Search

We retrospectively investigated the success rate of pulmonary arteriovenous separation in a single-phase computed tomography (CT) protocol using the estimated time of arrival (ETA) method. A total of 223 patients who underwent a single-phase CT protocol using the ETA method for pulmonary arteriovenous separation were included in the analysis. Dual source CT (SOMATOM Force, SIEMENS) was used for imaging. The tube voltage was 80 kVp, and the scan mode was turbo flash spiral mode. CT values of main pulmonary artery (MPA), peripheral pulmonary artery (pPA), peripheral pulmonary vein (pPV), left atrium (LA), ascending aorta (AAo) and descending aorta (DAo) were measured. When the difference in CT values on the central side was 100 Hounsfield unit (HU) or more, it was judged that the separation was successful. The mean CT values were 671.9±154 HU for MPA, 424.4±81.2 HU for LA, 551.1±142.6 HU for pPA, 351.6±94.0 HU for pPV, 362.2±75.8 HU for AAo, and 282.7±83.7 HU for DAo. The mean difference in CT values of the pulmonary artery and vein was 247.5±138.9 HU on the central side and 199.5±133.0 HU on the peripheral side. There were 90.1% of cases where the difference in CT values on the central side was 100 HU or more. In addition, a strong positive correlation (r=0.849, p<0.001) was found between the CT value of MPA and the CT value difference on the central side. The success rate of pulmonary arteriovenous separation by the ETA method, which is a method that enables stable pulmonary arteriovenous separation, was 90.1%.

The restlessness of young children often causes motion artifacts on CT images. We devised a new animation projector system (CT Theater) that enables a child to view an animation during a pediatric head CT examination. The purpose of this study is to assess the usefulness on a children of a video viewed during a head CT scan. Children of 3-10 years old who underwent head CT (SOMATOM Definition Flash, SOMATOM Force; Siemens) were analyzed for a period from 6 months before, to 6 months after, introduction of the projector system (before: n=46, after: n=29). Mobile projector (MP-CL1; Sony) connected with tablet device (iPad; Apple) was put on the CT table near the child's head. An animation was projected on the child's line of sight inside the gantry. The animation is projected on the line of sight of the child such that the projector moves with the child on the table. The number of requests for use made by children was 28/29 (96.6%). The presence of images without motion artifacts decreased significantly after introduction (before/after introduction: 84.8% vs 100%, p=0.03). The overall examination success rate tended to increase after introduction (84.8% vs 92.9%, p=0.26). The overall examination time was significantly reduced (92.4±42.4 s vs 65.1±47.3 s, p<0.001). We developed an animation projector system that shortened examination time and decreased motion artifacts in pediatric head CT.

We have developed an estimated time of arrival (ETA) method as a new single-phase scan for pulmonary artery/vein separation. This method enables differentiation of CT values between arteries and veins by means of two-step consecutive injection of contrast medium based on the pulmonary circulation time. This paper presents an overview of the ETA method and scan technique. Since the ETA method is a single-phase scan, it uses a low radiation dose compared with the conventional multi-phase scan. Moreover, this method eliminates gaps due to breath holding. The ETA method can detect irregularities and obtain high-quality pulmonary artery/vein separation 3D-CT images.

The aim of this study was to investigate the relationship between partial electrical reset (PER) and CT scan parameters (tube voltage, tube current, rotation time, and product of tube current and rotation time in mAs). A cardiac resynchronization therapy pacemaker (Insync 8040, Medtronic Inc., Tokyo) and 320 area detector CT scanner (Aquilion ONE, Toshiba medical systems, Otawara, Japan) with volume scan were used. The pacemaker was put in DDD mode. The PERs were interpreted using both the programmer's wave forms and error messages. The exposure was repeated 5 times per CT setting. The pacemaker was placed on the anterior wall and upper side of a chest phantom. Each CT scan was performed using the following parameters: tube voltage of 80, 100, 120, and 135 kV; tube current of 50-550 mA; and rotation time of 0.35-1.5 s. PERs were observed at 100, 120, and 135 kV, and more PERs were observed as the tube voltage increased. The PER tube current decreased as the rotation time was increased. In contrast, the PER tube current and rotation time product (mAs) increased as the rotation time was increased. More specifically, the radiation dose rate was the affected factor of the PERs. To avoid PER of pacemakers, CT scan parameters with lower radiation dose rates (low rather than high tube current and rotational time) is recommended. In conclusion, our results will help with CT scans of patients who have implantable cardiac devices (included pacemakers and cardioverter defibrillators).

For convenience of outpatients, mammographies of outpatients are often taken after the injection of a radionuclide. In this study, we investigated the effects of gamma rays emitted by a patient onto imaging plates (IPs). We used a flat container filled with (99m)Tc solution as a planar source to irradiate gamma rays onto IPs. We changed irradiation times on each IP, and took radiographies of an ACR-specified 156 model phantom and AGH-D210F phantom. We evaluated radiography images, using visual evaluation, and profile curves, histograms, and CNR and RMS granularities analyses. The results indicated that the depiction ability of a fibrous part began to fall when the irradiation time exceeded 3 minutes. With an increase in irradiation time, an increase in pixel value and RMS granularity value and a decrease in CNR value were observed. In conclusion, IP exposed by gamma rays influenced the evaluation of phantom images.