Search

Inorganic sulfide solid-state electrolytes, especially Li6PS5X (X = Cl, Br, I), are considered viable materials for developing all-solid-state batteries because of their high ionic conductivity and low cost. However, this class of solid-state electrolytes suffers from structural and chemical instability in humid air environments and a lack of compatibility with layered oxide positive electrode active materials. To circumvent these issues, here, we propose Li6+xMxAs1-xS5I (M=Si, Sn) as sulfide solid electrolytes. When the Li6+xSixAs1-xS5I (x = 0.8) is tested in combination with a Li-In negative electrode and Ti2S-based positive electrode at 30 °C and 30 MPa, the Li-ion lab-scale Swagelok cells demonstrate long cycle life of almost 62500 cycles at 2.44 mA cm−2, decent power performance (up to 24.45 mA cm−2) and areal capacity of 9.26 mAh cm−2 at 0.53 mA cm−2. Stable inorganic solid-state electrolytes are crucial for reliable all-solid-state battery development. Here, the authors report a Li-In|Li6.8Si0.8As0.2S5I|Ti2S lab-scale cell with a long cycle life of almost 62500 cycles at 2.44 mA cm−2, 30 °C and 30 MPa. [ABSTRACT FROM AUTHOR]

Artificial-intelligence-generated content has driven explosive data traffic growth in data-center interconnects. Traditional direct detection solutions struggle with limited spectral efficiency and distance, prompting the shift to coherent optics for cost-sensitive short-reach links. One specific challenge is integrating low-cost lasers while overcoming severe phase noise on high-order modulation formats. Here, we propose a residual carrier modulation scheme for precise and efficient carrier frequency and phase recovery. The residual optical carrier can continuously track phase fluctuations without redundancy compared with discrete time-domain pilots, and address the digital-to-analog convertor resolution reduction issue of frequency-domain digital pilots. In proof-of-concept experiments, we transmit a net 1-Tb/s probabilistic-shaped 256-ary quadrature amplitude modulated (PS-256-QAM) signal using a 3 MHz distributed feedback (DFB) laser. Our scheme improves bitrate by 41% compared to conventional time-domain pilots, achieving a record laser linewidth sum and symbol duration product of 6.89 × 10−5. This approach supports MHz linewidth DFB lasers in low-cost coherent optical communications. The authors propose a residual carrier modulation scheme to overcome laser phase noise in coherent optical systems. The method improves bitrate and spectral efficiency by 41% using low-cost lasers, and showcase potential in cost-sensitive scenarios. [ABSTRACT FROM AUTHOR]

The further practical applications of Li-rich layered oxides are impeded by voltage decay and redox asymmetry, which are closely related to the structural degradation involving irreversible transition metal migration. It has been demonstrated that the superstructure ordering in O2-type materials can effectively suppress voltage decay and redox asymmetry. Herein, we elucidate that the absence of this superstructure ordering arrangement in a Ru-based O2-type oxide can still facilitate the highly reversible transition metal migration. We certify that Ru in superstructure-free O2-type structure can unlock a quite different migration path from Mn in mostly studied cases. The highly reversible migration of Ru helps the cathode maintain the structural robustness, thus realizing terrific capacity retention with neglectable voltage decay and inhibited oxygen redox asymmetry. We untie the knot that the absence of superstructure ordering fails to enable a high-performance Li-rich layered oxide cathode material with suppressed voltage decay and redox asymmetry. The ordering of superstructures plays a critical role in mitigating transition metal migration, voltage decay, and maintaining redox symmetry in Li-rich layered oxides. Here, this study reveals that even in the absence of such superstructure ordering, cathodes can still attain these crucial characteristics. [ABSTRACT FROM AUTHOR]

Spider silk exhibits an excellent combination of high strength and toughness, which originates from the hierarchical self-assembled structure of spidroin during fiber spinning. In this work, superfine nanofibrils are established in polyelectrolyte artificial spider silk by optimizing the flexibility of polymer chains, which exhibits combination of breaking strength and toughness ranging from 1.83 GPa and 238 MJ m−3 to 0.53 GPa and 700 MJ m−3, respectively. This is achieved by introducing ions to control the dissociation of polymer chains and evaporation-induced self-assembly under external stress. In addition, the artificial spider silk possesses thermally-driven supercontraction ability. This work provides inspiration for the design of high-performance fiber materials. [ABSTRACT FROM AUTHOR]

These authors contributed equally: Ke-Qiong Deng, Aibing Wang, Yan-Xiao Ji. Correction to: I Nature Communications i https://doi.org/10.1038/ncomms11432, published online 01 June 2016 The original version of this article contained labeling errors in the uncropped western blot scans in Supplementary Fig. Author Correction: Suppressor of IKK is an essential negative regulator of pathological cardiac hypertrophy. [Extracted from the article]

