Search

The ACtive TARget and Time Projection Chamber (ACTAR TPC) is a novel gas-filled detector that has recently been constructed at GANIL. This versatile detector is a gaseous thick target that allows the tracking of charged particles in three dimensions and provides a precise reaction energy reconstruction from the vertex position. A commissioning experiment using resonant scattering of a 3.2 MeV/nucleon 18O beam on an isobutane gas (proton) target was performed. The beam and the heavy scattered ions were stopped in the gas volume, while the light recoil left the active volume and were stopped in auxiliary silicon detectors. A dedicated tracking algorithm was applied to determine the angle of emission and the length of the trajectory of the ions, to reconstruct the reaction kinematics used to built the excitation functions of the 1 H(18O, 18O) 1 H and 1 H(18O, 15N) 4 He reactions. In this article, we describe the design of the detector and the data analysis, that resulted in center of mass reaction energy resolutions of 38(4) keV FWHM and 54(9) keV FWHM for the proton and alpha channels, respectively. [ABSTRACT FROM AUTHOR]

Abstract ACTARSim is a framework based on Geant4 and ROOT to simulate the response of active targets for nuclear physics experiments with radioactive beams. In this paper, we present the performance of the simulations for the energy-loss profile, total energy, range and angular resolution of the reconstructed track. Validation of the ACTARSim software against experimental data was performed in iC 4 H 10 with a mixed alpha source using the ACTAR TPC demonstrator. The results show a good agreement with the simulations indicating the validity of the models used in ACTARSim for α -particles in iC 4 H 10. [ABSTRACT FROM AUTHOR]

The design, realization and operation of a prototype or “demonstrator” version of an active target and time projection chamber (ACTAR TPC) for experiments in nuclear physics is presented in detail. The heart of the detection system features a micromegas gas amplifier coupled to a high-density pixelated pad plane with square pad sizes of 2 × 2 mm 2 . The detector has been thoroughly tested with several different gas mixtures over a wide range of pressures and using a variety of sources of ionizing radiation including laser light, an α -particle source and heavy-ion beams of 24 Mg and 58 Ni accelerated to energies of 4.0 MeV/u. Results from these tests and characterization of the detector response over a wide range of operating conditions will be described. These developments have served as the basis for the design of a larger detection system that is presently under construction. [ABSTRACT FROM AUTHOR]

With the recent development of active targets and time projection chambers (ACTAR TPC) as detectors for fundamental nuclear physics experiments, the need arose for charge collection planes with a high density of readout channels. In order to fulfill the mechanical constraints for the ACTAR TPC device, we designed a pad-plane based on a metal-core circuit with an conceptually simple design and routing for signal readout, named FAKIR (in reference to a fakir bed of nails). A test circuit has been equipped with a micro mesh gaseous structure ( micromegas ) for signal amplification and a dedicated readout electronics. Test measurements have been performed with an 55 Fe X-ray source giving an intrinsic energy resolution (FWHM) of 22 ± 1 % at 5 . 9 keV , and with a 3-alpha source for which a resolution of about 130 ± 20 keV at 4 . 8 MeV has been estimated. The pad-plane has been mounted into a reduced size demonstrator version of the ACTAR TPC detector, in order to illustrate charged particle track reconstruction. The tests preformed with the X-ray and the 3-alpha sources shows that results obtained from pads signals are comparable to the intrinsic result from the micro-mesh signal. In addition, a simple alpha particle tracks analysis is performed to demonstrate that the pad plane allows a precise reconstruction of the direction and length of the trajectories. [ABSTRACT FROM AUTHOR]

An experiment was conducted at the GANIL/LISE3 facility to produce the 1 0 + isomer of 54 Ni and measure its proton radioactivity decay branches. The proton detection was achieved with the ACTAR TPC device that enabled the separation of the small signal of the emitted proton from the large signal of the implanted ion, while the decay half-life is of the order of 150 ns. From the measured data, the emitted proton track length and the decay time of the ion can be extracted simultaneously. The full proton radioactivity pattern could be established, with two emission branches and their relative branching ratio. Data processing and analysis that allowed to identify and separate the ion and the proton signals in order to reconstruct the particles trajectories and decay time are detailed. The evaluation of the detection efficiency for the proton radioactivity branches based on a full simulation is described. [ABSTRACT FROM AUTHOR]