Search

1000 ppmw Sm 3+ -doped Ge 19.4 Sb 9.7 Se 67.9 Ga 3 atomic % chalcogenide bulk glass and unstructured fiber are prepared. Near- and mid-infrared absorption spectra of the bulk glass reveal Sm 3+ electronic absorption bands, and extrinsic vibrational absorption bands, due to host impurities. Fiber photoluminescence, centred at 3.75 µm and 7.25 µm, is measured when pumping at either 1300 or 1470 nm. Pumping at 1470 nm enables the photoluminescent lifetime at 7.3 µm to be measured for the first time which was ∼100 µs. This is the longest to date, experimentally observed lifetime in the 6.5-9 µm wavelength-range of a lanthanide-doped chalcogenide glass fiber.

We propose a model for resonantly pumped Pr 3+ -doped chalcogenide fiber amplifiers, which includes excited state absorption and the full spectral amplified spontaneous emission spanning from 2 μm to 6 μm. Based on this model, the observed near- and mid-infrared photoluminescence generated from Pr 3+ -doped chalcogenide fiber is explained. Then the output properties of a 4.1 μm resonantly pumped Pr 3+ -doped chalcogenide fiber amplifier are simulated in both co- and counter-pumping schemes. Results show that the 4.1 μm counter-pumped fiber amplifier can achieve a power conversion efficiency (PCE) of over 62.8% for signal wavelengths ranging from 4.5 μm to 5.3 μm. This is, to our best knowledge, the highest simulated PCE for a Pr 3+ -doped chalcogenide fiber amplifier.

We present numerical modeling of mid-infrared (MIR) supercontinuum generation (SCG) in dispersion-optimized chalcogenide (CHALC) step-index fibres (SIFs) with exceptionally high numerical aperture (NA) around one, pumped with mode-locked praseodymium-doped (Pr(3+)) chalcogenide fibre lasers. The 4.5um laser is assumed to have a repetition rate of 4MHz with 50ps long pulses having a peak power of 4.7kW. A thorough fibre design optimisation was conducted using measured material dispersion (As-Se/Ge-As-Se) and measured fibre loss obtained in fabricated fibre of the same materials. The loss was below 2.5dB/m in the 3.3-9.4μm region. Fibres with 8 and 10μm core diameters generated an SC out to 12.5 and 10.7μm in less than 2m of fibre when pumped with 0.75 and 1kW, respectively. Larger core fibres with 20μm core diameters for potential higher power handling generated an SC out to 10.6μm for the highest NA considered but required pumping at 4.7kW as well as up to 3m of fibre to compensate for the lower nonlinearities. The amount of power converted into the 8-10μm band was 7.5 and 8.8mW for the 8 and 10μm fibres, respectively. For the 20μm core fibres up to 46mW was converted.

The progress, and current challenges, in fabricating rare-earth-doped chalcogenide-glass fibers for developing mid-infrared (IR) fiber lasers are reviewed. For the first time a coherent explanation is forwarded for the failure to date to develop a gallium-lanthanum-sulfide glass mid-IR fiber laser. For the more covalent chalcogenide glasses, the importance of optimizing the glass host and glass processing routes in order to minimize non-radiative decay and to avoid rare earth ion clustering and glass devitrification is discussed. For the first time a new idea is explored to explain an additional method of non-radiative depopulation of the excited state in the mid-IR that has not been properly recognized before: that of impurity multiphonon relaxation. Practical characterization of candidate selenide glasses is presented. Potential applications of mid-infrared fiber lasers are suggested.