Fungal pathogens typically use secreted effector proteins to suppress host immune activators to facilitate invasion. However, there is rarely evidence supporting the idea that fungal secretory proteins contribute to pathogenesis by transactivating host genes that suppress defense. We previously found that pathogen Magnaporthe oryzae induces rice Bsr-d1 to facilitate infection and hypothesized that a fungal effector mediates this induction. Here, we report that MoSPAB1 secreted by M. oryzae directly binds to the Bsr-d1 promoter to induce its expression, facilitating pathogenesis. Amino acids 103-123 of MoSPAB1 are required for its binding to the Bsr-d1 promoter. Both MoSPAB1 and rice MYBS1 compete for binding to the Bsr-d1 promoter to regulate Bsr-d1 expression. Furthermore, MoSPAB1 homologues are highly conserved among fungi. In particular, Colletotrichum fructicola CfSPAB1 and Colletotrichum sublineola CsSPAB1 activate kiwifruit AcBsr-d1 and sorghum SbBsr-d1 respectively, to facilitate pathogenesis. Taken together, our findings reveal a conserved module that may be widely utilized by fungi to enhance pathogenesis. Magnaporthe oryzae effector MoSPAB1 enters rice nuclei to bind to the promoter of the immunity-brake gene Bsr-d1 and activates its expression by competing with rice MYBS1, which constitute a conserved module that facilitates fungal pathogenesis. [ABSTRACT FROM AUTHOR]

Renal inflammation and fibrosis are the common pathways leading to progressive chronic kidney disease (CKD). We previously identified hematopoietic cell kinase (HCK) as upregulated in human chronic allograft injury promoting kidney fibrosis; however, the cellular source and molecular mechanisms are unclear. Here, using immunostaining and single cell sequencing data, we show that HCK expression is highly enriched in pro-inflammatory macrophages in diseased kidneys. HCK-knockout (KO) or HCK-inhibitor decreases macrophage M1-like pro-inflammatory polarization, proliferation, and migration in RAW264.7 cells and bone marrow-derived macrophages (BMDM). We identify an interaction between HCK and ATG2A and CBL, two autophagy-related proteins, inhibiting autophagy flux in macrophages. In vivo, both global or myeloid cell specific HCK-KO attenuates renal inflammation and fibrosis with reduces macrophage numbers, pro-inflammatory polarization and migration into unilateral ureteral obstruction (UUO) kidneys and unilateral ischemia reperfusion injury (IRI) models. Finally, we developed a selective boron containing HCK inhibitor which can reduce macrophage pro-inflammatory activity, proliferation, and migration in vitro, and attenuate kidney fibrosis in the UUO mice. The current study elucidates mechanisms downstream of HCK regulating macrophage activation and polarization via autophagy in CKD and identifies that selective HCK inhibitors could be potentially developed as a new therapy for renal fibrosis. The authors previously reported HCK was associated with kidney inflammation and fibrosis. Here, they further unravel a mechanism of HCK regulating autophagy within macrophages, altering their polarization, proliferation, and migration and they also developed a more selective HCK inhibitor. [ABSTRACT FROM AUTHOR]

Stable lithium metal negative electrodes are desirable to produce high-energy batteries. However, when practical testing conditions are applied, lithium metal is unstable during battery cycling. Here, we propose poly(2-hydroxyethyl acrylate-co-sodium benzenesulfonate) (PHS) as negative electrode protective layer. The PHS contains soft poly (2-hydroxyethyl acrylate) and poly(sodium p-styrene sulfonate), which improve electrode flexibility, connection with the Cu current collector and transport of Li ions. Transmission electron cryomicroscopy measurements reveal that PHS induces the formation of a solid electrolyte interphase with a fluorinated rigid and crystalline internal structure. Furthermore, theoretical calculations suggest that the -SO3- group of poly(sodium p-styrene sulfonate) promotes Li-ion motion towards interchain migration through cation-dipole interaction, thus, enabling uniform Li-ion diffusion. Electrochemical measurements of Li | |PHS-coated-Cu coin cells demonstrate an average Coulombic efficiency of 99.46% at 1 mA/cm2, 6 mAh/cm2 and 25 °C. Moreover, when the PHS-coated Li metal negative electrode is paired with a high-areal-capacity LiNi0.83Co0.11Mn0.06O2-based positive electrode in multi-layer pouch cell configuration, the battery delivers an initial capacity of 6.86 Ah (corresponding to a specific energy of 489.7 Wh/kg) and, a 91.1% discharge capacity retention after 150 cycles at 2.5 mA/cm2, 25 °C and 172 kPa. Stable lithium metal electrodes are needed to produce high-energy batteries. Here, authors reported poly(2-hydroxyethyl acrylate-co-sodium benzenesulfonate) as a lithium metal protective layer and the production of a 490 Wh/kg class Li | |LiNi0.83Co0.11Mn0.06O2 pouch cell. [ABSTRACT FROM AUTHOR]

