Search

Generating sustainable electricity from ambient humidity and natural evaporation has attracted tremendous interest recently as it requires no extra mechanical energy input and is deployable across all weather and geography conditions. Here, we present a device prototype for enhanced power generation from ambient humidity. This prototype uses both heterogenous materials assembled from a LiCl-loaded cellulon paper to facilitate moisture adsorption and a carbon-black-loaded cellulon paper to promote water evaporation. Exposing such a centimeter-sized device to ambient humidity can produce voltages of around 0.78 V and a current of around 7.5 μA, both of which can be sustained for more than 10 days. The enhanced electric output and durability are due to the continuous water flow that is directed by evaporation through numerous, negatively charged channels within the cellulon papers. The voltage and current exhibit an excellent scaling behavior upon device integration to sufficiently power commercial devices including even cell phones. The results open a promising prospect of sustainable electricity generation based on a synergy between spontaneous moisture adsorption and water evaporation.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

The EU emissions trading system's (ETS) invalidation rule implies that shocks and overlapping policies can change cumulative carbon emissions. This paper explains these mechanisms and simulates the effect of COVID-19, the European Green Deal, and the recovery stimulus package on cumulative EU ETS emissions and allowance prices. Our results indicate that the negative demand shock of the pandemic should have a limited effect on allowance prices and rather translates into lower cumulative carbon emissions. Aligning EU ETS with the 2030 reduction target of -55% might increase allowance prices to 45-94 euro/ton CO2 today and reduce cumulative carbon emissions to 14.2-18.3 GtCO(2) compared to 23.5-33.1 GtCO(2) under a -40% 2030 reduction target. Our results crucially depend on when the waterbed will be sealed again, which is an endogenous market outcome, driven by the EU ETS design, shocks and overlapping climate policies such as the recovery plan. This paper finds that the EU's 2030 reduction target of -55% might correspond to EU ETS allowance prices between 45 and 94 e/ton CO2 today, while the invalidation rule reduces carbon emissions to 14.2 to 18.3 GtCO2 over the EU ETS' remaining lifetime.

Kirigami, a traditional paper cutting art, offers a promising strategy for 2D-to-3D shape morphing through cut-guided deformation. Existing kirigami designs for target 3D curved shapes rely on intricate cut patterns in thin sheets, making the inverse design challenging. Motivated by the Gauss-Bonnet theorem that correlates the geodesic curvature along the boundary with the Gaussian curvature, here, we exploit programming the curvature of cut boundaries rather than the complex cut patterns in kirigami sheets for target 3D curved morphologies through both forward and inverse designs. The strategy largely simplifies the inverse design. Leveraging this strategy, we demonstrate its potential applications as a universal and nondestructive gripper for delicate objects, including live fish, raw egg yolk, and a human hair, as well as dynamically conformable heaters for human knees. This study opens a new avenue to encode boundary curvatures for shape-programing materials with potential applications in soft robotics and wearable devices., Kirigami, a traditional paper cutting art, offers a promising strategy for 2D-to-3D shape morphing through cut-guided deformation. Here, authors report a simple strategy of cut boundary curvature-guided 3D shape morphing and its applications in non-destructive grippers and dynamically conformable heaters.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Recent years have seen the rapid growth of new approaches to optical imaging, with an emphasis on extracting three-dimensional (3D) information from what is normally a two-dimensional (2D) image capture. Perhaps most importantly, the rise of computational imaging enables both new physical layouts of optical components and new algorithms to be implemented. This paper concerns the convergence of two advances: the development of a transparent focal stack imaging system using graphene photodetector arrays, and the rapid expansion of the capabilities of machine learning including the development of powerful neural networks. This paper demonstrates 3D tracking of point-like objects with multilayer feedforward neural networks and the extension to tracking positions of multi-point objects. Computer simulations further demonstrate how this optical system can track extended objects in 3D, highlighting the promise of combining nanophotonic devices, new optical system designs, and machine learning for new frontiers in 3D imaging., Transparent photodetectors based on graphene stacked vertically along the optical axis have shown promising potential for light field reconstruction. Here, the authors develop transparent photodetector arrays and implement a neural network for real-time 3D optical imaging and object tracking.

