure anomalous cross-polarization efficiency is over 80% over a wavelength range from 1400nm to 1800nm. In particular, the metasurface can realize the complementary conversion of polarization angle for incident light at any polarization angle, and deflect it to a specific angle. Our design provides strategies for miniaturization and integration of polarization conversion devices and systems.

A chaotic ribonucleic acid (RNA) and deoxyribonucleic acid (DNA) encryption scheme is firstly proposed for security OFDM-WDM-PON in this paper. We adopt a dynamic key agreement based on the messenger RNA (mRNA) codebook to distribute the key, and the security and randomness of this key are enhanced by a pre-sharing key parameter set instead of transmission of a key directly. Also, the security key can be dynamically updated in real-time according to the needs of the users. The real (I) and imaginary (Q) parts of the QAM symbol matrix after modulation are encrypted by the correspondence between transfer RNA (tRNA) and amino acids and the selection mapping of DNA base complementary rules. Also, we add cubic permutation to ensure all data security encryption. The encrypted signals of 35.29 Gb/s on different wavelength channels are successfully demonstrated over a 25-km standard single-mode fiber (SSMF) and a back-to-back (BTB) system. It is proved that the proposed security OFDM-WDM-PON encryption scheme is compatible with the traditional WDM system, which can make full use of bandwidth resources and enhance the security with a large key space.

A bifunctional broadband absorber in the terahertz band based on patterned bulk Dirac semimetal (BDS) and strontium titanate (STO) is proposed. The properties of the absorber are investigated using the finite-difference time-domain (FDTD) method. The results show that the width of absorption can be modulated from 0.59 THz to 0.7 THz when the Fermi energy of the BDS is independently shifted from 40 meV to 50 meV. By tuning the temperature from 250 K to 400K, the center frequency of the broadband absorption spectrum can be changed from 1.311 THz to 1.505 THz, and the absorption bandwidth broadens from 0.66 THz to 0.81 THz. In addition, the simulation results show that the absorber is insensitive to electromagnetic wave polarization, and can still maintain a stable broadband absorption effect when the oblique incidence is within 40° for TE and TM modes. Based on the impedance matching theory, the physical mechanism of the broadband absorption is analyzed theoretically. This work can provide an alternative way to design high-performance multifunctional tunable terahertz devices.

In this paper, we propose chaotic compressive sensing (CS) encryption algorithms for orthogonal frequency division multiplexing passive optical network (OFDM-PON), aiming at compressing the transmitted data and enhancing the security of data transmission. Bitstream transmission using CS directly is restricted due to its inability to satisfy the sparsity in neither time nor frequency domain. While the sparsity of the transmitted data can be constructed when transmitting the multimedia. A sensor can be then used to identify whether the data is multimedia. If it is, the CS technique is used, and the sensor's result is set as side information inserted into the pilot and transmitted to the terminal simultaneously. For encryption processing, a 2-dimensional logistic-sine-coupling map (2D-LSCM) is used to generate pseudo-random numbers to construct the first row of a measurement matrix to encrypt the system. Four transform formats are then applied to generate the sparsity of the transmitted data. Due to the restriction of data transmission in the physical layer, the discrete cosine transform (DCT) is chosen to conduct the CS technique. Four approximation algorithms are also proposed to optimize the performance of compressing the length of bits. We find that 'Round + Set negative to 0' shows the best performance. The combination of this chaotic CS encryption technique with the OFDM-PON systems saves the bandwidth and improves the security.

We demonstrate a sub-ps resolution clock-offset measurement based on linear optical sampling technique via a 114 km fiber link by transferring a dual optical frequency comb. The time deviation between two distance clocks is 110 fs at 1 s and 22 fs at 100 s averaging, and the standard deviation of the measured clock offset is 237 fs. This sub-ps level of clock offset measurement should benefit many time synchronization applications via long fiber links.

We have demonstrated a simple method to measure high-precision absolute angular displacement using an optical frequency comb (OFC). The dispersive interferometry with parallel configuration can take advantage of its large non-ambiguity range and achieve absolute angular measurement in a large range. The influence factors of the angle accuracy, including the accuracy of optical path difference, the determination of absolute zero position and the correction of sine arm have been analyzed in detail. The angle comparison is performed with the autocollimator and multi-tooth indexing table. The angle accuracy can reach ±2 arcsec (k=2) in the range of 5°, which represents a good agreement with the Monte Carlo simulation. The proposed approach has potential to be extended to multi-degree-of-freedom measurement with a simple structure in future.