Great progress has been achieved in p-type SnS thermoelectric compound recently, while the stagnation of the n-type counterpart hinders the construction of thermoelectric devices. Herein, n-type sulfide PbSnS2 with isostructural to SnS is obtained through Pb alloying and achieves a maximum ZT of ~1.2 and an average ZT of ~0.75 within 300–773 K, which originates from enhanced power factor and intrinsically ultralow thermal conductivity. Combining the optimized carrier concentration by Cl doping and enlarged Seebeck coefficient through activating multiple conduction bands evolutions with temperature, favorable power factors are maintained. Besides, the electron doping stabilizes the phase of PbSnS2 and the complex-crystal-structure induced strong anharmonicity results in ultralow lattice thermal conductivity. Moreover, a maximum power generation efficiency of ~2.7% can be acquired in a single-leg device. Our study develops a n-type sulfide PbSnS2 with high performance, which is a potential candidate to match the excellent p-type SnS. Direct and reversible conversion between heat and electricity can be achieved in thermoelectric materials. Here, the authors realize high thermoelectric performance in PbSnS2 crystals enabled by multiple bands convergence. [ABSTRACT FROM AUTHOR]

Plants use nitrate and ammonium as major nitrogen (N) sources, each affecting root development through different mechanisms. However, the exact signaling pathways involved in root development are poorly understood. Here, we show that, in Arabidopsis thaliana, either disruption of the cell wall-localized ferroxidase LPR2 or a decrease in iron supplementation efficiently alleviates the growth inhibition of primary roots in response to NH4+ as the N source. Further study revealed that, compared with nitrate, ammonium led to excess iron accumulation in the apoplast of phloem in an LPR2-dependent manner. Such an aberrant iron accumulation subsequently causes massive callose deposition in the phloem from a resulting burst of reactive oxygen species, which impairs the function of the phloem. Therefore, ammonium attenuates primary root development by insufficiently allocating sucrose to the growth zone. Our results link phloem iron to root morphology in response to environmental cues. Ammonium affects plant root development through different mechanisms than nitrate. Here, the authors show that the Arabidopsis cell wall-localized ferroxidase LPR2 is required to attenuate root growth in response to ammonium. [ABSTRACT FROM AUTHOR]

Since most variants that impact polygenic disease phenotypes localize to non-coding genomic regions, understanding the consequences of regulatory element variants will advance understanding of human disease mechanisms. Here, we report that the systemic lupus erythematosus (SLE) risk variant rs2431697 as likely causal for SLE through disruption of a regulatory element, modulating miR-146a expression. Using epigenomic analysis, genome-editing and 3D chromatin structure analysis, we show that rs2431697 tags a cell-type dependent distal enhancer specific for miR-146a that physically interacts with the miR-146a promoter. NF-kB binds the disease protective allele in a sequence-specific manner, increasing expression of this immunoregulatory microRNA. Finally, CRISPR activation-based modulation of this enhancer in the PBMCs of SLE patients attenuates type I interferon pathway activation by increasing miR-146a expression. Our work provides a strategy to define non-coding RNA functional regulatory elements using disease-associated variants and provides mechanistic links between autoimmune disease risk genetic variation and disease etiology. Enhancers shape gene expression patterns and are involved in disease pathogenesis. Here the authors demonstrate a strategy to screen functional regulatory elements for non-coding RNAs ― illustrated with miR-146a ― and link autoimmune disease risk genetic variants to autoimmune disease etiology. [ABSTRACT FROM AUTHOR]

The fatigue performance of high strength aluminum alloys used in planes, trains, trucks and automobiles is notoriously poor. Engineers must design around this important limitation to use Al alloys for light-weighting of transportation structures. An alternative concept for microstructure design for improved fatigue strength is demonstrated in this work. Microstructures are designed to exploit the mechanical energy imparted during the initial cycles of fatigue to dynamically heal the inherent weak points in the microstructure. The fatigue life of the highest strength Aluminum alloys is improved by 25x, and the fatigue strength is raised to ~1/2 the tensile strength. The approach embraces the difference between static and dynamic loading and represents a conceptual change in microstructural design for fatigue. The fatigue performance of high strength aluminum alloys is notoriously poor, leading to design limitations for transportation structures. Here the authors design microstructures to exploit the mechanical energy of fatigue to dynamically heal the microstructural weak points and improve the high cycle fatigue life. [ABSTRACT FROM AUTHOR]

The salinity gradient between seawater and river water is a clean energy source and an alternative solution for the increasing energy demands. A membrane-based reverse electrodialysis technique is a promising strategy to convert osmotic energy to electricity. To overcome the limits of traditional membranes with low efficiency and high resistance, nanofluidic is an emerging technique to promote osmotic energy harvesting. Here, we engineer a high-performance nanofluidic device with a hybrid membrane composed of a silk nanofibril membrane and an anodic aluminum oxide membrane. The silk nanofibril membrane, as a screening layer with condensed negative surface and nanochannels, dominates the ion transport; the anodic aluminum oxide membrane, as a supporting substrate, offers tunable channels and amphoteric groups. Thus, a nanofluidic membrane with asymmetric geometry and charge polarity is established, showing low resistance, high-performance energy conversion, and long-term stability. The system paves avenues for sustainable power generation, water purification, and desalination. Membrane-based reverse electrodialysis is promising for salinity gradient power generation, but achieving efficiency and stability is challenging. Here the authors design silk nanofibril-based hybrid membranes to realize high-performance capture of osmotic energy from ambient waters. [ABSTRACT FROM AUTHOR]