Search

AbstractThe U.S. Department of Energy designated the Advanced Test Reactor (ATR) a National Scientific User Facility (NSUF) in April 2007 to support U.S. research in nuclear science and technology. As a user facility, the ATR is supporting new users from universities, laboratories, and industry, as they conduct basic and applied nuclear research and development to advance the nation’s energy security needs. A key component of the ATR NSUF effort is to develop and evaluate new in-pile instrumentation techniques that are capable of providing measurements of key parameters during irradiation. This paper describes the strategy for determining what instrumentation is needed and the program for developing new or enhanced sensors that can address these needs. Accomplishments from this program are illustrated by describing new sensors now available and under development for in-pile measurement of temperature at various irradiation locations in the ATR.

AbstractA key component of the Advanced Test Reactor (ATR) National Scientific User Facility (NSUF) effort is to expand instrumentation available to users conducting irradiation tests in this unique facility. In particular, development of sensors capable of providing real-time measurements of key irradiation parameters is emphasized because of their potential to increase data fidelity and reduce posttest examination costs. This paper describes the strategy for identifying new instrumentation needed for ATR irradiations and the program underway to develop and evaluate new sensors to address these needs. Accomplishments from this program are illustrated by describing new sensors now available to users of the ATR NSUF. In addition, progress is reported on current research efforts to provide improved in-pile instrumentation to users.

AbstractSeveral options have been identified that could further enhance the reliability and extend the applicability of high-temperature irradiation-resistant thermocouples (HTIR-TCs) developed by the Idaho National Laboratory (INL) for in-pile testing, allowing their use in temperature applications as high as 1800%C.The INL and the University of Idaho (UI) investigated these options with the ultimate objective of providing recommendations for alternate thermocouple designs that are optimized for various applications. This paper reports results from INL/UI investigations. Results are reported from tests completed to evaluate the ductility, resolution, transient response, and stability of thermocouples made from specially formulated alloys of molybdenum and niobium,not considered in initial HTIR-TC development. In addition, this paper reports insights gained by comparing the performance of HTIR-TCs fabricated with various heat Ntreatments and alternate geometries.

Traditional methods for measuring in-pile temperatures degrade above 1100°C. Hence, the Idaho National Laboratory (INL) initiated a project to explore the use of specialized thermocouples for high temperature in-pile applications. Efforts to develop, fabricate, and evaluate specialized high-temperature thermocouples for in-pile applications suggest that several material combinations are viable. Tests show that several low-neutron cross-section candidate materials resist material interactions and remain ductile at high temperatures. In addition, results indicate that the candidate thermoelements have a thermoelectric response that is single-valued and repeatable with acceptable resolution. The selection of the thermocouple materials depends on desired peak temperature and accuracy requirements. For applications at or above 1600°C, tests indicate that thermocouples having doped molybdenum and Nb-1%Zr thermoelement wires, HfO2insulation, and a Nb-1%Zr sheath could be used.INL has worked to optimize this thermocouple’s stability. With appropriate heat treatment and fabrication approaches, results indicate that thermal cycling effects on this thermocouple’s calibration is minimized. INL initiated a series of high-temperature (1200 to 1800°C) long-duration (up to 6 months) tests to assess the long-term stability of these thermocouples. Initial results indicate that the INL-developed thermocouple’s thermoelectric response is very stable. Typically, <20°C drift was observed in a 4000-h test at 1200°C. In comparison, commercially available types K and N thermocouples included in these 1200°C tests experienced drifts up to 110°C.