Optical clearing methods reduce the optical scattering of biological samples and thereby extend optical imaging penetration depth. However, refractive index mismatch between the immersion media of objectives and clearing reagents induces spherical aberration (SA), causing significant degradation of fluorescence intensity and spatial resolution. We present an adaptive optics method based on pupil ring segmentation to correct SA in optically cleared samples. Our method demonstrates superior SA correction over a modal-based adaptive optics method and restores the fluorescence intensity and resolution at high imaging depth. Moreover, the method can derive an SA correction map for the whole imaging volume based on three representative measurements. It facilitates SA correction during image acquisition without intermittent SA measurements. We applied this method in mouse brain tissues treated with different optical clearing methods. The results illustrate that the synaptic structures of neurons within 900 μm depth can be clearly resolved after SA correction.

Using two well-defined empirical parameters, we numerically investigate the details of the disorder-induced topological state transition (TST) in photonic Chern insulators composed of two-dimensional magnetic photonic crystals (MPCs). The TST undergoes a gradual process, accompanied with some interesting phenomena as the disorder of rod positions in MPCs increases gradually. This kind of TST is determined by the competition among the topologically protected edge state, disorder-induced wave localizations and bulk states in the system. More interestingly, the disorder-induced wave localizations almost have no influence on the one-way propagation of the original photonic topological states (PTSs), and the unidirectional nature of the PTSs at the edge area can survive even when the bulk states arise at stronger disorders. Our results provide detailed demonstrations for the deep understanding of fundamental physics underlying topology and disorder and are also of practical significance in device fabrication with PTSs.

Metasurface-based beam splitters with high efficiency, large split angle, wide bandwidth and easy fabrication are highly desirable and still in pursuit. In this paper, we propose a heuristic scheme for designing an ultra-broadband high-efficiency power beam splitter based on a homogeneous metasurface. The conversion efficiency and total transmission intensity of the power splitter stays higher than 95% and 0.66 within the wavelength region from 604 nm to 738 nm, respectively. Particularly, the conversion efficiency can maintain greater than 99% in 58 nm bandwidth. The angle between two split beams can reach a maximum of 157.82° at the wavelength of 738 nm. In addition to simplified design and easy fabrication, the proposed power beam splitter possesses high robustness as well. We expect that our design can pave a new way for realizing high-performance metasurface-based beam splitters.

This study experimentally demonstrates and theoretically analyzes the enhancement of terahertz (THz) waves from two-color laser-field (consisting of a near-infrared femtosecond laser and its second-harmonic wave) induced air plasma using an additional 800 nm femtosecond laser. The experiments revealed that the additional 800 nm laser increased the THz energy up to 22 times. To understand the enhancement mechanism and reveal the maximum enhancement conditions, the effects of the 800 nm beam's polarization and energy variations of both beams on the THz amplification were studied. With the increase in the 800 nm pulse energy, the THz yield initially increases, and then decreases after reaching an inflection point. The THz increase rate continues to increase with the decrease in energy of the near-infrared two-color fields. The 800 nm beam could efficiently modulate the THz spectral energy distribution by increasing the high-frequency components, while decreasing the low-frequency components.

Highly sensitive, real-time and label-free sensing of liquid flow in microfluidic environments remains challenging. Here, by growing high-quality graphene directly on a glass substrate, we designed a microfluidic-integrated graphene-based flow sensor (GFS) capable of detecting complex, weak, and transient flow velocity and pressure signals in a microfluidic environment. This device was used to study weak and transient liquid flows, especially blood flow, which is closely related to heart and artery functions. By simulating cardiac peristalsis and arterial flow using peristaltic pumps and microfluidic systems, we monitored simulated arterial blood flow. This ultrasensitive graphene-based flow sensor accurately detected a flow velocity limit as low as 0.7 mm/s, a pumping frequency range of 0.04 Hz to 2.5 Hz, and a pressure range from 0.6 kPa to 14 kPa. By measuring the blood flow velocities and pressures, pathological blood flow signals were distinguished and captured by the corresponding flow velocities or pressures, which can reflect vascular occlusion and heart functions. This sensor may be used for the real-time and label-free monitoring of patients' basic vital signs using their blood flow and provide a possible new method for the care of critically ill patients.

An all-optical self-oscillating 4 He atomic magnetometer with a large dynamic range of the magnetic field is demonstrated. This device has the advantage of the fast response of the self-oscillating magnetometer and is not affected by the systematic errors originated from the radio-frequency field. It is also free from the nonlinear Zeeman effect in large magnetic fields. We use a liquid crystal to adjust the phase shift, which is independent of frequency. Results show that our self-oscillating 4 He magnetometer exhibits a response time of 0.2 ms for a step signal of 3600 nT, and the noise floor reaches 1.7 pT / Hz 1/2 for frequencies from 2 Hz to 500 Hz. It can work stably in magnetic fields ranging from 2500 nT to 103000 nT. Compared with the commercial self-oscillating cesium atomic magnetometer (Scintrex, CS-3), the self-oscillating 4 He atomic magnetometer has shown a better gradient tolerance in larger magnetic field. This magnetometer is ideally suited in magnetic observatories to monitor geomagnetic field requiring large dynamic range and high bandwidth.