The temperature scales of screening of local magnetic and orbital moments are important characteristics of strongly correlated substances. In a recent paper X. Deng et al. using dynamic mean-field theory (DMFT) have identified temperature scales of the onset of screening in orbital and spin channels in some correlated metals from the deviation of temperature dependence of local susceptibility from the Curie law. We argue that the scales obtained this way are in fact much larger, than the corresponding Kondo temperatures, and, therefore, do not characterize the screening process. By reanalyzing the results of this paper we find the characteristic (Kondo) temperatures for screening in the spin channel $T_K\approx 100$ K for V$_2$O$_3$ and $T_K\approx 350$ K for Sr$_2$RuO$_4$, which are almost an order of magnitude smaller than those for the onset of the screening estimated in the paper ($1000$ K and $2300$ K, respectively); for V$_2$O$_3$ the obtained temperature scale $T_K$ is therefore comparable to the temperature of completion of the screening, $T^{\rm comp}\sim 25$ K, which shows that the screening in this material can be described in terms of a single temperature scale., This is a post-peer-review, pre-copyedit version of an article published in Matters Arising section of Nature Communications. The final authenticated version is available online at http://dx.doi.org/10.1038/s41467-021-21641-2

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Low-cost flexible microwave circuits with compact size and light weight are highly desirable for flexible wireless communication and other miniaturized microwave systems. However, the prevalent studies on flexible microwave electronics have only focused on individual flexible microwave elements such as transistors, inductors, capacitors, and transmission lines. Thinning down supporting substrate of rigid chip-based monolithic microwave integrated circuits has been the only approach toward flexible microwave integrated circuits. Here, we report a flexible microwave integrated circuit strategy integrating membrane AlGaN/GaN high electron mobility transistor with passive impedance matching networks on cellulose nanofibril paper. The strategy enables a heterogeneously integrated and, to our knowledge, the first flexible microwave amplifier that can output 10 mW power beyond 5 GHz and can also be easily disposed of due to the use of cellulose nanofibril paper as the circuit substrate. The demonstration represents a critical step forward in realizing flexible wireless communication devices., Though flexible microwave integrated circuits (MICs) are desirable for the construction of functional microwave amplifier circuits, realizing low cost III-V-based MMICs remains a challenge. Here, the authors report a heterogeneous integration strategy for the fabrication of flexible low-cost MICs.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Herein, we present an innovative approach for transforming commonly available cellulose paper into a flexible and catalytic current collector for overall water splitting. A solution processed soak-and-coat method of electroless plating was used to render a piece of paper conducting by conformably depositing metallic nickel nanoparticles, while still retaining the open macroporous framework. Proof-of-concept paper-electrodes are realized by modifying nickel-paper current collector with model electrocatalysts nickel-iron oxyhydroxide and nickel-molybdenum bimetallic alloy through electrodeposition route. The paper-electrodes demonstrate exceptional activities towards oxygen evolution reaction and hydrogen evolution reaction, requiring overpotentials of 240 and 32 mV at 50 and −10 mA cm−2, respectively, even as they endure extreme mechanical stress. The generality of this approach is demonstrated by fabricating similar electrodes on cotton fabric, which also show high activity. Finally, a two-electrode paper-electrolyzer is constructed which can split water with an efficiency of 98.01%, and exhibits robust stability for more than 200 h., Water electrolysis provides a means to convert water into carbon-neutral fuels, but current devices are typically heavy, inflexible, or require costly substrates. Here, the authors transform paper and cotton fabrics into efficient, durable, and flexible supports for water-splitting electrocatalysts.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

A natural operational paradigm for distributed quantum and classical information processing involves local operations coordinated by multiple rounds of public communication. In this paper we consider the minimum number of communication rounds needed to perform the locality-constrained task of entanglement transformation and the analogous classical task of secrecy manipulation. Specifically we address whether bipartite mixed entanglement can always be converted into pure entanglement or whether unsecure classical correlations can always be transformed into secret shared randomness using local operations and a bounded number of communication exchanges. Our main contribution in this paper is an explicit construction of quantum and classical state transformations which, for any given $r$, can be achieved using $r$ rounds of classical communication exchanges but no fewer. Our results reveal that highly complex communication protocols are indeed necessary to fully harness the information-theoretic resources contained in general quantum and classical states. The major technical contribution of this manuscript lies in proving lower bounds for the required number of communication exchanges using the notion of common information and various lemmas built upon it. We propose a classical analog to the Schmidt rank of a bipartite quantum state which we call the secrecy rank, and we show that it is a monotone under stochastic local classical operations., Submitted to QIP 2017. Proof strategies have been streamlined and differ from the submitted version

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.