Search

The Isochronous Mass Spectrometry (IMS) is a powerful technique developed in heavy-ion storage rings for measuring masses of very short-lived exotic nuclei. The IMS is based on the isochronous setting of the ring. One of the main parameters of this setting is the transition energy γ t . It has been a challenge to determine the γ t and especially to monitor the variation of γ t during experiments. In this paper we introduce a method to measure the γ t online during IMS experiments by using the acquired experimental data. Furthermore, since the storage ring has (in our context) a relatively large momentum acceptance, the variation of the γ t across the ring acceptance is a source of systematic uncertainty of measured masses. With the installation of two time-of-flight (TOF) detectors, the velocity of each stored ion and its revolution time are simultaneously available for the analysis. These quantities enabled us to determine the γ t as a function of orbital length in the ring. The presented method is especially important for future IMS experiments planned at the new-generation storage ring facilities FAIR in Germany and HIAF in China. [ABSTRACT FROM AUTHOR]

Abstract: In isochronous mass spectrometry (IMS) established in heavy-ion storage rings the revolution times of the stored secondary ions should be independent of their velocity spread. However, this isochronous condition is fulfilled only in first order and in a small range of revolution times. To correct for the non-isochronicity an additional measure of the velocity or magnetic rigidity of each stored ion is required. For this purpose two new time-of-flight (TOF) detectors were installed in a straight section of the experimental Cooler Storage Ring CSRe in Lanzhou. The performance of the new time-of-flight (TOF) detectors, which is crucial for the achievable efficiencies and mass resolving power, was significantly improved. The time resolution of the TOF detector in offline tests was . The detector setup was put into operation with a stable beam of 78Kr. [Copyright &y& Elsevier]

Abstract: Accuracy of nuclear mass measurements in storage rings depends critically on the accuracy with which the revolution times of stored ions can be obtained. In such experiments, micro-channel plates (MCP) are used as timing detectors. Due to large phase space of injected secondary beams, a large number of ions cannot be stored in the ring and is lost within the first few revolutions. However, these ions interact with the detector and can saturate the MCP and thus deteriorate its performance. In order to eliminate such effects, a fast, pulsed high-voltage power supply (PHVPS) has been employed which keeps the detector switched-off during the first few revolutions. The new detector setup was taken into operation at the Experimental Cooler-Storage-Ring CSRe in Lanzhou and resulted in a significant improvement of the detector amplitude and efficiency characteristics. [Copyright &y& Elsevier]