Search

For a long time the necessity of having intense positron beams to get a high rate of events with fixed targets as with e+e− collisions, led to conventional positron sources using high energy and high intensity electron beams generating bremsstrahlung photons in thick high Z targets. The inconveniences for such scheme, heat load and large emittance, are underlined. Alternative ways aiming to provide a high number of photons impinging on rather thin conversion targets have been developed: they are using magnetic undulators, laser Compton backscattering and channeling radiation in axially oriented crystals. A brief description of these methods is given. However, the emphasis is put here on the channeling radiation. The advantages of channeling radiation, described by M.Kumakhov and others, were confirmed by many simulations and experiments. We are reporting, hereafter, on two schemes: positron all-crystal converters involving thick crystals where photon radiation and e+e− pair creation are occurring in the crystal and hybrid sources where the two functions are separated. With the hybrid scheme, including a thin crystal-radiator and a thick amorphous-converter, the heat load and the local deposited energy density can be lowered. Simulations and experiments related to these two schemes are reported. Further developments concerning the converter, granular instead of bulk, are providing additional advantages. The promising, already gathered results led to consider these kinds of positron sources for future e-e+ colliders. More physicists, from different laboratories, concerned by the studies on positron sources are now contributing in this field. [ABSTRACT FROM AUTHOR]

Accelerator-based searches for dark matter are aiming for high sensitivity and need an experimental setup with high luminosity. This field of research is often called intensity frontier physics. One of the best motivated portals of interaction between dark matter and ordinary matter is a dark photon which could be observed as a resonance in the invariant mass of the decay products. Electron–positron collisions are known to be the cleanest interaction for such a study. In this paper we propose a scheme for a collider which allows for a luminosity of a few orders of magnitude higher than could be obtained in a conventional symmetric collider and with a few times higher accessible mass than is possible using a positron beam and a fixed target approach. The key concept is based on asymmetric energies: a high-energy circulating positron beam and a low-energy high-intensity electron beam, and optimization of the beam interaction region. We present here a configuration of a collision region of 10 MeV electron and 4 GeV positron beams. [ABSTRACT FROM AUTHOR]

Injectors and in particular the positron production systems are a crucial element in linear and circular colliders. The proposed FCC-ee injector linac accelerates both electrons and positrons up to 6 GeV in order to be injected into the Pre-Booster Ring (PBR) with a high intensity of 3.5 nC per bunch for the Z running mode. The current design baseline of the FCC-ee injector linac is based on the SuperKEKB scheme, in which the electron and the positron beams share the same linacs with a fixed target configuration on-axis hole for electron beam passage. One of the main drawbacks of this scheme is the positron production efficiency at the exit of the injector linac. In order to achieve a better performance and a higher positron yield, in this paper we study different bypass injection options. Start-to-end design and optimization for beam production, acceleration and transport from the feeding electron source to the positron damping ring are also being presented. [ABSTRACT FROM AUTHOR]