Search

We report theoretical results on the wavelength stability of a multisection master-oscillator power-amplifier emitting at 1064 nm. We use a traveling wave equation model to calculate the optical output power and spectral maps versus the currents injected into the different sections of the device. The numerical model explains quantitatively the experimental findings, particularly the collapse of the power if the current injected into a control section adjacent to the distributed Bragg reflector laser acting as master oscillator exceeds certain values. We investigate the influence of the reflectivity at the facet of the power amplifier on the laser behavior. [ABSTRACT FROM AUTHOR]

We present the strict design parameters of the experiment for the 780 nm tunable continuous-wave second harmonic (SH) generation by the nonlinear resonator containing a MgO doped periodically poled LiNbO (MgO:PPLN) crystal. Optimization of such critical parameters, including focusing and impedance matching, more than 84% SH conversion efficiency and 3.1 W available output power at 780 nm were obtained from the fundamental wave at 1560 nm with two different input couplers. The thermal saturated behavior of the SH output power has been observed in the experiment. The beam quality factor M of the generated SH wave is 1.04 (1.03), and the RMS power stability is 1.29% in 3 h. The SH wave was further used to detect the D transitions of Rb atom, exhibiting a fine tunable characteristic. Such laser source can be a suitable candidate in the atomic physics and quantum optics. [ABSTRACT FROM AUTHOR]

Due to the complex lateral structure of Distributed Feedback lasers (DFB) and Master Oscillator Power Amplifiers (MOPAs), one-dimensional methods like the classical Transfer Matrix Method (TMM) are not suitable for simulating the optical wave in these devices. Therefore, we applied Trigonometric Finite Wave Elements (TFWE) that generalize the TMM in two or three dimensions. By coupling the dynamic wave equation with simplified temperature and drift-diffusion models, we can simulate the dynamic behavior of DFB lasers and MOPAs. Furthermore, by Fourier transformation, we can calculate the modes of the laser cavity and the corresponding wavelengths. By this approach, the influence of injection current and temperature on the resulting modes and output power can be analyzed in detail. [ABSTRACT FROM AUTHOR]

A method for increasing the output power of a phase conjugated oscillator (PCO) by using two stimulated-Brillouin-scattering (SBS) cells is described. The average power has been more than doubled and the peak power has been increased by twenty times compared to the single-SBS-cell PCO. Near unity beam quality has been measured. [ABSTRACT FROM AUTHOR]