A hollow waveguide (HWG) based mid-infrared gas sensor using a 2.73 µm distributed feedback (DFB) laser was developed for simultaneously measuring the concentration changes of the three isotopologues 13 CO 2 , 12 CO 2 , and 18 OC 16 O in exhaled breath by direct absorption spectroscopy, and then determining the 13 CO 2 / 12 CO 2 isotope ratio (δ 13 C) and 18 OC 16 O/ 12 CO 2 isotope ratio (δ 18 O). The HWG sensor showed a fast response time of 3 s. Continuous measurement of δ 13 C and δ 18 O in the standard CO 2 sample with known isotopic ratios for ∼2 h was performed. Precisions of 2.20‰ and 1.98‰ for δ 13 C and δ 18 O respectively at optimal integration time of 734 s were estimated from Allan variance analysis. Accuracy of -0.49‰ and -1.20‰ for δ 13 C and δ 18 O, respectively, were obtained with comparison to the values of the reference standard. The Kalman filtering method was employed to improve the precision and accuracy of the HWG sensor while maintaining high time resolution. Precision of 5.45‰ and 4.88‰ and the accuracy of 0.21‰ and -1.13‰ for δ 13 C and δ 18 O, respectively, were obtained at the integration time of 0.54 s with the application of Kalman filtering. The concentrations of 12 CO 2 , 13 CO 2 and 18 OC 16 O in breath cycles were measured and processed by Kalman filtering in real time. The measured values of δ 18 O and δ 13 C in exhaled breath were estimated to be -21.35‰ and -33.64‰, respectively, with the integration time of 1 s. This study demonstrates the ability of the HWG sensor to obtain δ 13 C and δ 18 O values in breath samples and its potential for immediate respiratory monitoring and disease diagnosis.

Frequency scanning interferometry (FSI) is a promising technique for absolute distance measurement and has been demonstrated in many industrial applications. However, in practice, the measurement precision is limited and sensitive to the variations of the measured distance while sweeping the optical frequency of the laser. The induced errors would be amplified by hundreds of times due to the magnification effect. In this paper, an incremental interferometer was established on the basic scheme of the FSI system for monitoring the variations of distance. The compensation could be achieved by multiplying the heterodyne signals from monitor and measurement interferometer without complex and time-costing data processing. The system performance has been verified by experiments for different kinds of vibrating targets. Finally, after compensation by suppression of the magnification effects, a measurement precision of 4.26 μm has been achieved in a range of 10 m.

An approach for peak-to-average-power ratio (PAPR) reduction and security improvement in an orthogonal frequency division multiplexing passive optical network (OFDM-PON) is proposed by using optimum block dividing with 2-dimensional logistic adjusted sine map (2D-LASM) and dynamic key assignment technique. One frame of OFDM signal can be regarded as a symbol matrix. All the divisors of length and width of matrix can be calculated out, and each divisor of length and width can be arbitrarily combined to divide the matrix into blocks. A 4D hyperchaotic system is applied to generate a cipher book for 2D-LASM. And we assign different dynamic key groups from the cipher book for 2D-LASM to encrypt different block dividing situations. Different encrypted divisor blocks can obtain different values of PAPR. The optimum dividing situation is obtained by calculating out the minimum value of PAPR (V PAPR ). The values of optimum encryption signal (V PAPR-op ), the original signal (V PAPR-or ) and the optimization ratio (η) are gradually equal to 146, 269 and 1.82, respectively, with the number of quadrature amplitude modulation (QAM) symbols in each subcarrier increasing. Simulating 1000 sets of 120×200 QAM symbols, the distribution of η approximately meets the Rayleigh distribution and its central distribution is around 1.7. The processing time decreases with the number of QAM symbols increasing in each block. The performance of PAPR reduction is more than 3 dB between the secure optimum signal and the original signal. In addition, the hyper-threading technique with two algorithms is applied to improve the performance of the encryption method. They promote the processing time by 38.6% and 50%, respectively. Finally, a 22.06 Gb/s optimum encryption OFDM signal transmits through a back-to-back (BTB) system and a 25-km standard single mode fiber (SSMF). These experimental results verify that the proposed approach is a promising candidate for solving both of PAPR reduction and security improvement in access network systems.