Search

QUEST (Q-shu university experiment with steady state spherical tokamak) is a midsize spherical tokamak capable of steady-state operation, comprising all-metal plasma-facing walls and a hot wall (HW) to address issues pertaining to fuel particle balance. The HW was installed summer 2014. Quantitative analysis pertaining to the HW at 373 K is carried out, and clarify the quantitative impact of shot history that obviously appears in wall stored hydrogen just before the discharge at the wall temperature. The model indicates the plasma-induced deposition layer play an essential role in fuel particle balance. A clear temperature dependence of fuel recycling was observed using outgassing just after plasma termination and played an essential role in regulation of particle balance. Consequently, long duration discharges lasting more than 1 h has been obtained at wall temperature, TW

This research investigated fuel particle balance during long duration discharge in an all-metal plasma facing wall (PFW) through intensive QUEST execution. A simple wall model including the plasma-induced deposition layer that creates hydrogen (H) barriers, called the H barrier model, was established. A simple calculation, based on a combination of H state rate equations and the H barrier model, was applied to real plasma in the early phase of its longest discharge. The model accurately reconstructed the evolutions of electron density and wall-stored H over time, proper values are chosen for the parameters that are difficult to determine experimentally. Comparative calculations that used the H barrier and a fully reflective models, predicted significant impacts of wall models on the plasma density time response and value of electron density, indicating that a proper wall model should be developed for all-metal PFW devices. Keywords: Fuel particle balance, steady state operation, Hydrogen barrier model, QUEST

To study radial distribution of hydrogen flux in peripheral plasma in long duration tokamak discharges, permeation and Langmuir reciprocate probes are used. The atomic hydrogen flux to the walls at several radial positions is deduced from the permeation flux. Contribution of the ions to the hydrogen flow is deduced from the Langmuir probe ion saturation current. It is found, that the atomic hydrogen has the most contribution to the hydrogen flow behind the plasma facing components (PFCs), while the ion flux there is negligible. The atomic flux behind the PFCs drops to the value of F~4.3×1015H/m2/s, which is ~6 % of that just in front of PFCs, F~7.7×1016H/m2/s.

A spectroscopic system with multiple viewing chords was developed for QUEST (Q-shu University Experiment with Steady-State Spherical Tokamak) to measure the spatial distribution of ion toroidal velocities in discharges sustained by electron cyclotron resonance heating (ECH). Twenty-four viewing chords were aligned in the midplane and C III emission line spectra were measured for three types of ECH discharge under different magnetic field configurations. By applying an inversion method to the measured spectra, we evaluated the radial distributions of C2+ ion emissivity, temperature, and toroidal velocity. The error in the evaluated velocity was estimated to be less than 5 km/s. It was found that the velocity depends on the magnetic field configuration.

In order to understand the atomic hydrogen distribution in different kinds of plasma and its influence on the recycling, two kinds of plasmas were used: non-confined annular electron cyclotron resonance (ECR) and confined long duration plasmas. The permeation probes are used to measure directly the atomic hydrogen flux at several poloidal positions. The permeation through metals due to the ion and atom component of the hydrogen flux to the wall is indistinguishable. To estimate the contribution of the ions directly, Langmuir probes were used. The Гinc profile behind the plasma facing components (PFCs) is almost constant, ∼2 ×1018 H/s/m2.