Search

Background: The use of frameless stereotactic robotic technology has rapidly expanded since the Food and Drug Administration's approval of the Robotic Surgical Assistant (ROSA) in 2012. Although the use of the ROSA robot has greatly augmented stereotactic placement of intracerebral stereoelectroencephalography (sEEG) for the purposes of epileptogenic focus identification, the preoperative planning stages remain limited to computer software., Objective: To describe the use of a 3-dimensionally (3D)-printed patient model in the preoperative planning of ROSA-assisted depth electrode placement for epilepsy monitoring in a pediatric patient., Methods: An anatomically accurate 3D model was created and registered in a preoperative rehearsal session using the ROSA platform. After standard software-based electrode trajectory planning, sEEG electrodes were sequentially placed in the 3D model., Results: Utilization of the 3D-printed model enabled workflow optimization and increased staff familiarity with the logistics of the robotic technology as it relates to depth electrode placement. The rehearsal maneuvers enabled optimization of patient head positioning as well as identification of physical conflicts between 2 electrodes. This permitted revision of trajectory planning in anticipation of the actual case, thereby improving patient safety and decreasing operative time., Conclusion: Use of a 3D-printed patient model enhanced presurgical positioning and trajectory planning in the placement of stereotactic sEEG electrodes for epilepsy monitoring in a pediatric patient. The ROSA rehearsal decreased operative time and increased efficiency of electrode placement., (Copyright © 2019 by the Congress of Neurological Surgeons.)

Background: The use of frameless stereotactic robotic technology has rapidly expanded since the Food and Drug Administration's approval of the Robotic Surgical Assistant (ROSA™) in 2012. Although the safety and accuracy of the ROSA platform has been well-established, the introduction of complex robotic technology into an existing surgical practice poses technical and logistical challenges particular to a given institution., Objectives: To better facilitate the integration of new surgical equipment into the armamentarium of a thriving pediatric neurosurgery practice by describing the use of a three-dimensional (3D)-printed patient model with in situ 3D-printed tumor for presurgical positioning and trajectory optimization in the stereotactic biopsy of a pontine lesion in a pediatric patient., Methods: A 3D model was created with an added silicone mock tumor at the anatomical position of the lesion. In a preoperative rehearsal session, the patient model was pinned and registered using the ROSA platform, and a mock biopsy was performed targeting the in Situ silicone tumor., Results: Utilization of the 3D-printed model enabled workflow optimization and increased staff familiarity with the logistics of the robotic technology. Biopsy trajectory successfully reached intralesional tissue on the 3D-printed model. The rehearsal maneuvers decreased operative and intubation time for the patient and improved operative staff familiarity with the robotic setup., Conclusion: Use of a 3D-printed patient model enhanced presurgical positioning and trajectory planning in the biopsy of a difficult to reach pontine lesion in a pediatric patient. The ROSA rehearsal decreased operative time and increased staff familiarity with a new complex surgical equipment., (Copyright © 2019 by the Congress of Neurological Surgeons.)