Search

We theoretically and experimentally study the noise correlations in an array of lasers based on a VECSEL (Vertical External Cavity Surface Emitting Laser) architecture. The array of two or three lasers is created inside a planar degenerate cavity with a mask placed in a self-imaging position. Injection from each laser to its neighbors is created by diffraction, which creates a controllable complex coupling coefficient. The noise correlations between the different modes are observed to be dramatically different when the lasers are phase-locked or unlocked. These results are well explained by a rate equation model that takes into account the class-A dynamics of the lasers. This model permits the isolatation of the influence of the complex coupling coefficients and of the Henry α-factor on the noise behavior of the laser array.

Metamaterials have played a major role in the development of optoelectronic devices due to their capability of coupling free-space radiation with active materials at the nanometer scale. In particular, unipolar photodetectors display highly improved performances when implemented into patch-antenna arrays. We study light-coupling and absorption in patch-antenna metamaterials by combining an experimental investigation, an analytical approach based on coupled mode theory and numerical simulations in order to understand how the geometrical parameters influence the electromagnetic energy transfer from the free-space to the active material. Our findings are applied to the design of optimized unipolar photodetectors with improved quantum efficiency.

We present bi-frequency continuous wave oscillation in a semiconductor disk laser through direct writing of loss-inducing patterns onto an intra-cavity high reflector mirror. The laser is a Vertical External Cavity Surface Emitting Laser which is optically pumped by up to 1.1 W of 808 nm light from a fibre coupled multi-mode diode laser, and oscillates on two Hermite-Gaussian spatial modes simultaneously, achieving wavelength separations between 0.2 nm and 5 nm around 995 nm. We use a Digital Micromirror Device (DMD) enabled laser ablation system to define spatially specific loss regions on a laser mirror by machining away the Bragg layers from the mirror surface. The ablated pattern is comprised of two orthogonal lines with the centermost region undamaged, and is positioned in the laser cavity so as to interact with the lasing mode, thereby promoting the simultaneous oscillation of the fundamental and a higher order spatial mode. We demonstrate bi-frequency oscillation over a range of mask gap sizes and pump powers.

Thermal properties of InP-based quantum well photonic crystal nanobeam lasers heterogeneously integrated on silicon on insulator waveguides are studied. We show both numerically and experimentally the reduction of the thermal resistance of the III-V cavities by adjusting the composition of the layer which bonds the III-V materials to the silicon wafer and by adding an over-cladding on top of the cavities. Using a bonding layer made of benzocyclobutene and SiO(2) and an over-cladding of MgF(2), we found a decrease by a factor higher than 35 compared to air-suspended photonic crystal nanobeam cavities. Such optimized structures are demonstrated to operate under continuous wave pumping for several 10's of minutes despite the adverse effect of non-radiative surface recombination of carriers.

We have developed surface-emitting single-mode quantum cascade lasers which employ high-contrast photonic-crystal resonators. The devices operate on band-edge states of the photonic band-structure. The mode profile and polarization characteristics of the band-edge modes are calculated by three-dimensional finite-difference time-domain simulation. Experimentally, the spectral properties, the far-field patterns, and the polarization characteristics of the lasers are determined and compared with simulations. The good agreement between the simulations and the experiments confirms that the hexapolar mode at the Gamma-point band-edge gives rise to lasing. By using a novel and advanced fabrication method, deep and vertical PhC holes are fabricated with no metal redeposition on the sidewalls, which improves the laser performance with respect to the current status. The angular of the output beam is approximately 15 masculine, and the side mode suppression ratio of the single mode emission is about 25 dB. The threshold current density at 78 K and the maximum operation temperature are 7.6 kA/cm2 and 220 K, respectively. The performance is mainly limited by the loss induced by surface plasmon waveguide, which can be overcome by using an optimized dielectric waveguide structure.

We report on the continuous-wave operation of a band edge laser at room temperature near 1.55 mum in an InGaAs/InP photonic crystal. A flat dispersion band-edge photonic mode is used for surface normal operation. The photonic crystal slab is integrated onto a Silicon chip by means of Au/In bonding technology, which combines two advantages, efficient heat sinking and broad band reflectivity.