Search

Understanding the interaction between the fusion plasma and the plasma-facing materials (PFMs) is crucial for achieving the optimal performance, safety, and lifetime of the fusion devices. Relevant materials have been intensely studied to determine fuel retention and the composition of the co-deposited layers on the PFMs by depth profile analysis using Laser-Induced Breakdown Spectroscopy (LIBS) and Calibration-Free (CF)-LIBS. However, the comparison between the layers containing a mixture of different (seeding) gases using LIBS, has not been studied systematically. Consequently, the aim of this work is the LIBS depth profile analysis of Be-based samples containing the fuel (D) and one of the seeding gases (N, Ne, He) with variable concentrations to study the potential impact on fuel retention in the PFMs. The LIBS measurements were performed using Nd:YAG laser (1064 nm) under Ar atmosphere (at 2 and 100 mbar). In LIBS the ablation rate was evaluated, spectral lines of all relevant elements except N and Ne were detected and compared with the SIMS depth profiles. The reasons for the non-detectability of Ne are discussed in detail.

In this paper the Laser Induced Breakdown Spectroscopy (LIBS) measurement of the deuterium (used as a proxy for tritium) retained in and the surface elemental composition of the FTU Mo (TZM) toroidal limiter tiles, carried out from remote (∼2.5 m) during short breaks of the operations or during machine maintenance, are reported. Single pulse technique has been used with the FTU vessel under high vacuum or in Nitrogen or Argon atmosphere. In vacuum experiments Dα and Hα lines have been detected with good resolution, while in Ar atmosphere (5 × 104 Pa) the two lines were partially overlapped due to Stark broadening. First results of measurements in N2 atmosphere (105 Pa) showed no presence of Dα and Hα lines. These measurements were also carried out for supporting the foreseen use of a robotic arm for an extended LIBS analysis of retained deuterium in the FTU vessel components. Keywords: LIBS, FTU tokamak, Toroidal limiter, Deuterium retention

Laser Induced Breakdown Spectroscopy (LIBS) provides chemical information from atomic and ionic plasma emissions generated by laser vaporization of a sample. At the ENEA research center, in collaboration with IPPLM, an equipment has been set up to qualitatively and quantitatively determine the chemical composition of impurities deposited on Plasma Facing Components (PFC). The strength of the LIBS, for its capability of light elements detection, is fully exploited to determine the deuterium content since this element can be considered as the best choice proxy for tritium; the latter being is of great importance in assessing safe conditions to assure the continuous operation in nuclear fusion tokamak.Here we present the results of the Double Pulse LIBS (DP-LIBS) probing of deuterated samples with the simultaneous optical detection by medium-resolution and high-resolution spectrometer. Deuterium emission at 656.1nm has been detected then the elemental composition has been quantified by applying the Calibration Free (CF) approach. The obtained results demonstrate that the DP-LIBS technique combined with CF analysis is suitable for the quantitative determination of tritium content inside the PFCs of next fusion devices like ITER.