Search

Combining digital information science with metasurface technology is critical for achieving arbitrary electromagnetic wave manipulation. However, there is a scarcity of contemporary scholarly studies on this subject. In this paper, we propose an Ultraviolet (UV) sensing metasurface for programmable electromagnetic scattering field manipulation by combining light control with a microwave field. The active sensing of UV light and the real-time reaction of the scattering are achieved by integrating four UV sensors on the metasurface. On the metasurface, a UV sensor ML8511 and a voltage driver module are coupled to control each row of the Positive-Intrinsic-Negative (PIN) diodes. Due to the light sensing capability of the UV sensor, the on or off state of the PIN diode integrated into the programmable metasurface can be switched efficiently through the change of light. When the incident wave changes, various discrete data are transmitted to the FPGA. Then the FPGA performs the corresponding voltage distribution to control the state of the PIN diode. Finally, different metasurface coding sequences are generated to realize different electromagnetic functions. As a result, the spatial distribution of sensing light by sensors can be used to determine the electromagnetic field and connect sensing optical information with the microwave field. The simulation and measured results show that this design is feasible. This work provides a dimension for electromagnetic waves modulation.

Recently, optically-transparent metasurface based on indium tin oxide (ITO) film has attracted wide attention due to its remarkable optical and electromagnetic characteristics. However, most previous researches on the ITO film mainly focus on the absorption because of its prominent loss-resistance property, but neglecting the further exploration on programmable functions. Here, we present a programmable metasurface based on an optically-transparent ITO glass, on which varactors are integrated to achieve flexible amplitude manipulation range of about 25 dB. More importantly, the presented programmable design can be applied for direct modulation on the carrier incident wave with the desired pre-designed analog wave-form. Within the 10 MHz modulation speed, both programmable amplitude manipulation and analog information modulation are demonstrated in the measurements, showing good agreement with theoretical analysis and simulations. Combining both optical transparency and programmable modulation capability, the presented metasurface will promote the potential applications in wireless communication, internet of things and other smart scenarios.

Applying multiple physical fields to artificial manipulate electromagnetic waves is a highly stirring research. In this paper, we creatively combine light control with microwave scattering, realizing an optically coding metasurface for beam deflection based on anomalous reflection. A photoresistor and a voltage-driven module are connected to control each row of PIN-diode-loaded unit cells, endowing the reflection phase of the elements with a strong dependence on light. Owing to the high sensitivity of photoresistor, the digital element state "0" or "1" can be switched effectively via light variation sensed by the photoresistor. By modulating the light signal, the arrangement of digital elements can be reprogrammed, generating the specific scattering field. Therefore, the electromagnetic field can be determined by the spatial distribution of light, which induces the connect with the optical information and microwave field. The simulated and experimental results demonstrate the feasibility of our design. This light-steering approach provides a dimension for electromagnetic wave modulation.